vega-line price list 2011/12
Measurement technology for level, switching, pressure
vega-line – Standard solutions
Quickly and price-favourable
VEGA – world leader in measurement
technology
Easy selection thanks to proven
technology
VEGA is a world leader in continuous level measurement,
vega-line makes you feel confident because the instru-
switching and measurement of process and differential
ments offered here have proven themselves a thousand
pressure. The technology from VEGA delivers reliable
times over. These versions fulfil specifically the typical
data on volume, level and pressure independent of the
requirements of daily practice. Thus, you can quickly and
medium.
easily select the most suitable instrument. You will find all
the information you need in this price list.
vega-line – fast, low cost measurement
technology
Direct, easy and fast
vega-line is the direct distribution channel of VEGA.
You select the solution for your application and order the
Products that are easy to project and that require hardly
suitable product directly from VEGA. By phone, telefax,
any consultation can be ordered quickly and easily by
e-mail or online around the clock at our web-shop. It‘s
telefax, e-mail or via the web-shop. vega-line puts time-
quick and easy. And the instruments also get to you qui-
tested solutions for typical measuring tasks in the areas
ckly, usually within some single days.
of level, switching and pressure at your fingertips.
Large quantities reduce the price
vega-line products are standard solutions that are much
in demand. Large quantities enable cheaper production
methods and reduce time and effort. We pass this benefit on to you.
Order quickly and simply in the web
shop:
www.vega-line.uk
2
www.vega-line.co.uk
Phone 01444 238846
e
es
so
lid


4
VEGASON S 62


6
Pa
g
VEGASON S 61
Ga
s
Bu
lk
Liq
u
ids
s
Content
Level
Ultrasonic
Hydrostatic
VEGAWELL S 51

8
VEGASWING S 51

10
VEGASWING S 52

12
Switching
Vibration
VEGAVIB S 61

14
VEGAWAVE S 61

16
Pressure
Process pressure
VEGABAR S 14


18
VEGABAR S 16


20
System components
Phone 01444 238846
VEGAMET 381
22
VEGATRENN 149A Ex
24
www.vega-line.co.uk
3
VEGASON S 61
Ultrasonic sensor for continuous level measurement for measuring ranges up to 5 m
Application area
The VEGASON S 61 is an ultrasonic sensor for continuous
level measurement of liquids and bulk solids. Typical applications are the measurement of liquids in storage vessels
and open basins. The sensor is suitable for detection of bulk
solids in small vessels or open containers.
The non-contact measuring principle enables a setup without
medium.
Advantages
- Non-contact measurement
- Reliable level measurement, independent of product properties
- Automatic sound running time correction through integrated temperature sensor
Function
Short ultrasonic pulses of approx. 70 kHz are emitted by the
transducer in the direction of the measured product, reflected
by the product surface and received back by the transducer.
Ultrasonic pulses travel at the speed of sound. The time from
emission to reception of the signals is proportional to the level
in the vessel. The adjustment of the sensors is carried out via
the indicating and adjustment module PLICSCOM.
Electrical connection
4…20mA
-
+
1
Display
2
1
1
4
www.vega-line.co.uk
Voltage supply and signal output
Phone 01444 238846
Dimensions
Technical data
~ 69 mm
191 mm
ø 81 mm
20 mm
M20 x 1,5
SW 60
66 mm
G1½
Process pressure
-0.2 … 2 bar
Process temperature
-40 … +80 °C
Measuring range
in liquids: 0.25 … 5 m
in bulk solids: 0.25 … 2 m
Dead band
250 mm
Accuracy
better than 0.2 % or ±10 mm
Output signal
4 … 20 mA
Operating voltage
non-Ex instrument: 14 … 36 V DC
Ex instrument: 14 … 30 V DC
Fault signal
20.5 mA, 22 mA, < 3.6 mA (adjustable)
Material, housing
plastic PBT
Protection
IP 66/IP 67
Material, wetted-parts
PVDF, EPDM
Approval
option: ATEX II 1G, 1/2G, 2G EEx ia IIC T6
You can find further information on our home page under
www.vega-line.de.
ø 39 mm
ø 74 mm
Net price per piece in GBP
564,00
Approval
XX
without
EE
ATEX II 1G, 1/2G, 2G EEx ia IIC T6
–
184,00
Indicating/adjustment module (PLICSCOM)
X
without
A
mounted
–
111,00
SONS61.E
Order number
Accessory
Mounting bracket 200 x 250 mm / 304
2.33437
79,00
Counter nut G1½ / PP
2.10371
8,00
PLICSCOM
Pluggable indicating and adjustment module with menu-driven
PLICSCOM.XB
adjustment, user-friendly clear text display and large, easily readable
digits
Phone 01444 238846
Price
in GBP
111,00
www.vega-line.co.uk
5
VEGASON S 62
Ultrasonic sensor for continuous level measurement for measuring ranges up to 8 m
Application area
The VEGASON S 62 is an ultrasonic sensor for continuous
level measurement of liquids and bulk solids.
Typical applications are the measurement of liquids in storage
vessels and open basins. The sensor is suitable for the
detection of bulk solids in small vessels or silos. You can find
application areas in all industries.
The non-contact measuring principle enables a setup also
without medium.
Advantages
- Non-contact measurement
- Reliable level measurement independent of product properties
- Automatic sound running time correction through integrated temperature sensor
Function
Short ultrasonic pulses of approx. 50 kHz are emitted by the
transducer in the direction of the measured product, reflected
by the product surface and received back by the transducer.
Ultrasonic pulses travel at the speed of sound. The time from
emission to reception of the signals is proportional to the level
in the vessel. The adjustment of the sensors is carried out via
the indicating and adjustment module PLICSCOM.
Electrical connection
4…20mA
-
+
1
Display
2
1
1
6
www.vega-line.co.uk
Voltage supply and signal output
Phone 01444 238846
Dimensions
Technical data
~ 69 mm
195 mm
ø 81 mm
19,5 mm
M20 x 1,5
SW 60
63 mm
G2
Process pressure
-0.2 … 2 bar
Process temperature
-40 … +80 °C
Measuring range
in liquids: 0.4 … 8 m
in bulk solids: 0.4 … 3.5 m
Dead band
400 mm
Accuracy
better than 0.2 % or ±10 mm
Output signal
4 … 20 mA
Operating voltage
non-Ex instrument: 14 … 36 V DC
Ex instrument: 14 … 30 V DC
Fault signal
20.5 mA, 22 mA, < 3.6 mA (adjustable)
Material, housing
plastic PBT (Polyester)
Protection
IP 66/IP 67
Material, wetted parts
PVDF, EPDM
Approval
option: ATEX II 1G, 1/2G, 2G EEx ia IIC T6
You can find further information on our home page under
www.vega-line.de.
ø 50 mm
ø 74 mm
Net price per piece in GBP
656,00
Approval
XX
without
EE
ATEX II 1G, 1/2G, 2G EEx ia IIC T6
–
184,00
Indicating/adjustment module (PLICSCOM)
X
without
A
mounted
–
111,00
SONS62.E
Order number
Accessories
Mounting bracket 200 x 250 mm / 304
2.33438
79,00
Counter nut G2 / PP
2.21638
10,00
PLICSCOM
Pluggable indicating and adjustment module with menu-driven
PLICSCOM.XB
adjustment, user-friendly clear text display and large, easily readable
digits
Phone 01444 238846
Price
in GBP
111,00
www.vega-line.co.uk
7
VEGAWELL S 51
Suspension pressure transmitter for level
measurement of liquids
Application area
The VEGAWELL S 51 is suitable for continuous level measurement of liquids, particularly for gauge measurement in water
basins, waste water shafts, deep wells and applications on
ships.
Due to its versatile and simple mounting options, the VEGAWELL S 51 is an economical solution.
Advantages
- High reliability through maximum overload and vacuum
resistance of the ceramic measuring cell
- High plant availability through integrated overvoltage protection
- Versatile use through robust housing and cable versions
Function
The dry, ceramic measuring cell CERTEC® is the heart of
VEGAWELL S 51. The hydrostatic pressure of the liquid
column causes a capacitance change in the measuring cell
via the ceramic diaphragm. This change is converted into a
standardised 4 … 20 mA signal.
Electrical connection
1
2
3
4
1
Breather capillaries with filter element
2 brown (+): Voltage supply and signal output
3 blue (-): Voltage supply and signal output
4 Screen
8
www.vega-line.co.uk
Phone 01444 238846
Dimensions
Technical data
48 mm
175 mm
52 mm
22 mm
Ambient temperature
-40 … +60 °C
Product temperature
-20 … +60 °C
Average temperature coefficient of
the zero signal
< 0.15 %/10 K
Longterm drift of the zero signal
< 0.1 %/2 years
Deviation in characteristic
0.2 %
Output signal
4 … 20 mA
Operating voltage
9.6 … 36 V DC
Nominal leak current (8/20 µs)
5 kA
Protection transmitter
IP 68
Material
ø 8 mm
Transmitter
316L
Diaphragm
sapphire-ceramic®
Measuring cell seal
FKM
L
Suspension cable PE
Configuration
two wires, breather capillaries,
braiding
Wire cross-section
2 x 0.5 mm²
Diameter
approx. 8 mm
230 mm
You can find further information on our home page under
www.vega-line.de.
ø 22 mm
Net price per piece in GBP
383,00
Measuring range / Length PE suspension cable
A
rel. / 0 … 0.1 bar (0 … 10 kPa) / 10 m
–
Version with straining clamp (see
B
rel. / 0 … 0.2 bar (0 … 20 kPa) / 10 m
–
accessory)
C
rel. / 0 … 0.4 bar (0 … 40 kPa) / 10 m
–
D
rel. / 0 … 1.0 bar (0 … 100 kPa) / 27 m
65,00
E
rel. / 0 … 2.5 bar (0 … 250 kPa) / 27 m
65,00
WELLS51.E
Order number
Accessories
Phone 01444 238846
Price
in GBP
Closing screw G1 PN 3 / 316L
WLVSCHR.GC
44,00
Closing screw G1½ PN 3 / 316L
WLVSCHR.GA
44,00
Straining clamp / 304
2.27363
48,00
VEGABOX 02 (breather housing)
BOX02.XXAXX
48,00
www.vega-line.co.uk
9
VEGASWING S 51
Vibrating level switch for liquids
Application area
The VEGASWING S 51 is a universal liquid level switch with
smallest dimensions. Independent of the mounting position
it detects reliably and with millimetre precision the limit level.
The instrument can be used as full or empty detector, as
approved overfill, dry run or pump protection in vessels or
pipelines.
The VEGASWING S 51 is an economical solution with maximum reliability and safety.
Advantages
- Minimum time and cost expenditure through simple setup
without medium
- Precise and reliable function through product-independent
switching point
- Low maintenance costs
Electrical connection
View to the connection (instrument side)
Max.
Function
The rugged stainless steel tuning fork is piezoelectrically
energised and vibrates at its resonance frequency. The
vibrating frequency changes if the tuning fork is covered by
the liquid. The change is reliably detected by the integrated
electronics module and converted into a switching signal. The
switching condition is visible from outside via a two-colour
LED. No special adjustments are required to set up
VEGASWING S 51.
Min.
1
3
2
1
RL
RL
PA
L-
2
3
L+
PA
L-
L+
Version:
Electronics "T" (transistor) and
Electrical connection / Protection "V"
1
3
2
1
2
3
RL
PE
L1+
RL
N-
PE
L1+
N-
Version:
Electronics "C" (contactless electronic switch) and
Electrical connection / Protection "V"
RL
RL
-
+
-
+
Version:
Electronics "T" (transistor) and
Electrical connection / Protection "M"
10
www.vega-line.co.uk
Phone 01444 238846
Technical data
20 mm
Dimensions
ø 31,7 mm
112 mm
SW 32
19 mm
66 mm
40 mm
G¾ A
Process pressure
-1 … 64 bar
Process temperature
-40 … +100 °C / -40 … +150 °C
Density
≥ 0.7 g/cm³
Viscosity
0.1 … 10000 mPa s
Material, wetted parts
316L
Material, housing
316L, plastic PEI
Switching delay
on: 0.5 s / off: 0.5 s
Approval
overfill protection according to WHG
13 mm
Electronics transistor PNP (plug M12 x 1, plug DIN 43650)
ø 21,3 mm
Version:
Electrical connection / Protection "M"
36 mm
Load current
max. 250 mA
Turn-on voltage
max. 55 V DC
Operating voltage
10 … 55 V DC
Power consumption
max. 0.5 W
45 mm
Electronics contactless electronic switch (plug DIN 43650)
ø 31,7 mm
116 mm
SW 32
13 mm
20 … 253 V AC, 50/60 Hz, 20 … 253 V DC
Domestic current requirement
approx. 3 mA (via the load circuit)
Load current
min. 10 mA, max. 250 mA
You can find further information on our home page under
www.vega-line.de.
20 mm
69 mm
40 mm
G1 A
Operating voltage
ø 21,3 mm
Version:
Net price per piece in GBP
Electrical connection / Protection "V"
137,00
Process fitting / Process temperature
1
Thread G¾ PN 64 / -40 … +100 °C
–
2
Thread G1 PN 64 / -40 … +100 °C
–
5
Thread G¾ PN 64 / -40 … +150 °C
13,00
6
Thread G1 PN 64 / -40 … +150 °C
13,00
Electronics
C
Contactless electronic switch 20 … 253 V AC/DC
–
T
Transistor PNP 10 … 55 V DC
–
Electrical connection / Protection
M
M12 x 1 / IP 66/IP 67 1)
–
V
according to DIN 43650 incl. plug / IP 65
–
SWINGS51.EEA
1)
Only in conjunction with electronics „T“
Order number
Accessories
Phone 01444 238846
Price
in GBP
Welded socket G¾
ESTSG.1GBX1
80,00
Welded socket G1
ESTSG.1GAX1
80,00
M12 connection cable 4-pole length 5 m
ASL.2GA
15,00
Test magnet
2.28079
4,00
www.vega-line.co.uk
11
VEGASWING S 52
Vibrating level switch for liquids in the food
and pharmaceutical industries
Application area
The VEGASWING S 52 is a universal level switch with
smallest dimensions for liquids with hygienic requirements.
Independent of the mounting position, it detects reliably and
with millimetre precision the limit level. The instrument can be
used as full or empty alarm, as approved overfill, dry run or
pump protection in vessels and pipelines.
The VEGASWING S 52 is an economical solution with maximum reliability and safety.
Advantages
- Minimum time and cost expenditure through simple setup
without medium
- Precise and reliable function through product-independent
switching point
- Low costs for maintenance
- Perfectly suitable for CIP and SIP cleaning
Electrical connection
View to the connection (instrument side)
Max.
Function
The rugged stainless steel tuning fork is piezoelectrically
energised and vibrates at its resonance frequency. The
vibrating frequency changes if the tuning fork is covered by
the liquid. The change is reliably detected by the integrated
electronics module and converted into a switching signal. The
switching condition is visible from outside via a two-colour
LED. No special adjustments are required to set up
VEGASWING S 52.
Min.
1
3
2
1
L-
2
RL
RL
PA
3
L+
PA
L-
L+
Version:
Electronics "T" (transistor) and
Electrical connection / Protection "V"
1
3
2
1
3
2
RL
PE
L1+
RL
N-
PE
L1+
N-
Version:
Electronics "C" (contactless electronics switch) and
Electrical connection / Protection "V"
RL
RL
-
+
-
+
Version:
Electronics "T" (transistor) and
Electrical connection / Protection "M"
12
www.vega-line.co.uk
Phone 01444 238846
Technical data
20 mm
Dimensions
ø 31,7 mm
143 mm
SW 32
19 mm
66 mm
40 mm
G¾ A
Process pressure
-1 … 64 bar
Process temperature
-40 … +150 °C
Density
≥ 0.7 g/cm³
Viscosity
0.1 … 10000 mPa s
Material, wetted parts
316L (Ra < 0.8 µm)
Material, housing
316L, plastic PEI
Switching delay
on: 0.5 s / off: 0.5 s
Approval
overfill protection according to WHG
Electronics transistor PNP (plug M12 x 1, plug DIN 43650)
max. 250 mA
Turn-on voltage
max. 55 V DC
Operating voltage
10 … 55 V DC
Process fitting "1"
Power consumption
max. 0.5 W
Electrical connection / Protection "M"
Electronics contactless electronic switch (plug DIN 43650)
13 mm
Load current
ø 21,3 mm
Version:
47 mm
36 mm
Operating voltage
20 … 253 V AC, 50/60 Hz, 20 … 253 V DC
Domestic current requirement
approx. 3 mA (via the load circuit)
Load current
min. 10 mA, max. 250 mA
You can find further information on our home page under
www.vega-line.de.
143 mm
ø 31,7 mm
13 mm
53 mm
40 mm
Net price per piece in GBP
214,00
Process fitting
ø 21,3 mm
1
Thread G¾ PN 64
–
2
Thread G1 PN 64
–
7
Clamp 1" PN 16
35,00
Version:
8
Clamp 2" PN 16
35,00
Process fitting "7"
9
Bolting DN 40 PN 40 DIN 11851
35,00
Electrical connection / Protection "V"
Electronics
C
Contactless electronic switch 20 … 253 V AC/DC
–
T
Transistor PNP 10 … 55 V DC
–
Electrical connection / Protection
M
M12 x 1 / IP 66/IP 67 1)
–
V
according to DIN 43650 incl. plug / IP 65
–
SWINGS52.EEA
1)
Only in conjunction with Electronics „T“
Order number
Accessory
Phone 01444 238846
Price
in GBP
Welded socket G¾
ESTSG.1GBX1
Welded socket G1
ESTSG.1GAX1
80,00
Welded socket Clamp 1" incl. seal and tension ring
ESTC.A3SX
130,00
80,00
Welded socket Clamp 2" incl. seal and tension ring
ESTC.C3SX
132,00
Welded socket bolting DN 40 DIN 11851
ESTR.FAXX
77,00
M12 connection cable 4-pole length 5 m
ASL.2GA
15,00
Test magnet
2.28079
4,00
www.vega-line.co.uk
13
VEGAVIB S 61
Vibrating level switch for granulates
Application area
The VEGAVIB S 61 is a level switch for granules and coarse
grained bulk solids. The VEGAVIB S 61 detects reliably and
precisely the min. or max. limit level. The smooth surface of
the vibrating rod, without corners and edges avoids jamming
of the bulk solid and ensures optimum cleaning.
Advantages
- Minimum time and cost expenditure through simple setup
without medium
- Reliable function through product-independent switching
point
- Low maintenance costs
Electrical connection
345678
Function
The vibrating rod of VEGAVIB is energized via piezoceramic
elements. If the vibrating rod is covered by the product, the
amplitude is damped. The amplitude change is processed by
the integrated electronics module and converted into a
switching command. The switching condition is visible from
outside via a two-colour LED.
No special adjustments are required to set up VEGAVIB S 61.
L
N
1
2
min
3
1
4
5
max
6
2
7
8
3
Version: Electronics "R" - Relay (DPDT)
1
Voltage supply
2
Relay 1
3
Relay 2
1 2 3 4
min
1
2
3
max
4
1
Version: Electronics "T" - Transistor (NPN/PNP)
1
Voltage supply
+
-
+
-
+
-
+
-
Assignment:NPN PNP
14
www.vega-line.co.uk
Phone 01444 238846
Dimensions
Technical data
~ 69 mm
145 mm
ø 81 mm
M20 x 1,5
Process pressure
-1 … 16 bar
Process temperature
-50 … +150 °C
Density
≥ 100 g/l
Material, wetted parts
316L
Material, housing
plastic PBT
Protection
IP 66/IP 67
Approval
option: ATEX II 1/3 D IP6X T
20 mm
Electronics transistor (NPN/PNP)
SW 41
105 mm
ø 29 mm
148 mm
G1 A
Load current
max. 400 mA
Turn-on voltage
max. 55 V DC
Operating voltage
10 … 55 V DC
Power consumption
max. 0.5 W
Electronics relay (DPDT)
ø16 mm
Version:
Sensor length "A"
Operating voltage
20 … 253 V AC, 50/60 Hz, 20 … 72 V DC
Power consumption
1 … 8 VA (AC), approx. 1.3 W (DC)
Turn-on voltage
min. 10 mV / max. 253 V AC/DC
Switching current
min. 10 µA / max. 3 A AC, 1 A DC
Breaking capacity
max. 750 VA, 54 W
~ 69 mm
You can find further information on our home page under
www.vega-line.de.
153 mm
ø 81 mm
M20 x 1,5
Net price per piece in GBP
22 mm
SW 46
328,00
Approval
XX
EJ
G1½ A
without
–
ATEX II 1/3 D IP6X T
71,00
Process fitting
ø 29 mm
1
Thread G1 PN 16
2
Thread G1½ PN 16
–
23,00
L
Electronics
R
Relay (DPDT) 20 … 72 V DC/20 … 253 V AC (5 A)
–
T
Transistor (NPN/PNP) 10 … 55 V DC
–
105 mm
Sensor length L
ø16 mm
A
148 mm
C
500 mm
–
85,00
D
1000 mm
168,00
E
1500 mm
252,00
Version:
Sensor length "C", "D", "E"
VIBS61.E
Order number
Accessory
Phone 01444 238846
Price
in GBP
Welding sleeve G1
2.10818
34,00
Welding sleeve G1½
2.21993
41,00
Lock fitting G1½ (unpressurized)
ARV-VB63.1GD
79,00
Lock fitting G1½ (-1 … 16 bar)
ARV-VB63.2GD
167,00
www.vega-line.co.uk
15
VEGAWAVE S 61
Vibrating level switch for powders
Application area
The VEGAWAVE S 61 is a universal level switch for powders
and fine-grained bulk solids. The VEGAWAVE S 61 detects
reliably and precisely the min. and max. limit level. The tuning
fork is ideal for the use in adhesive and abrasive products but
also in bulk solids with very low denisty.
Advantages
- Minimum time and cost expenditure through simple setup
without medium
- Reliable function through product-independent switching
point
- Low maintenance costs thanks to robust design
Function
The tuning fork of VEGAWAVE is energised via piezoceramic
elements. If the tuning fork is covered by the medium, the
amplitude is damped. The amplitude change is processed
by the integrated electronics module and converted into a
switching command. The switching condition is visible from
outside via a two-colour LED.
No special adjustments are required to set up VEGAWAVE
S 61.
Electrical connection
345678
L
N
1
2
min
3
1
4
5
max
6
2
7
8
3
Version: Electronics "R" - Relay (DPDT)
1
Voltage supply
2
Relay 1
3
Relay 2
1 2 3 4
min
1
2
3
max
4
1
Version: Electronics "T" - Transistor (NPN/PNP)
1
Voltage supply
+
-
+
-
+
-
+
-
Assignment:NPN PNP
16
www.vega-line.co.uk
Phone 01444 238846
Dimensions
Technical data
~ 69 mm
153 mm
ø 81 mm
SW 46
-1 … 25 bar
Process temperature
-50 … +150 °C
Density
≥ 100 g/l
Material, wetted parts
316L
Material, housing
plastic PBT
Protection
IP 66/IP 67
Approval
option: ATEX II 1/3 D IP6X T
Electronics transistor (NPN/PNP)
22 mm
M20 x 1,5
Process pressure
G1½ A
Load current
max. 400 mA
Turn-on voltage
max. 55 V DC
Operating voltage
10 … 55 V DC
Power consumption
max. 0.5 W
L
Electronics relay (DPDT)
95 mm
ø 43 mm
Operating voltage
20 … 253 V AC, 50/60 Hz, 20 … 72 V DC
Power consumption
1 … 8 VA (AC), approx. 1.3 W (DC)
Turn-on voltage
min. 10 mV / max. 253 V AC/DC
Switching current
min. 10 µA / max. 3 A AC, 1 A DC
Breaking capacity
max. 750 VA, 54 W
You can find further information on our home page under
www.vega-line.de.
Net price per piece in GBP
253,00
Approval
XX
without
EJ
ATEX II 1/3 D IP6X T
–
71,00
Process fitting
2
Thread G1½ PN 25
–
Electronics
R
Relay (DPDT) 20 … 72 V DC/20 … 253 V AC (5 A)
–
T
Transistor (NPN/PNP) 10 … 55 V DC
–
Sensor length L
A
165 mm
C
500 mm
–
85,00
D
1000 mm
168,00
E
1500 mm
252,00
WAVES61.E
Order number
Accessories
Phone 01444 238846
Price
in GBP
Welding sleeve G1½
2.21993
41,00
Lock fitting G2 (unpressurized)
ARV-WE63.1GA
95,00
Lock fitting G2 (-1 … 16 bar)
ARV-WE63.2GA
190,00
www.vega-line.co.uk
17
VEGABAR S 14
Process pressure transmitter with CERTEC®
measuring cell
Application area
The VEGABAR S 14 is a universal pressure transmitter for the
measurement of gases, vapours and liquids. The small pressure transmitter offers maximum reliability and safety.
The VEGABAR S 14 is an economical solution for a number of
applications in all industries.
Advantages
- High plant availability through maximum overload and
vacuum resistance of the ceramic measuring cell
- Price-favourable version with smallest mounting dimensions
- Low maintenance costs thanks to wear-free ceramic measuring cell
Function
The dry, ceramic measuring cell CERTEC® is implemented in
VEGABAR S 14. The process pressure causes a capacitance
change in the measuring cell via the ceramic diaphragm. This
change is converted into a standardised 4 … 20 mA signal.
Electrical connection
View to connection (instrument side)
1
3
+
Version:
Electrical connection "V"
Version:
Electrical connection "M"
-
18
www.vega-line.co.uk
2
-
+
Phone 01444 238846
Technical data
28 mm
Dimensions
103 mm
ø 38 mm
SW 27
25 mm
G½ A
Version:
Ambient temperature
-20 … +85 °C
Product temperature
-20 … +100 °C
Average temperature coefficient of
the zero signal
< 0.15 %/10 K
Longterm drift of the zero signal
< 0.1 %/2 years
Deviation in characteristic
< 0.5 %
Output signal
4 … 20 mA
Operating voltage
10 … 30 V DC
Material, housing
brass nickle-plated / plastic PA
Protection
IP 65
Material, wetted parts
Electrical connection "M"
50 mm
36 mm
Process fitting
316L
Diaphragm
sapphire-ceramic®
Process seal
FKM (Viton)
You can find further information on our home page under
www.vega-line.de.
99 mm
SW 27
17 mm
ø 38 mm
Net price per piece in GBP
20 mm
G½ A
153,00
Process fitting
G¼ A
Version:
1
G½, manometer connection EN 837 PN 60
–
2
G½, inside G¼, PN 60
–
Pressure / Measuring range
Electrical connection "V"
A
rel. / 0 ... 0.1 bar (0 ... 10 kPa)
–
B
rel. / 0 ... 0.25 bar (0 ... 25 kPa)
–
C
rel. / 0 ... 0.4 bar (0 ... 40 kPa)
–
D
rel. / 0 ... 0.6 bar (0 ... 60 kPa)
–
E
rel. / 0 ... 1.0 bar (0 ... 100 kPa)
–
F
rel. / 0 ... 1.6 bar (0 ... 160 kPa)
–
G
rel. / 0 ... 4 bar (0 ... 400 kPa)
–
H
rel. / 0 ... 6 bar (0 ... 600 kPa)
–
K
rel. / 0 ... 10 bar (0 ... 1000 kPa)
–
L
rel. / 0 ... 16 bar (0 ... 1600 kPa)
–
M
rel. / 0 ... 25 bar (0 ... 2500 kPa)
–
P
abs. / 0 ... 10 bar (0 ... 1000 kPa)
–
Electrical connection
M
M12 x 1
V
according to DIN 43650 incl. plug
21,00
–
BARS14.E
Order no.
Accessories
Phone 01444 238846
Price
in GBP
Welding sleeve G½
2.7783
15,00
Measuring instrument holder
BARMONT.D
65,00
M12 connection cable 4-pole length 5 m
2.28400
12,00
Siphon U-form / 316
2.40129
108,00
Siphon circular form / 316
2.40130
112,00
www.vega-line.co.uk
19
VEGABAR S 16
Process pressure transmitter for liquids and
gases in the food and pharmaceutical industries
Application area
The pressure transmitter VEGABAR S 16 can be used universally for the measurement of gases, vapours and liquids with
hygienic requirements. The small pressure transmitter offers
maximum reliability and safety. The front-flush mounting
ensures optimum cleaning even with high hygienic requirements.
Advantages
- High plant availability through maximum overload and
vacuum resistance of the ceramic measuring cell
- Price-favourable version with smallest mounting dimensions
- Optimal for CIP and SIP cleaning
Function
The dry, ceramic measuring cell CERTEC® is used for
VEGABAR S 16. The process pressure causes a capacitance
change in the measuring cell via the ceramic diaphragm. This
change is converted into a standardised 4 … 20 mA signal.
Electrical connection
View to the connection (instrument side)
1
3
+
Version:
20
www.vega-line.co.uk
-
Electrical connection "V"
Version:
2
+
Electrical connection "M"
Phone 01444 238846
Technical data
ø38 mm
64 mm
28 mm
Dimensions
ø63 mm
Version:
Process fitting "3"
Electrical connection "M"
-20 … +85 °C
Product temperature
-20 … +100 °C
Average temperature coefficient of
the zero signal
< 0.15 %/10 K
Longterm drift of the zero signal
< 0.1 %/1 years
Deviation in characteristic
< 0.5 %
Output signal
4 … 20 mA
Operating voltage
10 … 30 V DC
Material, housing
316L / plastic PA
Protection
IP 65
Material, wetted parts
50 mm
36 mm
Process fitting
316L
Diaphragm
sapphire-ceramic®
Process seal
EPDM
You can find further information on our home page under
www.vega-line.de.
64 mm
ø48 mm
Ambient temperature
Version:
Process fitting "2"
Net price per piece in GBP
Electrical connection "V"
320,00
Process fitting
1
Clamp 1" PN 16
–
2
Clamp 2" PN 16
–
3
Bolting DN 25 PN 40 DIN 11851
–
4
Bolting DN 40 PN 40 DIN 11851
–
Pressure / Measuring range
A
rel. / 0 ... 0.1 bar (0 ... 10 kPa)
–
B
rel. / 0 ... 0.25 bar (0 ... 25 kPa)
–
C
rel. / 0 ... 0.4 bar (0 ... 40 kPa)
–
D
rel. / 0 ... 0.6 bar (0 ... 60 kPa)
–
E
rel. / 0 ... 1.0 bar (0 ... 100 kPa)
–
F
rel. / 0 ... 1.6 bar (0 ... 160 kPa)
–
G
rel. / 0 ... 4 bar (0 ... 400 kPa)
–
H
rel. / 0 ... 6 bar (0 ... 600 kPa)
–
K
rel. / 0 ... 10 bar (0 ... 1000 kPa)
–
L
rel. / 0 ... 16 bar (0 ... 1600 kPa)
–
N
abs. / 0 ... 2.5 bar (0 ... 250 kPa)
–
P
abs. / 0 ... 10 bar (0 ... 1000 kPa)
–
Electrical connection
M
M12 x 1
V
according to DIN 43650 incl. plug
21,00
–
BARS16.E
Order number
Accessories
Phone 01444 238846
Price
in GBP
Welded socket Clamp 1" incl. seal and tension ring
ESTC.A3SX
130,00
Welded socket Clamp 2" incl. seal and tension ring
ESTC.C3SX
132,00
Welded socket bolting DN 25
ESTR.DAXX
77,00
Welded socket bolting DN 40
ESTR.FAXX
77,00
M12 connection cable 4-pole length 5 m
2.28400
12,00
www.vega-line.co.uk
21
VEGAMET 381
Signal conditioning and indicating instrument for level sensors
Application area
The VEGAMET 381 signal conditioning instrument powers the
connected 4 … 20 mA/HART sensor, processes and displays
the measured values. The VEGAMET 381 is ideal for simple
control tasks in all industries. Comprehensive adjustment
functions allow individual adaptations to the respective application.
Advantages
Electrical connection
- Integrated transmitter power supply
- Versatile use through two relay outputs for control of
pumps, stirrers, etc.
- Clear LC display for digital and quasi-analogue measured
value indication
1
+ -
2
1 2
+ 3 4
1
2
Function
on
The VEGAMET 381 signal conditioning instrument powers
an individual 4 … 20 mA sensor and processes its measured
value. Through an adjustment on VEGAMET this measured
value can be scaled by any factor and transferred to connected downstream devices via the current output. Apart from
the large display, two operating relays are available as level
detectors for control tasks.
%
18 17 16 15 14 13 12 11 10 9 8 7 6 5
3
4
5
N- L+
6
Assignment of the non-Ex version
1
+ -
2
1 2
+ 3 4
1
2
on
%
18 17 16 15 14 13 12 11 10 9 8 7 6 5
3
4
5
N- L+
6
Assignment of the Ex version
1 Sensor input
2 Current output
3 Fail safe relay
4 Relay 2
5 Relay 1
6 Voltage supply
22
www.vega-line.co.uk
Phone 01444 238846
Dimensions
Technical data
Series
Instrument for front panel or wall mounting or
on carrier rail 35 x 7.5 according to EN 50022
Terminals
screw terminals,
max. wire cross-sectio 1.5 mm²
Protection
wall/carrier rail mounting: IP 20
front panel mounting: IP 40
Operating voltage
20 … 250 V AC, 50/60 Hz, 20 … 250 V DC
Power consumption
7 VA (AC), 4 W (DC)
Ambient temperature
-20 … +60 °C
Indicating and adjustment elements
1 function switch, 16-steps
2 selection keys
control lamps, switching status operating
relay
control lamp, fail safe relay
control lamp, operation
Approvals
options:
- ATEX II(1)G [Ex ia] IIC, II(1)D [Ex iaD]
- IEC (Zone 0) [Ex ia] IIC, (Zone 20) [Ex iaD]
Front view
1
2
3
%
381
96 mm
92 mm
102 mm
10 mm
Side view
72 mm
19 mm
Version:
18 mm
Approval "XX"
Sensor circuit
Sensor input
number of sensors 1 x 4 … 20 mA
Type of input (switch over)
mode active: sensor is powered by
VEGAMET 381
mode passive: sensor has its own power
supply
Outputs
Current output, range
0/4 … 20 mA
Current output, max. load
500 Ohm
Relay output
2 operating relays, 1 fail safe relay
Relay, breaking capacity
max. 500 VA, 50 W DC
Relay, turn-on voltage
min. 10 mV DC, max. 250 V AC/DC
Relays, switching current
min. 10 µA DC, max. 3 A AC, 1 A DC
You can find further information on our home page under
www.vega-line.de.
Version:
Approval "CX", "CA"
Net price per piece in GBP
310,00
Approval
XX
without
CX
ATEX II(1)G [Ex ia] IIC, II(1)D [Ex iaD]
–
92,00
MET381.
Order number
Accessories
Surface housing IP 65
Phone 01444 238846
Price
in GBP
ISO-GEH.BXX
57,00
www.vega-line.co.uk
23
VEGATRENN 149A Ex
Ex separator for 4 … 20 mA/HART sensors
Application area
The VEGATRENN 149A Ex is used for galvanic separation,
intrinsically safe power supply as well as signal transmission
of Ex approved 4 … 20 mA/HART sensors in hazardous areas. The separate voltage supply ensures a reliable measured
value transmission. The VEGATRENN 149A Ex is used in all
industries with Ex applications.
Advantages
- Universal Ex separator for all 4 … 20 mA/HART sensors
- Complete HART transparency ensures access to sensor
settings
- Simple installation through carrier rail mounting
Function
The Ex separator is used for intrinsically safe powering of Ex
approved 4 … 20 mA/HART sensors. The instrument creates
a galvanic separation between sensor circuit and processing
circuit. Hence the Ex and non-Ex areas are separated reliably.
VEGATRENN 149A Ex can also be used as a power supply
for 4 … 20 mA sensors in non-Ex areas.
Electrical connection
1
on
4
CONNECT
2
3
149AEx
1 Sensor circuit
2 Processing circuit
3 Voltage supply
4 HART communication sockets
24
www.vega-line.co.uk
Phone 01444 238846
Dimensions
Technical data
Series
mounting on carrier rail 35 x 7.5
according to EN 50022
Terminals
coded, pluggable screw terminals,
max. wire-cross section 2.5 mm²
Protection
IP 20
Operating voltage
20 … 253 V AC, 50/60 Hz, 20 … 253 V DC
Power consumption
max. 2.4 W
Ambient temperature
-20 … +50 °C
Approvals
- ATEX II (1) G D [Ex ia] IIC
- IEC [Ex ia] IIC;
- FM(IS)Cl.I-III,DIV 1; GP A-D;
(NI)Cl.I-III,DIV2;GP A-D
Front view
95 mm
on
108 mm
22,5 mm
CONNECT
149AEx
Sensor circuit
Side view
109 mm
Operating voltage
16.7 V ±0.2 V (at 20 mA)
Open-circuit voltage
26 V ±5 %
Short circuit current
≤ 32 mA
Internal resistance
328 Ohm
Processing circuit
Number
1
Open-circuit voltage
24 V, ±10 %
Galvanic separation
to all other circuits
Max. load (load resistor)
without communication resistor
0 … 700 Ohm
with communication resistor
0 … 450 Ohm
You can find further information on our home page under
www.vega-line.de.
Net price per piece in GBP
158,00
Approval
X
ATEX II (1) G D [Ex ia] IIC
–
TRENN149AEX.
Phone 01444 238846
www.vega-line.co.uk
25
This is how
vega-line functions
Advice
Do you have questions about the vega-line products you
need? Just give us a call. You can reach our experienced
experts by dialing 01444 238856.
Order confirmation
Due to the speed of delivery, the invoice is also your
order confirmation.
Prices
Warranty
vega-line prices are net prices in GBP per item plus
The warranty period for vega-line products is 2 years. If
packaging, shipping and VAT 20% from 01.01.2012. If
an instrument fails due to any manufacturing defect wit-
you order 4 instruments of the same type, you will get
hin this period, you will get a replacement free of charge.
a 10% discount, from 10 instruments of the same type
a 15% discount applies. This discount does not apply
Specification & pricing
to accessory parts. The cost of packaging and shipping
All prices are currently valid for UK from August 1st,
is £ 15.00 per consignment to UK mainland only. Any
framework or purchasing agreements made with VEGA
do not apply to vega-line product prices.
Shipment
2011 to September 30th, 2012. However the description
and price of the goods you order will be as shown on
the vega-line website at the time you place your order.
Furthermore, the sales, shipping and payment terms of
VEGA Controls Ltd apply. We reserve the right to make
All orders will be despatched next working day (ex-
commercial and
cluding public holidays). This refers to orders of any 4
technical modifications and changes to the product line
instruments of the same type. Higher quantities may
at any time without notice. E&OE. For full terms and
require longer delivery. If this applies, we will advise you
conditions, please see the website.
by return.
26
www.vega-line.co.uk
Phone 01444 238846
Fax order to 01444 870080
Company
Contact:
vega-line direct selection
Department:
VEGA Controls Ltd.
Street:
Kendal House
Town:
Victoria Way
Burgess Hill
County/City:
West Sussex
Postcode:
RH15 9NF
Phone:
Fax:
E-mail:
Instrument name
Order code
Quantity
Unit price
Packaging and shipment
15.00 GBP
If the shipping address differs from the billing address:
My order number:
Company:
My project number:
Contact:
Total price
VAT (17,5%)
GBP
Total
GBP
Payment by VISA. Please call me back.
Department:
Street:
Town:
County/City:
Postcode:
Phone 01444 238846
We herewith place the order according to your sales, shipment
and payment conditions. All prices are plus VAT.
Place/Date:
Signature:
www.vega-line.co.uk
27
We reserve the right to make technical modifications and changes to the product line
at any time without notice.
vega-line
VEGA Controls Ltd.
Kendal House
Victoria Way
Burgess Hill
West Sussex
RH15 9NF
Phone 01444 238856
Fax
01444 870080
E-mail [email protected]
www.vega-line.co.uk
33793-EN-UK-120315
All prices are valid from October 1st, 2011 to September 30th, 2012.