X3
site
11
X3
| aire 3
elements
direct
ground mount
bollard/walkway
LED
HTLO™
horizontal
4”
4”
LED
per foot
LL
LS
1 board in cross
watts/ft
lumens/ft
2
5
120
600
specifications subject to change
~ lumens at 4000k
Available Light Platforms:
LED
2
Available Mounting:
T5
ground mount
w w w.al i ghts .c om
a·light
X3
| aire 3
project
type
quantity
interior
exterior
Series: X3
See page 4 for detailed options
Legend:
1.
Staggered lamping is automatic for T5/T5HO.
2.
T5/T5HO optics.w
3.
Direct burial option reduces above-ground height up to 4” once
backfilled.
optics:
LED
a·cirrus™
shows LED pattern
(A)
HTLO™
vertical + horizontal
(HVH)
HTLO™
horizontal
(H)
LED
Fluorescent
HTLO™ vertical pattern (LED only)
HTLO™ horizontal pattern (LED only)
HTLO™ vertical+horizontal pattern (LED only)
a·cirrus™ + HTLO™ (LED only)
a·cirrus™ lens
HTLO™ horizontal lens
HTLO™
vertical
(HV)
Fluorescent
a·cirrus™
(A)
chamfered base
square base
direct burial
a∙lightanium™
satin black
dark bronze
other - specify RAL#
HTLO™
horizontal
(H)
dimming - 0-10 unless otherwise specified
external fusing
new york city code
site
Height Dimension:
nominal 8’
8x
nominal 9’
9x
nominal 10’
10x
nominal 11’
11x
Cantilever Dimension:
nominal 2’
2
nominal 3’
3
Lamping:
LED low output (1w / ft)
LL
LED standard output (5w / ft)
LS
T5 staggered 1 2
T5HO staggered 1 4
LED Temp (if applicable):
3000k
30
3500k
35
4000k
40
Voltage:
universal 120V - 277V
U
120V
1
277V
2
347V (not available for LED)
3
Lens:
clear glass
G
polycarbonate
P
Optics:
HV
HH
HVH
AH
2
A
2
H
Mounting:
M
S
3
DR
Finish:
T
B
DB
O
Options:
D
F
N
elements
10
93-5/8”
4”
20-3/8”
118”
11
93-5/8”
4”
32-3/8”
130”
ground mount
w w w.al i ghts .c om
Version | March 2014
90” visible
9
93-5/8”
4”
8-3/8”
106”
94” overall
nomenclature
8
illuminated height
81-5/8”
cantilever height
4”
base/plate height
8-3/8”
overall height
94”
Dimensions are approximate.
94” overall
8f t example:
direct burial
up to 4”
3
X3
| aire 3
elements
Mounting:
Ground Mount: Free standing milled mounting plate and stainless steel anchor
platform. Form and frame by others. No grout required. Chamfered or square
base is 7-3/4” x 7-3/4”.
Direct Burial: Free standing square base with concealed mounting plate and
stainless steel anchor platform for a clean, simple aesthetic. Concrete base
must be cast up to 4” lower than grade allowing material to be backfilled over
the concrete and mounting base. Form and frame by others. No grout required.
Top accessible lamp/ballast tray is the length of the housing and slides out
for servicing. Clearance above bollard must be in excess of the actual bollard
height, therefore an 8ft fixture requires an additional 8ft clearance. Integral plug
connects to site wiring and unplugs when tray is removed.
Optics:
Each pattern contains an optical platform engineered for maximum light output.
Precision-formed reflector design and optimal staggered lamp or LED spacing
minimizes socket shadow and maximizes even light output.
Lengths:
All length dimensions are nominal and used for general length identification
purposes. Actual lengths may vary by several inches. Luminaires are individual
fixtures and are not connectable.
Overall height = luminous height + base/plate + cantilever height. Base and
plate together extend approximately 8-1/2” from ground for 8’ and 9’. Lengths
above 9’ will include 12” additional of front plate height per added foot. See
drawing/table. Maximum cut-length for tempered glass is 120.00".Direct burial
option reduces overall height above-ground up to 4”.
LED:
5yr warranty. >60,000hr LED life. Tested to LM-79 and LM-80. See wattage/
lumen table for specifications per foot. All specifications are subject to change.
Built with high-performance Nichia® LED’s. Heat sync designed to ensure
proper performance. LED boards are replaceable, built in foot-long increments.
Board position/quantity to be determined by factory.
Driver:
Constant Current LED Systems:
Inherent dimming
Power Factor > 90%
90°C case rating
Inherent short-circuit protection
<20% total harmonic distortion
Extreme low-temperature performance to -40°C
Sound rating A
UL/CSA Listed Class 2 rating
IP66 rated
Universal 120-277V
Output:
LS_ _: LED standard output
600 lm/ft
5 watts/ft
LH_ _: LED high output
1200 lm/ft
10 watts/ft
Color Temp:
85CRI is standard; 90+ is available upon request. Insert a 2-digit number for color temp after the LED nomenclature.
30 = 3000 K
35 = 3500 K
40 = 4000 K
Consult factory for special order color temperatures.
LED Optics:
WISP™ lens is the factory standard recommendation for use with LED. Available options are dependent upon a particular luminaire.
Review “Legend” section of the specification sheet to determine any
restrictions in using various optics. Consult factory prior to specification.
T5/T5HO:
Single, dual or single staggered lamps in cross section. Program start is factory
standard.
Construction:
60% recycled aluminum extruded housing, 1/4” thick. Precision-milled 3/8”
endcaps. Impact-resistant, 1/4” tempered glass or polycarbonate outer lens.
Neoprene gasketed. Free standing milled mounting plate and stainless steel
anchor platform.
Finish:
Electrostatically applied powder coat finish.
Listing:
UL/CUL. Wet Location.
Companion Luminaires:
X1 bollard, X2 bollard, X4 wall, X7 bollard
4
w w w.al i ghts .c om
a·light