PRODUCT INFORMATION SHEET
23% SODIUM CHLORIDE BRINE
23% Sodium Chloride Brine
An effective de-icing solution for
roadways and parking lots that
also improves the melting power
of dry salt and sand.
Inexpensive and effective, 23% Sodium Chloride Brine is an
economical de-icing product for highway and road departments.
BENEFITS
• Cost-effective
• Available in bulk and tote formats
• Weakens the bond between the paved road surface and snow/ice
and allows for easier road clearing when used in Direct Liquid Applications
• Effective as a pre-wetting agent to increase the melting power
of applied dry material
• Reduces bounce and scatter
APPLICATION
A 23% Sodium Chloride Brine mixture is ideally suited for most roadways and
parking lots that experience milder winter temperatures.
Application Rates:60 - 100 Litres per Lane/Km for Direct Liquid Application
20 – 40 Litres per Tonne for Prewetting Sand and/or Salt
The above application rates are intended as guidelines and exact application
rates will vary depending on local conditions at time of use as well as forecasted
conditions after use.
Available from:
Da-Lee Dust Control
350 Jones Road
Stoney Creek, ON
T. 905-643-1135 or 1-800-268-4490
F. 905-643-2299
www.daleedustcontrol.com
TYPICAL PROPERTIES
SODIUM CHLORIDE BRINE
Colour
Clear
Freezing Point
-21 degrees C (-6 F)
23% Sodium Chloride Brine
Composition
Sodium Chloride (NaCl)
23%
Water (H2O)
77%
Appearance
Clear Liquid
Dry Solids
23.3%
Specific Gravity’s Range
1.18 +/- .02
pH Range
7-9
Water Miscibility
Complete
PRODUCT INFORMATION
23% Sodium Chloride Brine is a naturally occurring, clear material produced from
rock salt formations.
Available from:
Da-Lee Dust Control
350 Jones Road
Stoney Creek, ON
T. 905-643-1135 or 1-800-268-4490
F. 905-643-2299
www.daleedustcontrol.com