Harriet
40” Dining Table
style # SS - 355 - 4T
dpci # 009 - 00 - 2119
>> assembly instruction
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck-though we’re confident you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 855-698-4846 to order missing supplies.
2. Use the carton as a working surface to prevent damage during assembly.
3. Gather all tools prior to assembly.
Care and maintenance
Wash with mild soap, rinse with water, and let air dry.
Warranty
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your patio furniture provided your
furniture is maintained with care and used only for personal, residential purposes.
Frames are warranted to be free from defects in material or workmanship for a period of one (1) year for steel frame.
Cushion, Straps and/or Wicker Weaves are covered for a period of one (1) year against defects in material or workmanship. Sling fabric is covered for
a period of one (1) year against defects in material or workmanship.
Exclusions: Items used for commercial, contract or other non-residential purposes; display models; items purchased “as is;” or items damaged due to
acts of nature, vandalism, misuse or improper assembly are not covered. Discoloration or fading of the finish or fabrics as a result of exposure to
the elements, chemicals or spills is not covered. Tabletop breakage, corrosion or rusting of hardware and damages to frames or welds caused by
improper assembly, misuse or natural causes are not covered.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color or a similar style
and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above
exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
2
table of contents
introduction
2
hardware
4
parts list
5
assembly
Questions? Please call 855-MYTGTHOME (855-698-4846) for parts and service.
6-9
For faster service, have the style number and DPCI number ready when calling.
3
hardware
(H1) x 12+1 spare
(H2) x 12
(H3) x 1
(H4) x 5 spares
M6 x 15L bolt
M6 Metal washer
plastic umbrella insert piece
Thicker mm tile bumper
(H5) x 5 spares
(H6) x 1
Allen wrench
Thinner tile bumper
4
ITEM DESCRIPTION QUANTITY
A
table rim
1
B
metal leg
4
C
metal center ring
1
D
tile
8 + 1 spare
E
tile center piece
1 + 1 spare
D
E
A
B
C
5
step 1.
(H1) x 8
(H2) x 8
M6 x 15L bolt
M6 Metal washer
B
A
1. Do not tighten completely.
6
step 2.
(H1) x 4
(H2) x 4
M6 x 15L bolt
M6 Metal washer
C
1. Once all bolts are in place, begin tightening bolts. Alternate from one side to the other, until all are tightened.
7
step 3.
D
1. Place the tiles onto the tabletop rim.
8
E
step 4.
H5
1. Use tile bumper to keep tile flat if it needs.
9
CARING FOR YOUR OUTDOOR FURNITURE
Please keep this page for your records.
CARING FOR STEEL FURNITURE
Though its power-coated finish is rust-resistant,steel is prone to rust over time with exposure to
the elements.In case of rust of scratches,lightly sand the affected area and apply touch-up paint.
To maintain the finish,periodically apply wax with a soft colth.
CARING FOR A CERAMIC TILE TABLETOP
Tabletop ceramic tiles must be stored during fall and winter months in a dry location where
temperatures will not fall below 32°F(0°C).
2014 Target. The Bullseye Design is a trademark of Target Brands. Inc. All rights reserved.