lindab | we simplify construction
Lindab building solutions
for gymnasiums and sports halls
Functional and technical guide for builders, investors, designers
www.lindab.hu/csarnok
Lindab building solutions for gymnasiums and sport halls
The Sweden-based Lindab Group operates in the field of developing, manufacturing and selling of products and
system solutions in steel for simplified construction. Since its foundation in 1959, Lindab has become continuously
developing, determinant market player with enormous experience. The Hungarian daughter company, Lindab
Kft. has been present in Hungary already for 20 years, operating by its own significant production capacity and
excellent results. In this market segment, Lindab has got the widest and most complex product range (roofand wall cladding products and systems, supporter elements, complete building structures and supplementary
systems: rainwater system, roof safety systems, etc.) representing optimum solutions for residential buildings or
industrial halls, new projects or renovations as well.
FUNCTION
TECHNICAL POSSIBILITIES
Halls for sports activities and gymnasiums
Lindab lightweight construction solutions
Buildings or objects are always realized to serve some purpose or to
satisfy certain functions. Therefore it is worth to sum up, in general,
the most important factors that influence the final design of a building
(without a claim for completeness):
builders’ needs: function, aesthetics, expected lifetime,
construction and operating (maintenance) costs
requirements of competent authorities (on EU, national or local
levels), eg: town planning or town development aspects
technical requirements (construction legislation, regulations,
standards, etc.)
available construction material, construction products and processes
local aspects relating to the work site and to the execution of the
construction works (eg. soil conditions, weather or environmental
impacts, execution processes, and time- and machinery needs,
etc.)
For the construction of gym halls and sports halls with confined
spaces, excellent solutions are offered by Lindab’s lightweight steel
structure construction products and the systems, subsystems that
can be created by using these products.
The numerous conditions listed above contain both mandatory and
more flexible aspects – even contradictory ones in certain cases –
therefore, the technical specifitactions should be specified individually
that can meet all the requirements at some expected level (even if
at the cost of comprosies) and which become finally interpreted
as ensuring a match with this wide-ranging conditions system. It is
therefore has high importance that the economic construction of each
building at the required technical quality level must take place on the
basis of an individual design.
Among the requirements
set out for buildings
serving the purpose
of sports and physical
exercise,
the
most
important one is a
compliance with the
given function. In the design of school gym halls
or sports halls, the primary aspect is to provide the required space
or proper dimensions for the purpose of sports or physical excerise.
The dimensions needed for physical education at school are set out
by applicable standards; the official dimensions of sports-ground or
play-fields are also regulated in function of the given branch of sport,
which sets the basis for specifying the required hall dimensions. Due
to these requirements, these buildings are typically hall structures
with large span and clear height. A sports hall must or can be
supplemented by various service spaces (eg. store rooms, changing
rooms, bathrooms, offices, conference rooms, etc.) specified partly
by mandatory normative specifications and partly by individual builder
needs.
The following are the main subsystems of Lindab’s lightweight hall structures:
Primary framing structure in steel
Secondary framing structures
Roof- and wall-cladding systems
Supplementary systems, accessories
The primary framing structure of Lindab halls is a spatial framework
made from linearly sequenced planar frames and bracing systems. Three
main frame types are available: solid-section frames are hot rolled, welded
I-profile frames of variable cross-sections, and main lattice girder structures.
Numerous further variants of these main types are possible, depending on
further installations such as side-aisles, intermediate storey(s), crane-runway(s),
etc. A tailor-made solution in conformity with builders’ needs (functional,
aesthetics) and the technical requirements is realized in each case through
individual design, that produces the required large dimensions (span, clear
height), as well as the relevant optimised material consumption and, through
this, economy. The surface protection solutions for the structural elements of
main frames must be specified with view to needs and available options, which
might be multi-layer painting or hot-dip galvanizing.
Upon the primary framing structure of halls, the so-called secondary loadbearing system is installed, which directly supports the roof- and wall
sheeting and which transfers loads to the primary framing. Most frequently
the secondary load-bearing system is constructed by using the optimized
lightweight profiles of the Lindab Construline product family (linearly distributed
load-bearing roof purlin- and wall-stud systems), ensuring excellent loadbearing capacities through high strength, and a long-lasting corrosionresistance through the hot-dip galvanisation surface protection. The secondary
framing can be realized by using Lindab Coverline structural elements too,
using high-profile trapezoidal sheeting on roofs and structural wall-cassette
products on walls.
The Lindab Coverline profiled sheeting products available with
several coating types and in numberless colours provide safe and
watertight roofing, and durable and aesthetical wall cladding not only
for the gym hall itself but also for the service building block. This group
of products offers several architectural solutions for the design of the
external cladding: simple, lined-looking trapezoidal profiles in a range
of dimensions, and
also with “design” patterns available optionally; elegant sinusoidal
profiles; facade wallcassettes providing a
strongly marked rectangular pattern (ECO
and Premium types);
or even standing seam
sheetings (SRP, PLX)
are available. The sandwich panels of various types (all with steel sheeting at both sides with a thermal-insulation core in between) allow for a
quick, thermally insulated cladding of large surfaces.
It is of high importance that besides its main framing and sheeting
components, Lindab offers a wide range of accessories system
as well: the Rainline
roof drainage system,
the Protectline system
for roof safety (snow
fences, roof walkways,
roof- and wall-ladders),
roof ventilation elements,
roof foils, self-drilling
screws, sealing profiles
ensure a perfect design
for the tiniest details.
It is important to note here, that the products and technical solutions
enumerated above allow for a highly free and flexible design. In certain
cases, the wall structures of complete hall buildings can be realized by using
Lindab components and solutions (steel framework structure, roof- and
wall-cladding, roof drainage products and the relevant accessories), while
in other cases Lindab products can be flexibly combined with structures
made from other materials (eg. prefabricated reinforced concrete framings
combined with Lindab lightweight roof- and wall-claddings) in order to
ensure the best and most economic realization of works.
SERVICES
Professional support
In addition to the developing and manufacturing of
excellent quality products, from the very beginning
Lindab has attached importance to being able
to provide professional and technical support
to companies and persons playing a role in the
construction process, at the highest possible level
and in the highest
number of fields all
through the design
and installation of its
products. The quickest
way to have access
to general information
is to use our web site
(www.lindab.hu), while deatiled professional information is available at
the Lindab Designer Portal that can be accessed via the website. In the
following sections, we provide a short summary of the services Lindab
provides, broken down to target groups:
Builders, investors: a collection of references, professional
consultation, putting up designer- and contractor-contacts, preparing
preliminary quotations free of charge (in accordance with the level the
technical specifications have been elaborated to)
Designers: designer guides, technical
guides for applications, design softwares, professional
consultation
Contractor:
short
lead times and flexibility due to local production, excellent logistics,
minimum amounts of
construction wastes
due to a manufacture
with accurate dimensions, safe packaging,
professional consultation.
Advantages offered by Lindab products and systems - for all participants
high-strength steel raw material – high load-bearing capacity,
spanning over large spans
hot-dip galvanization for surface protection – excellent corrosion
protection, hardwearing quality
recyclable steel materials – environmentally friendly products
a wide range of profiles and colours for cladding components aesthetical appearance, at a variety of levels
light weight – small loads to foundations, low transporation
costs, fast realization
mounted, installed, dry technology – fast construction
works, short realization times, faster return of investment
accurate manufacture dimensions – low amounts of wastes
on site
complete system (framings, roof- and wall-cladding, roof
drainage, roof safety, accessories)
variable system components – flexible, variable applications
outstanding services (for designers, contractors and
builders)
Model hall no. 1
Modell hall no. 1 presents an example for halls serving the function of school sports and leisure activities to the minimum level.
This 15-m wide and 30-m long sports hall of 450 m2, with a high roof pitch suitable to hold gym lesson of elementary schools or
secondary educational institutions operating with not more than eight classes (according to the provisions of former Hungarian
standards, the MSZ 24203 series); further, it is suited to accommodate a volleyball- and tennis-court in official tournament
dimensions. Of course, for the purpose of mass sports and leisure activities, the hall can accomodate handball-, basketball- and
indoor footbal courts as well, whose dimensions are less than the official requirements.
At the gable end of the hall building, a service block of minimum floor area (60 m2) is attached to the building, accomodating an
entrance for persons, as well as few indispensable rooms (store room, locker room for a couple of people).
SPECTACULAR DRAWINGS
GYM HALL DIMENSIONS
Width (m)
15.0
Length (m)
30.0
Height of the eaves (m)
8.0
Roof pitch (°/%)
20°
Floor area
450.0
OFFICIAL COURT DIMENSIONS THE HALL CAN ACCOMMODATE
volleyball (9x18m) – 1 court
tennis (10,97x23,77m) – 1 court
HALL BUILDING STRUCTURE
Primary framing
Steel framing structure, made from
profiles produced by hot roll forming
Secondary framing
Lindab Construline steel
purlin- and wall-stud system
Roof cladding
Thermal-insulated mounted
sandwhich structure­
(Lindab tile-effect roofing, roof
foil,­thermal insulation, vapourbarrier, trapezoidal sheets)
Wall cladding
Thermal-insulated mounted
sandwich structure ­­
(Lindab trapezoidal profiles,
thermal insulation, vapourbarrier, trapezoidal sheets)
Roof drainage
Lindab Rainline rainwater
system
SERVICE BUILDING BLOCK
ATTACHED TO THE HALL (OPTIONAL)
Place of attachment
at gable end
Width (m)
10.0
Length (m)
6.0
Height of the eaves (m)
3.0
Roof pitch (°/%)
20°
Floor area
60.0
FUNCTIONALITY OPTIONS FOR THE SERVICE SPACES
Windbreak room, entrance space
Store room, storage space
Changing rooms, lockers
Please note: The model halls, buildings we present here are intended for inspiration, which can be used as starting point for the builders’ own designs, as an aid
450 m
2
Possible application: sports hall of elementary school with maximum eight classes, or secondary educational institution
A
GROUND PLAN
Pm: 4 000
Pm: 4 000
Pm: 4 000
Pm: 4 000
3 000
3 000
5 000
4 000
1 800
5 000
4 000
1 800
5 000
TENNIS
Pm: 4 000
900
900
Pm: 1 300
longitudinal bracing
Pm: 4 000
900
900
Pm: 1 300
Pm: 1 300
A
Pm: 4 000
longitudinal bracing
900
900
VIII.
4 000
1 800
VII.
4 000
1 800
VI.
Pm: 4 000
2 500
V.
4 000
1 800
IV.
4 000
1 800
II. III.
4 000
1 800
I.
VOLLEYBALL
Pm: 1 300
Pm: 1 300
2 500
Pm: 1 300
900
900
SERVICE BLOCK
60 m2
ceramic
1 000
2 400
900
900
SPORTS HALL
450 m2
sports flooring
4 000
1 800
longitudinal bracing
longitudinal bracing
6 000
500
6 000
500
4 000
6 000
-0,20
-1,40
A
20,00°
Projekt
neve:
150
Referenciaszám:
2
2051 Biatorbágy, ±0,00
Állomás u. 1/a
Tel.: 06-23/531-100
2
Fax.: 06-23/310-703
Adószám: 10539260-2-13
Dátum:
Projekt neve:
+3,00
+1,30
external dimensions
of primary +0,80
frame
+2,20
+2,20
2051 Biatorbágy,
Állomás u. 1/a
4
-0,20
Tel.: 06-23/531-100
+0,80
Fax.: 06-23/310-703
+1,30
Adószám:
4 10539260-2-13
15 000
-0,20
15 000
15 Projekt
000
+0,80
Rajz neve:
+3,00
LINDAB TORNACSARNOK
MINTAÉPÜLET 1.
+0,80
Referenciaszám:
neve:
Rajz neve:
LINDAB TORNACSARNOK
Készítette:
MINTAÉPÜLET
1.
LEFTSIDE
FACADE
Biatorbágy, Állomás u. 1/a
06-23/531-100
06-23/310-703
szám: 10539260-2-13
Referenciaszám:
Ellenőrizte:
LEFTSIDE FACADE
+5,80
neve:
3
1 500 850
PE technological membrane
8-10 cm step-proof heat insulation
Ellenőrizte:
damp-proof membrane
Rajzszáma:
5
*according to therno-technical specifications
500
6 000
500
T-1/II.
Méretarány:
+0,80
–
Dátum:
4
2012. november
+0,80
2012. november
30 000
Rajzszáma:
T-1/II.
Méretarány:
–
BACKSIDE FACADE
2012. november
BACKSIDE FACADE
Dátum:
30 000
20,00°
1
1
2
+5,80
2
20,00°
3
2
+5,80
3
+5,80
+4,00
+4,00
2
+5,80
5
-0,20
5
4
4
1. Lindab LPA Maxi tile effect sheet black (015) colour, Classic coating
+1,30
+0,80
+2,20
-0,20
+1,30
+0,80
+3,00
-0,20
30 000
500
-0,20
6 000
30 000
500
6 000
1 LPA Maxi tile effect sheet, .................(...) colour, Classic coated
bevonat
2
LPA
Maxi
tile
effect
sheet,ereszcsatorna,
.................(...).................(...)
colour, Classicszín,
coated
1 Lindab
4. Plastered
plinth
wall,
grey
Rainline
150/100
Elite bevonat
3
5. Window
flashing,
Lindab
sheet,
white
(001)
colour,
Classic
coating
LVP 20lábazati
tarpezoid
.................(...)
2 Vakolt
fal,sheet,
.................(...)
szín szín, Classic bevonat
4
Lindab
Rainline
150/100
ereszcsatorna,
.................(...)
szín,
Elite bevonat
bevonat
3 Ablak szegélyezés, Lindab síklemez, .................(...) szín, Classic
5
4 Vakolt lábazati fal, .................(...) szín
5 Ablak szegélyezés, Lindab síklemez, .................(...) szín, Classic bevonat
+2,80
+2,20
+0,80
-0,20
5
+4,00
+3,00
+0,80
Méretarány:
Dátum:
–
Dátum:
5
15-20 reinforced concrete flooring
25-30 cm gravel fill
original soil
4
6 000
Rajzszáma:
T-1/II.
Méretarány:
-0,20
5
+4,00
+2,80
+0,80
-0,20
4
±0,00
4
±0,00
+0,80
-0,20
15 000
15 000
2. Lindab LVP 20 trapezoidal sheet dark grey (087) colour, Classic coating
LVP 20150/100
tarpezoid
sheet,white
.................(...)
szín,
Classic
3. Lindab Rainline
rain gutter,
(001) colour, Elite
coating
Megrendelő:
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
Fax.: 06-23/310-703
Adószám: 10539260-2-13
2051 Biatorbágy, Állomás u. 1/a
Projekt neve:
LINDAB TORNACSARNOK
MINTAÉPÜLET 1.
Megrendelő:
Projekt
neve:
Referenciaszám:
LINDAB TORNACSARNOK
MINTAÉPÜLET 1.
Rajz neve:
Homlokzatok
Készítette:
Rajz neve:
Ellenőrizte:
Készítette:
Homlokzatok
Rajzszáma:
LPA Maxi tile effect sheet
LTF 180 breathable construc
"Z" purlin (Z200)
15 cm heat insulation betwee
LPZ 110 vapour barrier
LVP 20 tarpezoid sheet
steel frame structure
LVP 20 tarpezoid sheet
"Z" purlin (Z120)
12 cm heat insulation betwee
LPZ 110 vapour barrier
LVP 20 tarpezoid sheet
steel frame structure
2-3 cm sport flloring
8-10 cm floor slab
PE technological membrane
8-10 cm step-proof heat insu
damp-proof membrane
15-20 reinforced concrete flo
25-30 cm gravel fill
original soil
*according to therno-technical spec
*according to therno-technical specifications
Rajzszáma:
A-A metszet*according to therno-technical specifications
2-3 cm sport flloring
+4,00
Ellenőrizte:
+1,30
brick footing
PE technological membrane
8-10 cm step-proof heat insulation
damp-proof membrane
15-20 reinforced concrete flooring
25-30 cm gravel fill
original soil
Készítette:
8-10 cm floor3slab
A-A metszet
+4,00
+1,30
+2,20
Készítette:
A-A metszet
1 500
8 000
2
brick footing
15 000
Megrendelő:
3
+2,20
Projekt neve:
anchoring level
3
2-3 cm sport flloring
–
2
LINDAB TORNACSARNOK
MINTAÉPÜLET 1. +5,80
anchoring level
3
floor level
2-3 cm sport flloring
8-10 cm floor
slab
Projekt neve:
Rajz neve:
A-A metszet
PE technological membrane
12 cm heat insulation between*
LINDAB TORNACSARNOK
LPZ 110 vapour barrier
Készítette: heat insulation
MINTAÉPÜLET8-10
1. cm step-proof
damp-proof membrane
LVP 20 tarpezoid
anchoring
levelsheet
Ellenőrizte:concrete flooring
15-20 reinforced
steel frame structure Referenciaszám:
25-30 cm gravel fill
brick footing
original soil
8-10 cm floor slab
RIGHTSIDE 3
FACADE
2
2012.1novemberRajz
Referenciaszám:
2
RIGHTSIDE FACADE
1
floor level
LTF 180 breathable construction foil
"Z" purlin (Z200)
15 cm heat insulation between*
LPZ 110 vapour barrier
2
LVP 20 tarpezoid sheet
steel frame structure
2
LVP
20 tarpezoid
floor
level sheet
"Z" purlin (Z120)
12 cm heat insulation between*
anchoring
LPZ 110 vapourlevel
barrier
LVP 20 tarpezoid sheet
steel
frame
structure
brick
footing
T-1/III.
Méretarány:
+3,00
+2,20
15 000
Rajzszáma:
LPA Maxi
tile effect sheet
2012.
november
LPA Maxi tile effect sheet
3
±0,00LVP 20 tarpezoid
LTF 180 breathable construction foil
sheet
"Z" purlin (Z200)
"Z" purlin (Z120)
15 cm heat insulation between*
12 cm heat insulation between*
foundations
(according
LPZ
110 vapour
barrier to static specifications)
LPZ 110 vapour barrier
LVP 20 tarpezoid sheet
LVP 20 tarpezoid sheet
15 000
steel frame structure
steel frame structure
Megrendelő:
"Z" purlin (Z200)
15 cm heat 2051
insulation
between*
Biatorbágy,
Állomás u. 1/a
Tel.: 06-23/531-100
LPZ 110 vapour
barrier
Fax.: 06-23/310-703
LVP 20 tarpezoid
sheet
Adószám: 10539260-2-13
steel frame structure
15 000
B-B metszet
3
+3,00
foundations (according to static specifications)
Megrendelő:
2
3
Ellenőrizte: 15 000
Megrendelő:
external dimensions of primary frame
1
2
LVP 20 tarpezoid sheet
Maxi tile effect sheet
2 floor
1 3 LPA
"Z" purlin (Z120)
LTF 180 breathable construction foil
level
external dimensions of primary frame
specifications)
1
1
external dimensions of primary frame
to static specifications)
2
Rajz neve:
LINDAB
TORNACSARNOK
foundations
(according
to static
Készítette:
MINTAÉPÜLET 1.
-0,20
-1,40
eaves height
Dátum:
eaves height
–
"LS" Euro section primary framing
(according to static specifications)
6 000
±0,00
2-3 cm sport flloring
8-10 cm floor slab
PE technological membrane
8-10 cm step-proof heat insulation
foundations
damp-proof
membrane (according
15-20 reinforced concrete flooring
25-30 cm gravel fill
original soil
±0,00
±0,00
-0,20
ridge height
1
T-1/I.
Méretarány:
150
1 500 850
1 500
2 200
1 500
1 500
3
150
2 200
1 500
6 000
+0,80
±0,00
foundations (according to static specifications)
eaves height
FRONT FACADE
20,00°
±0,00
*according
to therno-technical specifications
+2,20
eaves
+0,80height
ridge height
6 000
FRONT FACADE
-0,20
Megrendelő:
-1,40
ridge height
3
1 500
1 500
1 500
1 500 850
8 000
1 500 850
1 500
+0,80
2
20,00°
LVP 20 tarpezoid sheet
steel frame structure
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
Fax.: 06-23/310-703
Adószám: 10539260-2-13
1 500
external eaves height of frame structure
8 000
±0,00
LPZ 110 vapour barrier
LVP 20 tarpezoid sheet
steel frame structure
Ellenőrizte:
20,00°
150
0
70
1 07 1 0
Rajzszáma:
0
1 07
0
1 03
+7,80
+7,80
"LS" Euro1section primary framing
(according to static specifications)
"LS" Euro section primary framing
(according
1 to static specifications)
6 000
+0,80
Alaprajz
Készítette:
20,00°
150 Referenciaszám:
±0,00
±0,00
"LS" Euro sectionLVP
primary
framing
Maxi tile effect sheet
20 tarpezoid
sheet
1 LPA
LTF 180 breathable construction
foil to2
"Z" purlin
(Z120)
(according
static
specifications)
-0,20
"Z" purlin (Z200)
12 cm heat insulation between*
ELEVATION
15 cm heat insulation between*
LPZ-1,40
110 vapour barrier
2 200
+0,80
external eaves height of frame structure
0
1 03 ORDER OF LAYERS:
150
500
Rajz neve:1
LINDAB TORNACSARNOK
MINTAÉPÜLET 1.
150
0
1 03
0
1
1
1 07 88
7 98
0
70
1 07 1 0
brick footing
0
70
500
1 07 1 0
6 000
500
6 000
0
1 07
+7,80
8 000
+3,00
external eaves height of frame structure
0
1
1 07 88
70
1 07 1 0
0
70
500
1 07 1 0
0
1 07
+10,53
+7,80
0
1 07 1
0
1 07
0
1
1 07 88
0
1
7 98
0
7
1 07 1 0
ridge height
+10,53
+10,53
1 500
500
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
30
Fax.: 06-23/310-703
+7,80 98110
7
Adószám: 10539260-2-13
0
-0,20
6 000
20,00°
150
1 500
Megrendelő:
0
1
1
1 07 88
7 98
0
70
1 07 1 0
070Projekt neve:
external eaves height of frame structure
+10,53
+10,53
4 000
6 000
2 200
1
±0,00
1 000
30 000
SECTIONS
+0,80
1 000 1 000
4 000
6 000
6 500
4 000
1 800
1 000 1 000
B
Pm: 4 000
4 000
1 800
1 000 1 000
4 000
6 000
Pm: 4 000
4 000
1 800
1 000 1 000
4 000
Pm: 4 000
4 000
1 800
Pm: 4 000
4 000
1 800
Pm: 4 000
1 000
15 000
2 400
2 400
900
900
10 000
1 000
2 400
T-1/IV.
Méretarány:
–
Rajzszáma:
Dátum:
2012.
november
T-1/IV.
Méretarány:
–
T-1/II.
–
2012. november
Model hall no. 2
Model hall no. 2 presents an example for halls serving the function of school sports and leisure adctivities in an average,
comfortable way. This 30-m wide and 30-m long sports hall of 900 m2, with a gentle roof pitch and an eaves height of
~10m is suitable to hold gym lessons of elementary schools or secondary educational institutions operating with not more
than sixteen classes, or even special needs education with up to eight classes (according to the provisions of former
Hungarian standards, the MSZ 24203 series); further it is suited to accommodate volleyball-, tennis- and basketball-court.
Of course, for the purpose of mass sports and leisure activities, the hall can accommodate handball- and indoor footbalcourts as well, whose dimensions are less than the official requirements.
At the gable end of the hall building a single-storey, lean-to roofed social block with a floor area of ~300 m2 is attached to
the building, that serves the social functions adequatelly. It is accommodating rooms for storage of sport equipment and
also spaces for personal needs (locker room, bathroom, toilet).
SPECTACULAR DRAWINGS
GYM HALL DIMENSIONS
Width (m)
30.0
Length (m)
30.0
Height of the eaves (m)
10.0
Roof pitch (°/%)
10%
Floor area
900.0
OFFICIAL COURT DIMENSIONS THE HALL CAN ACCOMMODATE
volleyball (9x18m) – 2 db
tennis (10,97x23,77m)– 2 db
basketball (15x28m)– 1 db
HALL BUILDING STRUCTURES
Primary framing
Steel farming structure,
variable cross section welded
sections
Secondary framing
Lindab Construline steel
purlin- and wall-stud system
Roof cladding
Lindab sandwichpanel
Wall cladding
Lindab sandwichpanel (laid
horizontally); 4m tall plinth wall
beneath
Roof drainage
Lindab Rainline rainwater
system
SERVICE BUILDING BLOCK ATTACHED TO THE HALL (OPTIONAL)
Place of attachment to hall
at gable end
Width (m)
10.0
Length (m)
30.0
Height of eaves (m)
3.5
Roof pitch (°/%)
10%
Floor area
300.0
FUNCTIONALITY OPTIONS FOR THE SERVICE SPACE
Windbreak room,
entrance space
Changing rooms, lockers
Store room, storage
space
Toilet, shower
Please note: The model halls, buildings we present here are intended for inspiration, which can be used as a starting point for the builders’ own designs, as an aid.
900 m
2
Possible application: elementary and secondary schools with eight to sixteen classes and special needs education
1 500
3 000
1 500
3 000
IX.
BASKETBALL
SPORTS HALL
900 m2
sports flooring
SERVICE BLOCK
300 m2
ceramic
2 400
2 400
1 500
3 000
Pm: 4 000Pm: 4 000Pm: 4 000
Pm: 4 000Pm: 4 000Pm: 4 000
1 500
3 000
1 500
1 500
3 000
1 500
6 000
1 500
3 000
1 500
3 000
1 500
3 000
3 000
3 000
1 500
3 000
B
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
B
Pm: 4 000Pm: 4 000Pm: 4 000
1 500
1 500
1 500
3 000
1 500
1 500
3 000
1 500
1 500
3 000
1 500
3 000
1 500
1 500
3 000
+12,64
A
1 500
3 000
1 500
Pm: 4 000Pm: 4 000Pm: 4 000
1 500
3 000
1 500
1 500
3 000
750
500
Pm: 4 000Pm: 4 000Pm: 4 000
1 500
3 000
500
5 000
10 000
1 500
3 000
5 000
5 000
longitudinal bracing
Pm: 4 000Pm: 4 000Pm: 4 000
1 500
3 000
5 000
longitudinal bracing
Pm: 4 000Pm: 4 000Pm: 4 000
1 500
3 000
Pm: 900
1 500
3 000
Pm: 900
1 500
3 000
Pm: 900
1 000
2 400
1 200
1 500
1 200
1 500
1 200
1 500
1 200
1 500
1 200
1 500
1 200
1 500
Pm: 900
Pm: 900
Pm: 900
1 200
1 500
Pm: 900
1 200
1 500
Pm: 900
1 200
1 500
Pm: 900
6 000
6 000
1 000
2 400
1 500
3 000
6 000
Pm: 4 000Pm: 4 000Pm: 4 000
VOLLEYBALL
1 500
3 000
6 000
TENNIS
30 000
TENNIS
1 500
3 000
6 000
longitudinal bracing
VOLLEYBALL
A
Pm: 4 000Pm: 4 000Pm: 4 000
6 000
Pm: 4 000Pm: 4 000Pm: 4 000
1 500
3 000
VIII.
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
VII.
Pm: 4 000Pm: 4 000Pm: 4 000
Pm: 4 000Pm: 4 000Pm: 4 000
Pm: 4 000Pm: 4 000Pm: 4 000
1 500
3 000
VI.
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 200
1 500
V.
Pm: 4 000Pm: 4 000Pm: 4 000
longitudinal bracing
1 000
2 400
6 000
Pm: 900
Pm: 4 000Pm: 4 000Pm: 4 000
1 200
1 500
30 000
Pm: 900
Pm: 900
1 200
1 500
B
III. IV.
1 200
1 500
1 200
1 500
Pm: 900
Pm: 900
1 200
1 500
6 000
1 200
1 500
Pm: 900
6 000
Pm: 900
1 200
1 500
II.
Pm: 900
Pm: 900
1 200
1 500
Pm: 900
I.
1 200
1 500
1 500
3 000
A
GROUND PLAN
1
1 500
1 500
750 750
1 500
6 000
750 750
1 500
6 000
750 750
1 500
6 000
500
750 750
1 500
6 000
750
+11,30
6 000
30 000
Megrendelő:
SECTIONS
Projekt neve:
Rajz neve:
LINDAB TORNACSARNOK
MINTAÉPÜLET 2.
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
Fax.: 06-23/310-703
Adószám: 10539260-2-13
Referenciaszám:
Rajzszáma:
Alaprajz
Készítette:
Méretarány:
Ellenőrizte:
Dátum:
T-2/I.
–
2012. november
2
+12,64
1
+12,64
+11,30
500
1 417
500
+11,30
3
5,71° = 10 %
15 075
1 500
1 500
1 500
1 500
1 500
1 500
1 500
1 500
1 657
5,71° = 10 %
1
ridge height
3 000
+9,80
eaves height
+3,80
6 000
"LH" welded "I" section frame with variable cross section
(according to static specifications)
2
brick footing
10 000
4
3
5,71° = 10 %
(external eaves height of frame structure)
2
+3,80
+3,80
±0,00
brick footing
5
-0,20
brick footing
4 000
4
foundations (according to static specifications)
5 000
5 000
500
6 000
5 000
6 000
500
6 000
-0,20
6 000
6 000
±0,00
6 000
-0,20
-1,40
±0,00
6 000
1 200
5
±0,00
foundations (according to static specifications)
5 000
5
6 000
foundations (according to static specifications)
6 000
floor level
6 000
anchoring level
30 000
(external dimensions of primary frame)
ORDER OF LAYERS:
1
Lindab roof panel 100 mm
"Z" purlin (Z200)
steel frame structure
1
ORDER OF LAYERS:
ORDER OF LAYERS:
2
Lindab wall panel 100 mm (horizontal)
steel frame structure
3
1
FRONT FACADE
Megrendelő:
Projekt neve:
ELEVATION
LINDAB TORNACSARNOK
MINTAÉPÜLET 2.
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
Fax.: 06-23/310-703
Adószám: 10539260-2-13
4
Lindab PLX standing seam roofing
wooden boarding (2,4 cm)
Lindab roof panel 100
5x5 cm counter batten every 1 m with ventilated air space
purlin (Z200)
Lindab LTP 20 trapezoid cladding "Z"
(2 cm)
LTF 180 breathable construction foil
steel frame structure
Lindab Z 200 purlin system
20 cm mineral wool heat insulation between
LPZ 110 vapour barrier
gypsum plasterboard supporting frame (2 cm)
2 ply gypsum plasterboard cladding (2,5 cm)
Referenciaszám:
FRONT FACADE
Rajz neve:
interior plaster (1 cm)
hollow block brick wallLindab
(38 cm) wall
mm
facade heat insulation system (5 cm)
steel frame
exterior plaster (1,5 cm)
2
5
2-3 cm sport flloring
8-10mm
cm floor
slab
panel 100
(horizontal)
PE technological membrane
structure
8-10 cm step-proof heat insulation
damp-proof membrane
15-20 reinforced concrete flooring
25-30 cm gravel fill
original soil
Rajzszáma:
B-B metszet
Készítette:
Méretarány:
Ellenőrizte:
Dátum:
+12,64
Megrendelő:
+11,30
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
Fax.: 06-23/310-703
2
Adószám: 10539260-2-13
+12,64
+11,30
3
T-2/III.
Lindab roof panel 100 mm
"Z" purlin (Z200)
steel frame structure
2
Lindab wall panel 100 mm (horizontal)
steel frame structure
4
Lindab PLX standing seam roofing
wooden boarding (2,4 cm)
5x5 cm counter batten every 1 m with
ventilated air space
Megrendelő:
Lindab LTP 20 trapezoid cladding (2 cm)
LTF 1802051
breathable
construction foil
Biatorbágy, Állomás u. 1/a
Lindab ZTel.:
200
purlin system
06-23/531-100
Fax.: 06-23/310-703
20 cm mineral
wool heat insulation between
Adószám: 10539260-2-13
LPZ 110 vapour barrier
gypsum plasterboard supporting frame (2 cm)
2 ply gypsum plasterboard cladding (2,5 cm)
2012. november
Projekt neve:
interior plaster (1
hollow block brick wall (38 cm)
heat insulation
system (5 cm)
Rajz neve:
A-A metszet
exterior plaster (1,5 cm)
facade
Projekt neve:
LINDAB TORNACSARNOK
MINTAÉPÜLET 2.
Referenciaszám:
3
+12,64
Ellenőrizte:
2
7
+3,30
-0,20
6 000
-0,20
6 000
6 000
6 000
+0,90
+4,00
+4,00
5
+2,40
5 000
500
64000
6 000
6 000
6 000
6 000
5 000
500
6 000
6 000
6 000
6 000
6 000
+0,90
5 000
6 000
+7,00
4
5 000
+0,90
6 000
LEFTSIDE FACADE
BACKSIDE FACADE
LEFTSIDE FACADE
+12,64
+11,30
+9,80
BACKSIDE FACADE
+12,64
+11,30
+9,80
+12,64
+11,30
1
+9,80
+12,64
3
2
1
+11,30
+7,00
3
7
2
+9,80
7
+7,00
7
+7,00
+4,00
2
2
+7,00
7
+4,00
5
4
+2,80
+2,40
4
+4,00
-0,20
4
6 000
-0,20
2012. november
+7,00
3
7
+4,33
6
6 000
–
2
5
6 000
T-2/III.
Méretarány:
Dátum:
5
+2,40
6 000
Ellenőrizte:
B-B metszet
1
Készítette:
Referenciaszám:
+3,30
5
6 000
Készítette:
2-3 cm sport flloring
8-10 cm floor slab
PE technological
membrane
Rajzszáma:
T-2/II.
8-10 cm step-proof heat insulation
damp-proof
membrane
Méretarány:
–
15-20 reinforced concrete flooring
25-30 cmDátum:
gravel fill
2012. november
original soil
RIGHTSIDE FACADE
+4,33
+2,40
5
+12,64FACADE
RIGHTSIDE
Rajzszáma:
Rajz neve:
LINDAB TORNACSARNOK
MINTAÉPÜLET 2.
2
+0,90
2-3 cm sport flloring
8-10 cm floor slab
PE technological membrane
8-10 cm step-proof heat insulation
damp-proof membrane
15-20 reinforced concrete flooring
cm)
25-30 cm gravel fill
original soil
–
1
6
+2,40
5
5
6 000
6 000
6 000
6 000
500
5 000
+0,90
+2,40
5 000
+0,90
1. Lindab roof panel signal blue (RAL 5010) colour
2. Lindab
wall panel signal blue (RAL
5010) and white (RAL 9002)
6 000
6 000
6 000colour
1
2
Lindab
Rainline
5. Plastered
wall,
grey 190/120 ereszcsatorna, .................(...) szín, Elite bevonat
3 brick
lábazati
fal,sheet
.................(...)
szín (001) colour, Elite coating
6. Lindab4
standing
seam
cladding, szín
white
Lindab
tetőpanel
.................(...)
1PLXVakolt
Vakolt téglafalazat,
7. Window
Lindab
steel.................(...)
sheets, interior
white (078) Classic coating
Lindab
falpanel.................(...)
szín szín
5
2 flashing,
korcolt
lemezfedés,
.................(...)
szín, Elite
bevonat
Rainline
190/120
ereszcsatorna,
.................(...)
szín,
Elite bevonat
6
3 Lindab PLX
Lindab síklemez,
Vakolt szegélyezés,
lábazati fal, .................(...)
szín.................(...) szín, Classic bevonat
7
4 Ablak
5 Vakolt téglafalazat, .................(...) szín
6 Lindab PLX korcolt lemezfedés, .................(...) szín, Elite bevonat
7 Ablak szegélyezés, Lindab síklemez, .................(...) szín, Classic bevonat
6 000
6 000
500
5 000
+4,00
+2,80
-0,20
6 000
4
6 000
6 000
6 000
6 000
6 000
6 000
6 000
6 000
6 000
-0,20
5 000
Lindab
tetőpanel
szín colour, Elite coating
3. Lindab Rainline
190/120
rain.................(...)
gutter, white (001)
Lindabwall,
falpanel.................(...)
szín
4. Plastered plinth
grey
Megrendelő:
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
Fax.: 06-23/310-703
Adószám: 10539260-2-13
Projekt neve:
LINDAB TORNACSARNOK
MINTAÉPÜLET 2.
Megrendelő:
Rajz neve:
Homlokzatok
Rajzszáma:
Készítette:
Méretarány:
Referenciaszám:
Ellenőrizte:
Dátum:
Projekt neve:
Rajz neve:
LINDAB TORNACSARNOK
Homlokzatok
Rajzszáma:
T-2/IV.
–
2012. november
T-2/IV.
Model hall no. 3
Model hall no. 3 presents an example for hall equipped to a high level of standard in a spacious way. The 30-m wide and
48-m long sports hall of 1.440 m2, with flat roof and eaves height of ~12m is suitable to hold gym lessons of elementary
schools or secondary educational institutions operating up to twentyfour classes. It is suited to accommodate more
volleyball- and tennis-courts, two basketball-courts crossways and even handball- and indoor football-courts longways.
The spacious interior allows temporary detachments, even 2 or 3 seperate practicable places. It is suitable for any kind of
mass sports and leisure activities and also for organizing events.
At the longitudinal side a two-storey, lean-to roofed social block with a floor area of ~430 m2 is attached to the building,
that serves the social functions at a perfect level. It is able to accommodate storage rooms, rooms for social needs (locker
rooms, bathrooms, toilets, showers), medical rooms, offices, even negotiating and conference rooms. Thus the complete
building is appropriate for mulitple, mulitfunctional purposes in an efficient and economical way.
SPECTACULAR DRAWINGS
GYM HALL DIMENSIONS
Width (m)
30.0
Length (m)
48.0
Height of the eaves (m)
11.5
Roof pitch (°/%)
2°
Floo area
1.440.0
OFFICIAL COURT DIMENSIONS THE HALL CAN ACCOMMODATE
volleyball (9x18m) – 4 db
handball (20x40m) – 1 db
tennis (10,97x23,77m) – 3 db
futsal (20x40m) – 1 db
basketball (15x28m) – 2 db
HALL BUILDING STRUCTURE
Primary framing
Anchored steel columns
+ steel truss-girder
Secondary framing
Load-bearing floor deck
from Lindab high profile
trapezoid sheet (LTP150)
Roof cladding
Soft, warm-deck roof
(water insulation, heat
insulation, vapour barrier)
Wall cladding
Brick wallwork
Roof drainage
Internal gutter system
SERVICE BUILDING BLOCK ATTACHED TO THE HALL (OPTIONAL)
Place of attachment to hall
longitudinal end
Width (m)
9.0
Length (m)
24.0
Height of the eaves (m)
8.0
Roof pitch (°/%)
10%
Floor area
216.0
FUNCTIONALITY OPTIONS FOR THE SERVICE SPACE
Windbreak room, entrance
space
Toilet, shower
Store room, storage space
Medical room
Changing rooms, lockers
Offices, conference room
Please note: The model halls, buildings we present here are intended for inspiration, which can be used as a starting point for the builders’ own designs, as an aid.
1.440 m
2
Possible application: elementary and secondary schools with 8, 16 an 24 classes
750
1 500
3 000
1 500
3 000
1 500
3 000
1 200
1 500
1 200
1 500
Pm: 900
Pm: 900
Pm: 900
Pm: 900
Pm: 900
1 200
1 500
1 200
1 500
1 200
1 500
1 200
1 500
1 200
1 500
1 500
1 500
1 500
750 750
1 500
1 500
1 500
1 500
1 500
B
1 500
750 750
1 500
3 000
1 500
1 500
3 000
1 500
1 500
3 000
1 500
750 750
1 500
3 000
1 500
3 000
1 500
3 000
750
1 500
3 000
500
B
C
4 500
D
+12,30
+12,30
A
1 200
1 500
1 000
2 400
1 000
2 400
1 200
1 500
Pm: 900
2 400
2 400
Pm: 900
1 200
1 500
Pm: 900
1 200
1 500
1 200
840
Pm: 900
1 1
30 000
1 500
3 000
3 000
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
750 750
1 500
3 000
4 500
1 200
1 500
1 500
3 000
9 500
1 200
1 500
A
1 500
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 900
Pm: 900
1 200
1 500
Pm: 900
2 880
420 1 200
1 200 420
1 200
1 500
SERVICE BLOCK
216 m2
ceramic
1 500
3 000
840
1 200
1 500
1 500
3 000
Pm: 6 000Pm: 6 000Pm: 6 000
1 500
3 000
Pm: 6 000Pm: 6 000Pm: 6 000
1 500
3 000
1 500
3 000
1 500
3 000
3 000
3 000
1 500
3 000
500
longitudinal bracing
Pm: 6 000Pm: 6 000Pm: 6 000
1 000
2 400
1 500
3 000
1 500
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
longitudinal bracing
Pm: 6 000Pm: 6 000Pm: 6 000
1 500
3 000
1 500
3 000
Pm: 900
1 500
3 000
Pm: 900
6 000
1 500
3 000
Pm: 900
1 500
3 000
1 500
3 000
HANDBALL
VOLLEYBALL
VOLLEYBALL
1 500
3 000
1 500
3 000
TENNIS
VOLLEYBALL
1 500
3 000
1 500
3 000
6 000
39 500
1 500
3 000
longitudinal bracing
SPORTS HALL
1440 m2
sports flooring
1 500
3 000
1 500
3 000
B
1 500
3 000
1 500
3 000
TENNIS
IX.
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 6 000Pm: 6 000Pm: 6 000
6 000
6 000
1 500
3 000
VIII.
Pm: 6 000Pm: 6 000Pm: 6 000
BASKETBALL
TENNIS
Pm: 6 000Pm: 6 000Pm: 6 000
1 500
3 000
VII.
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 6 000Pm: 6 000Pm: 6 000
1 500
3 000
VI.
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 6 000Pm: 6 000Pm: 6 000
1 500
3 000
V.
Pm: 6 000Pm: 6 000Pm: 6 000
BASKETBALL
VOLLEYBALL
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
1 500
3 000
IV.
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 900
6 000
1 500
3 000
Pm: 6 000Pm: 6 000Pm: 6 000
1 500
3 000
III.
Pm: 6 000Pm: 6 000Pm: 6 000
longitudinal bracing
Pm: 6 000Pm: 6 000Pm: 6 000
Pm: 6 000Pm: 6 000Pm: 6 000
1 500
3 000
1 500
3 000
II.
1 500
3 000
1 500
3 000
I.
1 500
3 000
A
GROUND PLAN
750
1 500
1 500
1 500
750 750
1 500
6 000
+12,30
1 500
1 500
6 000
750
735
1 200
650
2,0°
1 200
650
365 1 000
1 200 500
300
6 000
2 400
1 000 735
650
650
365 1 200
1 200
1 200
750
300
500
1 200
1 200
1 200 365
650
650
735
+11,30
+11,30
6 000
6 000
48 000
Megrendelő:
1 500
750 750
1
1 500
1 500
1 500
750
6 000
Projekt neve:
Rajz neve:
LINDAB TORNACSARNOK
MINTAÉPÜLET 3.
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
Fax.: 06-23/310-703
Adószám: 10539260-2-13
SECTIONS
Referenciaszám:
Rajzszáma:
Alaprajz
Készítette:
Méretarány:
Ellenőrizte:
Dátum:
T-3/I.
–
5,71° = 10 %
2012. november
3
(external eaves height of frame structure)
2
+12,30
+11,30
+12,30
+9,80
+11,30
5,71° = 10 %
3
2
5 5
±0,00
±0,00
6 000
6 000
6 000
6 000
6 000
6 000
5
-0,20
6 000
-1,40
6 000
±0,00
6 000
6 000
6 000
6 000
6 000
4
5
6 000
±0,00
5
±0,00
±0,00
-0,20
-1,40
foundations (according to static specifications)
4
6 000
6 000
±0,00
-0,20
1 200
6 000
6 000
6 000
±0,00
±0,00
foundations (according to static specifications)
±0,00
±0,00
-0,20
-0,20
1 200
6 000
6 000
+8,00
"LR" truss girder structure
(according to static specifications)
11 500
foundations
(according
to static
specifications)
foundations
(according
to static
specifications)
6 000
6 000
1
2,0°
(external eaves height of frame structure)
2
+8,00
"LR" rácsos keretszerkezet
(according to static specifications)
11 500
1
6 000
1 500
6 000
+9,80
+9,80
+11,30
2 2
1 500
6 000
-0,20
-1,40
-0,20
-1,40
foundations (according to static specifications)
30 000
±0,00
30 000
(external dimensions of primary frame)
(external dimensions of primary frame)
500
9 000
500
9 000
ORDER OF LAYERS:
ORDER OF LAYERS:
ORDER
LAYERS:
ORDER
OFOF
LAYERS:
1
ORDER OF LAYERS:
waterproof
PVC membrane
waterproof
PVC
membrane
waterproof
PVC
membrane
11
step-proof mineral wool heat insulation 16-20 cm
1
22 1
55
Megrendelő:
3
ELEVATION
Referenciaszám:
Készítette:
Méretarány:
Ellenőrizte:
Dátum:
2012. november
Megrendelő:
Rajz
neve:
Rajz
neve:
Projekt
neve:
Projekt
neve:
Tel.: 06-23/531-100
Fax.: 06-23/310-703
Referenciaszám:
Referenciaszám:
FRONT
FACADE
Adószám:
10539260-2-13
Lindab PLX standing seam roofing
wooden boarding (2,4 cm)
5x5 cm counter batten every 1 m with ventilated air space
Lindab LTP 20 trapezoid cladding (2 cm)
LTF 180 breathable construction foil
4
Lindab Z 200
purlin system
interior
plaster
(1 cm)
20 cm mineral wool heat insulation between
hollow
brick wall (38 cm)
LPZ 110 block
vapour barrier
gypsum plasterboard supporting frame (2 cm)
facade
heat insulation system (5 cm)
2 ply gypsum plasterboard cladding (2,5 cm)
exterior plaster (1,5 cm)
Projekt neve:
Rajz neve:
LINDAB TORNACSARNOK
MINTAÉPÜLET 3.
Referenciaszám:
Készítette:
Ellenőrizte:
interior plaster (1 cm)
hollow block brick wall (38 cm)
facade heat insulation system (5 cm)
exterior plaster (1,5 cm)
5
5
2-3 cm sport flloring
8-10 cm floor slab
PE technological membrane
8-10 cm step-proof heat insulation
damp-proof membrane
2-3 cm sport flloring15-20 reinforced concrete flooring
25-30 cm gravel fill
8-10 cm floor slab original soil
PE technological membrane
8-10 cm step-proof heat insulation
damp-proof membrane
Rajzszáma:
A-A metszet
15-20 reinforced concrete flooringT-3/II.
25-30 cm gravelMéretarány:
fill
–
original soil
Dátum:
2012. november
–
Projekt neve:
B-B
metszet
B-B
metszet
Rajz neve:
Rajzszáma:
Rajzszáma:
Referenciaszám:
Ellenőrizte:
Ellenőrizte:
Dátum: Ellenőrizte:
Dátum:
Rajzszáma:
A-A metszet
T-3/III.
T-3/III.
LINDAB TORNACSARNOK
Készítette:
MINTAÉPÜLET 3.Méretarány:
Méretarány:
LINDAB
TORNACSARNOK
LINDAB
TORNACSARNOK
Készítette:
MINTAÉPÜLET
Készítette:
MINTAÉPÜLET
2051 Biatorbágy,
Állomás
u. 1/a 3. 3.
2051
Biatorbágy,
Állomás
u. 1/a
2051
Biatorbágy,
Állomás
u. 1/a
Tel.:
06-23/531-100
Tel.:
06-23/531-100
Fax.:
06-23/310-703
Fax.:
06-23/310-703
Adószám:
10539260-2-13
Adószám:
10539260-2-13
4
2
Projekt neve:
Megrendelő:
Megrendelő:
2
Lindab
Z 200 flooring
purlin
system
15-20
reinforced
concrete
flooring
15-20
reinforced
concrete
20
cm
mineral wool heat
insulation between
25-30
gravel
25-30
cmcm
gravel
fill fill
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
LPZ 110 vapour barrier
original
original
soilsoil
heat insulated facade system 10 cm
Fax.: 06-23/310-703
gypsum plasterboard supporting
frame (2 cm)
Adószám: 10539260-2-13
Rajzszáma:
Rajz neve:
brick wall 30
B-Bcm
metszet
T-3/III.
2 ply gypsum plasterboard cladding (2,5 cm)
LINDAB TORNACSARNOK
MINTAÉPÜLET 3.
2051 Biatorbágy, Állomás u. 1/a
Tel.: 06-23/531-100
Fax.: 06-23/310-703
Adószám: 10539260-2-13
5
3
waterproof PVC membrane
step-proof mineral wool heat insulation 16-20 cm
vapour barrier
Lindab LTP 150 load-bearing floor deck profile
steel frame structure
2-3 cm sport
flloring
PVC
membrane
heat insulated facade system 10 cm heat waterproof
Lindab
PLX standing seam roofing
sport
flloring
insulated
facade
system
2-32-3
cmcm
sport
flloring
heat insulated
facade
system
10 10
cmcm
8-10 cm floor slab
brick wall 30 cm
step-proof
wool heat insulation 16-208-10
cm8-10
wooden
floor
slab boarding (2,4 cm)
step-proof
mineral
wool
heat
insulation
16-20
brick
wall
30
cmmineral
cmcm
floor
slab
technological
membrane
step-proof
mineral
wool
heat
insulation
16-20
cmcm
brick
wall
30PE
cm
vapour
barrier
heat insulated facade system 10 cm
8-10 barrier
cm step-proof heat insulation
Lindab LTP
150 load-bearing
vapour
wallventilated
30 cm
5x5 cm
counter batten every 1 m brick
with
air space
technological
membrane
vapour
barrier floor deck profile
PEPE
technological
membrane
vapour
barrier
damp-proof membrane
steel frame structure
Lindab
LTP
150concrete
load-bearing
floor deck profile8-10
Lindabheat
LTP
20insulation
trapezoid cladding (2 cm)
8-10
step-proof
heat
Lindab
load-bearing
floor
deck
profile
cmcm
step-proof
insulation
15-20
reinforced
flooring
Lindab
LTPLTP
150150
load-bearing
floor
deck
profile
cm gravel
fill
steel25-30
frame
structure
LTF
180
breathable
construction
foil
damp-proof
membrane
steel
frame
structure
damp-proof
membrane
steel
frame
structure
Megrendelő:
original soil
2
T-3/II.
Méretarány:
– –
RIGHTSIDE
2012.
november
2012.
november
FACADE
Dátum:
–
2012. november
+12,30
+12,30
5,71° = 10 %
+9,00
3
+9,00
+9,00
2
+6,40
+6,40
+6,00
+6,00
+2,80
+2,40
6 000
6 000
6 000
6 000
6 000
+4,90
1
1
+2,80
+0,90
-0,20
6 000
1
+2,40
+0,90
6 000
+6,00
+4,90
1
-0,20
6 000
9 000
500
30 000
LEFTSIDE FACADE
BACKSIDE FACADE
+12,30
5,71° = 10 %
+12,30
+9,00
+9,00
+6,00
+6,00
+6,40
+4,90
1
1
-0,20
+2,80
+2,40
+0,90
-0,20
6 000
6 000
6 000
6 000
6 000
6 000
6 000
6 000
30 000
1. Plastered brick wall in colours of the spectacle
2. Lindab Rainline 190/120 rain gutter, dark grey (087) colour, Elite coating
3. Lindab PLX standing seam profile, dark grey (087) colour, Elite coating
1
2
3
Vakolt téglafalazat .................(...) szín
Lindab Rainline 190/120 ereszcsatorna, .................(...) szín, Elite bevonat
Lindab PLX korcolt lemezfedés, .................(...) szín, Elite bevonat
500
9 000
1
References
Lindab building solutions for gymnasiums and sports
halls from the smallest to the largest!
Take a look at some of the realized sport institutions, gym halls,
where the idea of a school, district or city got into shape with the
application of Lindab products. It can be about a sportspace
with 400-500m2 floorspace or even a hall with a floorspace of
10.000m2.
Every unique idea and plan can be put into practice by Lindab
products and systems according to the respective needs of a
school, local government, sport institution or an investor.
Building: Location: Hall size: Lindab products: City sportcentre
Alsózsolca (Borsod-Abaúj-Zemplén megye / HUNGARY)
~ 1 500 m2
Construline purlin and wall-stud system, Coverline roof- and wallcladding­trapezoidal profiles (LTP45, LVP20), Rainline rainwater
system, flashings
Building: Location: City sportcenre
Sátoraljaújhely (BorsodAbaúj-Zemplén megye
/ HUNGARY)
Construction year: 2002
Hall size: ~28x55m (~1540m2)
Lindab products: Construline purlin- and wallstud system, Coverline roof- and wall-cladding tra­
peziodal profiles (LTP45, LVP20), Rainline rainwater
system, flashings
Building: Angyalföldi­
Láng sporthall
extension
Location: Budapest XIII. ker.
/ HUNGARY
Construction year: 2010
Hall size: 20,4x46,2m
(~950m2)
Lindab products: LTP150 loadbearing trapezoid
profiles (Coverline
productgroup)
References
Building: Gym hall of elementary school
Location: Leányfalu (Pest megye / HUNGARY)
Construction year: 2010
Hall size: ~550m2
Lindab products: Construline purlin system, Coverline roof
cladding trapezoid profile (LTP45), Rainline rainwater system, Protectline
roof safety system (pipe snow guard), flashing
Building: Gym hall of elementary school
Location: Nagyharsány (Baranya megye / HUNGARY)
Construction year: 1994
Hall size: ~800m2
Lindab products: Construline purlin- and wall-stud system, Topline tile
effect roof cladding, Coverline external and internal wall cladding trapezoid
profiles (LVP20), Rainline rainwater system, flashings
Building: Gym hall of elementary
school, flat roof
reconstruction
Location: Nagykovácsi (Pest megye /
HUNGARY)
Construction year: 2011
Hall size: 15x30m (~450m2)
Lindab products: Coverline roof cladding
trapezoid profile (LTP45), Rainline rainwater system,
Protectline roof safety system (pipe snow guard),
flashings
Building: Friends Arena
(the stadium of AIK Stockholm club and
Swedish national football team)
Location: Stockholm (Sweden)
Construction year: 2009-2011
Hall size: 68x105m courtsize
(7140m2), 50.000 seating
capacity
Lindab products: Lindab high profile load-
bearing trapezoid sheets
(~22.000m2), ­
special stainless self-drilling
screws (~400.000pcs),
Lindab Ventilation system
(~17.000m total length)
Sporthall Vara, Sweden
Floor area: 2 500 m2
Lindab products:
Lindab trapezoid sheets
References
Building: Icerink hall, Sweden
Floor area: 2 500 m2
Lindab products used: Lindab trapezoid sheets
Building: Cluj Arena
(The stadium of the Romanian
footbal club, FC Universitatea
Cluj)
Location: Cluj, Romania
Construction year: 2009-2011
Hall size: 68x105m courtsize
(7140m2), ~30.500 seating
capacity
Lindab products: Special sheet
metal roof and wall cladding.
Special multicoloured, opaled
coating; unique, dual curvature
standing seam roof cladding
(~20.000m2) and wall cladding
(~2000m2); perforated facade wall
cassettes (~5000m2)
Building: Lindab Arena (Ice-hall)
Ängelholm, Sweden
Size: 3.000 seating capacity sports hall
Lindab products used: Lindab trapezoid sheets
Technical aspects and parameters
The directives of the European Union concerning the construction industry set out the basic
requirements for buildings. According to these aspects, we sum up here the options offered by
Lindab’s product groups.
“Mechanical resistance and stability” – the design and construction of framing structures of compliant
load-bearing capacity on the long run are ensured by the use of high-strength steel materials and optimized
dimensions, as well as our self-developed structural dimensioning tools (charts, softwares).
“Safety in case of fire” – There are a number of laboratory tests, standard calculations and qualifications
available as regards the fire-protection classes and performance parameters (fire-resistance limit values) under
applicable European standards (EN) of Lindab products and systems. By the help of these tools, the required
framing solutions or sheeting systems can always be specified for the requested fire safety level.
“Hygiene, health and the environment” – The materials of Lindab light gauge steel products, throughout
their entire life span, do not contain components, which are harmful to human health or the environment. A mention must be made here that the steel raw material is recyclable, and the minimum quantities of wastes produced
in the manufacture and construction works phase does not impose a burden to the environment.
“Safety of use” – In connection with this aspect it is worth mentioning that the durability of Lindab steel products is ensured by a multi-layer coating system applied over a hot-dip galvanized surface that ensures corrosion
protection.
“Protection against noise” – Two major areas should be distinguished in terms of acoustics: sound inhibition
and sound absorption. For “sound inhibition” (where the task of the surface structural element in question is to
ensure that the lowest possible part of a sound effect generated at one side should be detected at the other side),
various Lindab assembled roof- and wall-cladding systems and pre-fabricated sandwich panels are available,
with various test results, on the basis of which the required solution can be selected. Where “sound absorption”
is prescribed (where the impact of a noise source located at one – generally the inner – side of the surface
structure must be reduced for such „receivers” who are located at the same side of the surface structure in
question), the application of perforated wall cladding sheets (pierced densely by small-size holes) offers an
excellent solution.
“Energy economy and heat retention” – For buildings, on of the most important points of view today is the
amount of energy they require for the purpose of use (heating and/or cooling, ventilation or other technologies), as
this factor has a significant impact on operation costs. From among all the building structures, the thermal insulation
capabilities of roof- and wall-claddings are the decisive parameters. The roof- and wall-cladding systems offered by
Lindab provide a very wide choice also in terms of thermal insulation levels; the lightweight, thermal-insulated solutions are capable of meeting needs from a slightly tempered one to even a passive-building-level performance, with
small spacings between the various solutions. The thermal insulation capability of building elements must always be
specified individually, in a circumspect manner, based on relevant needs and prescriptions.
“Sustainable use of natural resources” – From this point of view it is important to emphasize that Lindab’s
roofing systems (producing especially large areas in case of halls for instance) allow for an excellent opportunity
for the use of the various solar systems being on the market (solar collectors for hot water or heating, or electricity
generating solar cells). In the case of each different Lindab roof-cladding system (trapezoidal profiles, tile-effect
roof sheets, sandwich panels or standing seam roof sheets), pre-engineered accessory system components
are available for accommodating and fastening solar components on the roof safely (through load-bearing and
watertight connections).
Product identification and certificates of conformity
As the realization process in the construction industry involves a number of players in most cases (design, production, sales, installation/
construction works, general contracting, and organisation), it is of major importance to ensure the identification of makes and products,
and the control of their technical conformity in every phase of a project. Identification of products at the building site is not always
easy. For this end, the products manufactured by Lindab are marked by a videojet marking (product type, profile, serial number, date
of production, etc.); while certain components are stamped in a raised print by the „Lindab” brand name (e.g. the joining ends of gutters),
promoting a clear identification of Lindab products. Product identification is important also to ensure the assignment of products to quality
documentations whose release is mandatory by law (ÉME, TMI, CE-mark, Declaration of Conformity).
Contact, quotations, information
In specific questions related to hall systems, framing or sheeting elements, Lindab Kft.’s people are pleased to be available to your valued inquiry
throughout the design, preparation, tendering (consignation, quotation-preparation) and the construction works phases.
Please ask for our free professional consultation, and please do not hesitate to contact us with your special inquiries!
Design consultant
Molnár István
06 30 257-6087
[email protected]
Engineering, structural and fire-safety questions
Kotormán István
06 30 350-1989
[email protected]
Sales, quotation
Erőss Zoltán
06 30 977-1182
[email protected]
On-site project coordination, professional consultation and plans, design issues
Budapest,
Pest megye
Veszprém, Vas, Fejér and
Győr-M-S and Komárom-Esztergom
Jász-Nagykun-Szolnok,
Hajdú-Bihar and Békés megye
Polgár Dávid
06 30 248-2391
[email protected]
Móricz Gábor
06 30 708-6462
[email protected]
Kulcsár Viktor
06 30 433-2064
[email protected]
Csongrád, southern part of Pest
megye and Bács-Kiskun megye
Zala and Somogy, Tolna
and Baranya megye
Nógrád, Heves, Borsod-A-Z and
Szabolcs-Szatmár-Bereg megye
Kelemen Kornél
06 30 708-6463
[email protected]
Devecz Tamás
06 30 433-1603
[email protected]
Fülep Attila
06 30 433-1795
[email protected]
fehér alapra
Lindab Profil
Biatorbágy, Állomás u. 1/A.
színes2051
alapra
Tel.: +36-23-531-300, Fax: +36-23-531-141
www.lindab.hu/csarnok
www.lindab.hu