Toluene free and non-solvent The food and cigarette packages have already been widely applied by the traditional UV techniques. But they still has defection compared to new UV technique. For example, the solvent will always be harmful to human. Anyhow, considering the health awareness has arisen among public nowadays. DBC have constantly devote ourselves to new UV technique, and develop toluene free and solvent free oligomers and monomers. They are safer for human and do not produce smell and hazardous substances. The following are our new developed products: Grade Toluene free Nonsolvent Property Status Remark DM GPTA-A ◎ *Low skin irritation *Good hardness and flexibility balance *Fast curing speed Lab Replace GPTA OTA-480 without solvent DM PET5EOTA-A ◎ 3,4 functional monomer with high curing speed and balance of flexibility. Low skin irritation. Commercialized Could replace TMPTA TMP3EOTA PETA DM TMP3EOTA-A ◎ 3 functional monomer with high curing speed and balance of flexibility. Low skin irritation. Lab Replace TMP3EOTA Without solvent Grade Toluene free Nonsolvent Property Status Remark Commercialized Replace most of 6 functional urethane acrylate DPHA without solvent content DM 89A ◎ 6 functional urethane acrylate without irritated monomer of PETA. *Hardness : 4H *Good flexibility *Low shrinkage DM 127/100 ◎ 2 functional Commercialized standard Bisphenol A epoxy acrylate General application DM 1283C/100 ◎ Modified epoxy acrylate low viscosity ,excellent pigment dispersion property *Better flexibility compared to DM 127 series Use in most ink application especially for screen flexo ink Pilot Grade Toluene free Nonsolvent Property Status DM 02C ◎ Monofunction acrylate *Good adhesion *Good flexibility Commercialized DM 186 ◎ Epoxidised soya bean oil acrylate *Good pigment wetting and flow Commercialized DM 260 ◎ Water reducible (20~30%) polyester diacrylate *Good flexibility *Hardness : 2H Pilot Remark Grade Toluene Nonfree solvent Property Status DM 1288 ◎ Modified epoxy acrylate *low viscosity *excellent pigment dispersion property Pilot DM 188A (Part 1) (Part 2) ◎ Modified 8 functional urethane acrylate diluted with PET5EOTA-A *Fast curing speed *High hardness(>9H) Lab Remark With balance of economic and high curing speed could replace DPHA in most ink application Grade Toluene Nonfree solvent Property Status DM 5212 ◎ Aliphatic urethane acrylate *Excellent flexibility *Non-yellowing Lab DM 583 ◎ 3 functional Aliphatic urethane acrylate Mobil phone coating *Excellent abrasion and stain resistance Lab DM 541A ◎ 2 functional polyeater polyol based Lab aliphatic urethane acrylate *Good adhesion *Good flexibility Remark Grade Toluene Nonfree solvent Property Status DM 120 ◎ Monofunction monomer with good curing speed. Low odor and viscosity Good flexibility Commercialized DM 5191 ◎ Aliphatic urethane acrylate *Good hardness *Excellent water resistance Pilot DM 353M ◎ Polyester resin *Good adhesive Commercialized Remark Grade Toluene Nonfree solvent Property Status DM 266 ◎ Polyester diacrylate *Good flexibility Pilot DM270 ◎ Methacrylated , carboxylic acid terminated *Good adhesion for metal and glass Commercialized DM 275 ◎ Acrylated , carboxylic acid terminated *Good adhesion for metal and glass *Soft Lab Remark Grade Toluene Nonfree solvent DM 127PE520 DM 176TF (Part 1) (Part 2) DM 276 (Part 1) (Part 2) ◎ ◎ ◎ Property Status Remark Epoxy acrylate dilute with non-solvent 3,4 function monomer Commercialized Used in ink, coating application with improved wetting property *Good adhesion on most plastic substrate *Fast curing speed *Good pigment wetting *Good hardness Commercialized *Flexible-rubber like monofunction oligomer with high curing speed *Soft *Excellent adhesion for plastic 、metal and glass Commercialized Good adhesion on metal/plastic Grade Toluene free Nonsolvent Property Status Remark DM 278 ◎ Chlorinated polyester Commercialized acrylate *Good adhesion for PP、PE Designed for plastic and untreated PET application DM 279 ◎ Mono-functionality polyester acrylate *Excellent adhesion for PET Commercialized Designed for plastic and untreated PET application Modified 6 functional urethane acrylate diluted with toluene-free TMPTA *Good curing speed *Excellent hardness Commercialized With balance of economic and high curing speed , lower shrinkage could replace DPHA in most ink application DM 188TF (Part 1) (Part 2) ◎ DOUBLEMER® 120 General DOUBLEMER® 120 is a 100% nonvolatile, epoxy acrylate resin. It provides solvent resistance, high gloss, improved flexibility and good adhesion, such as overprint varnishes, inks etc. DOUBLEMER® 120 is solvent free. Properties Chemical Name CAS No. EINECS No. Epoxy acrylate Proprietary Proprietary Physical data Appearance Color, Gardner Viscosity, cps, 25˚C Acid Value, (mg KOH/g) Functionality Clear Liquid 2.0 max. 150~200 1.0 max. 1 Packaging 200 kg /iron drum Application DOUBLEMER® 120 has characteristics of light color, low shrinkage, good adhesion and good flexibility. DOUBLEMER® 120 can be used in overprinting varnishes, coating for paper & plastics, lithographic & screen ink vehicles and metal decorating vehicles DOUBLEMER® PET5EOTA-A General DOUBLEMER® PET5EOTA-A is a high boiling monomeric liquid and has relative low viscosity. DOUBLEMER® PET5EOTA-A is a reactive tetrafunctional monomer and a highly reactive crosslinking agent which is polymerized readily by common free radical initiators. DOUBLEMER® PET5EOTA-A is solvent free. Properties Chemical Name CAS No. Ethoxylated Pentaerythritol Tetraacrylate 51728-26-8 Physical data Appearance Odor Color (APHA) Acid value, mg KOH/g Specific gravity, 25˚C Viscosity, cps 25˚C Moisture, % Inhibitor (MEHQ), ppm OH value Residual Solvent, % Clear liquid Low odor <60 <10 1.14-1.16 300-600 <0.5 100-300 80-110 1.0 max. Packaging 200 kg/ iron drum Application Coatings for metal, optical, PVC floor, wood and paper. Electronics for solder masks Inks for flexo, gravure, offset and screen DOUBLEMER® TMP3EOTA-A General DOUBLEMER® TMP3EOTA-A is a highly reactive trifunctional acrylated ester and a highly reactive trifunctional crosslinking agent which is polymerized readily by common free radical initiators. DOUBLEMER® TMP3EOTA-A is solvent free. Properties Chemical Name CAS No. Ethoxylated Trimethylolpropane Triacrylate 28961-43-5 Physical data Appearance Color (APHA) Acid value, mg KOH/g Viscosity, cps 25˚C Moisture, % Refractive Index 25˚C Clear liquid 100 max. 10 max. approx.100 0.15 max. 1.4670~1.4770 Packaging 200 kg /iron drum Application DOUBLEMER® TMP3EOTA-A is a good diluent for urethane, polyester, acrylate and epoxy oligomer coating system. It is particularly well suited to formulation of UV-reactive wood, inks, overprint varnishes, and paper coatings. DOUBLEMER® 89A General DOUBLEMER® 89A is a hexa(6)-functional aliphatic urethane acrylate oligomer. It is cured via exposure to ultraviolet light and electron beam. DOUBLEMER® 89A is designed for thin film on plastic or paper applications. DOUBLEMER® 89A is solvent free. Performance Good elasticity and flexibility Good abrasion resistance Good Resistance to Yellowing Good solvent resistance Specifications Viscosity Color Molecular weight Functionality Packaging 200 kg/ iron drum Application 1. Over print varnish for paper & board 2. Coatings for Plastics. 3. UV inks. approx.20000(mPa.s @ 25°C) 3 max. (gardner) 1000 6 DOUBLEMER® 127/100 General DOUBLEMER® 127/100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. DOUBLEMER® 127/100 is solvent free. Physical Properties Density, g/cm3 Functionality, theoretical Polymer solids, % by weight Molecular weight, theoretical Physical data Viscosity at 60°C, cps Color, Gardner Acid value, mg KOH/g % epoxide Packaging 200 kg /iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 127/100 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. DOUBLEMER® 127/100 is recommended for use in: ˙Clear coatings for paper, paper board, wood, chipboard and rigid plastics ˙Overprint varnishes ˙Lithographic and screen ink ˙Wood sealers ˙Paper upgrading ˙Laminating adhesives ˙Fast cure coatings 1.16 2 100 600 5,200 ± 1,000 1 max. 1 max. 0.27 DOUBLEMER® 1283C/100 General DOUBLEMER® 1283C/100 is a dispersion agent modified bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss, good dispersion and good flexibility after coating. It is used in various UV/EB applications such as inks, coatings and overprinting varnishes. DOUBLEMER® 1283C/100 is solvent free. Physical Properties Functionality, theoretical Polymer solids, % by weight Molecular weight, theoretical Specifications Appearance Viscosity at 25°C, cps Color, Gardner Acid value, mg KOH/g Packaging 200 kg/ iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 1283C/100 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. DOUBLEMER® 1283C/100 is recommended for use in: ˙Clear coatings for paper, paper board, wood, chipboard and rigid plastics ˙Overprint varnishes ˙Lithographic and screen ink ˙Wood sealers ˙Paper upgrading ˙Laminating adhesives ˙Fast cure coatings 2 100 750 Clear yellowish liquid approx.6000 3 max. 5 max. DOUBLEMER® 02C Properties 2-Oxepanone, homopolymer, 2-((1-oxo-2-propenyl)oxy)ethyl ester *DOUBLEMER® 02C is solvent free. Physical data Appearance Color (APHA) Acid value, mg KOH/g OH value, mg KOH/g Viscosity, cps 25°C Melting point, °C Inhibitor (MEHQ), ppm Packaging 200 kg/ iron drum colorless to light yellow liquid 150 max. 5.0 max. approx.160 60 – 90 -12°C 500 DOUBLEMER® 186 General DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, leveling and adhesion. DOUBLEMER® 186 is solvent free. Physical Properties Density, g/cm3 Functionality, theoretical Polymer solids, % by weight Molecular weight, theoretical Specifications Viscosity at 25°C, cps Color, Gardner Acid value, mg KOH/g % epoxide Packaging 200 kg /iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 186 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. DOUBLEMER® 186 is recommended for use in: ˙Clear coatings for paper ˙Ink binder with good wetting property ˙Overprint varnishes ˙Wood top coat with smooth surface ˙Adhesive 1.13 3 >95 1,200 13000-35000 10 max. 15 max. 0.27 max. DOUBLEMER® 260 General DOUBLEMER® 260 is a polyester diacrylate oligomer dissolved in water. It can significantly enhance the flexibility and coating adhesion to certain ‘difficult-to-coat’ substrates, such as fabric, wood, paper, and plastics. It is designed for universal applications. DOUBLEMER® 260 is solvent free. Physical Properties Polymer solids, % by weight Hardness Specifications Appearance Viscosity at 25°C, cps Color, gardner Acid value, mg KOH/g Packaging 200 kg/ iron drum Application Substrates: Wood, paper, OPV, Plastic ˙Water based applications --- Solubility in water 30℃ (% weight): 60 % ˙Coatings, lithographic and screen inks. 100 % 2H yellowish liquid approx. 30000 3 max. 5 max. DOUBLEMER® 1288 General DOUBLEMER® 1288 is a dispersion agent modified bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss, good dispersion and good flexibility after coating. It is used in various UV/EB applications such as inks, coatings and overprinting varnishes. DOUBLEMER® 1288 is solvent free. Properties Functionality, theoretical Polymer solids, % by weight Molecular weight, theoretical Physical data Appearance Viscosity at 25°C, cps Color, Gardner Acid value, mg KOH/g Packaging --- Application Formulated UV/EB curable products containing DOUBLEMER® 1288 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. DOUBLEMER® 1288 is recommended for use in: ˙Clear coatings for paper, paper board, wood, chipboard and rigid plastics ˙Overprint varnishes ˙ Lithographic and screen ink ˙Wood sealers ˙Paper upgrading ˙Laminating adhesives ˙Fast cure coatings 2 100 1500 Clear yellowish liquid ------- DOUBLEMER® 188A (Part 1) General DOUBLEMER® 188A is a high functional aromatic urethane acrylate oligomer diluted with PET5EOTA-A. DOUBLEMER® 188A provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB), Cured films of DOUBLEMER®188A exhibit excellent hardness and solvent resistance. DOUBLEMER®188A is solvent free. Performance UV/EB cured products based on DOUBLEMER® 188A are characterized by the following performance properties: Outstanding hardness and scratch resistance (Pencil Hardness can be reached higher than 6H) Excellent solvent resistance High gloss The actual properties of UV/EB cured products also depend on the selection of the other formulation components such as reactive diluents, additives, and photoinitiators. DOUBLEMER® 188A (Part 2) Specifications Appearance Viscosity Color Molecular weight Acid value Clear liquid approx.80000 (mPa.s @ 25°C) 2 max. (gardner) 2000 5 max. (mg KOH/g) Packaging 20kgs/ plastic drum Application Formulated UV/EB curable products containing DOUBLEMER® 188A may be applied via lithographic, screen, gravure, direct of reverse roll, and curtain coating methods. DOUBLEMER® 188A is recommended for use in: 1.Lithographic inks. 2. Improving cure speed, solvent resistance, and gloss. 3. Scratch resistant coating on plastic. 4. Photo-imaginable soldier mask. DOUBLEMER® 5212 General DOUBLEMER® 5212 is a type of UV curing oligomer used for the purpose of offering good toughness and flexibility. DOUBLEMER® 5212 is solvent free. Performance Highlights DOUBLEMER® 5212 is characterized by: ˙Non yellowing ˙High curing speed ˙Low viscosity ˙Good toughness ˙Good hydrolysis resistance Specifications Appearance Color, Gardner Viscosity at 25°C, cps Packaging 20kgs net/PE drum Application Formulated UV/EB curable products containing DOUBLEMER® 5212 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. Clear liquid 2 max. approx. 10000 DOUBLEMER® 5212 is recommended for use in: ˙ink coatings ˙Varnishes DOUBLEMER® 583 General DOUBLEMER® 583 is a aliphatic urethane tri-acrylate oligomer which cured via exposure to ultraviolet light (UV) or electron beam (EB) are nonyellowing, good abrasion resistance, good toughness and good stain resistance. DOUBLEMER® 583 is solvent free. Physical data Appearance Color, Garden Viscosity Packaging 200 kg /iron drum Application DOUBLEMER® 583 has characteristics of good impact strength, the speed of drying is fast, and Non-yellowing. DOUBLEMER® 583 has a good adhesion for PET and TAC. DOUBLEMER® 583 can be used in metal, Plastics and wood coatings. Clear Liquid <1 300000 cps DOUBLEMER® 541A General DOUBLEMER® 541A is an aliphatic urethane acrylate oligomerdiluted with 20% TMP3EOTA-A, characterized by its good abrasion resistance and good adhesion. The excellent non-yellowing property is similar to a typical aliphatic urethane resin. DOUBLEMER® 541A is solvent free. Performance Highlights DOUBLEMER® 541A is characterized by: ˙good elasticity & flexibility ˙good abrasion resistance ˙good adhesion ˙Good weather ability performance ˙Fast cure rates ˙High chemical resistance Specifications Viscosity at 25°C, cps Color, Gardner Acid value, mg KOH/g Packaging 200kgs net/ iron drum Application DOUBLEMER® 541A is recommended for use in: ˙Overprinting varnishes for paper & board ˙Coatings for wood and plastics requiring exterior durability ˙UV. inks ˙UV. Cured adhesives 30,000 - 50,000 1 max. 5 max. DOUBLEMER® GPTA-A General DOUBLEMER® GPTA –A is an acrylated trifunctional monomer based on glycerol derivative, with low viscosity and low toxicity. DOUBLEMER® GPTA-A is solvent free. Properties Chemical Name CAS No. z Low skin irritation z Fast cure rates z Good hardness z Good flexibility z Low shrinkage Glycerylpropoxy Triacrylate 52408-84-1 Physical data Appearance Color (Gardner) Acid value, mg KOH/g Specific gravity, 25˚C Viscosity, cps 25˚C Moisture, % Inhibitor (MEHQ), ppm Clear liquid approx.100 10 max. 1.08-1.11 70-100 0.1 max. 200-500 Application DOUBLEMER® GPTA-A is a new generation reactive diluent with a low skin irritation index mostly used to adjust the properties of radiation curing compositions. DOUBLEMER® 5191 General DOUBLEMER® 5191 is a bi-functional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER® 5191 exhibit excellent property anti-hydrolysis properties and good adhesion on plastic, metal substrates. DOUBLEMER® 5191 is solvent free. Physical Properties Functionality, theoretical 2 Polymer solids, % by weight 100 Specifications Viscosity at 25°C, cps Color, Gardner Packaging 200kgs net/iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 5191 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. approx. 220,000 5 max. DOUBLEMER® 5191 is recommended for use in: ˙Substrates requiring good anti-hydrolysis ˙Lithographic and screen ink ˙Plastic varnish DOUBLEMER® 353M General DOUBLEMER 353M is an acrylic oligomer designed as an adhesive for difficult substrates. Properties DOUBLEMER 353M is characterized by: ˙Light color ˙Moderate viscosity Physical data Appearance Viscosity(cps@25°C) Color, Gardner Acid value (mg KOH/g) Packaging 200kgs net/steel drum Application DOUBLEMER 353M is recommended for use as adhesive in between: ˙Glass to glass ˙PMMA to PMMA ˙PC to PC ˙Glass to Metal Clear viscous liquid 75,000 ~ 85,000 1 max. 5 max DOUBLEMER® 266 General DOUBLEMER® 266 is a polyester diacrylate oligomer which can significantly enhance coating adhesion to nylon substrate and has excellent flexibility. DOUBLEMER® 266 is solvent free. Physical Properties Polymer solids, % by weight 100 % Hardness 1H Specifications Appearance Viscosity at 25°C, cps Color, gardner Acid value, mg KOH/g Packaging 200kgs net/iron drum Performance Highlights DOUBLEMER® 266 is characterized by: ˙Low shrinkage ˙Good adhesion ˙Excellent flexibility The actual properties of UV/EB cured products also depend on the selection of the other formulation components such as reactive diluents, additives and photo initiators. yellowish liquid approx. 30000 5 max. 5 max. DOUBLEMER® 270 General DOUBLEMER® 270 is a carboxylated polyester methacrylate oligomer It is specially designed for use as an alkali-strippable etch resist component for electronic printed circuit boards and may be cured by ultraviolet light (UV) or electron beam (EB). DOUBLEMER® 270 is solvent free. Physical Properties Density, g/cm3 1.06 Polymer solids, % by weight 100 Specifications Viscosity at 25°C, cps Color, gardner Acid value, mg KOH/g Packaging 200kgs net/iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 270 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. DOUBLEMER® 270 is recommended for use in: ˙Etch resist varnishes ˙Metal and glass adhesion promoter 1000-5000 2 max. 200 ~ 250 DOUBLEMER® 275 General DOUBLEMER® 275 is a carboxylated polyester acrylate oligomer designed for plastic and metal substrates. It can be cured by ultraviolet light (UV) or electron beam (EB). DOUBLEMER® 275 is solvent free. Physical Properties Polymer solids, % by weight 100 Specifications Color, gardner Acid value, mg KOH/g Packaging 200kgs net/iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 275 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. 2 max. 200 max. DOUBLEMER® 275 is recommended for use in: ˙Plastic substrates ˙PET substrate DOUBLEMER® 127PE520 General DOUBLEMER® 127PE20 is a standard bisphenol A epoxy diacrylate oligomer diluted with 20% PET5EOTA-A. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. DOUBLEMER® 127PE20 is solvent free. Properties Density, g/cm3 Functionality, theoretical Polymer solids, % by weight Molecular weight, theoretical Physical data Viscosity at 25°C, cps Color, Gardner Acid value, mg KOH/g Packaging 200 kg iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 127PE20 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. DOUBLEMER® 127PE20 is recommended for use in: ˙Clear coatings for paper, paper board, wood, chipboard and rigid plastics ˙Overprint varnishes ˙Lithographic and screen ink ˙Wood sealers ˙Paper 1.16 2 100 600 APP. 80000 1 max. 5 max. DOUBLEMER® 176TF (Part 1) General DOUBLEMER® 176-TF is a novel bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, good dispersion and smooth touch after coating. It is designed to offer good adhesion for plastic and difficult substrates, such as PET, PE, PP. DOUBLEMER® 176-TF is toluene free. Performance Highlights UV/EB cured products containing DOUBLEMER® 176-TF are characterized by the following performance properties: ˙Good adhesion ˙Fast curing speed ˙Excellent chemical heat resistance ˙High gloss and smooth touch ˙Good flexibility ˙Excellent chemical resistance The final properties of UV/EB cured products also depend on the selection of the other formulation components such as reactive diluents, additives and photo initiators. DOUBLEMER® 176TF (Part 2) Specifications Appearance Viscosity at 25°C, cps Acid value, mg KOH/g liquid, transparent red-wine like color 180,000 ~ 250,000 5 max. Packaging 200kgs net/iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 176-TF may be applied via lithographic, screen, direct or reverse roll and curtain coating methods. DOUBLEMER® 176-TF is recommended for use in: ˙Ink ˙adhesive for plastics ˙varnishes ˙PE, PP, PET ˙wood coating ˙Fast cure coatings DOUBLEMER® 276 (Part 1) General DOUBLEMER® 276, is a polyester methacrylate oligomer, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, glass, paper, and plastics. It is designed for universal applications. DOUBLEMER® 276 is solvent free. Performance Highlights DOUBLEMER® 276 is characterized by: ˙Low odor ˙Acid functionality ˙Low shrinkage ˙Excellent adhesion UV/EB cured products containing DOUBLEMER® 276 are characterized by the following performance properties: ˙Alkaline strippable ˙Good adhesion to glass and metallic materials The actual properties of UV/EB cured products also depend on the selection of the other formulation components such as reactive diluents, additives and photo initiators. DOUBLEMER® 276 (Part 2) Specifications Viscosity at 25°C, cps Color, gardner Acid value, mg KOH/g 30,000 ~ 60,000 3 max. 70 ~ 100 Packaging 200kgs net/iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 276 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. DOUBLEMER® 276 is recommended for use in: ˙Etch resist varnishes ˙Metal and glass adhesion promoter ˙PE/PP etc plastic application DOUBLEMER® 278 General DOUBLEMER® 278 is a polyester acrylate oligomer which improves adhesion to difficult substrates, such as PP, PE, PET. It is designed for universal applications. DOUBLEMER® 278 is solvent free. Performance Highlights DOUBLEMER® 278 is characterized by: ˙Acid functionality ˙Low shrinkage ˙Excellent adhesion The actual properties of UV/EB cured products also depend on the selection of the other formulation components such as reactive diluents, additives and photo initiators. Specifications Appearance Viscosity at 60°C, cps Color, gardner Acid value, mg KOH/g Packaging 200kgs net/iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 278 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. DOUBLEMER® 278 is recommended for use in: ˙PP/PE/PET etc plastic application ˙Metal and glass adhesion promoter light yellowish liquid approx. 46,000 3 max. 70~80 DOUBLEMER® 279 General DOUBLEMER® 279 is a carboxylated polyester methacrylate oligomer designed for plastic substrates, and offers good adhesion for PET substrate. It can be cured by ultraviolet light (UV) or electron beam (EB).It tends to slightly crystallize, but upon heating (60°C, 2hours), it will totally liquefy. DOUBLEMER® 279 is solvent free. Physical Properties Polymer solids, % by weight 100 Specifications Viscosity at 25°C, cps Color, gardner Acid value, mg KOH/g Packaging 200kgs net/iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 279 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. DOUBLEMER® 279 is recommended for use in: ˙Plastic substrates ˙PET substrate approx. 6000 2 max. approx. 200 DOUBLEMER® 188-TF (Part 1) General DOUBLEMER® 188-TF is a high functional aromatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER®188-TF exhibit excellent hardness and solvent resistance. DOUBLEMER® 188-TF is toluene free. Performance UV/EB cured products based on DOUBLEMER® 188-TF is characterized by the following performance properties: *Outstanding hardness and scratch resistance (Pencil Hardness can be reached higher than 6H) *Excellent solvent resistance *High gloss *The actual properties of UV/EB cured products also depend on the selection of the other formulation components such as reactive diluents, additives, and photoinitiators. DOUBLEMER® 188-TF (Part 2) Specifications Appearance Viscosity Color Molecular weight Acid value Clear liquid approx.20000 (mPa.s @ 25°C) 2 max. (Gardner) approx.1500 6 max. (mg KOH/g) Packaging 200kgs iron drum Application Formulated UV/EB curable products containing DOUBLEMER® 188-TF may be applied via lithographic, screen, gravure, direct of reverse roll, and curtain coating methods. DOUBLEMER® 188-TF is recommended for use in: 1. Lithographic inks. 2. Improving cure speed, solvent resistance, and gloss. 3. Scratch resistant coating on plastic. 4. Photo-imaginable soldier mask.
© Copyright 2024 Paperzz