FINISH SCHEDULE
CALLOUT
EB-2
MEL-1
P-1
PC-1
PL-1
PL-2
DESCRIPTION
EDGEBAND, 0.020 PVC TO MATCH ARCLIN GLACIER WHITE
7696 GLOSS
MELAMINE, ARCLIN GLACIER WHITE 7696 GLOSS
PAINT, TO MATCH RAL 9003 SIGNAL WHITE GLOSS
POWDER COAT, RAL 9003 SIGNAL WHITE GLOSS
PLAM, DESIGNER WHITE, WILSONART D354-60
PLAM, DESIGNER WHITE COLOR CORE WILSONART D354.01
GLOSS
GLOBAL HEADQUARTERS
3451 Rider Trail South
St. Louis, MO 63045
T 314.739.4120
www.idxcorporation.com
CONFIDENTIAL:
This drawing and the information herein are the
exclusive property of idX Corporation. Any
reproduction or use without express written consent
is strictly forbidden.
CA TITLE 17:
All composite wood products (MDF, PB, HWPW) are
compliant. Place compliance label as shown within
drawing (or per current standard) and do not
remove after installation.
DIMENSIONS:
All dimensions are in inches unless noted other
wise - views are not to scale unless noted.
THIRD ANGLE PROJECTION
TOLERANCE
UNLESS OTHERWISE NOTED
X.XXX 0.031 in [X.X 0.8 mm]
X.XX 0.06 in [X.X 1.5 mm]
X.X 0.01 in [X.X 2.5 mm]
ANGLES 1
FRACTIONAL 1/32 in
DRAWN BY:
TROY WHITAKER
DATE:
11/17/2012
3 SWIVEL CASTERS
W/O BRAKE
PL-1
CUSTOMER:
JC PENNEY
PROJECT:
GENERIC HOME
PL-2
PL-2
CUSTOMER REF No:
MEL-1
DESCRIPTION:
HO-102 5FT RUNWAY CUBBY
WITH 3 SHELVES
LEGACY - VANTAGE No:
PC-1
REV No:
ITEM No:
112584
DOCUMENT No:
A0004007.dwg
SHEET:
1
AS400 No:
PL-1
OF
4
60
[60]
FINISHED TOP
PLAM EDGES,
COLOR CORE
GLOBAL HEADQUARTERS
C
C
3451 Rider Trail South
St. Louis, MO 63045
T 314.739.4120
www.idxcorporation.com
3
[3]
CONFIDENTIAL:
This drawing and the information herein are the
exclusive property of idX Corporation. Any
reproduction or use without express written consent
is strictly forbidden.
0.125
[1/8]
PREBOND PLAM
TOP
36
[36]
FINISHED TOP
CA TITLE 17:
All composite wood products (MDF, PB, HWPW) are
compliant. Place compliance label as shown within
drawing (or per current standard) and do not
remove after installation.
DIMENSIONS:
All dimensions are in inches unless noted other
wise - views are not to scale unless noted.
THIRD ANGLE PROJECTION
0.125
[1/8]
3
[3]
DETAIL 1
SCALE 1 / 2
TOP VIEW
SCALE 1/12
TOLERANCE
UNLESS OTHERWISE NOTED
X.XXX 0.031 in [X.X 0.8 mm]
X.XX 0.06 in [X.X 1.5 mm]
X.X 0.01 in [X.X 2.5 mm]
ANGLES 1
FRACTIONAL 1/32 in
DRAWN BY:
TROY WHITAKER
60
[60]
1/8" X 1/8" QUIRK
PTM
3
[3]
PLAM EDGES,
COLOR CORE
1/8" X 1/8" QUIRK
PTM
B
36
[36]
1/8" X 1/8" QUIRK
PTM
DATE:
11/17/2012
3
[3]
CUSTOMER:
JC PENNEY
1
A
PROJECT:
GENERIC HOME
A
CUSTOMER REF No:
PREBOND PLAM
EXTERIOR END
3
[3]
35
[35]
42
[42]
DESCRIPTION:
HO-102 5FT RUNWAY CUBBY
WITH 3 SHELVES
3
[3]
REV No:
4
[4]
1/8" X 1/8" QUIRK
PTM
B
FRONT VIEW
SCALE 1/12
METAL BASE,
POWDERCOATED
1/8" X 1/8" QUIRK
PTM
END
SCALE 1/12
1/8" X 1/8" QUIRK
PTM
4
[4]
ITEM No:
112584
DOCUMENT No:
A0004007.dwg
SHEET:
2
AS400 No:
35
[35]
CLR
LEGACY - VANTAGE No:
42
[42]
53.875
[53 7/8]
SHELVES
OF
4
GLOBAL HEADQUARTERS
3451 Rider Trail South
St. Louis, MO 63045
T 314.739.4120
www.idxcorporation.com
CONFIDENTIAL:
This drawing and the information herein are the
exclusive property of idX Corporation. Any
reproduction or use without express written consent
is strictly forbidden.
60
[60]
54
[54]
CLR
3
[3]
CA TITLE 17:
All composite wood products (MDF, PB, HWPW) are
compliant. Place compliance label as shown within
drawing (or per current standard) and do not
remove after installation.
3
[3]
DIMENSIONS:
All dimensions are in inches unless noted other
wise - views are not to scale unless noted.
THIRD ANGLE PROJECTION
METAL EDGE STIFFENER,
BOTH LONG SHELF EDGES
PLAM EDGES @
BOTH EDGES OF ENDS,
COLOR CORE
TOLERANCE
UNLESS OTHERWISE NOTED
X.XXX 0.031 in [X.X 0.8 mm]
X.XX 0.06 in [X.X 1.5 mm]
X.X 0.01 in [X.X 2.5 mm]
ANGLES 1
FRACTIONAL 1/32 in
17.625
[17 5/8]
CLR
17.563
[17 9/16]
SHELVES
MELAMINE INTERIOR
END
DRAWN BY:
TROY WHITAKER
DATE:
11/17/2012
0.75
[3/4]
36
[36]
CUSTOMER:
JC PENNEY
PROJECT:
GENERIC HOME
MELAMINE BACK
PARTITION
METAL EDGE STIFFENER,
BOTH LONG SHELF EDGES
SECTION A-A
SCALE 1/8
DESCRIPTION:
HO-102 5FT RUNWAY CUBBY
WITH 3 SHELVES
REV No:
ITEM No:
112584
DOCUMENT No:
A0004007.dwg
SHEET:
3
AS400 No:
CUSTOMER REF No:
LEGACY - VANTAGE No:
17.625
[17 5/8]
CLR
MELAMINE INTERIOR
END
OF
4
1
PLAM EDGES,
COLOR CORE
PLAM TOP
GLOBAL HEADQUARTERS
3451 Rider Trail South
St. Louis, MO 63045
T 314.739.4120
www.idxcorporation.com
3
[3]
5
17.625
[17 5/8]
CLR
2
CONFIDENTIAL:
This drawing and the information herein are the
exclusive property of idX Corporation. Any
reproduction or use without express written consent
is strictly forbidden.
CA TITLE 17:
All composite wood products (MDF, PB, HWPW) are
compliant. Place compliance label as shown within
drawing (or per current standard) and do not
remove after installation.
GLUE BLOCKING
0.125
[1/8]
DIMENSIONS:
All dimensions are in inches unless noted other
wise - views are not to scale unless noted.
MDF SKIRT
THIRD ANGLE PROJECTION
0.125
[1/8]
DETAIL 1
SCALE 3/8
17.563
[17 9/16]
ADJ SHELVES
0.75
[3/4]
0.75
[3/4]
TOLERANCE
UNLESS OTHERWISE NOTED
PVC EDGETAPE
@ JOINT EDGE
X.XXX 0.031 in [X.X 0.8 mm]
X.XX 0.06 in [X.X 1.5 mm]
X.X 0.01 in [X.X 2.5 mm]
ANGLES 1
FRACTIONAL 1/32 in
DRAWN BY:
TROY WHITAKER
4
3
0.81
[13/16]
MELAMINE
SHELVES W/ PVC
EDGETAPE 2 LONG
EDGES
DETAIL 2
SCALE 3/8
0.75
[3/4]
6.75
[6 3/4]
MDF LEG BLOCKING,
GLUE AND SCREW
METAL BASE,
POWDERCOATED
SECTION B-B
SCALE 1/8
3
[3]
0.75
[3/4]
CUSTOMER REF No:
MELAMINE BACK
PARTITON
4
[4]
5/16-18 X 3/4 SERRATED
MACHINE SCREWS
MELAMINE INTERIOR
END
3" SWIVEL CASTER
MDF
0.75
[3/4]
DETAIL 5
SCALE 3/8
PLAM EXTERIOR
END
#10 SCREW BASE TO
DIVIDER/BACK
DETAIL 4
SCALE 3/8
PROJECT:
GENERIC HOME
DETAIL 3
SCALE 3/8
0.5
[1/2]
DESCRIPTION:
HO-102 5FT RUNWAY CUBBY
WITH 3 SHELVES
REV No:
ITEM No:
112584
DOCUMENT No:
A0004007.dwg
SHEET:
4
AS400 No:
SECTION C-C
SCALE 1/8
CUSTOMER:
JC PENNEY
LEGACY - VANTAGE No:
0.75
[3/4]
METAL STIFFENER,
FRONT AND BACK
EDGES
DATE:
11/17/2012
OF
4