Copyright © Richter Spielgeräte GmbH
10/15
R I C H T E R S P I E L G E R Ä T E G M B H · D - 8 3 1 1 2 F R A S D O R F · P H O N E + 4 9 - 8 0 5 2 / 1 7 9 8 0 · F A X 4 1 8 0
Function and Play value
The Metal Bucket Wheels are an
eye-catcher in water play areas, particularly when reflections of sparkling light
emphasise the agreeable design. The
small bowls, arranged in a radial shape,
are very attractive for children. When
the Wheel starts turning by the power of
water, the one at the pump is working
even more intensive in order to accelerate the movement of the wheel. The Large
Bucket Wheel can also be driven by a
stream of water in a channel.
Fundamental characteristics
- high-quality design
-incentive for playing: small buckets
arranged in radial shape
Suitable
- for children from 3 years
-for all water play areas in playgrounds
and adventure parks
- for hard landscapes
- for piazzas and other urban areas
Barrier-free
- independent play
Design J.O. Gaier
Small Bucket Wheel
for concrete base or site foundations
Big Bucket Wheel
Order No. 5.15910 Small Bucket Wheel
for site foundations
5.15900
267
5.15910
5.15920
R I C H T E R S P I E L G E R Ä T E G M B H · D - 8 3 1 1 2 F R A S D O R F · P H O N E + 4 9 - 8 0 5 2 / 1 7 9 8 0 · F A X 4 1 8 0
Order No. 5.15900
Small Bucket Wheel for concrete base
scale 1:20
Technical information
all equipment of stainless steel,
glass bead blasted
thickness of metal sheet 3 mm
ball bearing
low-maintenance, easily replaceable
ball bearings
Order No. 5.15910
Small Bucket Wheel for site foundations
Dimensions
(small deviations possible)
Order No. 5.15900
Small Bucket Wheel for concrete base
width0.45 m
projection over
concrete base
0.50 m
diameter of wheel
0.40 m
weight13 kg
fitting concrete base see Order No.
5.15950 in the price list
Order No. 5.15910
Small Bucket Wheel for site
foundations
height0.45 m
width0.65 m
diameter of wheel
0.40 m
weight15 kg
Order No. 5.15920
Big Bucket Wheel
height0.85 m
width1.10 m
diameter of wheel
0.80 m
weight22 kg
Components
1 part each
Installation information
Surfacing requirements
Recommendation: sand with drainage
or paving stone with gully
The Bucket Wheels are made for
overshot operation. The required
minimum height difference can be seen
in the drawing. If it is wished to install
the Big Bucket Wheel for undershot
operation, a large amount of water
and a strong flow is required for it to
function correctly. A minimum waterflow rate of 66 cm/sec. is required. The
bottom bucket should dip into the
water by about half, or even better,
three quarters of its diameter. When
the Bucket Wheel is driven by banked
up water an amount of at least 3/4 m³ is
required to generate a few revolutions.
The Small Bucket Wheel cannot be
operated undershot at all.
Order No. 5.15920
Big Bucket Wheel
Safety check according to EN 1176
5.15900
5.15910
5.15920
268
Foundations
Order No. 5.15910
1item 50 x 90 x 30 cm
excavation depth 70 cm
Order No. 5.15920
2items 40 x 40 x 30 cm
excavation depth 50 cm
Attention:
Exact measurements may vary, for
all installation dimensions refer to
current installation instructions.
Technical changes reserved.
For use in chlorine water the equipment is also available with a special
steel alloy.
47
For more detailed explanation of the
quality characteristics see price list.
diameter of hemisphere 150 mm