1
KINDLE LAMINATE
PRODUCT SPECIFICATION GUIDE
CONTENTS
INTRODUCTION...........................................................................................3
2
ASSEMBLED MODELS .............................................................................12
SURFACES ....................................................................................................13
SUPPORT & PANEL MODELS ............................................................... 20
MODULAR MODELS.................................................................................21
UNDERSTANDING HANGING CAB W/ & W/O PAPER.................. 23
HANGING CABINET SUPPORTS ......................................................... 25
STORAGE CABINETS ............................................................................... 25
UNDERSTANDING BOOKCASES CAB W/ & W/O PAPER ............ 26
UNDERSTANDING STACK-ON STORAGE ......................................... 28
FREESTANDING STORAGE MODELS ................................................. 30
UNDERSTANDING SUPPORTS..............................................................31
UNDERSTANDING RAMP PULLS ........................................................ 36
VIGNETTES ..................................................................................................37
INSTALLATION GUIDES ......................................................................... 43
INTRODUCTION TO KINDLE LAMINATE
INTRODUCTION
3
Kindle is
Flexible
Kindle is designed to offer you an adaptable product line to meet
the demands of today’s workspace where flexibility is a must. Kindle
gives you a broad choice of materials available in modular and
assembled options that let you exercise your design muscles while
providing stylish storage solutions. Multiple work surface depths
and standard and tall storage options make Kindle adaptable to any
space and footprint!
Diverse
Kindle is a series that is available in laminate, mixed materials and
is fit for virtually any application. For executive suites, you can dial
it up with tall storage to accommodate any executive’s work style
and aesthetic goals. Kindle also addresses teaming applications by
providing a similar look and feel using laminates or mixed materials
while lowering your total project costs. The ability to specify different
door materials gives the designer/specifier the ultimate in design
options.
Quality
Combining the versatility of Kindle with our quality standards and
fast order fulfillment, this series is the total package.
With full extension on all drawers, miter fold laminate drawer
construction or English dovetail wood options, PVC or edge on
HPL tops (TFL tops are 1-1/8” ) and backed by our Paoli LLC Limited
Lifetime Warranty.
EDGE DETAILS
ridge edge
RG
I-beam
IB
soft edge
SO
PULLS
6
bead pull
BD
beam pull
BM
ramp pull
RP
sweep pull
SW
4
WOOD GRAIN LAMINATES
* also available in High Pressure Laminate (HPL)
walnut
heights
535 *
studio
teak
531 *
skyline
walnut
527 *
colombian
walnut
519 *
autumn
cherry II
211 *
shaker
cherry
231 *
sienna
cherry
227
cordovan
cherry
223
walnut heights (535), studio teak (531), Skyline walnut (527 & colombian walnut (519)
are open grain HPL tops
kensington
maple
311 *
harvest
maple
313 *
SOLID LAMINATES
Frosty
White
732
Monterey
Beige
742
Grey
Cloud
736
Slate
Grey
756
These printed samples are intended as finish color representations. Actual samples should be used for finish color matching and sheen.
cafelle
cherry
215 *
GROMMETS
Grommet:
Optional grommets - $100 retail upcharge. See below for location of grommets.
Grommet finish matches pull
Profiled edge shown in heavy black line
6”
6”
6”
6”
6”
6”
24 5⁄8”
24 5⁄8”
24 5⁄8”
PK_4272BDT
PK_3672BDP
PK_3672BDPS
PK_4272FDL/FDR
PK_4272FDSL/FDSR
L = Left
R = Right
B = Both Left & Right
N = None
6”
PK_3672BDL/BDR
PK_3672BDSL/BDSR
L = Left
B = Both Left & Right
6”
6”
R = Right
N = None
Modular Only
6”
6”
PK_3066DL/DR
PK_3066DSL/DSR
PK_3060DL/DR
PK_3066DSL/DSR
L = Left
B = Both Left & Right
R = Right
N = None
6”
6”
6”
5
X_
X_
X_
X_= 24 5⁄8”
PK_3672DP
PK_3672DL/DR
PK_3672DPS
PK_3672DSL/DRS
X_= 19 1⁄2”
PK_3072DPS, PK_3066DPS, PK_3060DPS
L = Left
R = Right
B = Both Left & Right
N = None
PK_3066DP
PK_3066DPS
30” modular desk top
24” deep modular pedestals shown
Left shown
PK_4872CDTL/CDTR
PK_4272CDTL/CDTR
Using 24” D pedestal X_ = 19 1⁄2”
L24 = Left
R24 = Right
B24 = Both Left & Right
N = None
Using 24” D pedestal X_ = 31 1⁄2”
L24 = Left
R24 = Right
B24 = Both Left & Right
N = None
Using 30” D pedestal X_ = 245⁄8”
L30 = Left
R30 = Right
B30 = Both Left & Right N = None
Using 30” D pedestal X_ = 365⁄8”
L30 = Left
R30 = Right
B30 = Both Left & Right N = None
20 1⁄2”
Center
PK_24_ _CC
PK_24_ _CK
PK_24_ _RS
PK_2472C_L/C_R
PK_2466C_L/C_R
PK_24_ _WS
L = Left
B = Both Left & Right
C = Center
R = Right
A = All
N = None
Center
Left shown
PK_4284FCL/FCR
PK_4278FCL/FCR
PK_4272FCL/FCR
PK_36_ _RCE
PK_30_ _RCE
C - Center
N = None
C - Center
N = None
3 1⁄2”
Center
Center
Center
PK_3684BCE
PK_3072BCE
PK_3060BCE
PK_3672BCE
PK_3066BCE
PK_2460BCE
C - Center
3 1⁄2”
Left shown
PK_4272CBL/CBR
PK_4266CBL/CBR
Left shown
PK_3672CPL/CPR
N = None
C - Center
N = None
C - Center
N = None
3 1⁄2”
6”
6”
Center
19 1⁄2”
Center
Left shown
PK_4284PCL/PCR
PK_4272PCL/PCR
PK_3672PCL/PCR
PK_3072PCL/PCR
Left shown
PK_3672CWSL/WSR
PK_3666CWSL/WSR
L = Left
B = Both Left & Right
R = Right
N = None
C - Center
N = None
Left shown
PK_3672VCL/VCR
PK_3666VCL/VCR
C - Center
N = None
DETAILED SPECIFICATIONS
INTRODUCTION
TOPS:
Thermally Fused Laminate (TFL): Kindle TFL tops are 1-1⁄8” thick and feature a 3 ply balanced panel
construction with PVC banded edges.
High Pressure Laminate (HPL): Kindle HPL tops are 1-1⁄8” thick and feature a 3 ply balanced panel
construction with PVC banded edges.
LAMINATE TOP EDGES:
Thermally Fused Laminate (TFL) or High Pressure Laminate (HPL) Tops: PVC edges with Ridge,
Soft or I Beam profile.
Desktops feature the selected edge detail on user and approach side, with all other edges Soft
profile. Credenzas, returns and bridges have the selected edge detail on user side, with all other
edges Soft profile.
6
MATERIALS / FINISHES:
Thermally Fused Laminate (TFL) available in Autumn Cherry II, Cafelle, Cordovan Cherry, Shaker
Cherry, Sienna Cherry, Harvest Maple, Kensington Maple, Colombian Walnut, Walnut Heights,
Skyline Walnut, Studio Teak, Frosty White, Slate Grey, Grey Cloud and Monterey Beige.
High pressure laminate (HPL) available in Autumn Cherry II, Cafelle, Shaker Cherry, Harvest Maple,
Kensington Maple, Colombian Walnut*, Walnut Heights*, Skyline Walnut*, Studio Teak*, Frosty
White, Slate Grey, Grey Cloud, and Monterey Beige.
Laminate units that are wider than 60” will have horizontal grain.
CHASSIS CONSTRUCTION:
All units are reinforced with cams, dowels and metal brackets. All base units have adjustable
leveling glides to compensate for uneven floor surfaces. Drawer and Door fronts are full overlay.
DRAWER CONSTRUCTION TYPE:
Drawer fronts are attached separately to the fully assembled drawer boxes. Drawer fronts are
available in laminate matched sets.
Standard construction: Four sided, miter folded laminate box. Drawers are built with 1/2” laminate
sides and 3/16 bottoms.
Optional construction: Four corner, English dovetailed wood box. Finished with three-step
catalyzed varnish to seal the grain and provide a smoother inner surface. Drawers are built with
7⁄16” wood sides and 3⁄16” wood bottoms.
DRAWER SUSPENSION:
File drawers utilize a heavy duty full extension metal ball bearing slide for smooth operation. Box
drawers operate on full extension slides allowing complete access to the drawer.
FILE DRAWERS:
File drawers ship with a filing system. Letter width file drawers accommodate letter or legal filing.
*open grain HPL tops
DETAILED SPECIFICATIONS
INTRODUCTION
LOCKING:
Pedestal locking is standard on desks, credenzas, returns and modular units.
DRAWER HARDWARE:
Four pull styles are available in Matte Chrome & Matte Black finish. Specify style and finish when
ordering.
METAL SUPPORTS:
Only available in Alloy.
HINGES:
Hinges are European style and are easily adjustable in the field.
OPTIONS:
Kindle desks are full pedestals. Kindle is available as assembled components or modular
components.
Upper Bookcase & Hanging Cabinet Doors
Size
# of Doors
# of Doors
# of
Hinged
Sliding
Openings
108”
6
2
3
102”
6
2
3
96”
5
2
3
90”
5
2
3
Paper Storage # of openings
6
6
108” - 90” models with paper have 2 sliding doors
5
5
108” - 90” models have 2 sliding doors
84”
78”
72”
66”
60”
5
4
4
4
3
1
1
1
1
1
2
2
2
2
2
5
4
4
4
4
84” - 60” models with paper have 1 sliding door
84” - 60” models have 1 sliding door
7
DRAWER CONSTRUCTION - Standard Laminate Drawer
INTRODUCTION
Miter Fold Drawers
Construction
Four corner construction Miter box and file drawers are built as separate unit.
Drawers are built with 1/2” laminate sides and 3/16 bottoms.
Drawer fronts are matched laminate.
Drawer fronts are 3-ply construction
Core is 45# fiberboard.
Drawer fronts fully overlay the chassis
File system
File drawers come with an integrated filing system with tool less reconfiguring.
Letter width file drawers on desks and credenzas accommodate letter or legal filing.
Suspension
Drawer slides are heavy duty full extension steel ball bearing slides for smooth operation
Box drawer slides operate on full extension slides allowing full access to drawer.
Slides on desk and credenza drawers are rated at 100 lbs per set.
Slides on lateral file are rated 150 lbs per set.
8
Full-extension metal ball-bearing suspensions are featured on all Paoli drawers – center, box and file – to offer
accessibility, strength and ease of use
Miter Fold drawers are testament to Paoli’s legacy of craftsmanship and durability.
INTRODUCTION
DRAWER CONSTRUCTION - Optional Wood Drawer
Drawers
Construction
Four corner construction dovetail box and file drawers are built as separate unit.
Drawers are built with 7/16” wood sides and 3/16” wood bottoms.
Drawers are finished with a 3-step catalyzed varnish finish to seal grain.
Drawer fronts are matched laminate.
Drawer fronts are 3-ply construction
Core is 45# fiberboard.
Drawer fronts fully overlay the chassis
File system
File drawers come with a heavy-duty filing system.
Letter width file drawers on desks and credenzas accommodate letter or legal filing.
Suspension
Drawer slides are heavy duty full extension steel ball bearing slides for smooth operation
Box drawer slides operate on full extension slides allowing full access to drawer.
Slides on desk and credenza drawers are rated at 100 lbs per set.
Slides on lateral file are rated 150 lbs per set.
9
Full-extension metal ball-bearing suspensions are featured on all Paoli drawers – center, box and file – to offer accessibility, strength and ease of use
Wood drawers are sanded smooth and finished to a satin sheen. Dovetailed joinery is testament to Paoli’s legacy of
craftsmanship and durability.
DRAWER SIZES
INTRODUCTION
<ŝŶĚůĞ>ĂŵŝŶĂƚĞƌĂǁĞƌ^ŝnjĞƐ
^ŝnjĞƐĂƌĞŽǀĞƌĂůůĚŝŵĞŶƐŝŽŶ
Ž
dž
ϮϮ ƌĂǁ
džϰ Ğƌϭ
Ͳϭ ϱͲ
ͬϰ ϳͬ
&ŝů
, ϭϲ
Ğ
t
ƌ
dž
ϮϮ Ăǁ
Ğ
džϵ ƌϭ
Ͳϳ ϱͲϳ
ͬϴ ͬ
Ž
, ϭϲ
dž
t
dž
ϭϲ ƌĂǁ
džϰ Ğƌϭ
Ͳϭ ϱͲ
ͬϰ ϳͬ
&ŝů
, ϭϲ
Ğ
t
ƌ
dž
ϭϲ Ăǁ
Ğ
džϵ ƌ
Ͳϳ ϭϱͲ
ϯϲ
ͬϴ ϳͬ
, ϭϲ
Η>
t
Ă
ƚ
džϭ Ğ
dž
ϲ ƌĂů
dž &ŝů
ϵͲ Ğϯ
ϳͬ ϯ
ϯϬ
ϴ, Ͳϳͬ
Η>
ϭϲ
Ă
džϭ ƚĞ
t
ϲ ƌĂů
&
dž ŝů
ϵͲ Ğϯ
ϳͬ Ϯ
ϯϲ
ϴ, Ͳϳͬ
Η
ϴt
ϳ ͬ Ž dž
ϭϲ ƌ
t Ăǁ
dž Ğƌ
ϭϲ ϯ
ϯͲ
ϯϬ
džϰ
Η
Ͳϭ
Ž
ϳ ͬ dž
Ͳϭ
ϴt ƌ
ͬϰ
,
dž Ăǁ
Ğ
ϭϲ ƌ
ϯϮ
džϰ Ͳ
Ͳϭ
ͬϰ
,
ϭϬͬϭϲͬϮϬϭϱ
ĞƐŬϰϮdžϳϮ
ĞƐŬϯϲdžϳϮ
ĞƐŬϯϬϳϮ
10
dž
dž
dž
dž
dž
dž
ƌĞĚĞŶnjĂϯϲΗWĞĚĞƐƚĂů
ƌĞĚĞŶnjĂϯϬΗWĞĚĞƐƚĂů
ƌĞĚĞŶnjĂϭϴΗWĞĚĞƐƚĂů
dž
ZĞƚƵƌŶǁŝƚŚϯϲΗƉĞĚĞƐƚĂů
ZĞƚƵƌŶǁŝƚŚϯϬΗƉĞĚĞƐƚĂů
ZĞƚƵƌŶǁŝƚŚϭϴΗƉĞĚĞƐƚĂů
dž
dž
dž
dž
ϯϲΗĞĞƉDŽĚƵůĂƌWĞĚĞƐƚĂů
ϭϴΗtŝĚĞ
dž
dž
ϯϬΗĞĞƉDŽĚƵůĂƌWĞĚĞƐƚĂů
ϭϴΗtŝĚĞ
dž
dž
ϮϰΗĞĞƉDŽĚƵůĂƌWĞĚĞƐƚĂů
ϯϲΗtŝĚĞ
ϯϬΗtŝĚĞ
ϭϴΗtŝĚĞ
ϮϬΗĞĞƉDŽĚƵůĂƌWĞĚĞƐƚĂů
ϯϲΗtŝĚĞ
ϯϬΗtŝĚĞ
ϭϴΗtŝĚĞ
ϮϰΗĞĞƉDŽĚƵůĂƌWĞĚĞƐƚĂů>ŽǁĞƌ
ϯϲΗtŝĚĞ
ϯϬΗtŝĚĞ
ϭϴΗtŝĚĞ
ϮϬΗĞĞƉDŽĚƵůĂƌWĞĚĞƐƚĂůůŽǁĞƌ
ϯϲΗtŝĚĞ
ϯϬΗtŝĚĞ
ϭϴΗtŝĚĞ
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
dž
11
THIS PAGE INTENTIONALLY LEFT BLANK
ASSEMBLED MODELS
DESK MODELS
Desks
Recessed
Stepped
Returns
12
Bridges w/Modesty
Credenzas
Low
Corner Units
SURFACES
MODULAR MODELS
Rectangular Tops
MODEL
DESCRIPTION
PK_3060DT
TOP, RECTANGULAR DESK
DIM "A"
60"
PK_3066DT
TOP, RECTANGULAR DESK
66"
PK_3072DT
TOP, RECTANGULAR DESK
72"
PK_3078DT
TOP, RECTANGULAR DESK
78"
PK_3084DT
TOP, RECTANGULAR DESK
84"
PK_3666DT
TOP, RECTANGULAR DESK
66"
PK_3672DT
TOP, RECTANGULAR DESK
72"
PK_3678DT
TOP, RECTANGULAR DESK
78"
PK_3684DT
TOP, RECTANGULAR DESK
84"
36"
"A"
30"
"A"
Rectangular Conference Extension
MODEL
PK_3666RCE
PK_3672RCE
DESCRIPTION
TOP, RECTANGULAR CONFERENCE EXTENSION
TOP, RECTANGULAR CONFERENCE EXTENSION
WIDTH
36"
36"
"A"
66"
72"
PK_3684RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
36"
84"
PK_3042RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
30"
42"
PK_3048RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
30"
48"
PK_3054RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
30"
54"
PK_3060RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
30"
60"
PK_3066RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
30"
66"
PK_3072RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
30"
72"
PK_3078RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
30"
78"
PK_3084RCE
TOP, RECTANGULAR CONFERENCE EXTENSION
30"
84"
36"
"A"
30"
"A"
13
SURFACES
MODULAR MODELS
Corner Desk Worksurface
MODEL
DESCRIPTION
DIM "A"
DIM "B"
PK_4272CDTL
CORNER DESK WORK SURFACE, LEFT
42"
30"
PK_4872CDTL
CORNER DESK WORK SURFACE, LEFT
48"
36"
PK_4272CDTR
CORNER DESK WORK SURFACE, RIGHT
42"
30"
PK_4872CDTR
CORNER DESK WORK SURFACE, RIGHT
48"
36"
"B"
72"
"A"
14
"A"
24"
LEFT
72"
24"
"B"
RIGHT
Rectangular Worksurface
02'(/
'(6&5,37,21
',0$
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
3.B:6 :25.685)$&(6
20” Wide also available
24"
"A"
"A"
:LGH
SURFACES
MODULAR MODELS
Corner Rectangular Worksurface
MODEL
DESCRIPTION
DIM "A"
PK_3666CWSL
CORNER RECTANGULAR WORK SURFACE, LEFT
66"
PK_3672CWSL
CORNER RECTANGULAR WORK SURFACE, LEFT
72"
PK_3666CWSR
CORNER RECTANGULAR WORK SURFACE, RIGHT
66"
PK_3672CWSR
CORNER RECTANGULAR WORK SURFACE, RIGHT
72"
24"
"A"
36"
LEFT
36"
15
"A"
24"
RIGHT
Crossgrain Rectangular Worksurface
24" MODEL
PK_2430RS
PK_2436RS
PK_2442RS
PK_2448RS
PK_2454RS
PK_2460RS
DESCRIPTION (24" WIDE)
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
DIM "A"
30"
36"
42"
48"
54"
60"
20" MODEL
PK_2030RS
PK_2036RS
PK_2042RS
PK_2048RS
PK_2054RS
PK_2060RS
DESCRIPTION (20" WIDE)
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
CROSSGRAIN RECTANGULAR RETURN WORK SURFACE
DIM "A"
30"
36"
42"
48"
54"
60"
24"
"A"
20"
"A"
24" WIDE MODELS
20" WIDE MODELS
SURFACES
MODULAR MODELS
Bullet Top Conference Extension
MODEL
DESCRIPTION
DIM
"A"
24"
DIM
"B"
60"
DIA
"C"
24"
PK_2460BCE
BULLET TOP CONFERENCE EXTENSION
PK_3060BCE
BULLET TOP CONFERENCE EXTENSION
30"
60"
30"
PK_3066BCE
BULLET TOP CONFERENCE EXTENSION
30"
66"
30"
PK_3072BCE
BULLET TOP CONFERENCE EXTENSION
30"
72"
30"
PK_3672BCE
BULLET TOP CONFERENCE EXTENSION
36"
72"
36"
PK_3684BCE
BULLET TOP CONFERENCE EXTENSION
36"
84"
36"
A
B
16
C
P Top Conference Extension
02'(/
'(6&5,37,21
',0$ ',0% ',0&
3.B3&/ 723&21)(5(1&((;7(16,21/()7
3.B3&/ 723&21)(5(1&((;7(16,21/()7
3.B3&/ 723&21)(5(1&((;7(16,21/()7
3.B3&/ 723&21)(5(1&((;7(16,21/()7
3.B3&5 723&21)(5(1&((;7(16,215,*+7
3.B3&5 723&21)(5(1&((;7(16,215,*+7
3.B3&5 723&21)(5(1&((;7(16,215,*+7
3.B3&5 723&21)(5(1&((;7(16,215,*+7
"A"
"C"
"B"
"C"
"A"
LEFT
RIGHT
SURFACES
MODULAR MODELS
Corner Bullet Top Worksurface
MODEL
DESCRIPTION
PK_4266CBL
CORNER BULLET WORK SURFACE LEFT
DIM
"A"
66"
PK_4272CBL
CORNER BULLET WORK SURFACE LEFT
72"
PK_4266CBR
CORNER BULLET WORK SURFACE RIGHT
66"
PK_4272CBR
CORNER BULLET WORK SURFACE RIGHT
72"
Ø30"
17
A
42"
24"
42"
Ø30"
LEFT HAND SHOWN
24"
A
RIGHT HAND SHOWN
Corner P Top Worksurface
PK_3672CPL
CORNER "P" WORK SURFACE LEFT
DIM
"A"
30"
PK_3672CPR
CORNER "P" WORK SURFACE RIGHT
30"
MODEL
DESCRIPTION
DIM
"B"
72"
DIA
"C"
30"
72"
30"
24"
A
B
C
C
B
LEFT HAND
24"
A
5,*+7+$1'
SURFACES
MODULAR MODELS
Bow Top Desktops
BOW TOP DESKTOP
DIM
"A"
30"
DIM
"B"
36"
DIM
"C"
72"
PK_4272BDT
BOW TOP DESKTOP
36"
42"
72"
PK_3684BDT
BOW TOP DESKTOP
30"
36"
84"
MODEL
DESCRIPTION
PK_3672BDT
B
A
C
18
Fin Top Conference Extensions
MODEL
PK_4272FCL
PK_4272FCR
PK_4278FCL
PK_4278FCR
PK_4284FCL
PK_4284FCR
DESCRIPTION
FIN TOP CONFERENCE EXTENSION LEFT
DIM
"A"
33-1/2"
FIN TOP CONFERENCE EXTENSION RIGHT 33-1/2"
DIM
"B"
42"
DIM
"C"
72"
42"
72"
33-1/2"
42"
78"
FIN TOP CONFERENCE EXTENSION RIGHT 33-1/2"
FIN TOP CONFERENCE EXTENSION LEFT
42"
78"
33-1/2"
42"
84"
FIN TOP CONFERENCE EXTENSION RIGHT 33-1/2"
42"
84"
FIN TOP CONFERENCE EXTENSION LEFT
A
C
B
B
C
LEFT HAND
A
5,*+7+$1'
SURFACES
MODULAR MODELS
Curved Conference Extensions
PK_3666VCL
CURVED CONFERENCE EXTENSION LEFT
DIM
DIM
"A"
"B"
30-3/8" 66"
PK_3666VCR
CURVED CONFERENCE EXTENSION RIGHT
30-3/8"
66"
PK_3672VCL
CURVED CONFERENCE EXTENSION LEFT
30"
72"
PK_3672VCR
CURVED CONFERENCE EXTENSION RIGHT
30"
72"
MODEL
DESCRIPTION
30"
30"
A
19
A
B
LEFT HAND
B
30"
5,*+7+$1'
30"
SUPPORT & PANEL MODELS
Support Legs
Support Panels
20
Modesty / Back Panels
Privacy Panels
MODULAR MODELS
MODULAR MODELS
PEDESTAL MODELS
Storage Pedestals - 18”, 30” & 36” Wide
Standard 20” Deep Pedestals
21
24” Deep Pedestal - Standard
18” Wide
30” Deep Pedestal - Standard
36” Deep Pedestal - Standard
LOW STORAGE MODELS
Low Storage - 18”, 30” & 36” Wide - use with 1 1/8” tops
20” Deep Pedestals - Low
22
24” Deep Pedestals - Low
MODULAR MODELS
UNDERSTANDING HANGING CABINETS W/ & W/O PAPER
•
•
•
•
Hanging Cabinets are available in standard height, tall
height. They come with paper storage (P) or without paper
storage.
Standard and tall hanging cabinets up to and including
54” wide are available with open or hinged door options
only. Standard and tall hanging cabinets over 54” wide are
available with open or hinged or sliding door options.
Hanging cabinets are wall hung (mounting hardware
included), the hanging cabinet must be attached to a wall.
The following coordinating products are available for upper
bookcases: lighting, tackboards and cabinet tops.
Size
No. Doors
Hinged
108”
102”
96”
90”
84”
78”
72”
66”
60”
54”
48”
42”
36”
30”
6
6
5
5
5
4
4
4
3
3
3
3
2
2
•
•
•
STORAGE MODELS
Grain Direction for Door Fronts: Vertical
Grain Direction for Back Panels: Laminate: Up to and
including 60” wide: Vertical grain. Over 60” wide: Horizontal
grain. Veneer: Vertical grain.
Hanging cabinet tops, chassis and doors can be specified
in different materials/finishes allowing for mixed material
aesthetics. Laminate hanging cabinet door/drawer fronts
are available in laminate only.
No. Doors No. of
Sliding
Openings
2
2
2
2
1
1
1
1
1
n/a
n/a
n/a
n/a
n/a
3
3
3
3
2
2
2
2
2
2
2
2
1
1
23
108” - 90” models with paper have 2 sliding doors
108” - 90” models have 2 sliding doors
84” - 60” models with paper have 1 sliding door
84” - 60” models have 1 sliding door
Standard Hanging Cabinets without Paper Storage
Hinged Doors
Standard Hanging Cabinets with Paper Storage
Hinged Doors
Sliding Doors
Sliding Doors
Open
HANGING CABINET MODELS
MODULAR MODELS
Hanging Cabinets
Standard Hanging Cabinets 17” H
Hinged Doors
Sliding Doors
Open
24
Tall Hanging Cabinets 29” H
Hinged Doors
Sliding Doors
Standard Hanging Cabinets with Paper Storage 22 3/4” H
Hinged Doors
Open
Sliding Doors
Tall Hanging Cabinets with Paper Storage 34 3/4” H
Hinged Doors
Open
Sliding Doors
Double & Single Height Shelves
Double Height 29” H
Single Height 17” H
MODULAR MODELS
STORAGE MODELS
Hanging Cabinet Supports
Standard & Tall Hanging
Cabinet Supports
Note: When using with a tackboard subtract 18” per support.
72” Hanging Cabinet with 2 supports = 54” tackboard
right shown
Standard & Tall Hanging
Cabinet with Paper Storage Supports
25
right shown
Storage Cabinets
Lateral Files
Mobile Pedestals - Low Height
Bookcases
Bookcase Storage
UNDERSTANDING UPPER BOOKCASES W/ & W/O Paper
•
•
•
26
Upper Bookcases are available in standard height, tall
height. They come with paper storage (P) or without
paper storage.
Standard and tall upper bookcases up to and
including 54” wide are available with open or hinged
door options only. Standard and tall upper bookcases
over 54” wide are available with open or hinged or
sliding door options.
The following coordinating products are available for
upper bookcases: lighting, tackboards and cabinet
tops.
Standard Upper Bookcases without Paper Storage 42” H
Hinged Doors
Sliding Doors
Open
Standard Upper Bookcases with Paper Storage 42” H
Hinged Doors
Tall Upper Bookcases with Paper Storage 54” H
Hinged Doors
•
•
•
STORAGE MODELS
Grain Direction for Door Fronts: Vertical
Grain Direction for Back Panels: Laminate: Up to
and including 60” wide: Vertical grain. Over 60” wide:
Horizontal grain. Veneer: Vertical grain.
Upper bookcase tops, chassis and doors can be
specified in different materials/finishes allowing for
mixed material aesthetics. Laminate upper bookcase
door/drawer fronts are available in laminate only.
Size
No. Doors
Hinged
108”
102”
96”
90”
84”
78”
72”
66”
60”
54”
48”
42”
36”
30”
6
6
5
5
5
4
4
4
3
3
3
3
2
2
No. Doors No. of
No. of Paper
Sliding
Openings Openings
2
2
2
2
1
1
1
1
1
n/a
n/a
n/a
n/a
n/a
3
3
3
3
2
2
2
2
2
2
2
2
1
1
Sliding Doors
Sliding Doors
Open
6
6
5
5
5
4
4
4
3
3
3
3
2
2
UPPER BOOKCASE MODELS
MODULAR MODELS
Upper Bookcases - 30”, 36”, 42” 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90”, 96”, 102” & 108”
Standard Upper Bookcases without Paper Storage 42” H
Hinged Doors
Tall Upper Bookcases without Paper Storage 54” H
Hinged Doors
Sliding Doors
Sliding Doors
27
Standard Upper Bookcases with Paper Storage 42” H
Hinged Doors
Tall Upper Bookcases with Paper Storage 54” H
Hinged Doors
PKE models for use with 1 1/2” tops
Sliding Doors
Sliding Doors
UNDERSTANDING STACK-ON STORAGE
•
•
•
•
28
STORAGE MODELS
Stack-on storage is available in 18”, 30” and 36” widths
and in standard (42”) and tall (54”) heights.
Options include open or laminate door materials.
This allows for mixed material applications.
Stack-on 7/8 hgt doors
Grain direction for door fronts: Vertical
Grain direction for back panels: Vertical
MODULAR MODELS
Stack-On Storage - 18”, 30” & 36”
Standard Stack On Storage - 7/8 Doors 42” H
Tall Stack On Storage - 7/8 Doors 56” H
STACK ON STORAGE MODELS
29
THIS PAGE INTENTIONALLY LEFT BLANK
24” DEEP FREESTANDING STORAGE MODELS
•
•
•
Freestanding storage is available in 18”, 24”, 30” and
36” widths.
Door options include laminate and in some cases no
door. This allows for mixed material applications.
Some freestanding storage models are with shelves
on the secondary side of the unit.
•
Mid
Std
Tall
Side Access
Grain direction for door fronts: Vertical
Grain direction for back panels: Vertical
Freestanding storage tops, chassis and doors/
drawers can be specified in different materials/
finishes allowing for mixed material aesthetics.
Laminate freestanding storage door/drawer fronts are
available in laminate only.
Mid
Std
Tall
Storage Cabinet / Wardrobe
N/A
30
•
•
•
MODULAR MODELS
N/A
Personal Cabinet
Standard Bookcase Wardrobe
N/A
Single Wardrobe
N/A
N/A
Standard Wardrobe Cabinet
S
T
N/A
No Doors
Standard Storage Cabinet
N/A
N/A
Standard Storage Cabinet - Lateral File
N/A
UNDERSTANDING SUPPORTS
31
MODESTY PANELS
UNDERSTANDING PANELS
1/2 or full height modesty panels can be used between pedestals.
Pedestals are also available with optional back panels.
WORK SURFACE
PEDESTAL
32
BACK PANEL
MODESTY
PANEL
PEDESTAL
BACK PANEL
WORK SURFACE
PEDESTAL
HINGED MODESTY
"L" SUPPORT
UNDERSTANDING PANELS
L & T SUPPORT PANELS
“L” and “T” support panels can be used in place of wing end panels
and full back panels. Unsupported spans greater than 54” must
have a support added.
WORK SURFACE
"U" CHANNEL
PEDESTAL
33
SUPPORT
"L" SUPPORT
CONFERENCE
EXTENSION
"U" CHANNEL
CREDENZA
CONFERENCE
EXTENSION
"U" CHANNEL
MODESTY / BACK PANELS
UNDERSTANDING PANELS
Full width modesty panels are used with a pedestal or an end panel
WORK SURFACE
LATERAL FILE
34
MODESTY / BACK PANEL
PEDESTAL
WORK SURFACE
MULTI FILE
ND#!
MODESTY/BACK PANEL
UNDERSTANDING PANELS
END PANELS
Wing end panels are used with full back panels. End panels are used
with half height modesty panels
BACK PANEL
TOP (HIDDEN)
END
PANEL
WORK SURFACE
END PANEL
END PANEL
BACK PANEL
WORK SURFACE
SUPPORT LEG
MODESTY PANEL
END PANEL
35
UNDERSTANDING RAMP PULLS
INTRODUCTION
Freestanding
Storage
Ramp Pull
03543
Filler Plate
109026
36
Ramp Pull
Left
Ramp Pull
Right
Interior view
Ramp Pulls (03543) always ship
on right side and can be
relocated to left side in the field.
Pocket locations provided both
sides - Use Filler Plate (109026) in
the pocket opposite of the pull
Lateral Files
Lateral files ship
with Ramp Pulls
(03543) on both
sides of drawer
face
Pedestals
Ramp Pulls (03543)
always ship on right side
and can be relocated
to left side in the field.
Pilot holes drilled boths
sides.
Ramp Pull
Left
Ramp Pull
Right
Interior view
VIGNETTES
37
VIGNETTE T7942
pricing for T7942at
paoli.com
38
VIGNETTES
VIGNETTES
VIGNETTE T7942
39
Item
1
2
3
4
5
6
7
8
9
10
Model Number
P-AT16108UB-TB
PKL1536BC5
PKL16108SUB
PKL2330SP5
PKL2330SP4
PKL24108WS
PKL2418SWCR
PKL2436SSC2
PKL28108MP
PKL3066ADP
Description
Kindle UPPER BOOKCASE TACKBOARD 21” x 106”
Kindle TFL Bookcase Open 5 Shelf 15x36x71
Kindle TFL Std Upper Bookcase 16x108x42 - HGMF
Kindle TFL Mod Ped MF 23-1/4x30x27-7/8
Kindle TFL Mod Lat File 23-1/4x36x27-7/8
Kindle TFL Worksurface 24x108x1-1/8
Kindle TFL Std Wardrobe Cabinet 24x18x71 R
Kindle TFL Std Storage Cabinet FF 24x30x71
Kindle TFL Full Height 3/4x107-15/16x27-7/8
Kindle TFL Adj Height Pneum Desk 30x66x29
Qty
1
1
1
1
1
1
1
1
1
1
VIGNETTE T8052
pricing for T8052
at paoli.com
40
VIGNETTES
VIGNETTES
VIGNETTE T8052
9
2
7
41
3
5
4
6
8
Item
1
2
3
4
5
6
7
8
9
Model Number
PKL3018SPB3
PKL4272FCL
PKL1930LP2
PKL1930LP0
PKL2090WS
PKL2290MP
PKM0306SL
PKL1236MP
PKL1678SHC
1
Description
Kindle TFL Mod Ped w/Back BBF 30x18x27-7/8
Kindle TFL Fin Conference Ext 42x72x1-1/8 L
Kindle TFL Mod Ped Low B/LF 19-1/4x30x21-3/8
Kindle TFL Mod Ped Low Open 19-1/4x30x21-3/8
Kindle TFL Worksurface 20x90x1-1/8
Kindle TFL Low Back Panel 3/4x89-15/16x21-3/8
Kindle Metal Supports (Set of 2) 2-1/2x2x5-3/8
Kindle TFL Half Height Modesty 3/4x35-15/16x12
Kindle TFL Std Hanging Cabinet 16x78x17 - HGL
Qty
1
1
1
2
1
1
1
1
1
42
THIS PAGE INTENTIONALLY LEFT BLANK
INSTALLATION
INST000002
CABINET TOP
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
#8 x 1-´3K)ODW+HDG6FUHZ05410)
43
Tape Measure
Purpose:
To locate and attach cabinet top.
Unit w/ Cabinet Top Added
Installation:
1) Center the cabinet top on unit(s) and align back edge of top with back edge of
unit(s).
2) From below, use a Philips driver and the provided screws to secure the cabinet
top onto the unit(s). Locate screws near corners of unit and centered along
front/back edges.
Cabinet Top on Single Unit
Cabinet Top on Multiple Units
INST000002
Rev A
(8/15)
INSTALLATION
INST000003
FLAT PLATE
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
44
#10 x 3´3KPan Head Screw (05472)
Flat 3ODWH´25
´
Tape Measure
Purpose:
To locate and attach flat plates.
Detail view from above
Installation:
Warning: 0D[LPXPXQVXSSRUWHGVSDQVKRXOGQRWH[FHHG´0XVW
add Modesty Panel or U-Channel Support.
1) Identify intended layout/application of units.
Note: Units may be ordered as modular components or assembled
units. Assemble modular components as intended before attaching
flat plates. Because of the versatility of modular components, all
included plates may not be required for every application.
Bridge Application
Return Application
Conference Application
Conference Application
2) Locate and attach flat plate as shown. Center plate(s) on joint and filling all holes in flat
plates with screws provided.
Flat Plate Location
INST000003
Rev A
(8/15)
INSTALLATION
INST000004
MODESTY/BACK PANEL
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
[´3K3DQ+HDG6FUHZ05452)
L Bracket (05151)
´2SHQ(QG
Wrench
Mending Plate Pack (03455)
#2 Philips Driver
#8 x 1-´3K)ODW+HDG6FUHZ05410)
Level
Glide (2200321100)
[´3K)ODW+HDG
Screws (05408)
Purpose:
To attach Modesty/Back panel to modular component.
Installation (Modesty):
1) Determine configuration of modular component.
Note: If applicable see PEDESTAL instruction or SUPPORT
instruction to better understand the components interaction with
each other and the top.
Perpendicular
Application
Inline Application
Overlay Application
Floating End
Application
2) Install L brackets 3 inches from each end along top of panel using #8 x 5/8 screws.
Place additional L brackets approximately every 12 inches.
3) Attach end of panel per application:
R
Inline Application: Use mending plate pack to attach panels end to end.
R
Perpendicular Application (Recessed Modesty/Back Panels): 8VH³/´%UDFNHWVDQG[´6FUHZVWRDWWDFKDQGVXSSRUW
panels perpendicular to one another.
R
Overlay Applications: Use #8 x 1-´VFUHZVWKURXJKWKHEDFNRIDSHGHVWDOLQWRWKHEDFNVLGHRIWKH0RGHVW\%DFN3DQHO
to attach.
R
Floating End Applications: The floating end of panels will have no attachent, however the other end of the panel should
be connected using one of the methods defined above.
INST000004
Rev A
(8/15)
continued on next page
45
INSTALLATION
MODESTY/BACK PANEL
INST000004
Installation (Glide):
Installation
1) Place Glide in pre-PDGHKROHDQGIDVWHQXVLQJ[´VFUHZVSURYLGHG
Adjustment
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
46
INST000004
Rev A
(8/15)
INSTALLATION
INST000005
PEDESTAL
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
[´3K3DQ+HDG6FUHZ05452)
Edge Grommet
(03471)
Level
#8 x 1-´3K)ODW+HDG6FUHZ05410)
47
ò´2SHQ(QG:UHQFK
Purpose:
To locate and attach modular pedestal to unit.
Installation (Pedestal):
Warning: Maximum unsupported span should not exceed 48´.
Must add Modesty Panel or U-Channel Support.
1) Determine configuration of modular component.
Note: If applicable see MODESTY-BACK PANEL instruction or
SUPPORT instruction to better understand the components
interaction with each other and the top.
Desk/Credenza
(single pedestal)
Desk/Credenza
(double pedestal)
Desk/Credenza w/
False Pedestal
Return
2) Lay top, with bottom up, on scratch free surface.
3) If unit has drawers, refer to Drawer Removal Instructions
and remove drawers.
4) Position Pedestal onto top as shown. Ensure front edge
of pedestal is 1´ away from front edge of top and
pedestal grommet is flush with side of top.
Position Pedestal
5) Use the #2 Phillips driver to install 1-´VFUHZVWKURXJK
pedestals cross members into top.
6) Use the #2 3KLOOLSVGULYHUWRLQVWDOO´VFUHZVWKURXJK/
brackets on pedestal into top.
Attach Pedestal
INST000005
Rev A
(8/15)
continued on next page
INSTALLATION
INST000005
PEDESTAL
Installation (Hinged Door):
Side-To-Side Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Side-To-Side
48
Front-To-Back Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate black hinge adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Front-To-Back
Up-Or-Down Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door down or counterclockwise to adjust door
up.
Up -or- Down
Hinged Door Removal
1) Open door and press down the small tab behind the hinge.
2) Pull door from cabinet.
Hinged Door Re-install
1) Hold door back up to cabinet so that the hinges are lined up with the mounting
plates.
2) Place the near side of the hinge into position first.
3) Press the side of the hinge into the bracket.
INST000005
Rev A
(8/15)
continued on next page
INSTALLATION
INST000005
PEDESTAL
Installation (Drawer):
Lateral File Drawer Removal
1) Completely open drawer.
2) On each drawer slide, locate two screws next to drawer retaining
tab. Use the Phillips screw driver to remove screws.
3) On each side of drawer, press in on drawer retaining tabs and lift
up on drawer front. Set drawer aside.
49
Lateral File Drawer Install
1) Fully extend drawer tracks before installing.
2) Slide back of drawer rail into drawer slide retaining hook.
3) Push down to snap into place.
Align drawer slide and retaining hook
Pedestal Drawer Removal
1) Completely open drawer.
2) Locate plastic levers on side of each slide. Push plastic levers
(down on right side/up on left side) and slide drawer free of
pedestal. Set drawer aside.
Pedestal Drawer Install
1) Pull pedestal portion of slides out evenly and slide bearing race to
front of track.
2) Insert drawer portion of slide into pedestal portion of slide and
push in.
3) Carefully open and close until drawer works freely.
Installation (Glide):
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
INST000005
Rev A
(8/15)
INSTALLATION
INST000007
CENTER DRAWER
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#10 x 3/4” Ph. Pan Head Screw (05472)
#2 Philips Driver
50
#6 x 7/16 Ph. Pan Head Screw (05401)
Tape Measure
Purpose:
To locate and attach center drawer to unit.
Installation:
1) Slide tracks forward to mate up with the back of the drawer front as
shown.
2) Position drawer in center of opening and set back 1/4" from edge of top.
3) Attach using using #8 x 5/8” screws provided.
4) Check alignment of drawer and adjust if required. Install remainder of #6
screws through slide into drawer to secure.
INST000007
Rev A
(8/15)
INSTALLATION
INST000006
DOOR-DRAWER MANAGEMENT
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
& Flat Driver
Philips Head Screws (Size Varies)
Purpose:
To adjust doors or drawers for unit installation or adjustment.
51
Installation (Hinged Door):
Side-To-Side Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Side-To-Side
Front-To-Back Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate black hinge adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Front-To-Back
Up-Or-Down Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door down or counterclockwise to adjust door
up.
Up -or- Down
continued on next page
INSTALLATION
INST000006
DOOR-DRAWER MANAGEMENT
Hinged Door Removal
1) Open door and press down the small tab behind the hinge.
2) Pull door from cabinet.
Hinged Door Re-install
1) Hold door back up to cabinet so that the hinges are lined up with the mounting
plates.
2) Place the near side of the hinge into position first.
3) Press the side of the hinge into the bracket.
52
Installation (Sliding Door):
Adjustment
1) Locate Sliding Door Guides on the back of door (Upper & Lower Guides).
2) Ensure that the upper guide is fully engaged in the top position.
- If it is in the top position go on to step 3.
- If it is not in the top position then using your finger push in,
and then up the switch until it reaches the top position.
3) On the Lower Guide use a Flat head screw driver to turn red adjustment screw.
4) Ensure that the door now slides freely.
Removal
1) Locate Upper Guides.
2) Disengage Guide by pushing switch in and then down with your finger.
(Remember to do both Upper Guides)
3) Using your hands grab the sliding door pulling top out towards you.
Then lift the door out.
4) Reverse Process to reinstall door.
INST000006
Rev A
(8/15)
continued on next page
INSTALLATION
DOOR-DRAWER MANAGEMENT
INST000006
Installation (Drawer):
Lateral File Drawer Removal
1) Completely open drawer.
2) On each drawer slide, locate two screws next to drawer retaining
tab. Use the Phillips screw driver to remove screws.
3) On each side of drawer, press in on drawer retaining tabs and lift
up on drawer front. Set drawer aside.
53
Lateral File Drawer Install
1) Fully extend drawer tracks before installing.
2) Slide back of drawer rail into drawer slide retaining hook.
3) Push down to snap into place.
Align drawer slide and retaining hook
Pedestal Drawer Removal
1) Completely open drawer.
2) Locate plastic levers on side of each slide. Push plastic levers
(down on right side/up on left side) and slide drawer free of
pedestal. Set drawer aside.
Pedestal Drawer Install
1) Pull pedestal portion of slides out evenly and slide bearing race to
front of track.
2) Insert drawer portion of slide into pedestal portion of slide and
push in.
3) Carefully open and close until drawer works freely.
INST000006
Rev A
(8/15)
INSTALLATION
INST000008
MODESTY PANEL HINGED
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
Measure
Tape
[´3K3DQ+HDG6FUHZ05452)
54
Level
ò´2SHQ(QG
Wrench
2x2 Hinge (045041)
Purpose:
To attach Panel Modesty Hinged to top.
Installation (Hinged Modesty):
1) Attach hinge 3 inches from each end along top of modesty panel
using #8 x 5/8 screws. Place remaining hinges evenly spaced
between end hinges.
Attach Hinges
2) 3RVLWLRQPRGHVW\SDQHODQGDWWDFKZLWK´SDQKHDGVFUHZV
Attach Hinged Panel to Top
Installation (Glide):
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
INST000008
Rev A
(8/15)
INSTALLATION
INST000009
RETURN-BRIDGECONFERENCE APPLICATION
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
#10 x 3´3KPan Head Screw (05472)
Tape Measure
Flat Plate ´25´
ò´2SHQ(QG:UHQFK
Glide (2200321100)
[´3K)ODW+HDG6FUHZ
Purpose:
To locate and attach flat plates and to level unit to insure proper
door/drawer function, as well as alignment of adjoining units.
Flat Plate
Glide
Flat Plate Installation:
Warning: 0D[LPXPXQVXSSRUWHGVSDQVKRXOGQRWH[FHHG´
Must add Modesty Panel or U-Channel Support.
1) Identify intended layout/application of units.
Note: Units may be ordered as modular components or assembled
units.
Assemble modular components as intended before
attaching flat plates. Because of the versatility of modular
components, all included plates may not be required for every
application.
Bridge Application
Return Application
Conference Application
Conference Application
2) Locate and attach flat plate as shown. Center plate(s) on joint and filling all holes in
flat plates with screws provided.
Flat Plate Location
INST000009
Rev A
(8/15)
continued on next page
55
INSTALLATION
RETURN-BRIDGECONFERENCE APPLICATION
INST000009
Glide Installation:
Installation
1) Place Glide in pre-PDGHKROHDQGIDVWHQXVLQJ[´VFUHZVSURYLGHG
56
Adjustment
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
INST000009
Rev A
(8/15)
INSTALLATION
INST000010
DOOR & GLIDE LEVELING
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver &
Flat Driver
´2SHQ(QG:UHQch
Phillips Head Screws
(Size Varies)
Glide (2200321100)
57
Level
[´3K)ODW+HDG6FUHZV (05408)
Purpose:
To level unit and doors to insure proper function and alignment of adjoining units.
Installation (Hinged Door):
Side-To-Side Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Side-To-Side
Front-To-Back Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate black hinge adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Front-To-Back
Up-Or-Down Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door down or counterclockwise to adjust door
up.
Up -or- Down
INST000010
Rev A
(8/15)
continued on next page
INSTALLATION
DOOR & GLIDE LEVELING
INST000010
Hinged Door Removal
1) Open door and press down the small tab behind the hinge.
2) Pull door from cabinet.
Hinged Door Re-install
1) Hold door back up to cabinet so that the hinges are lined up with the mounting
plates.
2) Place the near side of the hinge into position first.
3) Press the side of the hinge into the bracket.
58
Installation (Sliding Door):
Adjustment
1) Locate Sliding Door Guides on the back of door (Upper & Lower Guides).
2) Ensure that the upper guide is fully engaged in the top position.
- If it is in the top position go on to step 3.
- If it is not in the top position then using your finger push in,
and then up the switch until it reaches the top position.
3) On the Lower Guide use a Flat head screw driver to turn red adjustment screw.
4) Ensure that the door now slides freely.
Removal
1) Locate Upper Guides.
2) Disengage Guide by pushing switch in and then down with your finger.
(Remember to do both Upper Guides)
3) Using your hands grab the sliding door pulling top out towards you.
Then lift the door out.
4) Reverse Process to reinstall door.
INST000010
Rev A
(8/15)
continued on next page
INSTALLATION
DOOR & GLIDE LEVELING
INST000010
Installation (Glide):
Installation
1) Place Glide in pre-PDGHKROHDQGIDVWHQXVLQJ[´VFUHZVSURYLGHG
Adjustment
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
59
INST000010
Rev A
(8/15)
INSTALLATION
INST000011
STACKING UNIT
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
Mending Plate Pack (03455)
60
Purpose:
To attach and secure Stacking Unit to lower unit.
Stacking Unit
Installation:
1) Attach 2 felt pads on bottom of each end panel. Attach the remainder
evenly spaced on back panel.
2) Position stacking unit onto lower unit. Stacking unit should be flush at
rear and be centered from side-to-side.
3) Attach mending bracket to back of the unit using screws provided.
INST000011
Rev A
(8/15)
INSTALLATION
STACKING UNIT W/DOORS
INST000012
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
& Flat Driver
Mending Plate Pack (03455)
61
Purpose:
To attach Modesty/Back panel to modular component.
Stacking Unit
w/Doors
Installation (Stacking Unit):
1) Attach 2 felt pads on bottom of each end panel. Attach the remainder
evenly spaced on back panel.
2) Position stacking unit onto lower unit. Stacking unit should be flush at
rear and be centered from side-to-side.
3) Attach mending bracket to back of the unit using screws provided.
INST000012
Rev A
(8/15)
continued on next page
INSTALLATION
INST000012
STACKING UNIT W/DOORS
Installation (Hinged Door):
Side-To-Side Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Side-To-Side
62
Front-To-Back Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate black hinge adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Front-To-Back
Up-Or-Down Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door down or counterclockwise to adjust door
up.
Up -or- Down
Hinged Door Removal
1) Open door and press down the small tab behind the hinge.
2) Pull door from cabinet.
Hinged Door Re-install
1) Hold door back up to cabinet so that the hinges are lined up with the mounting
plates.
2) Place the near side of the hinge into position first.
3) Press the side of the hinge into the bracket.
INST000012
Rev A
(8/15)
continued on next page
INSTALLATION
STACKING UNIT W/DOORS
INST000012
Installation (Sliding Door):
Adjustment
1) Locate Sliding Door Guides on the back of door (Upper & Lower Guides).
2) Ensure that the upper guide is fully engaged in the top position.
- If it is in the top position go on to step 3.
- If it is not in the top position then using your finger push in,
and then up the switch until it reaches the top position.
3) On the Lower Guide use a Flat head screw driver to turn red adjustment screw.
4) Ensure that the door now slides freely.
Removal
1) Locate Upper Guides.
2) Disengage Guide by pushing switch in and then down with your finger.
(Remember to do both Upper Guides)
3) Using your hands grab the sliding door pulling top out towards you.
Then lift the door out.
4) Reverse Process to reinstall door.
INST000012
Rev A
(8/15)
63
INSTALLATION
INST000013
HANGING UNIT
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
Mounting Rail
Level
64
Mallet
Suspension Kit
(SK1600)
(42034)
Tape Measure
Drill
Additional fasteners required. Licensed Installer
must determine appropriate fastener for application
Purpose:
To mount and secure Hanging Unit.
Installation (With Mounting Rail):
WARNING: An improperly installed hanging unit can fall resulting in severe injury to yourself or
others. A contractor or another licensed individual must install hanging unit.
1) Locate and attach mounting bracket(s) on a structural wall using appropriate fasteners
and quantities.
STANDARD CABINET- 5HTXLUHVRQHPRXQWLQJUDLO/RFDWHG´IURP%27720RI
bracket to floor.
TALL CABINET- 5HTXLUHVWZRPRXQWLQJUDLOV/RZHUUDLOLVORFDWHG´IURP723
RIEUDFNHWWRIORRU8SSHUUDLOLVORFDWHG´IURP723RIEUDFNHWWRIORRU
STANDARD
NOTE: Appropriate fastener and quantities must be determined and provided by
licensed installer. Hanging unit must be mounted on structural wall members.
TALL
2) Position wall cabinet onto mounting rail. Use rubber mallet to tap down on top rear
edge of cabinets to ensure mounting rails and plates are fully engaged.
INST000013
Rev A
(8/15)
continued on next page
INSTALLATION
INST000013
HANGING UNIT
Installation (With Suspension Kit):
WARNING: An improperly installed hanging unit can fall resulting in severe injury to
yourself or others. A contractor or another licensed individual must install hanging unit.
1) Determine the options you plan to install.
Option 1- Suspension kit used to connect hanging unit to cabinets on both sides.
NOTE: This will require two suspension kits.
Option 2- Suspension kit used to connect hanging unit to a cabinet on one side,
and the other side is supported by a paper storage support.
NOTE: Reference paper storage support instruction first.
OPTION 1
65
OPTION 2
2) Align the plate flush with the top and back of the cabinet, in correct orientation,
the holes are closer to the top side of the plate. And mark hole location.
3) Now use the plate in the same manner to mark hole position on the hanging unit.
4) 'ULOO´KROHVZKHUH\RXPDUNHG
5) While the cabinet is held into position insert fasteners and tighten.
NOTE: Requires more than one person to do this step safely.
INST000013
Rev A
(8/15)
continued on next page
INSTALLATION
INST000013
HANGING UNIT
NOTICE: Both upper and lower rails must be fastened to wall studs or anchored appropriately.
HANGING UNIT MOUNTING
A contractor or another licensed individual must install wall assembly components.
Wall Construction must comply with local building code:
The following website is a great resource for building codes.
http://www.cmdgroup.com/building-codes
66
Wall Assemblies must be mounted on structural walls. In new construction, wood blocking or similar material is
recommended for ease of installation.
The suggested fasteners by wall type include:
Drywall, Wood Studs
#10-´3DQ+HDGWood Screw
Drywall, Steel Studs
1/4-20 Toggle Bolt or Molly Screw Anchor
Drywall, Steel Studs
1/4-20 Toggle Bolt and/or Wedge Anchor
Solid Brick
1/4-20 Wedge Anchor or Similar
Solid Concrete
1/4-20 Wedge Anchor or Similar
INST000013
Rev A
(8/15)
INSTALLATION
INST000014
HANGING UNIT W/DOORS
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
Mounting Rail
Level
Mallet
Suspension Kit
(SK1600)
(42034)
Tape Measure
Drill
Additional fasteners required. Licensed Installer
must determine appropriate fastener for application
#2 Phillips Driver
Purpose:
To mount and secure Hanging Unit.
Installation (With Mounting Rail):
WARNING: An improperly installed hanging unit can fall resulting in severe injury to yourself or
others. A contractor or another licensed individual must install hanging unit.
1) Locate and attach mounting bracket(s) on a structural wall using appropriate fasteners
and quantities.
STANDARD CABINET- 5HTXLUHVRQHPRXQWLQJUDLO/RFDWHG´IURP%27720RI
bracket to floor.
TALL CABINET- 5HTXLUHVWZRPRXQWLQJUDLOV/RZHUUDLOLVORFDWHG´IURP723
RIEUDFNHWWRIORRU8SSHUUDLOLVORFDWHG´IURP723RIEUDFNHWWRIORRU
STANDARD
NOTE: Appropriate fastener and quantities must be determined and provided by
licensed installer. Hanging unit must be mounted on structural wall members.
TALL
2) Position wall cabinet onto mounting rail. Use rubber mallet to tap down on top rear
edge of cabinets to ensure mounting rails and plates are fully engaged.
INST000014
Rev A
(8/15)
continued on next page
67
INSTALLATION
HANGING UNIT W/DOORS
INST000014
Installation (With Suspension Kit):
WARNING: An improperly installed hanging unit can fall resulting in severe injury to
yourself or others. A contractor or another licensed individual must install hanging unit.
1) Determine the options you plan to install.
Option 1- Suspension kit used to connect hanging unit to cabinets on both sides.
NOTE: This will require two suspension kits.
Option 2- Suspension kit used to connect hanging unit to a cabinet on one side,
and the other side is supported by a paper storage support.
NOTE: Reference paper storage support instruction first.
OPTION 1
68
OPTION 2
2) Align the plate flush with the top and back of the cabinet, in correct orientation,
the holes are closer to the top side of the plate. And mark hole location.
3) Now use the plate in the same manner to mark hole position on the hanging unit.
4) 'ULOO´KROHVZKHUH\RXPDUNHG
5) While the cabinet is held into position insert fasteners and tighten.
NOTE: Requires more than one person to do this step safely.
INST000014
Rev A
(8/15)
continued on next page
INSTALLATION
INST000014
HANGING UNIT W/DOORS
NOTICE: Both upper and lower rails must be fastened to wall studs or anchored appropriately.
HANGING UNIT MOUNTING
A contractor or another licensed individual must install wall assembly components.
Wall Construction must comply with local building code:
The following website is a great resource for building codes.
http://www.cmdgroup.com/building-codes
Wall Assemblies must be mounted on structural walls. In new construction, wood blocking or similar material is
recommended for ease of installation.
The suggested fasteners by wall type include:
Drywall, Wood Studs
#10-´3DQ+HDGWood Screw
Drywall, Steel Studs
1/4-20 Toggle Bolt or Molly Screw Anchor
Drywall, Steel Studs
1/4-20 Toggle Bolt and/or Wedge Anchor
Solid Brick
1/4-20 Wedge Anchor or Similar
Solid Concrete
1/4-20 Wedge Anchor or Similar
Installation (Hinged Door):
Side-To-Side Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Side-To-Side
Front-To-Back Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate black hinge adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door out or counterclockwise to adjust door in.
Front-To-Back
Up-Or-Down Door Hinge Adjustment Instructions
1) Fully open cabinet door.
2) Locate door adjustment screw on door hinge assembly.
3) Use the Phillips screwdriver to adjust door alignment screw.
4) Turn screw clockwise to adjust door down or counterclockwise to adjust door
up.
Up -or- Down
INST000014
Rev A
(8/15)
continued on next page
69
INSTALLATION
HANGING UNIT W/DOORS
INST000014
Hinged Door Removal
1) Open door and press down the small tab behind the hinge.
2) Pull door from cabinet.
Hinged Door Re-install
1) Hold door back up to cabinet so that the hinges are lined up with the mounting
plates.
2) Place the near side of the hinge into position first.
3) Press the side of the hinge into the bracket.
70
Installation (Sliding Door):
Adjustment
1) Locate Sliding Door Guides on the back of door (Upper & Lower Guides).
2) Ensure that the upper guide is fully engaged in the top position.
- If it is in the top position go on to step 3.
- If it is not in the top position then using your finger push in,
and then up the switch until it reaches the top position.
3) On the Lower Guide use a Flat head screw driver to turn red adjustment screw.
4) Ensure that the door now slides freely.
Removal
1) Locate Upper Guides.
2) Disengage Guide by pushing switch in and then down with your finger.
(Remember to do both Upper Guides)
3) Using your hands grab the sliding door pulling top out towards you.
Then lift the door out.
4) Reverse Process to reinstall door.
INST000014
Rev A
(8/15)
INSTALLATION
INST000015
BRIDGE W HINGED MODESTY
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
Tape Measure
[´3K3DQ+HDG6FUHZ
2x2 Hinge (045041)
[´3K3DQ+HDG6FUHZ05472)
)ODW3ODWH´
(2000037043) OR
Flat Plate ´
(0000257643)
ò´2SHQ(QG:UHQFK
Level
Purpose:
To locate and attach flat plates on Bridge, and to attach hinged panel modesty to a bridge top.
Bridge Application
Installation (Flat Plate):
1) Locate and attach flat plate as shown. Center plate(s) on joint and filling all holes in flat
plates with #10 x 3/4" screws provided.
Flat Plate Location
Installation (Hinged Modesty):
1) Attach hinge 3 inches from each end along top of modesty panel. Place remaining
hinges evenly spaced between end hinges.
Attach Hinges
2) Position modesty panel and attach with #8 [´SDQKHDGVFUHZV
Attach Hinged Panel to
Top
INST000015
Rev A
(8/15)
continued on next page
71
INSTALLATION
BRIDGE W HINGED MODESTY
INST000015
Installation (Glide):
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
72
INST000015
Rev A
(8/15)
INSTALLATION
INST000017
ACRYLIC MODESTY PANEL
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#8 x 5/8” Ph. Pan Head Screw (05452)
#2 Phillips Driver
Purpose:
Position and Attach Acrylic Modesty to Top
73
Installation:
1) Position Acrylic Modesty Panel so that the front of the metal
bracket is offset 2 ¼” from the front of the top, and is centered
between supports.
2) Attach Acrylic Modesty Panel using #8 x 5/8” screws provided.
INST000017
Rev A
(8/15)
INSTALLATION
INST000016
SUPPORT
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
L Bracket (05151)
Cam (10476)
74
1/2” Open End Wrench
#8 x 5/8” Ph. Pan Head Screw
Mini Fix (10475)
(05452)
Level
Purpose:
To locate and attach Support.
Installation (Support):
Warning: Maximum unsupported span should not exceed
48”. Must add Modesty Panel or U-Channel Support.
1) Determine Layout
Note: If applicable see PEDESTAL instruction or
MODESTY/BACK PANEL instruction to better understand
the components interaction with each other and the top.
2) Insert mini fix studs using a Phillips screw driver.
3) Assemble the T/L/False Pedestal Supports by
inserting the cams into the adjoining panel. Insert
stud into cams. Secure the cams by rotating 180
degrees.
INST000016
Rev A
(8/15)
continued on next page
INSTALLATION
INST000016
SUPPORT
4) Fasten the L brackets on the proper side of the adjoining panel with the #8 x 5/8” pan head screws.
False Pedestal
T-Support
Straight
L-Support
75
5) Position Support
End application: Locate support flush w/ end and user
edge.
Mid application: Locate support as required.
Flush
Note: Unsupported spans greater than 48” must have
support added.
End Application
Mid Application
6) Attach using #8 x 5/8” screws to fasten other half of L
brackets of support assembly to the top.
Installation (Glide):
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
INST000016
Rev A
(8/15)
INSTALLATION
INST000018
FILLER BOX
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Phillips Driver
Cam (10476)
L Bracket (05151)
Edge Grommet
(03471)
76
Mini Fix (10475)
Tape Measure
#8 x 5/8” Ph. Pan
Head Screw (05452)
Dowel (02975)
Double Sided Tape (0800530350)
Purpose:
To assemble and attach filler box to modular unit.
Installation:
Warning: Maximum unsupported span should not exceed 48”. Must add
Modesty Panel or U-Channel Support.
Determining Layout
1) Determine the width of your upper top and then pick the rail best suited
for the top.
- 24” upper top uses 20” rail
- 30” or 36” upper top uses 25” rail
2) Looking at the top of the lower unit determine the best configuration for
the inner rails, allowing access to grommets. There is an outer and
inner attach point on the main rail for the inner rails.
3) At this point you should have determined which outside rail is needed
and which inner rail positions need to be used also. Now move onto the
assembly instructions on the next page.
INST000018
Rev A
(8/15)
continued on next page
INSTALLATION
INST000018
FILLER BOX
Assembly
1) Place L brackets 2 1/2” from each side edge on the two inner rails, and
attach L brackets to the two inner rails using #8 x 5/8” screws provided.
2) On the holes for the inner rail option you chose, insert mini fix studs
using a Phillips screw driver into the top and bottom holes.
3) Now fill the middle hole between the mini fix studs from above with a
wood dowel.
4) Place the inner rails on the mini fix studs and dowels so that the main
rail and inner rails are now connected.
77
5) Insert cams into the holes on the side of the inner rails, and turn them
into the closed position using a Phillips screw driver.
6) Place double sided tape on the underside of all the rails. And finish off
assembly by inserting edge grommets.
Attachment
1) Lay top face down on soft surface to prevent scratching.
2) Position filler box with L brackets down on the underneath side of the
top, 2 1/2” from the short edge of top, and centered between the long
edges.
3) Attach through the L brackets into the top using #8 x 5/8” screws
provided.
4) Remove wax paper from double sided tape. Be aware tape is hard to
reposition once down, be sure of position before placing on top of lower
unit.
5) With help from at least one other person flip top over and place onto
lower unit in user specified location.
NOTE: Before step five it is recommended that you attach support to
the opposite side while top is still able to be down. Reference instruction
sheet for other support to be used. Do not leave opposite side
unsupported after step five is complete.
INST000018
Rev A
(8/15)
INSTALLATION
INST000019
FILLER PANEL
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Phillips Driver
Tape Measure
L Bracket (05151)
#8 x 5/8” Ph. Pan
(05452)
78
Level
½” Open End
Wrench
Purpose:
To attach filler panel to modular unit.
Installation (Filler Panel):
1) Using the first Illustration to the right as a guide, position the top of the
bottom L Bracket approximately 5” from the bottom of the Filler Panel.
Position the top of the middle L Bracket approximately 14” from the bottom of
the Filler Panel. Position the top of the top L Bracket approximately 4” from
the TOP of the Filler Panel.
-NOTE: Beware of Cam and MiniFix Position in back panel of unit to be
attached to.
2) Attach the L Brackets to the Filler Panel using the #8 x 5/8” screws provided.
3) Place the Filler Panel into position on the modular unit. Ensure that the Filler
Panel is flush with the unit, both on the TOP EDGE and SIDE.
4) Keeping the Filler Panel flush, attach the other side of the L Brackets using
the #8 x 5/8” screws provided.
INST000019
Rev A
(8/15)
continued on next page
INSTALLATION
INST000019
FILLER PANEL
Installation (Glide):
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
79
INST000019
Rev A
(8/15)
INSTALLATION
INST000020
O LEG/H LEG
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:Hardware:
#2 Phillips Driver
80
½” Open End
Wrench
#8 x 1” Ph. Pan Head Screw (05423)
Level
Purpose:
To attach (O Leg/ H Leg) to unit.
Installation (O/H Leg):
Warning: Maximum unsupported span should not exceed 48”. Must add Modesty
Panel or U-Channel Support.
1) Lay top face down on soft surface to prevent scratching.
2) Align leg so that the outside of the leg bracket is offset 1/8” from the side
edge of the top. Also align the front of the leg so that it is offset 1/8” from
the front edge of the top.
Front
Side
3) Attach leg to top using #8 x 1” screws provided.
NOTE- Not all holes will be used. The picture below shows the holes that
are recommended for use.
INST000020
Rev A
(8/15)
continued on next page
INSTALLATION
INST000020
O LEG/H LEG
Installation (Glide):
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
81
INST000020
Rev A
(8/15)
INSTALLATION
INST000021
ACRYLIC PRIVACY
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
Tape Measure
Privacy Screen
Bracket (40215)
82
Purpose:
To attach Acrylic Privacy to top.
Installation:
1) Place the privacy screen brackets on the acrylic privacy panel in the pre cut
slots. Place the brackets so that the longer side is up and the smaller side is
down like the second picture to the right.
2) Center the acrylic privacy on the back of the unit with the brackets on the
underside of the desk top.
3) Attach using #10 x 3/4” screws provided.
INST000021
Rev A
(8/15)
#10 x 3/4” Ph. Pan Head
Screw (05472)
INSTALLATION
INST000022
PAPER STORAGE SUPPORT
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
# 8 x 3/4” Ph. Flat Head Screw (05407)
#2 Philips Driver
83
Double Sided Tape (0800530350)
Purpose:
To attach paper storage support to modular unit.
Installation:
1) Cut and place double sided tape on the contact surface on
the bottom of the metal support. And remove wax paper
exposing adhesive.
NOTE: Tape is very sticky and hard to remove once in place,
be cautious of this as you continue install.
2) Place the top of the metal support on the bottom of the unit
so that the back and side edges are flush.
3) Attach metal support with #8 x 3/4” screws provided.
WARNING: Hanging cabinet must be attached to wall, or
adjacent cabinet with P-SK1600 Suspension Kit. For
instructions on installing the hanging cabinet portion see
Hanging Unit Installation Sheet.
INST000022
Rev A
(8/15)
INSTALLATION
INST000023
METAL SUPPORT LEG
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#8 x 1” Ph. Pan Head Screw (05423)
#2 Philips Driver
Tape Measure
84
Purpose:
To attach metal support legs to modular unit.
Installation:
Warning: Maximum unsupported span should not exceed 48”. Must
add Modesty Panel or U-Channel Support.
1) Lay top face down on soft surface to prevent scratching.
2) Place support legs down so that they are 3 1/2” from the edge
in both directions.
NOTE: For tops with curves, think of an imaginary line from
the corner where the curve starts, and measure off that.
Graphics to the right demonstrate this.
3) Attach support legs using #8 x 1” screws provided.
NOTE: Use the countersunk holes only. There will be three
non countersunk holes not used.
4) With the help of at least one other person flip top over and
place support legs on lower unit in the users designated
position.
NOTE: Before step four it is recommended that you attach
support to the opposite side while top is still able to be down.
Reference instruction sheet for other support to be used. Do
not leave opposite side unsupported after step four is
complete.
INST000023
Rev A
(8/15)
INSTALLATION
INST000024
LEG KITS
Important:
x Read all instructions and review instructions before installation of unit.
x Proper Product Installation is the responsibility of the installing agent.
x Questions? Please call Paoli Customer Service Team 800.457.7415. Visit Paoli.com
Tools:
Hardware:
#2 Philips Driver
Tape Measure
Level
[´3K3DQ+HDG6FUHZ
ò´2SHQ(QG:UHQFK
85
Purpose:
To attach legs to modular unit.
Installation (Metal Leg):
Warning: 0D[LPXPXQVXSSRUWHGVSDQVKRXOGQRWH[FHHG´0XVW
add Modesty Panel or U-Channel Support.
1) Lay top face down on soft surface to prevent scratching.
2) Place OHJV GRZQ LQ WKH FRUQHUV VR WKDW WKH\ DUH RIIVHW E\ ´
from both edges.
3) Attach OHJVXVLQJ[´VFUHZVSURYLGHG
NOTE: Use the countersunk holes only. There will be three non
countersunk holes not used.
Installation (Glide):
1) Adjust leveling glides to level unit. Use level and open ended wrench to make all
glides touch with even pressure. (side-to-side and front-to-back)
INST000024
Rev A
(8/15)