H14/17 - Melbourne (YMML) Method of Working Plan 2014-1

TELEPHONE:
1300-306-630
(local call - Aust wide,
except from mobile
phone)
Fax: 02 6268 5111
AUSTRALIA
AERONAUTICAL INFORMATION
SERVICE
AIC
AIRSERVICES AUSTRALIA
GPO BOX 367
CANBERRA ACT 2601
H14/17
Email: [email protected]
Effective: 201705050600 UTC
MELBOURNE (YMML) METHOD OF
WORKING PLAN 2014-1: TAXIWAY
VICTOR SOUTH PROJECT
1.
INTRODUCTION
1.2
Taxiway Alpha between Taxiway Golf and Taxiway Juliet is
restricted to Aircraft Code C (Max Wing Span 36m) from January
2017 to June 2017.
1.3
Rapid Exit Taxiway Golf between Runway 16/34 and Taxiway
Victor is restricted to Aircraft Code C (Max Wing Span 36m) from
January 2017 to June 2017.
1.4
A NOTAM has been published advising of the restrictions to
Taxiway Alpha and Rapid Exit Taxiway Golf.
1.5
All works associated with this MOWP are expected to be
completed by June 2017
2.
BACKGROUND
1.1
2.1
The purpose of this AIC Supplement is to notify pilots of the
restrictions to Taxiway Alpha and Rapid Exit Taxiway Golf during
planned works as part of YMML Method of Working Plan
(MOWP) 2014-1 Taxiway Victor South Project.
Melbourne Airport has published MOWP 2014-1 which details
each Stage of Works and associated Operational and Aircraft
restrictions. A copy of the MOWP is available at:
http://melbourneairport.com.au/for-business/onsite-at-melair/
method-of-working-plans-current.html
(AIC H14/17)
Page 2 of 4
2.2
The works will comprise an extension of Taxiway Victor to the south
from Taxiway Golf to Taxiway Juliet and also include an extension of
Taxiway Yankee from Taxiway Alpha to connect to the extension of
Taxiway Victor.
3.
OPERATIONAL INFORMATION
3.1
To assist pilots navigating around the works areas, Melbourne Airport
have implemented the following:

The painting of “Max Wingspan 36m” markings within the
taxiway intersections of:
 Twy Golf & Twy Alpha and
 Twy Juliet & Twy Alpha

The installation of 2 x Electronic Variable Messaging Boards
located within the works area at each end of Taxiway Alpha
advising of the restriction of Taxiway Alpha to 36m Wingspan.

For Runway 16 arrivals - ATC will give directed transmissions to
pilots of aircraft with a wingspan above 36m:

Runway exit instructions i.e. “VACATE AT TAXIWAY JULIET”
or

“RAPID EXIT GOLF NOT AVAILABLE”

ATIS advising that Rapid Exit Taxiway Golf is not available to
aircraft with a wingspan greater than 36m.
Page 3 of 4
4.
AERODROME DIAGRAM
(AIC H14/17)
(AIC H14/17)
5.
Page 4 of 4
MORE INFORMATION
5.1
For further information, contact:
Marc Storti
Email: [email protected]
6.
CANCELLATION
7.
DISTRIBUTION
6.1
7.1
This AIC will remain current until all works associated with the
Taxiway Alpha and Rapid Exit Taxiway operational restrictions are
completed, expected June 2017.
By Airservices Australia website only.