4
5
8
7
6
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF MicroE Systems Corp. AND SHALL
NOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE
OF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM MicroE Systems Corp.
3
2
LTR
ECO
S3
----
4
5
A
DIRECTION "A"
C
6.
D
REFERENCE MARKER
REGION
5.
8.30
1
REVISIONS
APPROVED
DATE
DESCRIPTION
10/18/06
INITIAL
1969
INDEX LIMIT LENGTH WAS 20mm. CHANGED TO 16mm. SEE ECO 2/11/08
3/14/08
1985 SENSOR HEIGHT 6.6 WAS 6.63, CABLE LENGTH 37.1 WAS 26.0
2031 NO CHANGES. RELEASE TO PRODUCTION
9/9/08
D
MF
MF
VB
VB
C
D
C1
2.8
CABLE DIAMETER
6.75
6.00
TAPE SCALE SHOWN IN THIS VIEW TRANSLATED IN X-AXIS
OUT OF OPERATING RANGE FOR CLARITIY
B
C
2.62
A
27.00
B1
B2
22.86
3.84
2.50
B
6.6
3.84
4X R2.79
A
C
SENSOR MOUNTING SURFACE
9.00±0.076
TAPE SCALE MOUNTING SURFACE
14.25
2.03
3.38
2.07
27.00±0.076
M2.5 OR 2-56UNC-2B
THRU. 2X
0.29
METAL TAPE SCALE
ADHESIVE BACKING
(TAPE SCALE MOUNTING SURFACE)
27.00
13.70
SENSOR MOUNTING PLATE RECOMMENDATION
4X R2.39
37.1
5.0
B
4.1
2.50
4X R0.76
4.75
B
2.24
B
9.00
7.2
13.49
3.5
SS SLEEVE
NOTES:
1. RECOMMENDED MOUNTING HARDWARE:
2-56 or M2.5 SCREWS
KEY
2. IF BENCHING PINS ARE TO BE USED, PINS MUST BE PLACED ALONG
DATUM EDGES OF SENSOR FOR PROPER ALIGNMENT.
(REFERENCE DATUMS B1, B2, AND C1).
A
OPTICAL CL
21.59
CABLE LENGTH
+.013M/-.0
2X
2.79 THRU.
C
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN MILLIMETERS
DIM. APPLY AFTER PROCESSING
4. RECOMMENDED SENSOR MOUNTING PLATE THICKNESS:
MINIMUM: 4 SCREW THREADS
MAXIMUM: ALLOW CLEARANCE TO SCALE AND SCALE MOUNTING HARDWARE
(BENCHING SURFACES, TRENCHES, ETC.)
Cable Lengths
.5M
1M
3M
5M
5. SEE PAGE 2 FOR DIMENSIONS FOR LOCATIONS OF REFERENCE MARKERS.
6. SEE INTERFACE DRAWING ID-00340 (INTERPOLATOR ELECTRONICS) FOR DIRECTIONALITY.
7
32.00
UNITS: mm
3. HEIGHT OF SENSOR BENCHING PINS MUST BE A MINIMUM OF
4.06mm IN HEIGHT FROM DATUM A.
8
4.95
6
5
4
INTERPRET ALL GEOMETRIC TOLS.
PER ANSI Y14.5M-1994
TOLERANCES ARE:
DECIMALS:
.X ± .25
.XX ± .13
ANGULAR:
30 MIN.
MicroE Systems
DATE
APPROVALS
DRAWN
Division of GSI
9/20/06
S.BUTURLIA
CHECKED
ENGRG.
A.GOLDMAN
9/8/08
MFG ENG
R.BENNETT
9/8/08
A.VILLARROEL
9/9/08
QA
DESCRIPTION:
8 Erie Drive
Natick, MA 01760
INTERFACE, ENCODER, 20um,
TAPE SCALE w/INDEX AND
REFERENCE MARKERS,
MERCURY II SENSOR
SIZE DWG. NO.
B
SCALE:
3
2
REV.
ID-00336
CAD FILE:
1
A
3rd ANGLE
PROJECTION
SHEET
1 OF 3
A
8
7
6
4
5
3
2
1
TAPE SCALE LENGTH (ML + 40mm)
MEASURING LENGTH (ML)
D
D
D
20.00
INDEX MARKER
END CAP
LEFT
LIMIT MARKER
END CAP
13.00
C
C
16.00
26.00
20.00
8.00
B
B
10.40
INDEX MARKER
2.00
2.00
LEFT/RIGHT LIMIT MARKER
END CAP
NOTES:
1. BEFORE PLACING INDEX MARKERS, LIMIT MARKERS, AND END CAPS, REMOVE BLUE PROTECTIVE
FILM FROM TAPE SCALE.
A
UNITS: mm
MicroE Systems
2. NOTE DATUM EDGE OF TAPE SCALE AND REFERENCE MARKER REGION BEFORE APPLYING MARKERS.
Division of GSI
8 Erie Drive
Natick, MA 01760
3. END CAPS, LIMITS AND INDEX MARKERS ARE OPTIONAL (SEE INSTALLATION MANUAL).
DESCRIPTION:
4. LIMIT MARKERS CAN BE PLACED AT ENDS OF TAPE SCALE WHEN END CAPS ARE NOT USED.
5. END CAPS, LIMITS AND INDEX MARKERS SHALL NOT OVERLAP (MAY CAUSE INTERFERENCE WITH SENSOR).
SIZE DWG. NO.
B
6. FOR LONGER OR SHORTER LENGTHS OF MARKERS CALL MICROE SYSTEMS FOR DETAILS.
8
7
6
5
INTERFACE, ENCODER, 20um,
TAPE SCALE w/INDEX AND
REFERENCE MARKERS,
MERCURY II SENSOR
SCALE:
4
3
2
REV.
ID-00336
CAD FILE:
1
A
3rd ANGLE
PROJECTION
SHEET
2 OF 3
A
8
7
4
5
6
3
2
.05/100 F
.05/100 F
.1/100
SCALE BENCHING EDGE
(REFERENCE MARKER SIDE)
1
TEMPORARY
STRAIGHT EDGE
.1/100
.003/10
.003/10
D
D
0.76±0.05
MIN.
9.53
4.18±0.05
SHARP EDGE
REQUIRED.
SEE NOTE 1.
C
TAPE SCALE
MAXIMUM R.13
C
GROOVE DETAIL
+0.10
6.10
0.00
.05
FIGURE 1: INSTALLATION GROOVE
HAND APPLICATION ONLY
F = MACHINE GUIDEWAY
FIGURE 3: INSTALLATION STRAIGHT EDGE
USE WITH TAPE APPLICATOR
.05/100 F
F = MACHINE GUIDEWAY
.1/100
SCALE BENCHING EDGE
(REFERENCE MARKER SIDE)
B
.003/10
0.76±0.05
NOTES:
1. MICROE SYSTEMS RECOMMENDS UTILIZING AN EDGE AS A GUIDE IN ORDER TO MAINTAIN STRAIGHTNESS OF THE SCALE
DURING MOUNTING. THIS EDGE MAY BE TEMPORARY OR PERMANENT AND SHOULD FOLLOW THE APPLICATION GUIDELINES
IN FIGURES 1-3.
B
2. THE TAPE SCALE APPLICATOR TOOL IS RECOMMENDED FOR INSTALLATION OF SCALES AND, IN PARTICULAR, THOSE LONGER
THAN 250 MILLIMETERS. SHORTER SCALES MAY BE APPLIED EITHER BY HAND OR WITH APPLICATOR TOOL.
PLEASE SEE INSTRUCTION MANUAL FOR DETAILS.
3. THE INSTALLATION METHOD SHOWN IN FIGURE 1 SHOULD INVOLVE HAND INSTALLATIONS ONLY. THE APPLICATOR TOOL IS
NOT COMPATIBLE WITH THIS METHOD. IN ADDITION END CAPS CANNOT BE USED WITH THIS METHOD.
4. FOR APPLICATIONS WHERE MACHINING THE MOUNTING SURFACE IS NOT DESIRED, A TEMPORARY STRAIGHTEDGE CAN BE
USED. A STAINLESS STEEL RULE MAY BE USED AS IN FIGURE 2 IF THE RULE MEETS THE THICKNESS REQUIREMENT.
OTHERWISE, THE TEMPORARY STRAIGHTEDGE MAY BE USED AS SHOWN IN FIGURE 3.
5. IN FIGURE 3, THE OUTSIDE REFERENCE SURFACE OF THE TOOL SLIDES AGAINST THE TEMPORARY
EDGE, AND THE TAPE SCALE IS THEREFORE OFFSET FROM THE EDGE AS SHOWN. IF THIS OFFSET
IS TOO SMALL FOR THE APPLICATION, THE CUSTOMER MAY DESIRE TO CREATE A SPACER
THAN CAN ATTACH TO THE OUTSIDE SURFACE OF THE TOOL. PLEASE SEE INSTRUCTION
MANUAL FOR DETAILS.
A
FIGURE 2: INSTALLATION EDGE
USE WITH TAPE APPLICATOR
6. IN FIGURES 1 AND 2, THE SCALE BENCHING EDGE IS INTENDED TO AID THE INSTALLATION
OF REFERENCE MARKERS. FOR APPLICATIONS SUCH AS IN FIGURE 3, THE CUSTOMER
MAY USE A TEMPORARY BENCHING SURFACE TO INSURE THE PROPER INSTALLATION OF
THE REFERENCE MARKERS. PLEASE SEE INSTRUCTION MANUAL FOR DETAILS. THE EDGE
OF THE GROOVE OR STRAIGHTEDGE MUST BE SHARP ON BENCHING SIDE IN ORDER FOR
APPLICATOR TO USE AS A GUIDE. IN ORDER FOR THE TAPE SCALE TO MOUNT CLOSE TO
THIS EDGE, A MAXIMUM RADIUS OF .13 SHOULD BE USED WHERE THE EDGE MEETS THE
BOTTOM OF THE MOUNTING SURFACE.
≥12.00
F = MACHINE GUIDEWAY
8
7
6
5
4
3
2
DESCRIPTION:
UNITS: mm
MicroE Systems
Division of GSI
8 Erie Drive
Natick, MA 01760
INTERFACE, ENCODER, 20um,
TAPE SCALE w/INDEX AND
REFERENCE MARKERS,
MERCURY II SENSOR
SIZE DWG. NO.
B
SCALE:
REV.
ID-00336
CAD FILE:
1
A
3rd ANGLE
PROJECTION
SHEET
3 OF 3
A
8
6
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF MicroE Systems Corp. AND SHALL
NOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE
OF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM MicroE Systems Corp.
DIRECTION "A"
C
D
2
1
LTR
ECO
S2
3
4
A
---INITIAL
1969 INDEX LIMIT MARKER LENGTH WAS 20mm. SEE ECO
1985 SENSOR HEIGHT 6.6 WAS 6.63, CABLE LENGTH 37.1 WAS 26.0
2031 NO CHANGES, RELEASE TO PRODUCTION
C
2.8
CABLE DIAMETER
APPROVED
DATE
DESCRIPTION
D
6.
8.30
3
REVISIONS
REFERENCE MARKER
REGION
7.
4
5
7
10/18/06
2/11/08
3/14/08
9/9/08
MF
MF
VB
VB
C1
D
6.75
6.00
LINEAR SCALE SHOWN IN THIS VIEW TRANSLATED IN X-AXIS
OUT OF OPERATING RANGE FOR CLARITY
B
2.50
B
2.62
4X R2.79
22.86
3.84
27.00
B2
A
B1
6.6
C
9.00±0.076
14.25
C
3.84
A
SENSOR MOUNTING SURFACE
2.07
27.00±0.076
M2.5 OR 2-56UNC-2B
THRU. 2X
SCALE MOUNTING SURFACE
SCALE PATTERN
SURFACE
5.42
SENSOR MOUNTING PLATE RECOMMENDATION
2.49±0.102
2.03
27.00
37.1
5.0
B
4X R2.39
4.1
7.2
13.70
2.50
2.24
4X R0.76
B
B
4.75
13.49
NOTES:
1. RECOMMENDED MOUNTING HARDWARE:
2-56 or M2.5 SCREWS
9.00
3.5
SS SLEEVE
2. IF BENCHING PINS ARE TO BE USED, PINS MUST BE PLACED
ALONG DATUM EDGES OF BOTH THE SENSOR AND THE SCALE
FOR PROPER ALIGNMENT.
(REFERENCE DATUMS B1, B2, AND C1 FOR SENSOR BENCHING PINS).
KEY
2.79 THRU.
4. HEIGHT OF SCALE BENCHING PINS NOT TO EXCEED THE THICKNESS
OF THE SCALE.
ALL DIMENSIONS ARE IN MILLIMETERS
DIM. APPLY AFTER PROCESSING
INTERPRET ALL GEOMETRIC TOLS.
PER ANSI Y14.5M-1994
Cable Lengths
.5M
1M
3M
5M
6. SEE PAGE 2 FOR DIMENSIONS FOR LOCATIONS OF REFERENCE MARKERS.
7. SEE INTERFACE DRAWING ID-00340 (INTERPOLATOR ELECTRONICS) FOR DIRECTIONALITY.
8
7
6
32.00
UNLESS OTHERWISE SPECIFIED
5. RECOMMENDED SENSOR MOUNTING PLATE THICKNESS:
MINIMUM: 4 SCREW THREADS
MAXIMUM: ALLOW CLEARANCE TO SCALE AND SCALE MOUNTING HARDWARE
(BENCHING SURFACES, TRENCHES, ETC.)
5
4.95
21.59
2X
3. HEIGHT OF SENSOR BENCHING PINS MUST BE A MINIMUM OF
4.06mm IN HEIGHT FROM DATUM A.
A
OPTICAL CL
CABLE LENGTH
+0.13M/-.0
4
C
DRAWN
Division of GSI
9/25/06
S.BUTURLIA
CHECKED
ENGRG.
TOLERANCES ARE:
DECIMALS:
ANGULAR:
30 MIN.
.X ± .25
.XX ± .13
UNITS: mm A
MicroE Systems
DATE
APPROVALS
A.GOLDMAN
9/8/08
DESCRIPTION:
INTERFACE, ENCODER, 20um,
SHORT LINEAR SCALE w/INDEX
and REFERENCE MARKERS,
MERCURY II SENSOR
MFG ENG
R.BENNETT
9/8/08
A.VILLARROEL
9/9/08
QA
8 Erie Drive
Natick, MA 01760
SIZE DWG. NO.
B
SCALE:
3
2
REV.
ID-00337
CAD FILE:
1
A
3rd ANGLE
PROJECTION
SHEET
1 OF 2
8
7
6
4
5
3
2
1
SCALE LENGTH (ML + 5mm)
MEASURING LENGTH (ML)
D
D
2.50
INDEX MARKER
D
LEFT
LIMIT MARKER
RIGHT
LIMIT MARKER
C
C
16.00
20.00
8.00
B
2.00
INDEX MARKER
B
2.00
LEFT/RIGHT LIMIT MARKER
NOTES:
1. NOTE DATUM EDGE OF GLASS SCALE AND REFERENCE MARKER REGION BEFORE APPLYING MARKERS.
UNITS: mm
2. LIMITS AND INDEX MARKERS ARE OPTIONAL (SEE INSTALLATION MANUAL).
A
MicroE Systems
Division of GSI
3. LIMITS AND INDEX MARKERS SHALL NOT OVERLAP (MAY CAUSE INTERFERENCE WITH SENSOR).
SCALE IDENTIFICATION AND SIZE.
4. FOR LONGER OR SHORTER LENGTHS OF MARKERS CONTACT MICROE SYSTEMS FOR DETAILS.
5. FOR SHORTER LENGTHS OF LINEAR GLASS THAN 70mm CONTACT MICROE SYSTEMS FOR REQUIREMENTS.
6. LINEAR GLASS SCALES CAN HAVE INDEX AND LIMIT MARKERS PRINTED ON THEM IN LOCATION
DESIRED BY CUSTOMER, CONTACT MICROE SYSTEMS FOR FURTHER DETAILS.
8
7
6
5
4
Scale
Identification
Measuring Length (ML)
Scale Length
MIILXXX
(Min.) MIIL70
(Max.) MIIL130
XXXmm - 5mm
70mm - 5mm = 65mm
130mm - 5mm = 125mm
XXXmm
70mm
130mm
8 Erie Drive
Natick, MA 01760
DESCRIPTION:
3
2
INTERFACE, ENCODER, 20um,
SHORT LINEAR SCALE w/INDEX
and REFERENCE MARKERS,
MERCURY II SENSOR
SIZE DWG. NO.
B
SCALE:
REV.
ID-00337
CAD FILE:
1
A
3rd ANGLE
PROJECTION
SHEET
2 OF 2
A
8
6
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF MicroE Systems Corp. AND SHALL
NOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE
OF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM MicroE Systems Corp.
DIRECTION "A"
C
7.
3
2
1
REVISIONS
LTR
ECO
S2
----
3
4
REFERENCE MARKER
REGION
5.
8.30
D
4
5
7
A
2.8
CABLE DIAMETER
D
1969
1985
APPROVED
DATE
DESCRIPTION
10/18/06
INITIAL
INDEX LIMIT MARKER LENGTH WAS 20mm. SEE ECO
SENSOR HEIGHT 6.6 WAS 6.63, CABLE LENGTH 37.1 WAS 26.0
MF
2/11/08
3/14/08
9/9/08
2031 NO CHANGE, RELEASE TO PRODUCTION
MF
VB
VB
C
C1
D
6.75
20.00
B
3.84
B
A
LINEAR SCALE SHOWN IN THIS VIEW TRANSLATED IN X-AXIS
OUT OF OPERATING RANGE FOR CLARITY
2.50
27.00
C
2.62
22.86
C
4X R2.79
B2
B1
6.6
3.84
A
14.25
9.00±0.076
SENSOR MOUNTING SURFACE
SCALE MOUNTING SURFACE
2.07
27.00±0.076
5.42
M2.5 OR 2-56UNC-2B
THRU. 2X
SCALE PATTERN
SURFACE
2.03
27.00
SENSOR MOUNTING PLATE RECOMMENDATION
B
4.1
7.2
13.70
2.50
2.24
4X R2.39
37.1
5.0
4X R0.76
9.00
2. IF BENCHING PINS ARE TO BE USED, PINS MUST BE PLACED
ALONG DATUM EDGES OF BOTH THE SENSOR AND THE SCALE
FOR PROPER ALIGNMENT.
(REFERENCE DATUMS B1, B2, AND C1 FOR SENSOR BENCHING PINS).
OPTICAL CL
CABLE LENGTH
+.013M/-.0
KEY
2X
2.79 THRU.
ALL DIMENSIONS ARE IN MILLIMETERS
DIM. APPLY AFTER PROCESSING
INTERPRET ALL GEOMETRIC TOLS.
PER ANSI Y14.5M-1994
Cable Lengths
.5M
1M
3M
5M
6. SEE PAGE 2 FOR DIMENSIONS FOR LOCATIONS OF REFERENCE MARKERS.
7. SEE INTERFACE DRAWING ID-00340 (INTERPOLATOR ELECTRONICS) FOR DIRECTIONALITY.
6
5
4
C
32.00
UNLESS OTHERWISE SPECIFIED
5. RECOMMENDED SENSOR MOUNTING PLATE THICKNESS:
MINIMUM: 4 SCREW THREADS
MAXIMUM: ALLOW CLEARANCE TO SCALE AND SCALE MOUNTING HARDWARE
(BENCHING SURFACES, TRENCHES, ETC.)
4.95
21.59
4. HEIGHT OF SCALE BENCHING PINS NOT TO EXCEED THE THICKNESS
OF THE SCALE.
7
13.49
3.5
SS SLEEVE
3. HEIGHT OF SENSOR BENCHING PINS MUST BE A MINIMUM OF
4.06mm IN HEIGHT FROM DATUM A.
8
B
B
4.75
NOTES:
1. RECOMMENDED MOUNTING HARDWARE:
2-56 or M2.5 SCREWS
A
2.49±0.102
UNITS: mm
DRAWN
Division of GSI
9/25/06
S.BUTURLIA
CHECKED
ENGRG.
TOLERANCES ARE:
DECIMALS:
ANGULAR:
30 MIN.
.X ± .25
.XX ± .13
MicroE Systems
DATE
APPROVALS
9/8/08
A.GOLDMAN
MFG ENG
R.BENNETT
8 Erie Drive
Natick, MA 01760
DESCRIPTION:
INTERFACE, ENCODER, 20um,
LONG LINEAR SCALE w/INDEX
and REFERENCE MARKERS,
MERCURY II SENSOR
9/8/08
QA
A.VILLARROEL
9/9/08
SIZE DWG. NO.
B
SCALE:
3
2
REV.
ID-00338
CAD FILE:
1
A
3rd ANGLE
PROJECTION
SHEET
1 OF 2
A
8
7
6
4
5
3
2
1
SCALE LENGTH (ML + 5mm)
MEASURING LENGTH (ML)
D
D
2.50
INDEX MARKER
D
RIGHT
LIMIT MARKER
LEFT
LIMIT MARKER
C
C
16.00
20.00
8.00
B
B
2.00
INDEX MARKER
2.00
LEFT/RIGHT LIMIT MARKER
NOTES:
UNITS: mm
1. NOTE DATUM EDGE OF GLASS SCALE AND REFERENCE MARKER REGION BEFORE APPLYING MARKERS.
A
MicroE Systems
Division of GSI
2. LIMITS AND INDEX MARKERS ARE OPTIONAL (SEE INSTALLATION MANUAL).
SCALE IDENTIFICATION AND SIZES:
3. LIMITS AND INDEX MARKERS SHALL NOT OVERLAP (MAY CAUSE INTERFERENCE WITH SENSOR).
4. FOR LONGER OR SHORTER LENGTHS OF MARKERS CONTACT MICROE SYSTEMS FOR DETAILS.
5. LINEAR GLASS SCALES CAN HAVE INDEX AND LIMIT MARKERS PRINTED ON THEM IN LOCATION
DESIRED BY CUSTOMER, CONTACT MICROE SYSTEMS FOR FURTHER DETAILS.
8
7
6
5
Scale
Identification
Measuring Length (ML)
Scale Length
MIILXXXX
(Min.) MIIL135
(Max.) MIIL1000
XXXXmm - 5mm
135mm - 5mm = 130mm
1000mm - 5mm = 995mm
XXXXmm
135mm
1000mm
4
DESCRIPTION:
3
2
8 Erie Drive
Natick, MA 01760
INTERFACE, ENCODER, 20um,
LONG LINEAR SCALE w/INDEX
and REFERENCE MARKERS,
MERCURY II SENSOR
SIZE DWG. NO.
B
SCALE:
REV.
ID-00338
A
CAD FILE:
1
3rd ANGLE
PROJECTION
SHEET
2 OF 2
A
8
6
THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF MicroE Systems Corp. AND SHALL
NOT BE REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE
OF APPARATUS WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM MicroE Systems Corp.
3
2
LTR
C
13.70±0.076
DIRECTION "A"
S2
3
4
A
2.8
CABLE DIAMETER
B
2. IF BENCHING PINS ARE TO BE USED, PINS MUST BE
PLACED ALONG DATUM EDGES OF SENSOR FOR
PROPER ALIGNMENT.
(REFERENCE DATUMS B1, B2, AND C1).
E
MOUNTING HOLE AND
THREAD F. EQ. SPACED
ON A BOLT CIRCLE G
3. HEIGHT OF SENSOR BENCHING PINS MUST BE A
MINIMUM OF 4.06mm IN HEIGHT FROM DATUM A.
4. RECOMMENDED SENSOR MOUNTING PLATE THICKNESS:
MINIMUM: 4 SCREW THREADS
MAXIMUM: ALLOW CLEARANCE TO SCALE AND SCALE
MOUNTING HARDWARE (BENCHING SURFACES,
TRENCHES, ETC.)
1
REVISIONS
5.
NOTES:
1. RECOMMENDED MOUNTING HARDWARE:
2-56 or M2.5 SCREWS
D
4
5
7
C
22.86
14.25
C
SB
VB
VB
D
9.00±0.076
M2.5 OR 2-56UNC-2B
THRU. 2X
27.00±0.076
E
MACHINE AXIS
5. SEE INTERFACE DRAWING ID-00340 (INTERPOLATOR
ELECTRONICS) FOR DIRECTIONALITY.
MF
5/14/07
3/14/08
9/9/08
2.62
2.07
D
10/18/06
---INITIAL
1834
CORRECTED DIMS IN SCALE ID SECTION OF TABLE.
1985 SENSOR HEIGHT 6.6 WAS 6.63, CABLE LENGTH 37.1 WAS 26.0
2031 NO CHANGES, RELEASE TO PRODUCTION
4x R2.79
APPROVED
DATE
DESCRIPTION
ECO
SENSOR MOUNTING PLATE
RECOMMENDATION
B
A
Cable Lengths
C
6.6
3.84
.5M
1M
3M
5M
2.03
A
2.29±0.102
SENSOR MOUNTING SURFACE
C
SCALE MOUNTING SURFACE
C1
2.93
6.75
H
2.67
27.00
B
37.1
5.0
4.1
7.2
B
13.70
4X R2.39
2.50
4X R0.76
B
B
2.24
4.75
OPTICAL CL
CABLE LENGTH
+.013M/-.0
4.95
3.84
21.59
2.79 THRU.
32.00
UNLESS OTHERWISE SPECIFIED
C
A
ALL DIMENSIONS ARE IN MILLIMETERS
DIM. APPLY AFTER PROCESSING
SCALE/HUB IDENTIFICATION AND SIZE.
Dim. A
Scale O.D.
44.45
R6425 / HJ
8,192
R12151 / HK
16,384
Scale I.D.
INTERPRET ALL GEOMETRIC TOLS.
PER ANSI Y14.5M-1994
Dim. C
Mounting Dim.
11.96+/-0.05
Dim D.
Hub I.D.
6.358+.013/-.000
Dim E.
Mounting Hole Dia.
1.78
Thread F
12.70+/-0.13
Dim. B
Optical Dia.
31.83
2-56
Dim G.
Bolt Circle
9.53
Dim. H
Hub Height
1.27
63.50
25.40+/-0.13
52.15
22.12+/-0.05
12.708+.013/-.000
3.45
8-32
19.05
1.52
120.65
50.80+/-0.13
104.30
48.20+/-0.05
25.408+.013/-.000
3.45
8-32
38.10
2.03
DRAWN
Division of GSI
9/25/06
S.BUTURLIA
CHECKED
ENGRG.
TOLERANCES ARE:
DECIMALS:
ANGULAR:
30 MIN.
.X ± .25
.XX ± .13
UNITS: mm
A
MicroE Systems
DATE
APPROVALS
9/8/08
A.GOLDMAN
MFG ENG
R.BENNETT
INTERFACE, ENCODER, 20um,
ROTARY SCALE w/INDEX and HUB,
MERCURY II SENSOR
9/8/08
QA
A.VILLARROEL
7
6
5
4
8 Erie Drive
Natick, MA 01760
DESCRIPTION:
9/9/08
SIZE DWG. NO.
B
SCALE:
8
C1
A
2X
Counts/
Rev
5,000
B1
9.00
3.5
SS SLEEVE
Scale/Hub
Identification
R4513 / HI
27.00
B2
13.49
KEY
2.50
3
2
REV.
ID-00339
CAD FILE:
1
A
3rd ANGLE
PROJECTION
SHEET
1 OF 1
8
7
6
THESE DRAWINGS AND SPECIFICATIONS ARE
THE PROPERTY OF MicroE Systems Corp. AND SHALL
NOT BE REPRODUCED OR COPIED OR USED
AS THE BASIS FOR MANUFACTURE OR SALE
OF APPARATUS WITHOUT EXPRESS WRITTEN
AUTHORIZATION FROM MicroE Systems Corp.
4
5
4.98
3
2
1
REVISIONS
60.30
LTR
6.75
S1
----
APPROVED
DATE
DESCRIPTION
ECO
INITIAL
10/18/06
MF
D
D
MOUNTING HOLES DIN-RAIL
2X M2x0.4 - 6H
3.30
12.02
TABLE 1.
DB15, HD Plug Connector
C
B
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Function
A+
B+
Left Limit OutAlarm
Left Limit Out+
Right Limit OutIndex+
IndexABGND
+5V Power In
Right Limit Out+
N/C
N/C
80.37
CABLE COVER
75.36
4.08
9.05
C
39.40
47.64
MOUNTING HOLES
M3 SHCS
24.99
48.49
PIN 5
11.28
B
PIN 10
PIN 1
21.69
18.14
PIN 6
PIN 15
PIN 11
11.89
SEE TABLE 1. FOR
PIN FUNCTIONS
A
UNITS: mm
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN MILLIMETERS
DIM. APPLY AFTER PROCESSING
INTERPRET ALL GEOMETRIC TOLS.
PER ANSI Y14.5M-1994
TOLERANCES ARE:
DECIMALS:
ANGULAR:
30 MIN.
.X ± .25
.XX ± .13
NOTES:
1. WHEN SCALE MOVES IN DIRECTION "A" WITH RESPECT TO A STATIONARY
SENSOR, OUTPUT SIGNAL A+ (PIN 1) LEADS OUTPUT SIGNAL B+ (PIN 2).
SEE SENSOR INTERFACE DRAWINGS FOR DIRECTIONALITY (NOTE CABLE ORIENTATION).
7
6
5
MicroE Systems
DATE
APPROVALS
DRAWN
S.BUTURLIA
Division of GSI
9/25/06
CHECKED
ENGRG.
8
CAL BUTTON
ETHERNET
LEDS
11.91
A.GOLDMAN
10/18/06
DESCRIPTION:
INTERFACE, MERCURY II
INTERPOLATOR ELECTRONICS
MFG ENG
QA
T.GARCIA
A.VILLARROEL
8 Erie Drive
Natick, MA 01760
10/18/06
10/18/06
SIZE DWG. NO.
B
SCALE:
4
3
2
REV.
ID-00340
CAD FILE:
1
S1
3rd ANGLE
PROJECTION
SHEET
1 OF 1
A