X-PAC® Loaded B-Lip - Symmetrical U-Cup
A product of MFP Seals.
XP - X-Pac® Loaded B-Lip
Symmetrical U-Cup
B Lip
The standard compound for this seal is U2145.
It is also available in compounds U2151 and H2155.
N6014 Expander, other materials available.
For compound descriptions and temperature ranges, please refer to page 16.
Glands must be a minimum of 110% of the height
of seal used. Free space is necessary to allow for the
thermal expansion of the seal material and swell due
to the effects of the system fluids. Pressure must be
able to contact both sealing lips.
MFP PART NUMBERS
XP-125-00.375-125BU2145
SEAL TYPE
ød1
L2
CROSS SECTION
COMPOUND
PROFILE STYLE
SYMMETRICAL U-CUPS
X-PAC® U-Cups are a very versatile reciprocating seal
design, for use up to 350 bar (5,000 psi). The rubber
expander creates a compression style seal while still
operating as a pressure actuated U-Cup design. The
result is better low-pressure sealing and less startup
leakage. The primary function of a B-Lip X-Pac® is
for linear rod applications. However, they can also be
used for piston applications when straight lip tooling
is not available. MFP Seals’ X-Pac® U-Cups feature
a knife trimmed sealing lip for increased sealability.
PROFILE STYLE CODES: B = B Lip, No Code for Straight Lip (Standard)
ROD APPLICATION
20°
Chamfer
L2
OD
ID
ØD1
ØD2
L1
XP - X-PAC®
PROFILE
PISTON APPLICATION
20°
Chamfer
ød1
L1
ød1
ØD2
ØD1
r1 0.4 mm (0.016”) max
Pressure: 350 bar (5,000 psi) Max. Velocity: 0.5 m/s (1.5 ft./s) Surface Finish: Ra 0.1 to 0.4 μm (4 to 16 μin.)
www.mfpseals.com
*For compound descriptions
and temperature ranges,
please refer to page 16.
37
X-PAC® Loaded B-Lip - Symmetrical U-Cup
A product of MFP Seals.
PROFILE
ROD APPLICATION
SYMMETRICAL U-CUPS
OD
ID
ØD1
ØD2
XP - X-PAC®
L1
20°
Chamfer
ød1
ød1
ØD2
ØD1
r1 0.4 mm (0.016”) max
MFP BASE PART NUMBER
PROFILE
STYLE
.125” - CROSS SECTION WIDTH
XP-125-00.750-125B
XP-125-00.750-250B
XP-125-00.875-250B
XP-125-01.000-250B
XP-125-01.125-125B
XP-125-01.250-125B
XP-125-01.250-250B
XP-125-01.375-250B
XP-125-01.750-250B
XP-125-02.000-250B
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
.187” - CROSS SECTION WIDTH
38
L1
20°
Chamfer
L2
PISTON APPLICATION
XP-187-00.625-250B
XP-187-01.000-375B
XP-187-01.125-312B
XP-187-01.125-375B
XP-187-01.187-312B
XP-187-01.250-250B
XP-187-01.250-312B
XP-187-01.250-375B
XP-187-01.375-312B
XP-187-01.375-375B
XP-187-01.500-250B
XP-187-01.500-312B
XP-187-01.500-375B
XP-187-01.625-312B XP-187-01.625-375B
XP-187-01.750-375B
XP-187-01.875-375B
XP-187-02.000-375B
XP-187-02.125-187B
XP-187-02.125-250B
XP-187-02.125-375B
XP-187-02.250-375B
XP-187-02.375-375B
*For compound descriptions
and temperature ranges,
please refer to page 16.
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
NOMINAL DIMENSIONS
ID
OD
L2
ROD APPLICATION
PISTON APPLICATION
ød1
ØD1
ØD2
ØD1
ød1
ØD2
L1
+.000/–.001
+.002/–.000
+.002/–.000
+.002/–.000
+.000/–.001
+.000/–.002
+.010/–.000
0.750 1.0000.1250.750 1.0000.7511.000 0.7500.9990.138
0.750 1.0000.2500.750 1.0000.7511.000 0.7500.9990.275
0.875 1.1250.2500.875 1.1250.8761.125 0.8751.1240.275
1.000 1.2500.2501.000 1.2501.0011.250 1.0001.2490.275
1.125 1.3750.1251.125 1.3751.1261.375 1.1251.3740.138
1.250 1.5000.1251.250 1.5001.2511.500 1.2501.4990.138
1.250 1.5000.2501.250 1.5001.2511.500 1.2501.4990.275
1.375 1.6250.2501.375 1.6251.3761.625 1.3751.6240.275
1.750 2.0000.2501.750 2.0001.7512.000 1.7501.9990.275
2.000 2.2500.2502.000 2.2502.0012.250 2.0002.2490.275
+.000/–.002
+.002/–.000
+.002/–.000
+.002/–.000
+.000/–.002
+.000/–.002
+.010/–.000
0.625 1.0000.2500.625 1.0000.6261.000 0.6250.9990.275
1.000 1.3750.3751.000 1.3751.0011.375 1.0001.3740.413
1.125 1.5000.3121.125 1.5001.1261.500 1.1251.4990.344
1.125 1.5000.3751.125 1.5001.1261.500 1.1251.4990.413
1.187 1.5620.3121.187 1.5621.1881.562 1.1871.5610.344
1.250 1.6250.2501.250 1.6251.2511.625 1.2501.6240.275
1.250 1.6250.3121.250 1.6251.2511.625 1.2501.6240.344
1.250 1.6250.3751.250 1.6251.2511.625 1.2501.6240.413
1.375 1.7500.3121.375 1.7501.3761.750 1.3751.7490.344
1.375 1.7500.3751.375 1.7501.3761.750 1.3751.7490.413
1.500 1.8750.2501.500 1.8751.5011.875 1.5001.8740.275
1.500 1.8750.3121.500 1.8751.5011.875 1.5001.8740.344
1.500 1.8750.3751.500 1.8751.5011.875 1.5001.8740.413
1.625 2.0000.3121.625 2.0001.6262.000 1.6251.9990.344
1.625 2.0000.3751.625 2.0001.6262.000 1.6251.9990.413
1.750 2.1250.3751.750 2.1251.7512.125 1.7502.1240.413
1.875 2.2500.3751.875 2.2501.8762.250 1.8752.2490.413
2.000 2.3750.3752.000 2.3752.0012.375 2.0002.3740.413
2.125 2.5000.1872.125 2.5002.1262.500 2.1252.4990.207
2.125 2.5000.2502.125 2.5002.1262.500 2.1252.4990.275
2.125 2.5000.3752.125 2.5002.1262.500 2.1252.4990.413
2.250 2.6250.3752.250 2.6252.2512.625 2.2502.6240.413
2.375 2.7500.3752.375 2.7502.3762.750 2.3752.7490.413
www.mfpseals.com
X-PAC® Loaded B-Lip - Symmetrical U-Cup
A product of MFP Seals.
PROFILE
ROD APPLICATION
ID
ØD1
ØD2
L1
20°
Chamfer
ød1
ød1
ØD2
ØD1
r1 0.4 mm (0.016”) max
MFP BASE PART NUMBER
PROFILE
STYLE
.187” - CROSS SECTION WIDTH
XP-187-02.500-375B
XP-187-02.625-375B
XP-187-02.750-375B
XP-187-02.875-375B
XP-187-03.000-375B
XP-187-03.125-375B
XP-187-03.500-375B
XP-187-03.625-375B
XP-187-03.750-375B
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
.250” - CROSS SECTION WIDTH
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
ID
OD
L2
ROD APPLICATION
PISTON APPLICATION
ød1
ØD1
ØD2
ØD1
ød1
ØD2
L1
+.000/–.002
+.003/–.000
+.003/–.000
+.003/–.000
+.000/–.003
+.000/–.002
+.010/–.000
2.500 2.8750.3752.500 2.8752.5012.875 2.5002.8740.413
2.625 3.0000.3752.625 3.0002.6263.000 2.6252.9990.413
2.750 3.1250.3752.750 3.1252.7513.125 2.7503.1240.413
2.875 3.2500.3752.875 3.2502.8763.250 2.8753.2490.413
3.000 3.3750.3753.000 3.3753.0013.375 3.0003.3740.413
3.125 3.5000.3753.125 3.5003.1263.500 3.1253.4990.413
3.500 3.8750.3753.500 3.8753.5013.875 3.5003.8740.413
3.625 4.0000.3753.625 4.0003.6264.000 3.6253.9990.413
3.750 4.1250.3753.750 4.1253.7514.125 3.7504.1240.413
+.000/–.002
+.003/–.000
+.003/–.000
+.003/–.000
+.000/–.003
+.000/–.002
+.010/–.000
0.500 1.0000.3750.500 1.0000.5011.000 0.5000.9990.413
0.625 1.1250.3750.625 1.1250.6261.125 0.6251.1240.413
1.000 1.5000.2501.000 1.5001.0011.500 1.0001.4990.275
1.000 1.5000.3751.000 1.5001.0011.500 1.0001.4990.413
1.125 1.6250.3751.125 1.6251.1261.625 1.1251.6240.413
1.250 1.7500.3751.250 1.7501.2511.750 1.2501.7490.413
1.375 1.8750.3751.375 1.8751.3761.875 1.3751.8740.413
1.500 2.0000.3751.500 2.0001.5012.000 1.5001.9990.413
1.750 2.2500.3751.750 2.2501.7512.250 1.7502.2490.413
2.000 2.5000.3752.000 2.5002.0012.500 2.0002.4990.413
2.125 2.6250.3752.125 2.6252.1262.625 2.1252.6240.413
2.250 2.7500.3752.250 2.7502.2512.750 2.2502.7490.413
2.500 3.0000.3122.500 3.0002.5013.000 2.5002.9990.344
2.500 3.0000.3752.500 3.0002.5013.000 2.5002.9990.413
2.500 3.0000.5002.500 3.0002.5013.000 2.5002.9990.550
2.750 3.2500.3752.750 3.2502.7513.250 2.7503.2490.413
3.000 3.5000.3753.000 3.5003.0013.500 3.0003.4990.413
3.125 3.6250.3753.125 3.6253.1263.625 3.1253.6240.413
3.250 3.7500.3753.250 3.7503.2513.750 3.2503.7490.413
3.500 4.0000.2503.500 4.0003.5014.000 3.5003.9990.275
3.500 4.0000.3753.500 4.0003.5014.000 3.5003.9990.413
3.750 4.2500.3753.750 4.2503.7514.250 3.7504.2490.413
4.000 4.5000.2504.000 4.5004.0014.500 4.0004.4990.275
4.000 4.5000.3754.000 4.5004.0014.500 4.0004.4990.413
www.mfpseals.com
*For compound descriptions
and temperature ranges,
please refer to page 16.
XP - X-PAC®
XP-250-00.500-375B
XP-250-00.625-375B
XP-250-01.000-250B
XP-250-01.000-375B
XP-250-01.125-375B
XP-250-01.250-375B
XP-250-01.375-375B
XP-250-01.500-375B
XP-250-01.750-375B
XP-250-02.000-375B
XP-250-02.125-375B
XP-250-02.250-375B
XP-250-02.500-312B
XP-250-02.500-375B
XP-250-02.500-500B
XP-250-02.750-375B
XP-250-03.000-375B
XP-250-03.125-375B
XP-250-03.250-375B
XP-250-03.500-250B
XP-250-03.500-375B
XP-250-03.750-375B
XP-250-04.000-250B
XP-250-04.000-375B
NOMINAL DIMENSIONS
SYMMETRICAL U-CUPS
OD
L1
20°
Chamfer
L2
PISTON APPLICATION
39
X-PAC® Loaded U-Cup - Symmetrical B-Lip
A product of MFP Seals.
PROFILE
ROD APPLICATION
SYMMETRICAL U-CUPS
XP - X-PAC®
OD
ID
ØD1
ØD2
L1
20°
Chamfer
ød1
ød1
ØD2
ØD1
r1 0.4 mm (0.016”) max
MFP BASE PART NUMBER
PROFILE
STYLE
.250” - CROSS SECTION WIDTH
XP-250-04.000-500B
XP-250-04.000-562B
XP-250-04.250-562B
XP-250-04.500-250B
XP-250-04.500-375B
XP-250-04.500-500B
XP-250-04.500-562B
XP-250-04.625-500B
XP-250-04.750-562B
XP-250-05.000-375B
XP-250-05.000-562B
XP-250-05.250-562B
XP-250-05.250-750B
XP-250-05.500-375B
XP-250-05.500-562B
XP-250-05.750-375B
XP-250-06.250-562B
XP-250-06.500-375B
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
.312” - CROSS SECTION WIDTH
XP-312-00.875-562B
XP-312-01.000-375B
XP-312-01.000-500B
XP-312-01.250-500B
XP-312-01.375-312B
XP-312-01.375-375B
XP-312-01.375-500B
XP-312-01.500-437B
XP-312-01.750-375B
XP-312-01.750-500B
XP-312-02.000-500B
XP-312-02.250-375B
XP-312-02.250-500B
XP-312-02.375-500B
XP-312-02.500-500B
40
L1
20°
Chamfer
L2
PISTON APPLICATION
*For compound descriptions
and temperature ranges,
please refer to page 16.
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
NOMINAL DIMENSIONS
ID
OD
L2
ROD APPLICATION
PISTON APPLICATION
ød1
ØD1
ØD2
ØD1
ød1
ØD2
L1
+.000/–.002
+.003/–.000
+.003/–.000
+.003/–.000
+.000/–.003
+.000/–.002
+.010/–.000
4.000 4.5000.5004.000 4.5004.0014.500 4.0004.4990.550
4.000 4.5000.5624.000 4.5004.0014.500 4.0004.4990.619
4.250 4.7500.5624.250 4.7504.2514.750 4.2504.7490.619
4.500 5.0000.2504.500 5.0004.5015.000 4.5004.9990.275
4.500 5.0000.3754.500 5.0004.5015.000 4.5004.9990.413
4.500 5.0000.5004.500 5.0004.5015.000 4.5004.9990.550
4.500 5.0000.5624.500 5.0004.5015.000 4.5004.9990.619
4.625 5.1250.5004.625 5.1254.6265.125 4.6255.1240.550
4.750 5.2500.5624.750 5.2504.7515.250 4.7505.2490.619
5.000 5.5000.3755.000 5.5005.0015.500 5.0005.4990.413
5.000 5.5000.5625.000 5.5005.0015.500 5.0005.4990.619
5.250 5.7500.5625.250 5.7505.2515.750 5.2505.7490.619
5.250 5.7500.7505.250 5.7505.2515.750 5.2505.7490.825
5.500 6.0000.3755.500 6.0005.0016.000 5.5005.9990.413
5.500 6.0000.5625.500 6.0005.0016.000 5.5005.9990.619
5.750 6.2500.3755.750 6.2505.7516.250 5.7506.2490.413
6.250 6.7500.5626.250 6.7506.2516.750 6.2506.7490.619
6.500 7.0000.3756.500 7.0006.5017.000 6.5006.9990.413
+.000/–.002
+.004/–.000
+.003/–.000
+.003/–.000
+.000/–.004
+.000/–.002
+.010/–.000
0.875 1.5000.5620.875 1.5000.8771.500 0.8751.4980.619
1.000 1.6250.3751.000 1.6251.0021.625 1.0001.6230.413
1.000 1.6250.5001.000 1.6251.0021.625 1.0001.6230.550
1.250 1.8750.5001.250 1.8751.2521.875 1.2501.8730.550
1.375 2.0000.3121.375 2.0001.3772.000 1.3751.9980.344
1.375 2.0000.3751.375 2.0001.3772.000 1.3751.9980.413
1.375 2.0000.5001.375 2.0001.3772.000 1.3751.9980.550
1.500 2.1250.4371.500 2.1251.5022.125 1.5002.1230.483
1.750 2.3750.3751.750 2.3751.7522.375 1.7502.3730.413
1.750 2.3750.5001.750 2.3751.7522.375 1.7502.3730.550
2.000 2.6250.5002.000 2.6252.0022.625 2.0002.6230.550
2.250 2.8750.3752.250 2.8752.2522.875 2.2502.8730.413
2.250 2.8750.5002.250 2.8752.2522.875 2.2502.8730.550
2.375 3.0000.5002.375 3.0002.3773.000 2.3752.9980.550
2.500 3.1250.5002.500 3.1252.5023.125 2.5003.1230.550
www.mfpseals.com
X-PAC® Loaded U-Cup - Symmetrical B-Lip
A product of MFP Seals.
PROFILE
ROD APPLICATION
ID
ØD1
ØD2
L1
20°
Chamfer
ød1
ød1
ØD2
ØD1
r1 0.4 mm (0.016”) max
MFP BASE PART NUMBER
PROFILE
STYLE
.312” - CROSS SECTION WIDTH
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
.375” - CROSS SECTION WIDTH
XP-375-01.250-375B
XP-375-01.750-375B
XP-375-01.750-625B
XP-375-02.000-375B
XP-375-02.000-625B
XP-375-02.250-500B
XP-375-02.375-375B
XP-375-02.500-375B
XP-375-02.500-500B
XP-375-02.750-375B
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
ID
OD
L2
ROD APPLICATION
PISTON APPLICATION
ød1
ØD1
ØD2
ØD1
ød1
ØD2
L1
+.000/–.002
+.004/–.000
+.003/–.000
+.003/–.000
+.000/–.004
+.000/–.002
+.010/–.000
2.625 3.2500.5003.625 3.2503.6273.250 3.6253.2480.550
2.750 3.3750.5002.750 3.3752.7523.375 2.7503.3730.550
2.875 3.5000.3752.875 3.5002.8773.500 2.8753.4980.413
2.875 3.5000.5002.875 3.5002.8773.500 2.8753.4980.550
3.000 3.6250.5003.000 3.6253.0023.625 3.0006.6230.550
3.250 3.8750.5003.250 3.8753.2523.875 3.2503.8730.550
3.375 4.0000.5003.375 4.0003.3774.000 3.3753.9980.550
3.625 4.2500.3753.625 4.2503.6274.250 3.6254.2480.413
3.750 4.3750.5003.750 4.3753.7524.375 3.7504.3730.550
3.750 4.3750.8753.750 4.3753.7524.375 3.7504.3730.963
4.000 4.6250.3754.000 4.6254.0024.625 4.0004.6230.413
4.000 4.6250.5624.000 4.6254.0024.625 4.0004.6230.619
4.375 5.0000.3754.375 5.0004.3775.000 4.3754.9980.413
4.500 5.1250.6254.500 5.1254.5025.125 4.5005.1230.688
4.750 5.3750.5004.750 5.3754.7525.375 4.7505.3730.550
4.750 5.3750.6254.750 5.3754.7525.375 4.7505.3730.688
5.000 5.6250.3755.000 5.6255.0025.625 5.0005.6230.413
5.000 5.6250.6255.000 5.6255.0025.625 5.0005.6230.688
5.250 5.8750.6255.250 5.8755.2525.875 5.2505.8730.688
5.375 6.0000.3755.375 6.0005.3776.000 5.3755.9980.413
5.500 6.1250.3755.500 6.1255.5026.125 5.5006.1230.413
5.500 6.1250.5005.500 6.1255.5026.125 5.5006.1230.550
5.500 6.1250.6255.500 6.1255.5026.125 5.5006.1230.688
+.000/–.002
+.005/–.000
+.004/–.000
+.004/–.000
+.000/–.005
+.000/–.002
XP - X-PAC®
XP-312-02.625-500B
XP-312-02.750-500B
XP-312-02.875-375B
XP-312-02.875-500B
XP-312-03.000-500B
XP-312-03.250-500B
XP-312-03.375-500B
XP-312-03.625-375B
XP-312-03.750-500B
XP-312-03.750-875B
XP-312-04.000-375B
XP-312-04.000-562B
XP-312-04.375-375B
XP-312-04.500-625B
XP-312-04.750-500B
XP-312-04.750-625B
XP-312-05.000-375B
XP-312-05.000-625B
XP-312-05.250-625B
XP-312-05.375-375B
XP-312-05.500-375B
XP-312-05.500-500B
XP-312-05.500-625B
NOMINAL DIMENSIONS
SYMMETRICAL U-CUPS
OD
L1
20°
Chamfer
L2
PISTON APPLICATION
+.010/–.000
1.250 2.0000.3751.250 2.0001.2522.000 1.2501.9980.413
1.750 2.5000.3751.750 2.5001.7522.500 1.7502.4980.413
1.750 2.5000.6251.750 2.5001.7522.500 1.7502.4980.688
2.000 2.7500.3752.000 2.7502.0022.750 2.0002.7480.413
2.000 2.7500.6252.000 2.7502.0022.750 2.0002.7480.688
2.250 3.0000.5002.250 3.0002.2523.000 2.2502.9980.550
2.375 3.1250.3752.375 3.1252.3773.125 2.3753.1230.413
2.500 3.2500.3752.500 3.2502.5023.250 2.5003.2480.413
2.500 3.2500.5002.500 3.2502.5023.250 2.5003.2480.550
2.750 3.5000.3752.750 3.5002.7523.500 2.7503.4980.413
www.mfpseals.com
*For compound descriptions
and temperature ranges,
please refer to page 16.
41
X-PAC® Loaded U-Cup - Symmetrical B-Lip
A product of MFP Seals.
PROFILE
ROD APPLICATION
SYMMETRICAL U-CUPS
XP - X-PAC®
OD
ID
ØD1
ØD2
L1
20°
Chamfer
ød1
ød1
ØD2
ØD1
r1 0.4 mm (0.016”) max
MFP BASE PART NUMBER
PROFILE
STYLE
.375” - CROSS SECTION WIDTH
XP-375-02.750-500B
XP-375-03.000-375B
XP-375-03.000-500B
XP-375-03.000-625B
XP-375-03.250-500B
XP-375-03.250-625B
XP-375-03.500-500B
XP-375-03.750-375B
XP-375-03.750-500B
XP-375-04.000-500B
XP-375-04.000-625B
XP-375-04.250-375B
XP-375-04.250-500B
XP-375-04.250-625B
XP-375-04.500-500B
XP-375-04.500-625B
XP-375-04.750-500B
XP-375-05.250-375B
XP-375-05.250-500B
XP-375-05.250-562B
XP-375-05.250-625B
XP-375-05.500-625B
XP-375-06.250-375B
XP-375-06.250-500B
XP-375-06.250-625B
XP-375-07.000-500B
XP-375-07.250-500B
XP-375-07.250-625B
XP-375-08.750-500B
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
B Lip
.500” - CROSS SECTION WIDTH
XP-500-02.750-750B
XP-500-03.000-750B
42
L1
20°
Chamfer
L2
PISTON APPLICATION
*For compound descriptions
and temperature ranges,
please refer to page 16.
NOMINAL DIMENSIONS
ID
OD
L2
ROD APPLICATION
PISTON APPLICATION
ød1
ØD1
ØD2
ØD1
ød1
ØD2
L1
+.000/–.002
+.005/–.000
+.004/–.000
+.004/–.000
+.000/–.005
+.000/–.002
+.010/–.000
2.750 3.5000.5002.750 3.5002.7523.500 2.7503.4980.550
3.000 3.7500.3753.000 3.7503.0023.750 3.0003.7480.413
3.000 3.7500.5003.000 3.7503.0023.750 3.0003.7480.550
3.000 3.7500.6253.000 3.7503.0023.750 3.0003.7480.688
3.250 4.0000.5003.250 4.0003.2524.000 3.2503.9980.550
3.250 4.0000.6253.250 4.0003.2524.000 3.2503.9980.688
3.500 4.2500.5003.500 4.2503.5024.250 3.5004.2480.550
3.750 4.5000.3753.750 4.5003.7524.500 3.7504.4980.413
3.750 4.5000.5003.750 4.5003.7524.500 3.7504.4980.550
4.000 4.7500.5004.000 4.7504.0024.750 4.0004.7480.550
4.000 4.7500.6254.000 4.7504.0024.750 4.0004.7480.688
4.250 5.0000.3754.250 5.0004.2525.000 4.2504.9980.413
4.250 5.0000.5004.250 5.0004.2525.000 4.2504.9980.550
4.250 5.0000.6254.250 5.0004.2525.000 4.2504.9980.688
4.500 5.2500.5004.500 5.2504.5025.250 4.5005.2480.550
4.500 5.2500.6254.500 5.2504.5025.250 4.5005.2480.688
4.750 5.5000.5004.750 5.5004.7525.500 4.7505.4980.550
5.250 6.0000.3755.250 6.0005.2526.000 5.2505.9980.413
5.250 6.0000.5005.250 6.0005.2526.000 5.2505.9980.550
5.250 6.0000.5625.250 6.0005.2526.000 5.2505.9980.619
5.250 6.0000.6255.250 6.0005.2526.000 5.2505.9980.688
5.500 6.2500.6255.500 6.2505.5026.250 5.5006.2480.688
6.250 7.0000.3756.250 7.0006.2527.000 6.2506.9980.413
6.250 7.0000.5006.250 7.0006.2527.000 6.2506.9980.550
6.250 7.0000.6256.250 7.0006.2527.000 6.2506.9980.688
7.000 7.7500.5007.000 7.7507.0027.750 7.0007.7480.550
7.250 8.0000.5007.250 8.0007.2528.000 7.2507.9980.550
7.250 8.0000.6257.250 8.0007.2528.000 7.2507.9980.688
8.750 9.5000.5008.750 9.5008.7529.500 8.7509.4980.550
+.000/–.003
+.007/–.000
+.005/–.000
+.005/–.000
+.000/–.007
+.000/–.003
+.010/–.000
B Lip 2.750 3.7500.7502.750 3.7502.7523.750 2.7503.7480.825
B Lip 3.000 4.0000.7503.000 4.0003.0024.000 3.0003.9980.825
www.mfpseals.com