Euro-Clear Ltd.
2015 Industrial Components Catalog
2015 year
Components catalog
Web page: www.euro-clear.eu
Email: [email protected]
Phone.: +36 96 544 240
Fax: +36 96 544 248
- General information 
Prices in the price list are USD based net, EXW Gonyu.

Goods that has been assembled by Euro-Clear Ltd. have EUR1 certificate. If client has a request for this
certificate it has to be indicated when placing order.

Incurred charges for the certificates are paid by the client (e.g. custom clearance, EUR1), if order is below
$6.000,-.

In case of client request Euro-Clear Ltd. gives quotation for a transportation of goods.

In case of client request Euro-Clear Ltd. gives EUR based invoice. In this case EUR - USD conversion is
based on the following daily commercial exchange rate: EUR/HUF buy rate divided by USD/HUF sell rate.

In case of client request Euro-Clear Ltd. gives CZK based invoice. In this case CZK - USD conversion is
based on the following daily commercial exchange rate: CZK/HUF buy rate divided by USD/HUF sell rate.

In case of client request Euro-Clear Ltd. gives HUF based invoice. In this case HUF - USD conversion is
based on the following daily commercial exchange rate: HUF/USD sell rate.

Daily exchange rate used for conversion can be seen on the following web site:
http://www.mkb.hu/index.html?useLang=en

Prices in this catalog are valid with the condition that buyer bears banking charges arisen in connection
with money transfer. When preparing money transfer buyer has to choose "OUR" option.

Any underpayment to Euro-Clear Ltd. arisen from choosing orher money transfer options than "OUR" will
be registered as claim of Euro-Clear Ltd.
- Normal ordering process 1.
Client places order via e-mail or fax.
For our Austrian, German clients, please send your order to
[email protected]
For our Italian clients, please send your order to
[email protected]
For our Slovak and Czech clients, please send your order to
[email protected]
For our Serbian, Croatian, Slovenian, Bulgarian clients, please send your order to [email protected]
For our Romanian clients, please send your order to
[email protected]
For our Hungarian clients, please send your order to
[email protected]
2.
Euro-Clear Ltd. sends a Proforma Invoice as a document of order confirmation.
3.
Client transfer amount standing on Proforma Invoice to the bank account of Euro-Clear Ltd.
IMPORTANT! Without any transfer, the Proforma Invoice will be cancelled automatically from our system
within 5 days.
4.
Euro-Clear Ltd. prepares the ordered goods approximately 3 working days after money transfer has arrived to it’s account. Weights and dimensions of delivery are available after the goods are prepared.
5.
Client picks up goods from warehouse of Euro-Clear Ltd.
Warehouse opening hours:
Monday—Thursday: 8:00—16:30
Friday: 8:00—14:00
The product specifications are for information purposes only!
Euro-Clear Ltd. owns the right of the technical changes!
The items can be different from the pictures!
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 4
2015/Filter cartridges
Exchangeable PP filter cartridges
FCPPS
Part number
Products
Porus size
FCPPS-0505
Exchangeable 5”x2.5” size filter cartridge
5 µm
FCPPS-0550
Exchangeable 5”x2.5” size filter cartridge
50 µm
FCPPS-10001
Exchangable 10”x2.5” size filter cartridge
0,1 µm
FCPPS-10005
Exchangeable 5”x2.5” size filter cartridge
0,5 µm
FCPPS-1001
Exchangeable 10”x2.5” size filter cartridge
1 µm
FCPPS-1005
Exchangeable 10”x2.5” size filter cartridge
5 µm
FCPPS-1020
Exchangeable 10”x2.5” size filter cartridge
20 µm
FCPPS-1050
Exchangeable 10”x2.5” size filter cartridge
50 µm
FCPPS-20001
Exchangeable 20”x2.5” size filter cartridge
0,1 µm
FCPPS-20005
Exchangeable 20”x2.5” size filter cartridge
0,5 µm
FCPPS-2001
Exchangeable 20”x2.5” size filter cartridge
1 µm
FCPPS-2005
Exchangeable 20”x2.5” size filter cartridge
5 µm
FCPPS-2020
Exchangeable 20”x2.5” size filter cartridge
20 µm
FCPPS-2050
Exchangeable 20”x2.5” size filter cartridge
50 µm
FCPPS-3005
Exchangeable 30”x2.5” size filter cartridge
5 µm
FCPPS-40001
Exchangeable 40”x2.5” size filter cartridge
0,1 µm
FCPPS-40005
Exchangeable 40”x2.5” size filter cartridge
0,5 µm
FCPPS-4005
Exchangeable 40”x2.5” size filter cartridge
5 µm
FCPPS-20B001
Exchangeable BigBlue 20”x4” filter cartridge
0,1 µm
FCPPS-20B005
Exchangeable BigBlue 20”x4” filter cartridge
0,5 µm
FCPPS-20B01
Exchangeable BigBlue 20”x4” filter cartridge
1 µm
FCPPS-20B05
Exchangeable BigBlue 20”x4” filter cartridge
5 µm
FCPPS-20B20
Exchangeable BigBlue 20”x4” filter cartridge
20 µm
FCPPS-20B50
Exchangeable BigBlue 20”x4” filter cartridge
50 µm
Filter cartridges with 0,1µm porus size are suitable for bacteria filtration.
Activated carbon and KDF cartridges
FCCTO
Part number
Products
Porus size
FCCTO-05
Activated carbon 5”x2.5” size filter cartridge
10 µm
FCCTO-10
Activated carbon 10”x2.5” size filter cartridge
10 µm
FCCTO-20
Activated carbon 20”x2.5” size filter cartridge
10 µm
FCCTO-20B
Activated carbon BigBlue 20”x4” size filter cartridge
10 µm
FCGAC-05P
Dual activated carbon and mechanical 10”x2.5” cartridge
5 µm
FCCTO-10-KDF
Activated carbon and KDF 10”x2.5” filter cartridge
-
FCGAC-10-KDF
Dual activated carbon and KDF 10”x2.5” cartridge
5 µm
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 5
2015/Special filters, Empty cartridges
Washable filter cartridges
FCNTC
Part
number
Products
Porus size
FCNTC-05
Washable 5”x2.5” size filter cartridge
100 µm
FCNTC-10
Washable 10”x2.5” size filter cartridge
100 µm
Empty cartridges
Part
number
Products
Volume
FCGEC-10
Refill empty cartridge for 10”x2.5”
0.55 liter
FCGEC-20B
Refill empty cartridge for BigBlue 20”x4”
3.5 liter
CILC-10C
Refill empty in-line cartridge, 1/4” connection
0.4 liter
CILC-12C
Refill empty in-line cartridge, 1/4” connection
0.5 liter
Special filters
CILC-12C
BS-520 & BS-517
Part
number
Products
Media
liter
Con.
Flow /
Capacity
BS-517CE
Water hardeness remover filter
3.5
3/8”
9l/min
1500 lit (10°dH)
BS-517NI
Nitrate remover filter
3.5
3/8”
2 l/min
860 lit
BS-517AS
Arsenic remover filter
3.5
3/8”
3 l/min
160 000 lit
BS-517MB
Demineralizer filter
3.5
3/8”
BS-517FE
Iron remover
3.5
3/8”
BS-517HF
5 micron mechanical filtration
3.5
3/8”
3 l/min
2000 lit
BS-517AT
Filter with activated carbon
3.5
3/8”
3 l/min
800 lit
BS-520CE
Water hardeness remover filter
4,5
3/8”
9l/min
1800 lit (10°dH)
BS-520NI
Nitrate remover filter
4,5
3/8”
2 l/min
1000 lit
BS-520AS
Arsenic remover filter
4,5
3/8”
BS-520MB
Demineralizer filter
4,5
3/8”
BS-520FE
Iron remover
4,5
3/8”
BS-520HF
5 micron mechanical filtration
4,5
3/8”
BS-520AT
Filter with activated carbon
4,5
3/8”
5 l/min
270 lit
3 l/min
40 lit
3 l/min
190 000 lit
5 l/min
320 lit
3 l/min
10000 lit
3 l/min
10000 lit
3 l/min
10000 lit
Above mentioned parameters can change a lot depending on the water quality.
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 6
2015/Filter houses
Part
number
Products
Connection
FHPRA
Household washing machine poliphosphate scaling inhibitor,
transparent body, copper sleeve
3/4”
SF-PHOS
Poliphosphate scaling inhibitor media(kg)
-
RO-CUP
FH20B1
FH-AQA
FHPRA
Part
number
Products
Size
Temp.
Pressure
FH-ATL0534
3 parts transparent houses with
air relieve valve and brass thread
5” x 3/4”
2-45 °C
Max.
6 bar
FH-AQA1012
3 parts transparent houses with
air relieve valve and brass thread
10” x 1/2”
2-45 °C
Max.
6 bar
FH-AQA1034
3 parts transparent houses with
air relieve valve and brass thread
10” x 3/4”
2-45 °C
Max.
6 bar
FH-AQA1010
3 parts transparent houses with
air relieve valve and brass thread
10” x 1”
2-45 °C
Max.
6 bar
FH-ATL-WR
Wrench
-
FH-ATL-BR
Bracket
-
FH-AQA-WR
Wrench
-
FH-AQA-BR
Bracket
-
FH-AQA-OR
Spare O-ring for AQA filter house
-
Part
number
Products
Size
Temp.
Pressure
RO-CUP
2 parts white houses with plastic
thread
10” x 1/4”
2-45 Cº
25 bar
RO-CUP-WR
Wrench
-
RO-CUP-BR
Bracket
-
Part
number
Products
Size
Temp.
Pressure
FH20B1
BigBlue filter house with air
relieve valve
20” x 1”
2-45 Cº
6 bar
FXWR1BB
Wrench for BigBlue
-
FXBRBB
Bracket for BigBlue
-
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 7
2015/Mechanical filters
Part
No.
Products
Con.
Size
LxH
Temp
Cº
Pres
bar
Flow
m3/h
FR-34
Polipropilen head with brass thread and polipropilen body
differential pressure gauge (red ball pops up), cleaner tap,
75µm stainless steel filter cartridge with big surface
3/4”
98x220
mm
4-30
10
2,1
FR-34
DFR-34
DFR-1
Part number
Products
Con.
Temp.
Cº
Pres.
bar
Flow
m3/h
DFR-34
Copper head filter with transparent body with pressure
regulator include cleaner system and cleaner tap, with
stainless steel filter cartridge 90µm
3/4”
4-30
16
2,3
DFR-1
Copper head filter with transparent body with pressure
regulator include cleaner system and cleaner tap, with
stainless steel filter cartridge 90µm
1”
4-30
16
2,3
FR-2
FR-2H
Part
number
Products
Con.
Length
mm
Temp
Cº
Pres.
bar
Flow
m3/h
FR-2
Brass filter with cleaner tap and 95µm filter cartridges
according to DIN 1988, DVGW 503
2”
145
4-40
10
15
FR-2A
Automatic (time controlled) backwash brass filter with cleaner
tap, 95µm cartridges according to DIN 1988, DVGW 503
2”
145
4-40
10
15
FR-2H
Hot water brass filter with cleaner tap and 95µm filter
cartridges according to DIN 1988, DVGW 503
2”
145
4-90
10
15
FC-FR-2
Spare parts 95µm filter cartridge for FR-2, FR-2A, FR-2H
4-90
10
15
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 8
2015/Mechanical filters
Part
number
Products
Con.
Length
mm
Temp
Cº
Pres.
bar
Flow
m3/h
DF-100
Easy cleaning disc filter with black body and
cleaner tap, 100µm filter cartridges.
1”
150
4-50
6
6
DF-150
Easy cleaning disc filter with black body and
cleaner tap, 100µm filter cartridges.
6/4”
188
4-50
6
12
DF-200
Easy cleaning disc filter with black body and
cleaner tap, 100µm filter cartridges.
2”
212
4-50
6
20
DF-250
Easy cleaning disc filter with black body and
cleaner tap, 100µm filter cartridges.
2,5”
300
4-50
6
40
DF-100A
Disc automatic (time controlled) backwash filter with black
body and cleaner tap, 100µm filter cartridges
1”
150
4-50
6
6
DF-150A
Disc automatic (time controlled) backwash filter with black
body and cleaner tap, 100µm filter cartridges
6/4”
188
4-50
6
12
DF-200A
Disc automatic (time controlled) backwash filter with black
body and cleaner tap, 100µm filter cartridges
2”
212
4-50
6
20
DF-250A
Disc automatic (time controlled) backwash filter with black
body and cleaner tap, 100µm filter cartridges
2,5”
300
4-50
6
40
MM-SET-T
Manometer set for disc filter DF-100, DF-200
2 pcss of MM-50/10 (0-10bar) bottom connection
MM-SET-F
Manometer set for disc filter DF-100, DF-200
2 pcss of MM-50/10 (0-10bar) back connection
DF-100
DF-200
DF-100
+
MM-SET-T
DF-150
DF-250
BlueClear FH-2020SS
BlueClear FH-4020SS
Part
number
Products
In/out
conn.
Flow
m3/h
Pressure /
Temp.
Size (LxH)
mm
BlueClear
FH-4020SS
High capacity stainless steel filter
for 5pcs 2.5”x40” PP filter cartridge
2”
20
6,8 bar /
93ºC
Ø215 x 1365
BlueClear
FH-2020SS
High capacity stainless steel filter
for 5pcs 2.5”x20” PP filter cartridge
6/4”
10
6,8 bar /
93°C
Ø215 x 860
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 9
2015/Industrial mechanical filters
FR-80
FR-80H
Part
number
Products
Con.
Length
mm
Temp.
Cº
Pres.
bar
Power
m3/h
FR-50
Industrial flange type filter with cleaner tap and 95µm
filter cartridges according to DIN 1988, DVGW 503
DN50
242
4-40
10
16,5
FR-65
Industrial flange type filter with cleaner tap and 95µm
filter cartridges according to DIN 1988, DVGW 503
DN65
242
4-40
10
19
FR-80
Industrial flange type filter with cleaner tap and 95µm
filter cartridges according to DIN 1988, DVGW 503
DN80
310
4-40
10
37
FR-100
Industrial flange type filter with cleaner tap and 95µm
filter cartridges according to DIN 1988, DVGW 503
DN100
310
4-40
10
50
FR-50A
Automatic (time controlled) backwash industrial flange
type filter with cleaner tap and 95µm filter
DN50
242
4-40
10
16,5
FR-65A
Automatic (time controlled) backwash industrial flange
type filter with cleaner tap and 95µm filter
DN65
242
4-40
10
19
FR-80A
Automatic (time controlled) backwash industrial flange
type filter with cleaner tap and 95µm filter
DN80
310
4-40
10
37
FR-100A
Automatic (time controlled) backwash industrial flange
type filter with cleaner tap and 95µm filter
DN100
310
4-40
10
50
FR-50H
Hot water industrial flange type filter with cleaner tap
and 95µm filter cartridges, DIN 1988, DVGW 503
DN50
242
4-90
10
16,5
FR-65H
Hot water industrial flange type filter with cleaner tap
and 95µm filter cartridges, DIN 1988, DVGW 503
DN65
242
4-90
10
19
FR-80H
Hot water industrial flange type filter with cleaner tap
and 95µm filter cartridges, DIN 1988, DVGW 503
DN80
310
4-90
10
37
FR-100H
Hot water industrial flange type filter with cleaner tap
and 95µm filter cartridges, DIN 1988, DVGW 503
DN100
310
4-90
10
50
FC-FR-50
Spare parts 95µm filter cartridge
for FR-50, FR-65, FR-50A, FR-65A, FR-50H, FR-65H
4-90
10
19
FC-FR-80
Spare parts 95µm filter cartridge
for FR-80, FR-100, FR-80A, FR-100A, FR-80H, FR-100H
4-90
10
50
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 10
2015/Industrial mechanical filters
Part
number
LxWxH
mm
Cartridges
mm
Temp.
IWF-80
300x250x705
1pc d90x400
4-93 Cº
IWF-100
400x345x765
2pcs d90x400
4-93 Cº
IWF-125
450x390x810
3pcs d90x400
4-93 Cº
IWF-150
450x390x940
3pcs d90x500
4-93 Cº
IWF-200
520x440x1035
4pcs d90x500
4-93 Cº
IWF-100M
Part
number
Products
Con.
Flow
m3/h
Pres.
IWF-80M
Industrial flange type filter with1/2”cleaner tap and washable 100µm
stainless steel cartridges with 2pcs manometer
DN80
36
10 bar
IWF-100M
Industrial flange type filter with1/2”cleaner tap and washable 100µm
stainless steel cartridges with 2pcsmanometer
DN100
85
10 bar
IWF-125M
Industrial flange type filter with1/2”cleaner tap and washable 100µm
stainless steel cartridges with 2pcs manometer
DN125
100
10 bar
IWF-150M
Industrial flange type filter with1/2”cleaner tap and washable 100µm
stainless steel cartridges with 2pcs manometer
DN150
130
10 bar
IWF-200M
Industrial flange type filter with1/2”cleaner tap and washable 100µm
stainless steel cartridges with 2pcs manometer
DN200
170
10 bar
IWF-80A
Automatic (time controlled) backwash industrial flange type filter with
cleaner tap and 100µm stainless steel cartridges with 2pcs manometer
DN80
36
10 bar
IWF-100A
Automatic (time controlled) backwash industrial flange type filter with
cleaner tap and 100µm stainless steel cartridges with 2pcs manometer
DN100
85
10 bar
IWF-125A
Automatic (time controlled) backwash industrial flange type filter with
cleaner tap and 100µm stainless steel cartridges with 2pcs manometer
DN125
100
10 bar
IWF-150A
Automatic (time controlled) backwash industrial flange type filter with
cleaner tap and 100µm stainless steel cartridges with 2pcs manometer
DN150
130
10 bar
IWF-200A
Automatic (time controlled) backwash industrial flange type filter with
cleaner tap and 100µm stainless steel cartridges with 2pcs manometer
DN200
170
10 bar
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 11
2015/Testers
CM-230A
CM-230AB
Part number
Measuring
parameters
Products
Conductivity measuring instrument with probe and LCD digital display.
Probe connection: 1/2” ; Outline dimension: 48x96x100mm
Slot dimension for installation: 45x91mm
Conductivity measuring instrument with probe and LCD digital display.
Probe connection: 1/2” ; Outline dimension: 48x96x100mm ,
Slot dimension for installation: 45x91mm ; Hi-limited alarm setting
CM-230A
CCT-3320
0-199.9 µS/cm
0-199.9 µS/cm
CCT-3320-GS
Conductivity measuring instrument with graphit probe and LCD digital display. Probe
connection: 1/2” ; Outline dimension: 48x96x100mm ,
Slot dimension for installation: 45x91mm ; Hi-limited alarm setting.
0-19.99 mS/cm
CM-230AB
Conductivity measuring instrument with probe and LCD digital display.
Probe connection: 1/2”, mounted in IP67 box
0-199.9 µS/cm
CCT-3320B
Conductivity measuring instrument with probe and LCD digital display.
Probe connection: 1/2”; Hi-limited alarm setting, mounted in IP67 box
0-199.9 µS/cm
CCT-3320B-V
Conductivity measuring instrument with probe and LCD digital display.
Probe connection: 1/2”; Stops outlet when water is over limit, mounted in IP67 box
0-199.9 µS/cm
CCT-3320-GSB
Conductivity measuring instrument with graphit probe and LCD digital display. Probe
connection: 1/2”; Hi-limited alarm setting, mounted in IP67 box.
0-19.99 mS/cm
ORP/PH
OKT-1
TDS/EC
TDS-2
Part
number
Products
Measuring
parameters
ORP/PH
Digital combined pH and ORP
tester,temperature compensated
pH (pH) / ORP (mV)
PH-CAL/4
20ml Calibration solution of pH 4.01
pH (pH)
PH-CAL/7
20ml Calibration solution of pH 7.01
pH (pH)
PH-CAL/10
20ml Calibration solution of pH 10.01
pH (pH)
PH-STO
230 ml pH sonda storage liquid
TDS/EC
Conductivity and salt-index
tester,temperature compensated
ppm / µS
TDS-2
Digital TDS measurement
Total dissolve solids (ppm)
Numbers
of measure
OKT-1
Hardness tester, 1 bottle
German hardness(ºdH)
50 pcs
OKT-2
Hardness tester, 2 bottles
German hardness (ºdH)
100 pcs
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 12
2015/Canature pressure tanks
Products
Size
Volume
liter
Diameter
mm
CA-PV006-T
PE pressure tank, without base
7 x 13 x 2.5”
6.3
181
CA-PV012-T
PE pressure tank, without base
8 x 17 x 2.5”
10.5
205
CA-PV014-T
PE pressure tank, without base
8 x 35 x 2.5”
23.6
205
CA-PV020-T
PE pressure tank, without base
8 x 44 x 2.5”
31.3
205
CA-PV019-T
PE pressure tank, without base
9 x 35 x 2.5”
31.6
232
CA-PV022-T
PE pressure tank, without base
10 x 17 x 2.5”
16.5
258
CA-PV024-T
PE pressure tank, without base
10 x 35 x 2.5”
38.3
258
CA-PV030-T
PE pressure tank, with base
7 x 17 x 2.5”
8.5
181
CA-PV032-T
PE pressure tank, with base
7 x 35 x 2.5”
19.1
181
CA-PV035-T
PE pressure tank, with base
8 x 17 x 2.5”
10.5
205
CA-PV037-T
PE pressure tank, with base
8 x 35 x 2.5”
23.6
205
CA-PV038-T
PE pressure tank, with base
8 x 44 x 2.5”
31.3
205
CA-PV042-T
PE pressure tank, with base
9 x 35 x 2.5”
31.6
232
CA-PV047-T
PE pressure tank, with base
10 x 17 x 2.5”
16.5
258
CA-PV048-T
PE pressure tank, with base
10 x 35 x 2.5”
38.3
258
CA-PV049-T
PE pressure tank, with base
10 x 44 x 2.5”
48.8
258
CA-PV050-T
PE pressure tank, with base
10 x 54 x 2.5”
61
258
CA-PV053-T
PE pressure tank, with base
12 x 48 x 2.5”
78.54
307
CA-PV057-T
PE pressure tank, with base
13 x 54 x 2.5”
105.7
335
CA-PV190-T
PE pressure tank, with base
14 x 65 x 2.5”
148
366
CA-PV192-T
PE pressure tank, with base
16 x 65 x 2.5”
188.6
411
Part number
Operating pressure:
Operating temperature:
Max vacuum:
Mini exposed temperature:
Cycle test:
Burst test:
Certificate:
150 psi (10,5 Bar)
1-50°C
140 mm Hg
-30°C
250 000 times from 0-150 psi
4 times max operating pressure (600psi)
NSF, TÜV
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 13
2015/Canature pressure tanks, accessories
Part number
Products
Size
Volume
liter
Diameter
mm
CA-PV191-T
PE pressure tank, with base
14 x 65 x 4”
148
366
CA-PV193-T
PE pressure tank, with base
16 x 65 x 4”
188.6
411
CA-PV195-T
PE pressure tank, with base
18 x 65 x 4”
257
491
CA-PV197-T
PE pressure tank, with base
21 x 62 x 4”
330
555
CA-PV199-T
PE pressure tank, with base
24 x 72 x 4”
494
611
CA-PV217-TB
PE pressure tank, top and bottom
threaded openings, with base
21 x 62 x 4”x 4”
330
555
CA-PV219-TB
PE pressure tank, top and bottom
threaded openings, with base
24 x 72 x 4”x 4”
494
611
CA-PV220-TB
PE pressure tank, top and bottom
threaded openings, with base
30 x 72 x 4”x 4”
720
781
CA-PV221-TB
PE pressure tank, top and bottom
threaded openings, with base
36 x 72 x 4”x 4”
1023
932
CA-PV276-TB
PE pressure tank, top and bottom
flangeded openings, with base
42 x 72 x 6” x 6”
1530
1090
CA-PV279-TB
PE pressure tank, top and bottom
flangeded openings, with base
48 x 72 x 6” x 6”
1950
1235
CA-PV274-TB
PE pressure tank, top and bottom
flangeded openings, with base
63 x 86 x 6” x 6”
3250
1608
506-DT-4
Aeration and vacuum
breaker valve
507-BJ-3
502-DT-2
Part
number
Products
Material
502-DT-2
Plug 4”
ABS
506-DT-4
Closing flange 6”
ABS
504-BJ-1
Threaded converter 4”-2.5”
ABS
507-BJ-3
Flanged converter 6”-4”
ABS
WC-PV308
Aeration and vacuum breaker valve
PP
504-BJ-1
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 14
2015/Distributors
Part number
Products
Tank size
Gap size
P02/34
Bottom distributor d25
6-16”
0.25mm
P01/34
Top distributor d25
6-16”
0.25mm
P02/1
Bottom distributor d32
6-16”
0.25mm
P01/1
Top distributor d32
6-16”
0.25mm
310077P
3meter long
PVC pipe for P02/34
201-TM-0.25
Bottom filtering candle
1m3/h
0.25mm
Part number
Products
Tank size
Gap size
208-25-TM-0.25
Small bottom distributor d25
6-13”
0.25mm
Part number
Products
Tank size
Gap size
Flow (∆p=0,2bar)
218-50-TM-0.25
Bottom distributor d50
12-36”
0.25mm
20 m3/h
216-50-TM-0.25
Top distributor d50
12-36”
0.25mm
20 m3/h
216D-50-TM-0.25
Top distributor double length
d50
16-42”
0.25mm
30 m3/h
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 15
2015/Distributors
Flow (∆p=0,2bar)
Part number
324-50-TM-0.25
15 m3/h
306-50-TM-0.25
16 m3/h
307-50-TM-0.25
17m3/h
308-63-TM-0.25
18 m3/h
309-63-TM-0.25
20 m3/h
326-63-TM-0.25
32 m3/h
327-63-TM-0.25
36 m3/h
Part number
Products
Tank size
A
B
C
Gap size
324-50-TM-0.25
Bottom distributor d50 ; 6-arm
13-16”
260
82
53
0.25mm
306-50-TM-0.25
Bottom distributor d50 ; 6-arm
18-21”
370
136
53
0.25mm
307-50-TM-0.25
Bottom distributor d50 ; 6-arm
24”
450
182
53
0.25mm
308-63-TM-0.25
Bottom distributor d50/63 ; 6-arm
30”
620
260
53
0.25mm
309-63-TM-0.25
Bottom distributor d50/63 ; 6-arm
36-42”
710
330
53
0.25mm
326-63-TM-0.25
Bottom distributor d63 ; 2x6-arm
36-42”
710
330
53
0.25mm
327-63-TM-0.25
Bottom distributor d63 ; 2x6-arm
48”
930
410
53
0.25mm
Flow (∆p=0,2bar)
Part number
401-90-TM-0.25
17 m3/h
402-90-TM-0.25
28 m3/h
403-90-TM-0.25
30 m3/h
411-90-TM-0.25
32 m3/h
412-63-TM-0.25
48 m3/h
413-63-TM-0.25
60 m3/h
Part number
Products
Tank size
A
B
C
Gap size
401-90-TM-0.25
Bottom distributor d90 ; 8-arm
24”
512
190
53
0.25mm
402-90-TM-0.25
Bottom distributor d90 ; 8-arm
30”
630
256
53
0.25mm
403-90-TM-0.25
Bottom distributor d90 ; 8-arm
36”
750
318
53
0.25mm
411-90-TM-0.25
Bottom distributor d90 ; 8-arm
42”
870
380
53
0.25mm
412-63-TM-0.25
Bottom distributor d90 ; 2x8-arm
48”
980
445
53
0.25mm
413-63-TM-0.25
Bottom distributor d90 ; 2x8-arm
63”
1218
564
53
0.25mm
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 16
2015/Distributors
Part number
Flow (∆p=0,2bar)
311-63-SM-0.25
20 m3/h
312-63-SM-0.25
30 m3/h
313-63-SM-0.25
36 m3/h
Part number
Products
Tank size
A
B
C
Gap size
311-63-SM-0.25
Top distributor d63
14-30”
180
400
88
0.25mm
312-63-SM-0.25
Top distributor d63
21-36”
242
472
88
0.25mm
313-63-SM-0.25
Top distributor d63
30-36”
310
540
88
0.25mm
Flow (∆p=0,2bar)
Part number
415-90-TM-0.2
40 m3/h
416-90-TM-0.2
50 m3/h
417-90-TM-0.2
60 m3/h
Part number
Products
Tank size
A
B
C
Gap size
415-90-SM-0.25
Top distributor d90
42-48”
260
360
140
0.25mm
416-90-SM-0.25
Top distributor d90
48-64”
330
420
140
0.25mm
417-90-SM-0.25
Top distributor d90
64-80”
430
520
140
0.25mm
Part number
Products
Part number
Flow (∆p=0,2bar)
325-63-SM-0.25
15 m3/h
319-63-SM-0.25
16 m3/h
320-63-SM-0.25
17 m3/h
321-63-SM-0.25
18 m3/h
322-63-SM-0.25
20 m3/h
329-63-SM-0.25
36 m3/h
Tank size
A
B
C
Gap size
325-63-SM-0.25
Top distributor d63 6 arm
13-16”
260
82
53
0.25mm
319-63-SM-0.25
Top distributor d63 6 arm
18-21”
370
136
53
0.25mm
320-63-SM-0.25
Top distributor d63 6 arm
24”
450
182
53
0.25mm
321-63-SM-0.25
Top distributor d63 6 arm
30”
620
260
53
0.25mm
322-63-SM-0.25
Top distributor d63 6 arm
36-42”
710
330
53
0.25mm
329-63-SM-0.25
Top distributor d63 2x6arm
48”
930
410
53
0.25mm
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 17
2015/Distributors
Flow (∆p=0,2bar)
Part number
325-63-SM-0.25
15 m3/h
319-63-SM-0.25
16 m3/h
320-63-SM-0.25
17 m3/h
321-63-SM-0.25
18 m3/h
322-63-SM-0.25
20 m3/h
328-63-SM-0.25
32 m3/h
329-63-SM-0.25
36 m3/h
Part number
Products
Tank size
A
B
C
Gap size
325-63-SM-0.25
Bottom distributor d63 ; 6 arm
13-16”
260
82
53
0.25mm
319-63-SM-0.25
Bottom distributor d63 ; 6 arm
18-21”
370
136
53
0.25mm
320-63-SM-0.25
Bottom distributor d63 ; 6 arm
24”
450
182
53
0.25mm
321-63-SM-0.25
Bottom distributor d63 ; 6 arm
30”
620
260
53
0.25mm
322-63-SM-0.25
Bottom distributor d63 ; 6 arm
36-42”
710
330
53
0.25mm
328-63-SM-0.25
Bottom distributor d63 ; 2x6-arm
36-42”
710
330
53
0.25mm
329-63-SM-0.25
Bottom distributor d63 ; 2x6-arm
48”
930
410
53
0.25mm
Flow (∆p=0,2bar)
Part number
418-90-SM-0.25
26 m3/h
419-90-SM-0.25
28 m3/h
420-90-SM-0.25
30 m3/h
421-90-SM-0.25
32 m3/h
429-63-SM-0.25
48 m3/h
430-63-SM-0.25
60 m3/h
Part number
Products
Tank size
A
B
C
Gap size
418-90-SM-0.25
Bottom distributor d90 ; 8-arm
24”
512
190
53
0.25mm
419-90-SM-0.25
Bottom distributor d90 ; 8-arm
30”
630
256
53
0.25mm
420-90-SM-0.25
Bottom distributor d90 ; 8-arm
36”
750
318
53
0.25mm
421-90-SM-0.25
Bottom distributor d90 ; 8-arm
42”
870
380
53
0.25mm
429-90-SM-0.25
Bottom distributor d90 ; 2x8-arm
48”
980
445
53
0.25mm
430-90-SM-0.25
Bottom distributor d90 ; 2x8-arm
63”
1218
564
53
0.25mm
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 18
2015/Overflow and manual control valves
Part No.
Products
Max. flow rate /
Backwash
Tank
In /out
Drain
RX-ATF34
In line valve, 2.5” top connection,
With top distributor and CP35
2 m3/h
2 m3/h
6-10”
3/4”
3/4”
RX-ATF1
In line valve, 2.5” top connection,
With top distributor and CP35
3 m3/h
3 m3/h
6-12”
1”
1”
RX-ATF2
In line valve, 4” top connection,
Without top and bottom distributor
16 m3/h
16 m3/h
14-36”
2”
2”
CA-ATF38
In line valve, 2.5” top connection,
With top distributor and CP35
0.5 m3/h
0.5 m3/h
6-10”
3/8”
3/8”
CA-ATF12
In line valve, 2.5” top connection,
With top distributor and CP35
1 m3/h
1 m3/h
6-10”
1/2”
1/2”
CA-ATF34
In line valve, 2.5” top connection,
With top distributor and CP35
2 m3/h
2 m3/h
6-12”
3/4”
3/4”
CA-ATF1
In line valve, 2.5” top connection,
With top distributor and CP54
2.5 m3/h
2.5 m3/h
6-12”
1”
1”
RX-56F-MHF
CA-ATF34
RX-ATF1
RX-ATF34
RX-ATF1
RX-ATF2
RX-56D-MHF/TM
Part No.
Products
Max. flow
rate /
Backwash
Tank
In /out
Drain
RX-56E-MHF
Manual filter valve 3/4", top connection - 2,5"
2 m3/h
2 m3/h
6-10”
3/4”
3/4”
RX-56F-MHF
Manual filter valve 1", top connection - 2,5" d32 distributors needed from page 60.
6 m3/h
6 m3/h
6-16”
1”
1”
RX-56D-MHF
Manual filter valve 2", top connection - 4"
10 m3/h
10 m3/h
14-30”
2”
1 ½”
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 19
2015/Filtering control valves
Part No.
Products
Max. flow
rate /
Backwash
Vessel
In / Out
Drain
RX-67B-DTF
Automatic time controlled filter valve 1", top
connection - 2,5"
6 m3/h
6 m3/h
6-16”
1”
1”
RX-67C-DTF
Automatic time controlled filter valve 1", top
connection - 2,5" - NEW DISPLAY
6 m3/h
6 m3/h
6-16”
1”
1”
RX-75A-DTF
Automatic time controlled filter valve 2", top
connection - 4"
10 m3/h
10 m3/h
14-36”
2”
1 ½”
RX-77A-DTF
Multi-functional Flow Control Valve
2" (Automatic Softener Valve), top connection 4"
18 m3/h
18 m3/h
21-42”
2”
1 ½”
RX-78SM-DVS
Multi-functional Flow Control Valve DN65
(Automatic Softener Valve), side mounted
40 m3/h
30 m3/h
30-63”
DN65
(d75)
DN65
(d75)
RX-67C-DTF
RX-67B-DTF
RX-75A-DTF
RX-77A-DTF
RX-78SM-DVS
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 20
2015/Water softener control valves
Part No.
Products
Max. flow
rate /
Backwash
Vessel
In /out
Drain
RX-64AMHS
Manual softener valve 1", top connection - 2,5"
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-64DMHS
Manual softener valve 2", top connection - 4"
10 m3/h
6 m3/h
14-30”
2”
1”
RX-ADJ
Control box for RX-65C-DHS control valve
(by USB port)
RX-65CDHS
Semi-automatic softener valve 3/4", top
connection - 2,5"
3/4”
½”
-
2 m3/h
2 m3/h
6-12”
RX-ADJ
RX-64A-MHS
RX-64D-MHS
RX-65C-DHS
Part No.
Products
Max. flow
rate /
Backwash
Vessel
In /out
Drain
RX-65ADVS
Automatic, volume controlled softener valve
without by-pass 3/4", top connection - 2,5"
2 m3/h
2 m3/h
6-12”
3/4”
½”
RX-65BDVS
Automatic, volume controlled softener valve with
by-pass 3/4", top connection - 2,5"
2 m3/h
2 m3/h
6-12”
3/4”
½”
RX-63ADVS
Automatic, volume controlled softener valve
without by-pass 1", top connection - 2,5"
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-63BDVS
Automatic, volume controlled softener valve with
by-pass 1", top connection - 2,5"
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-65A-DVS
RX-65B-DVS
RX-63B-DVS
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 21
2015/Water softener control valves
Part No.
Products
Max. flow
rate /
Backwash
Vessel
In /Out
Drain
RX-65ADTS
Automatic, time controlled softener valve without
by-pass 3/4", top connection - 2,5"
2 m3/h
2 m3/h
6-12”
3/4”
½”
RX-65CDVS
Automatic, volume controlled softener valve
without by-pass 3/4", top connection - 2,5"
2 m3/h
2 m3/h
6-12”
3/4”
½”
RX-65DDVS
Automatic, volume controlled softener valve with
by-pass 3/4", top connection - 2,5"
2 m3/h
2 m3/h
6-12”
3/4”
½”
RX-63ADTS
Automatic, time controlled softener valve without
by-pass 1", top connection - 2,5"
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-63CDVS
Automatic, volume controlled softener valve
without by-pass 1", top connection - 2,5"
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-63DDVS
Automatic, volume controlled softener valve with
by-pass 1", top connection - 2,5"
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-65A/DTS
RX-65C/DVS
RX-65D/DVS
RX-63A/DTS
RX-63C/DVS
RX-63D/DVS
Part No.
Products
A
B
H
In / Out
Flow rate
at 3 bar
RX-F70A-1
By-pass valve for
RX-63 valves—1”
165 mm
165 mm
118 mm
1”
4.0
RX-F70B-34
By-pass valve for
RX-65 valves—3/4”
116/111 mm
140 mm
80 mm
3/4”
2.0
Nominal pressure: 0,5 bar ~ 6 bar; Suitable temperature: 5°C ~ 50°C
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 22
2015/Water softener control valves
Part No.
Products
Max. flow
rate /
Backwash
Vessel
In /Out
Drain
RX-79BDVS
Automatic, digital volume controlled softener valve with
built-in by-pass 3/4" - raw water during regeneration,
top connection - 2,5"
2 m3/h
2 m3/h
6-12”
3/4”
½”
RX-82BDVS
Automatic, digital volume controlled softener valve with
built-in by-pass 1" - raw water during regeneration, top
connection - 2,5"
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-79BDVS-EC
6 language, digital volume controlled softener valve with
built-in by-pass 3/4" - raw water during regeneration,
top connection - 2,5"
2 m3/h
2 m3/h
6-12”
3/4”
½”
RX-82BDVS-EC
6 language, digital volume controlled softener valve with
built-in by-pass 1" - raw water during regeneration, top
connection - 2,5"
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX/GYAF
Resin sterilizer unit for RX-79B/DVS and RX-82B/DVS
RX-79B-DVS
RX-82B-DVS
6 languages for EC valves:
 English
RX-82B-DVS, RX-79B-DVS
 Blue led display


3/8”
-





Intelligent up-flow regeneration
Inlet by-pass
Hungarian
Czech
Serbian
Deutsch
Romanian
Part No.
Products
A
B
H
In / Out
Flow rate
at 3 bar
RX-F70C-1
By-pass valve for
RX-82 valves—1”
218 mm
126 mm
95 mm
1”
4.0
RX-F70D-34
By-pass valve for
RX-79 valves—3/4”
220 mm
120 mm
90 mm
3/4”
2.0
RX-F70C-1
RX-F70D-34
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 23
2015/Water softener control valves
RX-74A-DVS
RX-77A-DVS
RX-78SM-DVS
Part
No.
Products
Max. flow
rate /
Backwash
Vessel
In /
out
Drain
RX-74ADVS
Automatic, volume controlled softener
valve 2", top connection - 4"
10 m3/h
6 m3/h
14-36”
2”
1”
RX-77ADVS
Multi-functional Flow Control Valve
2" (Automatic Softener Valve), top
connection - 4"
18 m3/h
18 m3/h
21-42”
2”
1.5”
RX-78SM
-DVS
Multi-functional Flow Control Valve
DN65 (Automatic Softener Valve),
side mounted
40 m3/h
30 m3/h
30-63”
2.5”
2.5”
Part No.
Products
Max. flow
rate
Vessel
In /
out
Drain
RX-86/MB
Mixed Bed water treatment control
valve with 5pcs. ball valves,
regeneration: HCl/NaOH
2 m3/h
8-12”
3/4”
3/4”
RX-87/MB
Mixed Bed water treatment control
valve with 5pcs. ball valves,
regeneration: HCl/NaOH
4 m3/h
14-16”
1”
3/4”
RX-86/MB
RX-88A-DVS
RX-73A-DVS
Part No.
Products
Max. flow
rate
Vessel
In /out
Drain
RX-73A-DVS
Volume controlled duplex softener valve
top mounted
3.5 m3/h
6-16”
1”
1/2”
RX-88A-DVS
Volume controlled duplex softener valve,
side mounted
10 m3/h
18-30”
1.5”
1/2”
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 24
2015/Water softener control valves
Part No.
Products
Max. flow
rate /
Backwash
Vessel
In /Out
Drain
RX-65AB1-DVS
Volume controlled twin softener valve
(2pcs RX-65C-DVS+communication cable)
2,0 m3/h
2,0 m3/h
6-12”
3/4”
½”
RX-63AB1-DVS
Volume controlled twin softener valve
(2pcs RX-63C-DVS+communication cable)
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-74AB1-DVS
Volume controlled twin softener valve
(2pcs RX-74A-DVS+communication cable)
10 m3/h
6 m3/h
14-36”
2”
1”
RX-77AB1-DVS
Volume controlled twin softener valve
(2pcs RX-77A-DVS+communication cable)
18 m3/h
18 m3/h
21-42”
2”
11/2”
Volume controlled twin softener valve
(2pcs RX-78A-DVS+communication cable)
40 m3/h
30 m3/h
30-63”
d75
DN65
(d75)
RX-78AB1-DVS
RX-74A-DVS
RX-77A-DVS
RX-78SM-DVS
Part No.
Products
Max. flow
rate /
Backwash
Vessel
In
Out
Drain
RX-65AB2-DVS
Volume controlled duplex softener valve
(2pcs RX-65C-DVS+communication cable+3-way-valve)
2,0 m3/h
2,0 m3/h
6-12”
3/4”
½”
RX-63AB2-DVS
Volume controlled duplex softener valve
(2pcs RX-63C-DVS+communication cable+3-way-valve)
4,5 m3/h
3,5 m3/h
6-18”
1”
½”
RX-74AB2-DVS
Volume controlled duplex softener valve
(2pcs RX-74A-DVS+communication cable+3-way-valve)
10 m3/h
6 m3/h
14-36”
2”
1”
RX-77AB2-DVS
Volume controlled duplex softener valve
(2pcs RX-77A-DVS+communication cable+3-way-valve)
18 m3/h
18 m3/h
21-42”
2”
11/2”
RX-78AB2-DVS
Volume controlled duplex softener valve
(2pcs RX-78A-DVS+communication cable+3-way-valve)
40 m3/h
30 m3/h
30-63”
d75
DN65
(d75)
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 25
2015/Control valve accessories
Part
number
Products
Nominal
pressure
In / Out
Connection
Max. flow
rate
Power
TM-F80-2
RX 3 way motorized valve
6 bar
2”
20 m3/h
DC 24V
15W
Functions:
 B is water inlet. A, C water outlet
 This valve could exchange water flow
from B —> A to B —> C, or closure
(three ports are not connected)
Usage:
 The motor valve is controlled by PLC
 Green wire is connected to power cathode.
When red wire is connected to power anode, Valve A port is connected to B port.
When yellow wire is connected to the anode, three ports are not connected, valve is in close
state. When blue wire is connected to the anode, port C is connected to port B.
Part
number
Products
Power
TM-F70-2
RX controller, syncronises the valves operation
(one or two valves in service and one standby)
230V, 50Hz
TM-F70-2
Part number
Products
PVC-rag
PVC-U Tangit glue—1kg
PVC-tis
PVC-U/C ABS Tangit cleaner—1kg
Part
number
Products
RX-WR
RX service wrench
Part
number
Products
RX-P19
2,5" height increaser connector
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 26
2015/Accessories necessary to complete RX valve
To complete the control valve you have to choose one part from each table !
Part
number
Top distributors
P01/34
Top distributor d25
P01/1
Top distributor d32 - only for RX-56F-MHF valve
Top distributor for 2” or bigger RX valves please choose from page 60–63.
Part
number
Bottom distributors
CP17
Bottom distributor d25 with central pipe for 17” vessel
CP35
Bottom distributor d25 with central pipe for 35” vessel
CP54
Bottom distributor d25 with central pipe for 54” vessel
CP65
Bottom distributor d25 with central pipe for 65” vessel
P02/1
Bottom distributor d32 - only for RX-56F-MHF valve
P02/34
Bottom distributor d25
310077P
1.05” - PVC Pipe
Bottom distributor for 2” or bigger RX valves please choose from page 60–63.
CP17
CP35
CP54
CP65
1600-BV
434-BV-L80
Part
number
Brine suction valve
1600-BV
Air Check with 3/8” elbow lenght - 35”
1800-BV
Air Check with 3/8” elbow lenght - 44”
434-BV-L80
Brine valve with 3/8” elbow, lenght - 35”
434-BV-L110
Brine valve with 3/8” elbow, lenght - 44”
1700-BVC
Air Check with 1/2” elbow lenght - 1500 mm
454-BV
Brine valve with 1/2” elbow lenght - 1100 mm
Part
number
Brine suction pipe
I8065-1
PE pipe 3/8”
I8065-1-T
Transparent PE pipe 3/8”
I8081
PE pipe 1/2”
454-BV 1700-BVC
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 27
2015/Diaphragm valves
Part No.
Products
In / Out
Con.
type
Body
material
Dimension
LxWxH
(mm)
Net
weight
kg
Service
flow rate
p=0,2bar
Backwash
flow rate
Noryl
260 x 110
x 170
1.1
18 m3/h
26 m3/h
p=0,5bar
VS63-O
Individual diaphragm
valve
DN50
Ø63
ABS
bonded
joint
VS90-O
Individual diaphragm
valve
DN80
Ø90
Flange
Noryl
350 x 190
x 300
3.56
45 m3/h
66 m3/h
VS110-O
Individual diaphragm
valve
DN100
Ø110
Flange
Reinforced
PA
320 x 220
x 350
6.83
120 m3/h
170 m3/h
Notations
O—normally opened
Working pressure: 1-8bar
Temperature:
4-50°C
All valves are equipped with spring!
VS90-O
VS63-O
Part No.
Products
In / Out
connection
WFS-50
Water flow sensor with DN50 pipeline installation kit.
DN50
Ø63
WFS-80
Water flow sensor with DN80 pipeline installation kit.
WFS-100
Water flow sensor with DN100 pipeline installation kit.
DN80
Ø90
DN100
Ø110
Our water flow sensors are basically recommended for our IVC controllers (on page 80)
however if you use a different controller the accuracy is not guaranteed!
Water flow sensor performance and parameters:
Liquid velocity measurement range:
Measuring liquid temperature range:
Measuring pipe size range:
Linear error:
Accumulated error:
Own wire length:
Signal transmission cable length:
Probe body material:
Impeller material:
Bearing material:
Response frequency:
Probe power supply voltage:
Probe signal output form:
Probe signal power supply current:
Probe signal output current:
Probe working pressure and temperature range:
1—5m/s
1—60℃
DN50—DN100
±4%
±4%
5 metres
within 300 metres
nylon
PVDF
316LL
≤120Hz
9-12VDC
pulsed square wave
20mA@9-12VDC
≤20mA
1°C—60°C; 6 Bar
WFS-80
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 28
2015/Individual valve controller
Part No.
Products
IVC-A
Individual filter valve controller to regulate 5 pcs valves.
The controller is able to do the backwash with raw or treated water.
IVC-B
Individual softener valve controller to regulate 6 pcs valves.
One example of possibile applications:
Function
Opened valves
Service
Backwash
Brine+slow rinse
Rinse
1,2
3,4
5,6
1,6
Individual valve controller function introduction:
IVC multi valve controller is special designed for the filtration, water conditioning, softening and
desalination system which consists of multi valves.
The operating medium of IVC valve is either air or water.
- Power: 150~250V/AC, 50/60Hz, 4W;
- English version, setting simplicity, No complicated programming languages ability needed to operate;
- Password Protection design prevents parameter setting from arbitrary and unexpected alteration;
IVC-B
- Flexible regeneration initiation modes (Volume, Remote, Interval, Week Timing, Remote control
regeneration).
The selection of regeneration modes depends on specific technical and systemic conditions. Under special circumstances (e.g., on-site
debugging), also can be forced manually start the regeneration, and regeneration can be forced to interrupt at any time or to skip any step, and
so on.
- LCD display with backlight for over ten years use and state display function on panel;
- Regeneration and relevant outputs signals are all Relay Dry Contractor; AC 220/5A;
- Various parameters can be set: e.g. date and time, regeneration mode, regeneration process, business lock and connect internet, and so on
- IVC controller equips two logic level control with Relay Dry Contractor output;
- Commercial lock. Please contact our technical pers onnel for detailed usage.
- Many units parallel function. At the same time it can be guaranteed that there only one unit in regeneration among many units, which can
ensure the continuity of the system of water well. Parallel function in a D mode to use for the many units run and one standby. E model is
regenerative independently, regeneration in order , water immediately go to the water maker process after regeneration.
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 29
2015/Individual valve system
Part No.
Products
Inlet
and
outlet
Backwash
inlet and
drain
Dimension
LxWxH
(mm)
Service
flow rate
p=0,4bar
Backwash
flow rate
p=1,0bar
IFVS63/63
Automatic time controlled individual
filter valve system with 5pcs
individual diaphragm valves
DN50
Ø63
DN50
Ø63
500 x 1000 x 1900
18 m3/h
26 m3/h
IFVS63/90
Automatic time controlled individual
filter valve system with 5pcs
individual diaphragm valves
DN50
Ø63
DN80
Ø90
500 x 1000 x 1900
18 m3/h
66 m3/h
IFVS90/90
Automatic time controlled individual
filter valve system with 5pcs
individual diaphragm valves
DN80
Ø90
DN80
Ø90
500 x 1000 x 1900
45 m3/h
66 m3/h
IFVS90/110
Automatic time controlledi ndividual
filter valve system with 5pcs
individual diaphragm valves
DN80
Ø90
DN100
Ø110
500 x 1000 x 1900
45 m3/h
170 m3/h
IFVS110/110
Automatic time controlled individual
filter valve system with 5pcs
individual diaphragm valves
DN100
Ø110
DN100
Ø110
500 x 1000 x 1900
120 m3/h
170 m3/h
The controller of filter able to do the backwash with raw or treated water. Normally the backwash of filter is done by treated water.
When customer requests tha backwash of filter can be done by raw water without charge.
Accessories:




Stainless steel frame
5pcs individual diaphragm valves
IVC-B controller
PVC pipeline
Working pressure:
Temperature:
1-8bar
4-50°C
Status of valves
Function
1
2
3
4
5
Service
Open
Close
Close
Close
Open
Backwash
Close
Open
Close
Open
Close
Rinse
Open
Close
Open
Close
Close
IVFS63/90
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 30
2015/Individual valve system
Part No.
Products
Inlet
and
outlet
Backwash
inlet and
drain
Dimension
LxWxH
(mm)
Service
flow rate
p=0,4bar
Backwash
flow rate
p=1,0bar
ISVS63/63
Automatic volume and time controlled
individual softener valve system with
6pcs individual diaphragm valves
DN50
Ø63
DN50
Ø63
500 x 1000 x
2300
18 m3/h
26 m3/h
ISVS90/90
Automatic volume and time controlled
individual softener valve system with
6pcs individual diaphragm valves
DN80
Ø90
DN80
Ø90
500 x 1000 x
2300
45 m3/h
66 m3/h
ISVS110/110
Automatic volume and time controlled
individual softener valve system with
6pcs individual diaphragm valves
DN100
Ø110
DN100
Ø110
500 x 1000 x
2300
120 m3/h
170 m3/h
The controller of filter able to do the backwash with raw or treated water. Normally the backwash of filter is done by treated
water. When customer requests tha backwash of filter can be done by raw water without charge.
Accessories:





Stainless steel frame
6pcs individual diaphragm valves
1pc water flow sensor
PVC pipeline
IVC-B controller
Working pressure:
Temperature:
1-8bar
4-50°C
Status of valves
Function
1
2
3
4
5
6
Service
Close Open Close Close Close Open
Backwash
Open Close Close Open Close Close
Brine+slow rinse
Close Close Open Close Open Close
Rinse
Close Open Close Close Open Close
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 31
2015/Brine tanks, cabinets
BT603-25
BT604-350
BT601-70
BT605-500
BT608-1500
BT606-750
BT603-200
Part number
Products
BT600-25
BT601-70
Brine tank, grid, brine well, 25 L
Brine tank, grid, brine well, 70 L
Size (mm)
HxWxL
440 x 285 x 285
815 x 400 x 400
BT602-145
Brine tank, grid, brine well, 145 L
875 x 460 x 460
BT603-200
Brine tank, grid, brine well, 200 L
1160 x 550 x 550
BT604-350
Brine tank, grid, brine well, 350 L
1275 x 740 x 740
BT605-500
Brine tank, grid, brine well, 500 L
1335 x 840 x 840
BT606-750
Brine tank, grid, brine well, 750 L
1395 x 960 x 960
BT607-1000
Brine tank, grid, brine well, 1000 L
1460 x 1080 x 1080
BT608-1500
Brine tank, grid, brine well, 1500 L
1575 x 1240 x 1240
PA003
Brine well for Mini cabinets
-
PA005
Brine well for Maxi cabinets
-
PA007
Brine well for Maxi slim cabinets
-
PA558+PV006
Slim Mini Junior cab. with 7x13 without base tank
330 x 230 x 430
PA555+PV012
Slim Mini cabinet with 8x17 without base tank
640 x 225 x 440
PA556+PV014
Slim Midi cabinet with 8x35 without base tank
1110 x 225 x 440
PA557+PV020
Slim Maxi cabinet with 8x44 without base tank
1330 x 225 x 440
PA210
Mini Crystal cabinet
690 x 340 x 520
PA235
Maxi Crystal cabinet
1150 x 340 x 520
H7000
Overflow elbow for 25-350 liter brine tanks
BT602-145
Slim cabinets
Crystal cabinets
H7000
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 32
2015/Filtering media
Part number
Product
Function
Quantity
(1 bag)
A8006
Birm
Iron removal filter media
28.3 liter
A8030
Pyrolox
Iron and manganese removal
filter media
27.2 kg
13.6 liter
A8042
Greensand plus
Iron and manganese removal
filter media
14.2 liter
ECOMIX-A
ECOMIX-A
Softener, ammonia-, iron-,
manganese-, organic removal
25 liter
ECOMIX-C
ECOMIX-C
Softener, ammonia-, iron-,
manganese-, organic removal
25 liter
GAC-0830-800
Activated carbon - 8x30
Size: 0,6—2,3 mm,
Iodin number: 800 mg/g
25 kg
56 liter
GAC-0830-950
Activated carbon - 8x30
Size: 0,6—2,3 mm
Iodin number: 950 mg/g
25 kg
56 liter
KDF-55C
Chlorine
Bacteria and heavy metal
removal filter media
25,9 kg
9,6 liter
RA061
Antracit
Suspended solids removal,
reduce turbidity
25 kg
26,4 liter
RA068
GEH
Arsenic removal filter media
33 kg
30 liter
A8023
Turbidex (Filter AG Plus)
Solids, ammonia and heavy
metal removal filter media
28.3 liter
Part number
Products
Per bag
SK-2-4
Filter gravel, 2-4mm
25 kg
SK-1-2
Filter gravel, 1-2mm
20 kg
SK-0.5-1.2
Filter gravel, 0.5-1.2mm
20 kg
SK-0.4-0.8
Filter gravel, 0.4-0.8mm
20 kg
SF-PHOS
Poliphosphate scaling inhibitor media (kg)
20 kg
Part number
Products
Qty/bag
Bag/pal
PC002-FG
Pure strong cation resin food grade
25 liter
PC002-IG
Pure strong cation resin industrial grade
25 liter
PA102
Pure strong anion resin
25 liter
PMB101-2
Pure Mixed bed resin
25 liter
PA202
Pure Nitrate selective resin
25 liter
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 33
2015/Membranes
Part no.
Products
Size
Average rejection
Power/Pressure
TFC-50V
(ULP1812-50)
Vontron 50GPD dry osmosis
membrane
1,8”x12”
97%
50GPD / 60PSI
( 189L/day / 4,1bar )
TFC-75V
(ULP1812-75)
Vontron 75GPD dry osmosis
membrane
1,8”x12”
97%
75GPD / 60PSI
( 283L/day / 4,1bar )
TFC-100V
(ULP2012-100)
Vontron 100GPD dry osmosis
membrane
2”x12”
95%
100GPD / 60PSI
( 377L/day / 4,1bar )
TFC-300V
(ULP3012-240)
Vontron 300GPD dry osmosis
membrane
3”x12”
97%
240GPD / 100PSI
( 910L/day / 6,9bar )
VNF2-1812
Vontron 50GPD dry nano
membrane
1,8”x12”
50-70% NaCl
80% - CaCl2
50GPD / 30PSI
( 190L/day / 2 bar )
VNF2-2012
Vontron 85GPD dry nano
membrane
2”x12”
50-70% NaCl
80% - CaCl2
85GPD / 30PSI
( 320L/day / 2 bar )
Part no.
Products
Size
Minimum
Rejection
Average
rejection
Power/Pressure
Membrane
active area
ULP21-2521
RO membrane
ULP
2.5”x21”
98,5%
99%
300GPD / 150PSI
( 1134L/day / 10,3bar )
1,1 m2
ULP21-2540
RO membrane
ULP
2.5”x40”
98,5%
99%
750GPD / 150PSI
( 2840L/day / 10,3bar )
2,6 m2
ULP21-4021
RO membrane
ULP
4”x21”
98,5%
99%
950GPD / 150PSI
( 3600L/day / 10,3bar )
3,3 m2
ULP21-4040
RO membrane
ULP
4”x40”
98,5%
99%
2500GPD / 150PSI
( 9500L/day / 10,3bar )
7,9 m2
ULP22-8040
RO membrane
ULP
8”x40”
98,5%
99%
12100GPD / 150PSI
( 45700L/day / 10,3bar )
37 m2
ULP32-8040
RO membrane
ULP
8”x40”
99,0%
99,5%
10500GPD / 150PSI
( 39700L/day / 10,3bar )
37 m2
LP21-4040
RO membrane LP
4”x40”
99,3%
99,5%
2400GPD / 225PSI
( 9500L/day / 15,5bar )
7,9 m2
LP22-8040
RO membrane LP
8”x40”
99,3%
99,5%
10500GPD / 225PSI
( 39700L/day / 15,5bar )
37 m2
SW21-4040
RO membrane
For seawater
4”x40”
99,5%
99,5%
1200GPD / max.1000PSI
(4500L/day / max.69bar)
7,4 m2
SW22-8040
RO membrane
For seawater
8”x40”
99,5%
99,7%
6000GPD / max. 1000PSI
( 22700L/day / max. 69bar )
37 m2
FR11-4040
Vontron fouling
res. Membrane
4”x40”
99,3%
99,5%
2200GPD / 225 PSI
( 8300L/day / 15,5 bar )
8,4 m2
FR11-8040
Vontron fouling
res. membrane
8”x40”
99,3%
99,5%
9600GPD / 225 PSI
( 36300L/day / 15,5 bar )
33,9 m2
VNF1-4040
Vontron dry nano
membrane
4”x40”
40-60% NaCl
96% - CaCl2
-
2000-2400GPD / 70PSI
( 7500-9100L/day / 5bar )
7,4 m2
VNF2-4040
Vontron dry nano
membrane
4”x40”
80-95% NaCl
96% - CaCl2
-
1400-1800GPD / 70PSI
( 5300-6800L/day / 5bar )
7,4 m2
VNF1-8040
Vontron dry nano
membrane
8”x40”
40-60% NaCl
96% - CaCl2
-
10000-12000GPD / 70PSI
( 37500-45500L/day / 5bar )
37,2 m2
VNF2-8040
Vontron dry nano
membrane
8”x40”
80-95% NaCl
96% - CaCl2
-
7500-9000GPD / 70PSI
( 28400-33900L/day / 5bar )
37,2 m2
Notations:
ULP
LP
SW
VNF
FR
—
—
—
—
—
Ultra Low Pressure
Low Pressure
Sea Water
Nano Filtration
Fouling resistant
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 34
2015/Membrane houses
Part no.
Products
Size
Material
Max.
pressure
YT-25
RO membrane house
with plug
(1,8”-2”)
x 12”
EPDM
6 bar
YT-3-38W
RO membrane house
with plug
3” x 12”
EPDM
6 bar
Part no.
Products
Size
Material
Max.
pressure
BNSS2521/ABS
RO membrane house with plug
2,5” x 21”
SS / ABS
12 bar
BNSS4021/ABS
RO membrane house with plug
4” x 21”
SS / ABS
12 bar
BNSS2540/ABS
RO membrane house with plug
2,5” x 40”
SS / ABS
12 bar
BNSS4040/ABS
RO membrane house with plug
4” x 40”
SS / ABS
12 bar
BNSS4080/ABS
RO membrane house with plug
4” x 80”
SS / ABS
12 bar
SS / ABS membrane houses
Fiberglass membrane houses
Part no.
Products
Size
Material
Max.
pressure
EA300
RO membrane house with plug
8”x40”
Fibreglass
21 bar
EA301
RO membrane house with plug
8”x80”
Fibreglass
21 bar
EA302
RO membrane house with plug
8”x120”
Fibreglass
21 bar
EA305
RO membrane house with plug
8”x240”
Fibreglass
21 bar
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 35
2015/Accessories for RO system
Part number
Products
Measuring
parameters
CM-230A
Conductivity measuring instrument with probe and LCD digital display.
Probe connection: 1/2” ; Outline dimension: 48x96x100mm
Slot dimension for installation: 45x91mm
0-199.9 µS/cm
CCT-3320
Conductivity measuring instrument with probe and LCD digital display.
Probe connection: 1/2” ; Outline dimension: 48x96x100mm ,
Slot dimension for installation: 45x91mm ; Hi-limited alarm setting
0-199.9 µS/cm
CCT-3320-GS
Conductivity measuring instrument with graphit probe and LCD digital display. Probe
connection: 1/2” ; Outline dimension: 48x96x100mm ,
Slot dimension for installation: 45x91mm ; Hi-limited alarm setting,
See page 67 for more information
0-19.99 mS/cm
CM-230A , CCT-3320 , CCT-3320-GS
ROC-2313
Part
number
ROC-8320
Products
Industrial RO system controller with on-line conductivity measuring instrument and LCD display.
Power voltage: AC 220V±15% 50Hz
Power consumption: ≤3W
ROC8320
Environment conditions:
Temperature: 0～50℃
Humidity: ≤85%RH
Measuring range: 0～200μS /cm
Accuracy: 1.5 level
Load capacity of output contact: 3A/250V AC (the magnetic valve should be driven through intermediate relay)
Operation pressure of conductance cell: 0～0.5 Mpa
Electrode selected: 1.0cm-1
Outline dimensions: 96×96×105 mm (height × width × depth)
Meter board hole: 91×91mm (height × width)
Industrial RO system controller with on-line conductivity measuring instrument. The graphical control panel with
LED indicator lamp embedded; multiple groups of parameters can be set and modified, the requirements of
automatic operation are met.
Power voltage: AC 220V±15% 50Hz
Power consumption: ≤3W
ROC2313
Environment conditions:
Temperature: 0～50℃
Humidity: ≤85%RH
Measuring range: 0～200μS /cm
Accuracy: 1.5 level
Load capacity of output contact: 3A/250V AC
Operation pressure of conductance cell: 0～0.5Mpa
Display mode: 3 1/2-digit LED digital display
Electrode selected: 1.0cm-1
Outline dimensions: 96×96×110 mm (height × width × depth)
Meter board hole: 91×91 mm (height × width)
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 36
2015/Accessories for RO system
EA031
Part number
Name
Size
EA031
RO membrane connection
coupling
1.5”
EA053
Threaded part for EA031
coupling
1.5”
Part number
Name
Range
MM-63/25
Manometer, 1/4” back
connection d63 size, glicerine
0-25
bar
MM-63/16
Manometer, 1/4” back
connection d63 size, glicerine
0-16
bar
MM-63/6
Manometer, 1/4” back
connection d63 size, glicerine
0-6 bar
MM-50/10H
Manometer, 1/4” back
connection d50 size
0-10
bar
MM-50/10A
Manometer, 1/4” bottom
connection d50 size
0-10
bar
MM-RK
Manometer fixing
-
EA053
MM-63/16
Part
number
Products
Measuring
parameters
Numbers
of measure
SDI-TEST
Test set for SDI measuring
with membrane
SDI
25
SDI-MEM
Replacement membrane for SDI test
set
-
25 pcs/ set
MV-12
ES-18C
Part
number
Name
Basic
status
MV-38
Magnetic valve with coil 3/8” max. 80°C;
max. 10 bar; Δp 0,3 bar; NBR membrane
Closed
MV-12
Magnetic valve with coil 1/2”max. 80°C;
max. 10 bar; Δp 0,3 bar; NBR membrane
Closed
MV-34
Magnetic valve with coil 3/4” max. 80°C;
max. 10 bar; Δp 0,3 bar; NBR membrane
Closed
MV-10
Magnetic valve with coil 1” max. 80°C;
max. 10 bar; Δp 0,3 bar; NBR membrane
Closed
MV-54
Magnetic valve with coil 5/4”max. 80°C;
max. 10 bar; Δp 0,3 bar; NBR membrane
Closed
MV-64
Magnetic valve with coil 6/4”max. 80°C;
max. 10 bar; Δp 0,3 bar; NBR membrane
Closed
MV-20
Magnetic valve with coil 2”max. 80°C;
max. 10 bar; Δp 0,3 bar; NBR membrane
Closed
MV-25
Magnetic valve with coil 2,5”max. 80°C;
max. 10 bar; Δp 0,3 bar; NBR membrane
Closed
ES-18O
Pressure switch 1/8”
adjustable between: 1-10bar with rubber cap
Opened brown
ES-18C
Pressure switch 1/8”
adjustable between: 1-10bar with rubber cap
Closed black
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 37
2015/Rotameters
Part
number
RM-PM1
RM-PM2
RM-PM5
RM-PM10
RM-PM20
RM-PMV1
RM-PMV2
RM-PMV5
RM-PMV10
RM-PMV20
Name
Flow
Rotameter, 1 GPM,
panel mounted
Rotameter, 2 GPM,
panel mounted
Rotameter, 5 GPM,
panel mounted
Rotameter, 10 GPM,
panel mounted
Rotameter, 20 GPM,
panel mounted
Rotameter, 1 GPM, panel
mounted with flow control
Rotameter, 2 GPM, panel
mounted with flow control
Rotameter, 5 GPM, panel
mounted with flow control
Rotameter, 10 GPM, panel
mounted with flow control
Rotameter, 20 GPM, panel
mounted with flow control
1 GPM
(226 l/h)
2 GPM
(454 l/h)
5 GPM
(1134 l/h)
10GPM
(2260l/h)
20GPM
(4540l/h)
1 GPM
(226 l/h)
2 GPM
(454 l/h)
5 GPM
(1134 l/h)
10GPM
(2260l/h)
20GPM
(4540l/h)
A
B
C
E
F
G
H
J
176
32
35
27
127
76
1/2”
1/4”
176
32
35
27
127
76
1/2”
1/4”
176
32
35
27
127
76
1/2”
1/4”
236
45
46
34
165
102
1”
Ø23
236
45
46
34
165
102
1”
Ø23
176
32
35
27
127
76
1/2”
1/4”
176
32
35
27
127
76
1/2”
1/4”
176
32
35
27
127
76
1/2”
1/4”
236
45
46
34
165
102
1”
Ø23
236
45
46
34
165
102
1”
Ø23
Material of flow meters is Acrylic
RM-FL-60
RM-FL-60
RM-PMV20
RM-PM20
Part
number
Name
Flow
L
d
RM-FL-0,16
Rotameter, In-line
16-160 l/h
200
20
RM-FL-0,4
Rotameter, In-line
40-400 l/h
200
20
RM-FL-1
Rotameter, In-line
100-1000 l/h
226
32
RM-FL-1,6
Rotameter, In-line
160-1600 l/h
226
32
RM-FL-3
Rotameter, In-line
300-3000 l/h
226
32
RM-FL-6
Rotameter, In-line
600-6000 l/h
288
40
RM-FL-10
Rotameter, In-line
1000-10000 l/h
341
63
RM-FL-25
Rotameter, In-line
5-25 m3/h
430
75
RM-FL-60
Rotameter, In-line, flanged connection
12-60 m3/h
540
DN65
RM-FL-120
Rotameter, In-line, flanged connection
16-120 m3/h
555
DN10
0
Tube connection material: ABS
Bottom & Top Shaft material: HIPE
Guide rod material: 316SS
Maximum pressure: ≤ 6 bar
Screw material: ABS
Float material: ABS
Accuracy: ±4%
Max temp.: 0-40°C
O-shape sealing ring material: silicon
Body material: AS
Medium-Water
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 38
2015/RO booster pumps
Part
number
Products
DE806RO200
DE808RO350
DE810RO700
DE814RO1000
RO booster pump in copper house
with by-pass valve(PA201)
RO booster pump in copper house
with by-pass valve(PA301)
RO booster pump in copper house
with by-pass valve(PA801)
RO booster pump in copper house
with by-pass valve(PA1001)
In/out
Motor
rotate
Performance
9 bar
Performance
14 bar
3/8”
1400 RPM
205 l/h
185 l/h
3/8”
1400 RPM
340 l/h
330 l/h
1/2”
1400 RPM
690 l/h
675 l/h
1/2”
1400 RPM
1070 l/h
1030 l/h
DE806-RO200
Part
number
Products
Power
Motor
rotate
A
Input / phase
Booster
pump type
DE860
Motor for booster pump M71
370 W
1350 RPM
3.2 A
220V, 50Hz / 1
RO 200-350
DE862
Motor for booster pump M80
750 W
1350 RPM
5.4 A
220V, 50Hz / 1
RO 700-1000
Adapter M71
Adapter M80
Coupling M71
Part no.
Products
DE871
Adapter M71
DE873
Adapter M80
DE872
Coupling M71
DE874
Coupling M80
Coupling M80
Part number
Products
Flow @ 5 bar
Input
BC-RO600P-PUMP
Pressure booster pump
1,6 liter/min
-
BC-RO600P-AD
Adapter for booster pump
-
220V
BC-ROPUMP-0,5LPM
Pressure booster pump
0,55 liter/min
-
BC-ROPUMP-0,5LPM-AD
Adapter for pump
-
220V
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 39
2015/Grundfos horizontal multistage centrifugal pump
Part number
Product
code
Rated
power kW
Conn. In /
Out
CM-A-1-2
97516558
0,46
1” / 1”
CM-A-1-3
97516559
0,46
1” / 1”
CM-A-1-4
97514257
0,46
1” / 1”
CM-A-1-5
97516561
0,46
1” / 1”
CM-A-1-6
97516563
0,46
1” / 1”
CM-A-1-7
97516564
0,65
1” / 1”
CM-A-1-8
96967504
0,65
1” / 1”
CM-A-3-2
96974693
0,46
1” / 1”
CM-A-3-3
CM-A-3-4
CM-A-3-5
96974692
96807026
97516566
0,46
0,46
0,65
1” / 1”
1” / 1”
1” / 1”
CM-A-3-6
96807027
0,65
1” / 1”
CM-A-3-7
97516568
0,85
1” / 1”
CM-A-3-8
96807028
1,20
1” / 1”
CM-A-5-2
96807031
0,46
1¼” / 1”
CM-A-5-3
96807032
0,65
1¼” / 1”
CM-A-5-4
96974681
0,85
1¼” / 1”
CM-A-5-5
96807033
1,20
1¼” / 1”
CM-A-5-6
96807034
1,20
1¼” / 1”
CM-A-5-7
97516574
1,58
1¼” / 1”
CM-A-5-8
97509614
1,58
1¼” / 1”
CM-A-10-1
97516577
0,65
1½”/1½”
CM-A-10-2
96943345
1,20
1½”/1½”
CM-A-10-3
96943353
2,20
1½”/1½”
CM-A-10-4
96943360
3,20
1½”/1½”
CM-A-10-5
97509520
3,20
1½”/1½”
CM-A-15-1
97516580
1,20
2” / 2”
CM-A-15-2
97507756
2,20
2” / 2”
CM-A-15-3
96887467
4,00
2” / 2”
CM-A-15-4
97516582
5,80
2” / 2”
CM-A-25-1
97516584
2,20
2” / 2”
CM-A-25-2
97509107
4,00
2” / 2”
CM-A-25-3
97509106
5,80
2” / 2”
CM-A-25-4
97516585
7,40
2” / 2”
CM multistage centrifugal pumps
Horizontal centrifugal pump, non self-priming, with high efficiency electromotor
Supply voltage 3 x 220 - 240/380 - 415 \/, 50 Hz, lP 55, from 3 kW with PTC
Mechanical seal in basic version SiC / SiC, elastomers Viton (AQQV) or EPDM (AQQE).
Pump mounted on baseplate, with axial suction and radial discharge.
Pipe connection: R = Whitworth-thread Rp
CM A (C3511 iron) (Product Group: CW)
Wetted parts stainless steel (EN 1.4301/AISI 304) and cast iron.
Type key is: CM x-x A-R-I-E-AQQE F-A-A-N
For more information please check the Grundfos Product Center on http://www.product-selection.grundfos.com
Euro-Clear Ltd. 2015 Industrial Components Catalog
2015/Grundfos horizontal multistage centrifugal pump
Part
number
Product
code
Rated
power kW
Conn. IN/
OUT
CM-I-1-2
97514413
0,46
1” / 1”
CM-I-1-3
97515109
0,46
1” / 1”
CM-I-1-4
97515121
0,46
1” / 1”
CM-I-1-5
96807014
0,46
1” / 1”
CM-I-1-6
97515122
0,46
1” / 1”
CM-I-1-7
97515123
0,65
1” / 1”
CM-I-1-8
96976902
0,65
1” / 1”
CM-I-1-12
97515104
0,85
1” / 1”
CM-I-3-2
CM-I-3-3
CM-I-3-4
96961023
96961026
96961047
0,46
0,46
0,46
1” / 1”
1” / 1”
1” / 1”
CM-I-3-5
96961052
0,65
1” / 1”
CM-I-3-6
97515126
0,65
1” / 1”
CM-I-3-7
96807015
0,85
1” / 1”
CM-I-3-8
97515127
1,20
1” / 1”
CM-I-3-9
97644338
1,20
1” / 1”
CM-I-3-10
97576080
1,20
1” / 1”
CM-I-3-12
97574689
1,58
1” / 1”
CM-I-3-13
97574690
1,58
1” / 1”
CM-I-3-14
97515218
2,20
1” / 1”
Horizontal centrifugal pump, non self-priming, with high efficiency
electromotor
Supply voltage 3 x 220 - 240/380 - 415 V, 50 Hz, IP 55, from 3 kW with
PTC
Mechanical seal in basic version SiC / SiC, elastomers EPDM (AQQE).
Pump mounted on baseplate, with axial suction and radial discharge. Pipe
connection: R = Whitworth-thread Rp
Wetted parts stainless steel - pump shaft, Impellers/chambers (EN
1.4301/AISI 304)
Type key is: CM x-x A-R-I-E-AQQE F-A-A-N
For more information please check
the Grundfos Product Center on
http://www.product-selection.grundfos.com
Page number: 40
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 41
2015/Grundfos horizontal multistage centrifugal pump
Part
number
Product
code
Rated
power kW
Conn. IN/
OUT
CM-I-5-2
CM-I-5-3
96961054
96961057
0,46
0,65
1¼” / 1”
1¼” / 1”
CM-I-5-4
96961092
0,85
1¼” / 1”
CM-I-5-5
96961098
1,20
1¼” / 1”
CM-I-5-6
97507761
1,20
1¼” / 1”
CM-I-5-7
97515129
1,58
1¼” / 1”
CM-I-5-8
97515130
1,58
1¼” / 1”
CM-I-5-9
97571954
2,20
1¼” / 1”
CM-I-5-10
97644354
2,20
1½”/1½”
CM-I-5-11
97574705
2,20
1½”/1½”
CM-I-5-12
97574706
3,20
1½”/1½”
CM-I-5-13
97574707
3,20
1½”/1½”
CM-I-10-1
97515133
0,65
1½”/1½”
CM-I-10-2
96945992
1,20
1½”/1½”
CM-I-10-3
96945996
2,20
1½”/1½”
CM-I-10-4
96945979
3,20
1½”/1½”
CM-I-10-5
96945994
3,20
1½”/1½”
CM-I-10-6
97644355
4,00
1½”/1½”
CM-I-10-7
97574709
5,80
1½”/1½”
CM-I-10-8
97574710
5,80
1½”/1½”
CM-I-15-1
97515263
1,20
2” / 2”
CM-I-15-2
97515106
2,20
2” / 2”
CM-I-15-3
97515107
4,00
2” / 2”
CM-I-15-4
97515269
5,80
2” / 2”
CM-I-25-1
97515282
2,20
2” / 2”
CM-I-25-2
97509109
4,00
2” / 2”
CM-I-25-3
97509108
5,80
2” / 2”
CM-I-25-4
97509588
7,40
2” / 2”
Horizontal centrifugal pump, non self-priming, with high efficiency
electromotor
Supply voltage 3 x 220 - 240/380 - 415 V, 50 Hz, IP 55, from 3 kW with
PTC
Mechanical seal in basic version SiC / SiC, elastomers EPDM (AQQE).
Pump mounted on baseplate, with axial suction and radial discharge. Pipe
connection: R = Whitworth-thread Rp
Wetted parts stainless steel - pump shaft, Impellers/chambers (EN
1.4301/AISI 304)
Type key is: CM x-x A-R-I-E-AQQE F-A-A-N
For more information please check the
Grundfos Product Center on
http://www.product-selection.grundfos.com
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 42
2015/Pump station accessories
If you need complete pump station please, send your inquiry!
Pump station with
2x CM-I-15-4 pumps
Pump station with
2x CM-I-5-8 pumps
Part number
Product
Temperature
Connection
Pressure
00ID8953
FF4-8 Pressure switch—1 pole
-20°C - 70°C
3/8”
0.5—8 bar
FF 4-8
Pressure switch
Hidrofor tanks
Part number
Product
Size
Connection
Max. pressure
Temperature
96528341
Pressure tank
60 liter
1”
10 bar
90°C
97527968
Pressure tank
100 liter
1”
10 bar
90°C
97792897
Pressure tank
200 liter
1” 1/4”
10 bar
90°C
96528347
Pressure tank
300 liter
1” 1/4”
10 bar
90°C
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 43
2015/Grundfos diaphragm dosing pumps
Digital diaphragm dosing pump with variable-speed drive (stepper motor), dosing flow can be
adjusted by means of an adjustment knob from 0.1-100%, universal chemical resistance due to fullPTFE diaphragm, click-stop mounting plate allows installation in three different positions.
Setting range:
Accuracy of repeatability:
Medium temperature:
Supply voltage:
Max. suction lift (operating):
1:1000 (e.g. 0,006 l/h bis 6,0 l/h)
±5%
-10 to +45 °C
1 x 110 – 240 VAC, 50 – 60 Hz, IP65
1,5 m cable with EU (Schuko) plug
6m
Price includes complete installation kit composed by foot filter and injection valve (G1/2”), 2m
PVC suction tube, 6m PE delivery tube, 2m PVC deaeration tube (4/6mm).
Control variant
PR
P
B
Digital dosing: Internal stroke speed and frequency control
●
●
●
Mounting plate (basic / wall mounting)
●
●
●
Supply voltage: 100—240 V, 50—60 Hz
●
●
●
Enclosure class IP 65, Nema 4x
●
●
●
Control panel position: front—fitted
●
●
●
Capacity adjustment knob (0.1—100%)
●
●
●
100% key (deareation)
●
●
Operation mode switch (manual / pulse)
●
●
Manual speed control
●
●
Pulse control (1:n)
●
●
General
Control panel
Operation modes
●
Functions
Relay setting: alarm, warning, stroke signal, pump dosing
●
Inputs / outputs
Input for external stop
●
●
Input for pulse control (for external water meter)
●
●
Input for low-level signal
●
●
Input for empty tank signal
●
●
Output relay (2 relays)
●
Other types of diosing pumps are also avaliable!
For more information please check the Grundfos Product Center on the following link
http://www.product-selection.grundfos.com
Part number
Grundfos code
Products
Min. Q
(lit/h)
Max. Q
(lit/h)
Max. pressure
Material
head/sealing
DDE-B
97720924
Dosing pump
0,006
6
10 bar
PVC/EPDM
DDE-P
97720958
Dosing pump
0,006
6
10 bar
PVC/EPDM
DDE-PR-6-10
98147269
Dosing pump
0,006
6
10 bar
PVC/EPDM
DDE-PR-15-4
98147303
Dosing pump
-
15
4 bar
PVC/EPDM
DDE-EI
96609016
External impulse inlet for DDE-P, DDE-PR
DDE-EE
96609019
External error impulse inlet for DDE-P, DDE-PR
DDE-FV
98070966
Foot valve with 2 level switch for DDE-P, DDE-PR
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 44
2015/Grundfos Chemical tanks, Stirrers, Drip pans
PE chemical tank
Part
number
Products
Size
96688081
PE chemical tank, transparent, with scale
40 liter
98148805
PE chemical tank, transparent, with scale
60 liter
98150038
Strengthened PE chemical tank, transparent, with scale
60 liter
98149057
PE chemical tank, transparent, with scale
100 liter
98150051
Strengthened PE chemical tank, transparent, with scale
100 liter
98149215
PE chemical tank, transparent, with scale
200 liter
98150053
Strengthened PE chemical tank, transparent, with scale
200 liter
98149245
PE chemical tank, transparent, with scale
300 liter
98150055
Strengthened PE chemical tank, transparent, with scale
300 liter
98149266
PE chemical tank, transparent, with scale
500 liter
98150057
Strengthened PE chemical tank, transparent, with scale
500 liter
96688086
PE chemical tank, transparent, with scale
1000 liter
96689191
Strengthened PE chemical tank, transparent, with scale
1000 liter
Strengthened means that the chemical tank is strengthened to ensure that the Stirrer can be installed on it.
Part number
Products
Phase
98165318
Stirrer for 60 liter tank
Three-phase current, 0.09 kW
98164575
Stirrer for 60 liter tank
Single-phase, 0.09 kW
98165382
Stirrer for 100 liter tank
Three-phase current, 0.09 kW
98164609
Stirrer for 100 liter tank
Single-phase, 0.09 kW
98165391
Stirrer for 200 liter tank
Three-phase current, 0.25 kW
95740746
Stirrer for 300 liter tank
Three-phase current, 0.25 kW
98165437
Stirrer for 500 liter tank
Three-phase current, 0.25 kW
98165451
Stirrer for 1000 liter tank
Three-phase current, 0.25 kW
Stirrer
PE Drip pan
Part number
Products
Nominal capacity
96726831
PE Drip pan
60 liter
96726832
PE Drip pan
100 liter
98150059
PE Drip pan
200 liter
96726834
PE Drip pan
300 liter
95701272
PE Drip pan
500 liter
96726836
PE Drip pan
1000 liter
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 45
2015/Grundfos pH Measurement & Control System
Product No.:
Type key:
Type:
95706139
DIA-1-A, P/R-X-X-PTB-X-X, W-G
314-170-10072
Preassembled system for pH measurement and control
The Conex® DIA-1-A is a preassembled system with reliable sensors and Conex® DIA-1 controller, mounted on
plate ready forquick installation. The system is ideal for many disinfection applications. The easy-to-navigate
user interface speaks nine languages.The unitmonitors itself and carries out a plausibility check during
calibration. Additional features: automatic self-adaption to input signals, manual or automatic temperature
compensation, logbook function.
The DIA-1 controller is able to monitor / control one of these parameters:
-Chlorine, 0 – 50 mg/l, in 7 measuring ranges, or free adjustable
-Chlorine dioxide, 0 – 50 mg/l, in 7 measuring ranges, or free adjustable
-Ozone, 0 – 5 mg/l, in 4 measuring ranges, or free adjustable
-Hydrogen peroxide, 0 – 2000 mg/l, in 4 measuring ranges, or free adjustable
-Peracetic acid, 0 – 2000 mg/l, in 4 measuring ranges, or free adjustable
-pH, 0 – 14 pH, in 3 measuring ranges, or free adjustable
-Redox (ORP), -1500 to +1500 mV, in 2 measuring ranges, or free adjustable.
Specification
Value
Measuring cell
Maximum operating pressure
P/R—pH or redox (ORP) only
6 bar
Electrode
pH range
pH, PTFE diaphragm, buffer solution
1—12
Electrical data
Power input
230/240V ~ 50 Hz
15 VA
Protection level
Installation type
IP65
Wall mounting
Buffer pH
Cable pH
Plug
3 x 100 ml
1.00 m, plug
N-plug
For more information please check
the Grundfos Product Center on
http://www.product-selection.grundfos.com
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 46
2015/Grundfos Redox Measurement & Control System
Product No.:
Type key:
Type:
95710020
DIA-1-A, P/R-X-X-RTX-X-X, W-G
314-170-10020
Preassembled system for Redox measurement and control
The Conex® DIA-1-A is a preassembled system with reliable sensors and Conex® DIA-1 controller, mounted on
plate ready forquick installation. The system is ideal for many disinfection applications. The easy-to-navigate
user interface speaks nine languages.The unitmonitors itself and carries out a plausibility check during
calibration. Additional features: automatic self-adaption to input signals, manual or automatic temperature
compensation, logbook function.
The DIA-1 controller is able to monitor / control one of these parameters:
-Chlorine, 0 – 50 mg/l, in 7 measuring ranges, or free adjustable
-Chlorine dioxide, 0 – 50 mg/l, in 7 measuring ranges, or free adjustable
-Ozone, 0 – 5 mg/l, in 4 measuring ranges, or free adjustable
-Hydrogen peroxide, 0 – 2000 mg/l, in 4 measuring ranges, or free adjustable
-Peracetic acid, 0 – 2000 mg/l, in 4 measuring ranges, or free adjustable
-pH, 0 – 14 pH, in 3 measuring ranges, or free adjustable
-Redox (ORP), -1500 to +1500 mV, in 2 measuring ranges, or free adjustable.
Specification
Value
Measuring cell
Maximum operating pressure
P/R—pH or redox (ORP) only
6 bar
Electrode
Flow armature
pH, PTFE diaphragm, buffer solution
With flow armature (unpressurized)
Electrical data
Power input
230/240V ~ 50 Hz
15 VA
Protection level
Installation type
IP65
Wall mounting
Redox (ORP) electrode
Cable pH
Plug
+/- 1500 mV
1.00 m, plug
N-plug
For more information please check
the Grundfos Product Center on
http://www.product-selection.grundfos.com
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 47
2015/Grundfos Chlorine Measurement & Control System
Product No.:
Type key:
Type:
95737919
DIA-1-A, D2-P-AU-X-QS-T, W-G
314-931-10005
Preassembled system for Chlorine measurement and control
The Conex® DIA-1-A is a preassembled system with reliable sensors and Conex® DIA-1 controller, mounted on
plate ready forquick installation. The system is ideal for many disinfection applications. The easy-to-navigate
user interface speaks nine languages.The unitmonitors itself and carries out a plausibility check during
calibration. Additional features: automatic self-adaption to input signals, manual or automatic temperature
compensation, logbook function.
The DIA-1 controller is able to monitor / control one of these parameters:
-Chlorine, 0 – 50 mg/l, in 7 measuring ranges, or free adjustable
-Chlorine dioxide, 0 – 50 mg/l, in 7 measuring ranges, or free adjustable
-Ozone, 0 – 5 mg/l, in 4 measuring ranges, or free adjustable
-Hydrogen peroxide, 0 – 2000 mg/l, in 4 measuring ranges, or free adjustable
-Peracetic acid, 0 – 2000 mg/l, in 4 measuring ranges, or free adjustable
-pH, 0 – 14 pH, in 3 measuring ranges, or free adjustable
-Redox (ORP), -1500 to +1500 mV, in 2 measuring ranges, or free adjustable.
Specification
Value
Measuring cell
Maximum operating pressure
P/R—pH or redox (ORP) only
4 bar
Cell type
Disinfection electrode
D2—pressure-proof, hydro-mechanical cleaning
Disinfection Cl2, ClO2, O3 (AU—gold)
Electrical data
Power input
230/240V ~ 50 Hz
15 VA
Protection level
Installation type
IP65
Wall mounting
Temperature sensor
Discharge valve
With Pt 100
0.3 bar with DN8 connection
Water sensor
Plug
Integrated flow sensor (1.00 m cable)
4 pole elbow
For more information please check
the Grundfos Product Center on
http://www.product-selection.grundfos.com
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 48
2015/Dosing injectors, Prominent Dosing pumps
Chemical resistance of materials used in liquid ends
Chemical
Formula
PE
PVC
PP
PVDF
FPM
EPDM
Tygon
Pharmed
PTFE
Sodium Hypochlorite
NaOCl+NaCl
o
+
o
+
+
+
+
+
+
Sodium Hydroxide
NaOH
+
+
+
+ 60%/25°C
-
+
10%
30%
+
Hydrochloric Acid
HCl
+
+
+
+
+
o
+
o
+
Sulphuric Acid
H2SO4
80%
50%
85%
+
+
+
30%
30%
+
Hydrogen Peroxide
H2O2
+
40%
30%
+
30%
30%
30%
+
+
+ resistant
o conditionally resistant
- not resistant
Part no.
Products
Connection
Flow
rate
m3/h
INJ-34
Dosing injector, PVDF
3/4”
1-2
INJ-10
Dosing injector, PVDF
1”
5
INJ-20
Dosing injector, PVDF
2”
35-40
ProMinent CONCEPTPLUS series
 Stroke length adjustment knob










Part no.
PM-1000
PP
PM-1002
PP
PM-0312
PP
PM-1000
PVDF
PM-1002
PVDF
PM-0312
PVDF
Indicator (error—red / operational—green)
Multifunctional switch
- stroke frequency (25,50,75,100%)
- stop mode
- external mode (water meter)
Power cable
Products
External control cable
Level switch (optional)
Suction valve
Discharge valve
PTFE diaphragm, PVDF dosing head
Electrical connection: 230V, IP 65.
Complete installation kit (foot and injection
valve, PE suction and dosing tube, external
control cable)
Stroke
volume
cm3/stroke
Diaphragm dosing pump with PP
head, foot– and dosing valves, 5m
tube, 2m control cable
Diaphragm dosing pump with PP
head, foot– and dosing valves, 5m
tube, 2m control cable
Diaphragm dosing pump with PP
head, foot– and dosing valves, 5m
tube, 2m control cable
Diaphragm dosing pump with PVDF
head, foot– and dosing valves, 5m
tube, 2m control cable
Diaphragm dosing pump with PVDF
head, foot– and dosing valves, 5m
tube, 2m control cable
0,07
Diaphragm dosing pump with PVDF
head, foot– and dosing valves, 5m
tube, 2m control cable
0,79
0,08
0,19
0,24
0,79
1,00
0,07
0,08
0,19
0,24
1,00
Stroke
frequency
stroke/
min
Dosing
tube
mm
180
6x4
180
6x4
240
8x5
180
6x4
180
6x4
240
8x5
Pressure
bar
Dosing
quantity
l/h
10
0,74
5
0,8
10
2,1
5
2,6
3
12
1,5
14,4
10
0,74
5
0,8
10
2,1
5
2,6
3
11,4
1,5
14,4
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 49
2015/Prominent Dosing pumps
Prominent Beta® Features:

Simple adjustment of metering capacity via stroke rate and stroke
length

Adaptation to existing signal transducers by external control via
potential-free contacts with pulse step-up and step-down

Suitable for use with almost all liquid chemicals thanks to the
available material combinations:
PP, PVDF, clear acrylic, PTFE and stainless steel

Self-bleeding dosing head design without bypass in clear acrylic/
PVDF and PVDF e.g. for H2O2 and sodium-calcium hypochlorite

Virtually wear-free solenoid drive: Cost-effective and overloadproof

Economical operation with up to 50 % energy-savings, thanks to
higher pump efficiency

Everything in sight and under control: 3 LED display for operating,
warning and error messages
Part no.
BT4b-1000 PP
BT4b-1602 PP
BT4b-0413 PP
BT4b-1000 PVDF
BT4b-1602 PVDF
BT4b-0413 PVDF
Stroke
volume
cm3/stroke
Products
Diaphragm dosing pump with
PP head, foot– and dosing
valves, 5m tube, control cable
Diaphragm dosing pump with
PP head, foot– and dosing
valves, 5m tube, control cable
Diaphragm dosing pump with
PP head, foot– and dosing
valves, 5m tube, control cable
Diaphragm dosing pump with
PVDF head, foot– and dosing
valves, 5m tube, control cable
Diaphragm dosing pump with
PVDF head, foot– and dosing
valves, 5m tube, control cable
0,07
Diaphragm dosing pump with
PVDF head, foot– and dosing
valves, 5m tube, control cable
0,79
Solenoid diaphragm metering pump Beta® b
Stroke
frequency
stroke/min
Dosing
tube
mm
180
6x4
180
6x4
180
8x5
0,08
0,19
0,24
0,79
1,00
0,07
0,08
0,19
0,24
180
6x4
180
6x4
240
8x5
1,00
Pressure
bar
Dosing
quantity
l/h
10
0,74
5
0,82
16
2,20
8
2,50
4
12,30
2
14,20
10
0,74
5
0,82
16
2,20
8
2,50
4
12,30
2
14,20
Part
number
Products
Lead length
1001300
5-core universal cable, 5-pin round plug
2m
1001301
5-core universal cable, 5-pin round plug
5m
1001302
5-core universal cable, 5-pin round plug
10 m
Part
number
Products
oØ x iØ
Lead length
1004505
Suction and discharge PE hose
6 x 4 mm
10 m
1004506
Suction and discharge PE hose
8 x 5 mm
10 m
1004507
Suction and discharge PE hose
12 x 9 mm
10 m
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 50
2015/Prominent Chemical tank, Drip pan, Electrical stirrer
Part
number
Products
Size
D
mm
H
mm
791993
PE chemical tank, transparent, with scale
35 liter
350
485
791994
PE chemical tank, transparent, with scale
60 liter
410
590
1001490
PE chemical tank, transparent, with scale
100 liter
500
760
791995
PE chemical tank, transparent, with scale
140 liter
500
860
1023175
PE chemical tank, transparent, with scale
250 liter
650
1100
791997
PE chemical tank, transparent, with scale
500 liter
820
1190
1010909
PE chemical tank, transparent, with scale
1000 liter
1070
1260
Part number
Products
Tank size
D2
mm
D1
mm
H
mm
1010879
PE drip pan, colorless / transparent
for 35 liter
565
507
220
1010880
PE drip pan, colorless / transparent
for 60 liter
680
607
270
1010881
PE drip pan, colorless / transparent
for 100 liter
802
727
320
1010882
PE drip pan, colorless / transparent
for 140 liter
811
727
370
1010883
PE drip pan, colorless / transparent
for 250 liter
917
807
520
1010884
PE drip pan, colorless / transparent
for 500 liter
1155
1009
670
740719
PE drip pan, colorless / transparent
for 1000 liter
1280
1200
980
Part
number
Products
Tank size
A
mm
B
mm
ØD
mm
ØLK
mm
ØF
mm
818576
Stainless steel
electrical stirrer
for 60 liter
195
490
115
100
70
1001566
Stainless steel
electrical stirrer
for 100 liter
200
675
160
130
70
791502
Stainless steel
electrical stirrer
for 140 liter
200
780
160
130
70
791503
Stainless steel
electrical stirrer
for 250 liter
200
950
160
130
70
791504
Stainless steel
electrical stirrer
for 500 liter
200
950
160
130
70
791458
Stainless steel
electrical stirrer
for 1000 liter
230
1190
200
165
130
Wide-range motor providing 1400 rpm, insulation class F, insulated for use in hot climates,
stainless steel 1.4571 shaft, polypropylene (PP) turbine, for 1000 litres made of PVDF.
Fit a motor protection switch for all motors.
Not suitable for gaseous media!
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 51
2015/Water Meters
WM-100
WM-54
WM-34
Part
number
Products
Nominal
Flow rate
Max.
Flow rate
Conn.
Length
mm
Contact sign
WM-034
Water meter with contact sign
2.5 m3/h
5 m3/h
3/4”
228 mm
1 liter/ impulse
WM-010
Water meter with contact sign
3.5 m3/h
7 m3/h
1”
380 mm
1 liter/ impulse
WM-054
Water meter with contact sign
6 m3/h
12 m3/h
5/4”
380 mm
1 liter/ impulse
WM-064
Water meter with contact sign
10 m3/h
20 m3/h
6/4”
440 mm
10 liter/ impulse
WM-020
Water meter with contact sign
15 m3/h
30 m3/h
2”
560 mm
10 liter/ impulse
WM-080
Water meter with contact sign
40 m3/h
80 m3/h
DN80
225 mm
100 liter/ impulse
WM-100
Water meter with contact sign
60 m3/h
120 m3/h
DN100
250 mm
100 liter/ impulse
WM-125
Water meter with contact sign
100 m3/h
200 m3/h
DN125
250 mm
100 liter/ impulse
WM-150
Water meter with contact sign
150 m3/h
300 m3/h
DN150
300 mm
1000 liter/ impulse
Euro-Clear Ltd. 2015 Industrial Components Catalog
Page number: 52
2015/Cooling tower controllers
Part number
Products
Cooling tower instrument with graphit probe and LCD digital display.
CCT-3320-GS
Probe connection:
Outline dimension:
Slot dimension for installation:
1/2”
48x96x100mm
45 x 91mm
Hi-limited alarm setting
0-19.99 mS/cm
Magnetic valve with coil (recommended 3/4”)
See page 101.
Water meter with contact sign
See page 116.
Diaphragm dosing pump with PVC head, foot– and dosing valves, 5 m tube, control cable
See page 108.
PE chemical tank (not necessary)
See page 109.