http://www.techni-tool.com

1801 Morgan Street
Rockford, IL 61102

Phone:
 (815) 968-9661
Fax:
(815) 968-9731
www.gcelectronics.com












SDS Number: 148
Revision Date: 04/21/2015
Supersedes Date: 02/01/2013
SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET
SAFETY DATA SHEET
Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200
SECTION 1: Identification
SECTION
Identification
Product1:Name:
HEAT SINK COMPOUND
AOS Silicone Heat Sink Compound
icone Heat Sink Compound
AOS Product Code: 54013
SECTION
1. PRODUCT
AND COMPANY IDENTIFICATION
AOS
Product
Code: 54013
REACH
Emergency
Ready!
REACH
Ready!
Product
Type:
Silicone
Contact: Chemtrec
Manufacturer:
Phone:
Product
HEAT SINK COMPOUND
Emergency
Telephone Numbers: (800) 424-9300
AOSName:
Thermal Compounds
Part
Number(s):
10-8106
Emergency
Telephone Numbers: Health: (732) 389-5514 9-5 EST M-F
pounds
22 Meridian Road, Suite
6
10-8108
Health:
(732) 389-5514 9-5
EST M-F
Suite 6
Flammability:
(732) 389-5514 9-5 EST M-F
New Jersey
07724
Eatontown,
rsey 07724 (732)
389-5514Flammability: (732) 389-5514 9-5 EST M-F
10-8109
SECTION 2: Hazard Identification
SECTION
2:
Hazard
Identification
SECTION 2: HAZARD IDENTIFICATION
Skin Irritant (skin and eyes)
Skin Irritant (skin and eyes)
SECTION 3: Composition/information on ingredients
SECTION 3: COMPOSITION/INFORMATION
ON INGREDIENTS
ON 3: Composition/information
on ingredients
CAS Registry #
CAS Registry #
Zinc Oxide
1314-13-2
nc Oxide
1314-13-2
00840600
# 5037P
(Trade Secret)
840600 # 5037P
(Trade Secret)
•• Based
Based on
onthe
thedata
dataavailable
available,
is notisconsidered
a hazard
under
OSHA
to this
AOS,product
this product
not considered
a hazard
under
OSHAHazard
Hazard
lable to AOS,
this product isStandard
not
considered
a hazard under OSHA Hazard
Communication
29 29
CFR1910.1200.
Communication
Standard
CFR1910.1200.
ard 29 CFR1910.1200.
is in
form
and and
will will
not pose
a dustahazard.
•• The
The Zinc
ZincOxide
Oxideininthis
thisproduct
product
is paste
in paste
form
not pose
dust hazard.
product is in paste form and will not pose a dust hazard.
Part Number(s): 10-8106, 10-8106-5LB, 10-8108, 10-8109
AOS Thermal Compounds
Page 1 of 5
http://www.techni-tool.com
http://www.techni-tool.com
1801 Morgan Street
Rockford, IL 61102
Phone: (815) 968-9661
Fax:
(815) 968-9731
www.gcelectronics.com
SDS Number: 148
Revision Date: 04/21/2015
Supersedes Date: 02/01/2013
































SAFETY DATA SHEET
 MATERIAL










Complies with OSHA Hazard Communication Standard 29 CFR
1910.1200









SECTION
4:
First
Aid
Measures



 4: First Aid Measures
SECTION

 4:COMPOUND
Name: HEAT
SINK
SECTION
First Aid Measures
•Product
Route of Exposure
SECTION
4:
First Aid Measures
of
Exposure
• Route
• Inhalation: N/A
SECTION
4:
First Aid Measures
of4:
Exposure
•SECTION
Inhalation:
N/A
•Route
Skin:
Wash
withAID
soapMEASURES
and water
FIRST
of
Exposure
• •Route
Inhalation:
Skin:
WashN/A
with
soap
and
water
Eye
Contact:
Flush
eyes
with
water
• •Route
of Exposure
Inhalation:
N/A
Skin:
WashConsult
with
soap
and
water
Eye
Contact:
Flush
with
water
• Ingestion:
aeyes
physician;
do not induce vomiting
Inhalation:
N/A
Skin:
WashConsult
with
soap
and
water
Eye
Contact:
Flush
with
water
•• Ingestion:
aeyes
physician;
do not induce vomiting
• Eye
Skin:Contact:
Wash with
soap
and
water
Flush
with
water
• Ingestion:
Consult
aeyes
physician;
do not induce vomiting
• Ingestion:
Eye Contact:
Flushaeyes
with water
Consult
physician;
do not
vomiting
SECTION 5:
Fireinduce
Fighting
Measures
• Ingestion: Consult SECTION
a physician; 5:
do not
induce
vomiting
Fire Fighting
Measures
5: Dioxide,
Fire Fighting
Measures
• Extinguishing Media: SECTION
Foam, Carbon
Dry Chemical
5: Dioxide,
Fire Fighting
Measures
Extinguishing
Media: SECTION
Foam,
Carbon
Dry
Chemical
•SECTION
Fire
Fighting
Instructions:
Wear
self-contained
breathing
apparatus for enclosed or confined areas
5: FIRE FIGHTING
MEASURES
SECTION
5:
Fire
Fighting
Measures
Extinguishing
Media:
Foam,
Carbon
Dioxide,
Dry
Chemical
• Unusual
Fire
Fighting
Instructions:
Wear
self-contained
breathing
apparatus for enclosed or confined areas
Fire & Explosion Hazards: None known
Extinguishing
Media:
Foam,
Carbon
Dioxide,
Dry
Chemical
Fire
Fighting
Instructions:
Wear
self-contained
breathing
apparatus for enclosed or confined areas
•• Unusual
Fire &
Explosion
Hazards:
None
known
• Fire
Extinguishing
Media: Foam,
Carbon
Dioxide, Dry
Chemical
Fighting
Instructions:
Wear
self-contained
breathing
apparatus for enclosed or confined areas
• Unusual Fire & Explosion Hazards: None known
• Fire
Fighting
Instructions:
Wear self-contained
breathing apparatus for enclosed or confined areas
Unusual
Fire &
Explosion
Hazards:
None
known
SECTION 6: Accidental Release Measures
• Unusual Fire & Explosion
Hazards:
None knownRelease Measures
SECTION
6: Accidental
SECTION
6: Accidental
Release Measures
- Do not ingest,
protective equipment
– wear gloves
• Personal precautions
Accidental
Release Measures
6:
ACCIDENTAL
MEASURES
precautions
- Do notRELEASE
ingest,
protective
equipment
– wear gloves
Personalproduct
•SECTION
Collect
andSECTION
repackage
in6:a container.
SECTION
6:a container.
Accidental
Release Measures
Personalproduct
precautions
Do
not
ingest,
protective
equipment
• Dispose
Collect
and
repackage
in
product in landfill as environmental precaution – wear gloves
precautions
- Do not
ingest,
protective
equipment
wear gloves
Personal
Collect
product
and
repackage
in acommon
container.
•• For
Dispose
product
in
as environmental
precaution
containment
andlandfill
clean
up
use
solvents
such as–mineral
spirits or acetone followed by
precautions
- Do not ingest,
protective equipment – wear gloves
• Collect
Personalproduct
and
repackage
in
a
container.
Dispose
as environmental
precaution
• soap
For
containment
andlandfill
clean up
use common solvents
such as mineral spirits or acetone followed by
andproduct
water in
Collect
repackage
in a container.precaution
•• soap
Dispose
product
in
as environmental
andproduct
water and
For containment
andlandfill
clean up
use common solvents
such as mineral spirits or acetone followed by
Dispose
product
in
landfill
as
environmental
precaution
• For
containment
and
clean
up
use
common solvents
such as mineral spirits or acetone followed by
soap and water
• soap
For containment
up use common
solventsand
suchStorage
as mineral spirits or acetone followed by
and water and clean
SECTION
7: Handling
soap and water
SECTION 7: Handling and Storage
SECTION
7: HANDLING
AND STORAGE
SECTION
7: Handling and Storage
Ambient
• Storage temperature:
SECTION
7: Handling and Storage
• Storage pressure:
temperature:
Ambient
Atmospheric
SECTION
7: Handling and Storage
temperature:
Ambient
• Storage pressure:
Atmospheric
• General: Keep container closed
temperature:
Ambient
Storagedirect
Storage
pressure:
Atmospheric
General:
Keep
container
closed
•• Avoid
flames
temperature:
Ambient
•• General:
Storage
pressure:
Atmospheric
Keep
container closed
Avoid direct
flames
Storage pressure:
Atmospheric
General:
Keep
container
closed
•• Avoid
direct
flames
• Avoid
General:
Keep
container
closed
direct SECTION
flames
8: Exposure Controls, Personal Protection
•SECTION
Avoid direct
flames
8: EXPOSURE
PERSONAL
PROTECTION
SECTION 8:CONTROLS,
Exposure Controls,
Personal
Protection
SECTION
8: Exposure
• Control Parameters
(Biological):
N/A Controls, Personal Protection
SECTION
8: Exposure
Control Parameters
(Biological):
N/A
• Appropriate
Engineering
controls:
GlovesControls, Personal Protection
SECTION
8:
Exposure
Control
Parameters
(Biological):
N/A
Appropriate
Engineering
controls:
GlovesControls, Personal Protection
• Respiratory
Protection:
Not
necessary
•• Ventilation:
Control
Parameters
(Biological):
N/A
Appropriate Protection:
Engineering
controls:
Gloves
Respiratory
Not
necessary
Under normal
conditions,
no special ventilation is needed
• Control
Parameters
(Biological):
N/A
Appropriate
Engineering
controls:
Gloves
Respiratory
Protection:
Not
necessary
• Skin
Ventilation:
Under
normal
conditions,
no special ventilation is needed
Protection: Gloves are not necessary
• Respiratory
Appropriate Protection:
EngineeringNot
controls:
Gloves
necessary
Ventilation:
Under
normal
conditions,
no special ventilation is needed
• Eye
Skin
Protection:
Gloves
are
not
necessary
Protection: Safety glasses are not necessary
• Ventilation:
Respiratory Protection:
Not conditions,
necessary no special ventilation is needed
Under
normal
Skin
Protection:Practices:
Glovesglasses
areSafety
notare
necessary
Protection:
Safety
not necessary
• Eye
Work/Hygienic
glasses
& gloves are recommended
Ventilation:
Under
normal
conditions,
no special ventilation is needed
Skin
Protection:
Gloves
areSafety
notare
necessary
Eye
Protection:
Safety
glasses
not necessary
•• Work/Hygienic
Practices:
glasses
& gloves are recommended
SkinProtection:
Protection: Safety
Glovesglasses
are notare
necessary
Eye
not necessary
•• Work/Hygienic
Practices:
Safety glasses
& gloves are recommended
Eye
Protection:
Safety
glasses
are
not necessary
•PartWork/Hygienic
Practices:
Safety
glasses
& gloves
are recommended
Number(s): 10-8106, 10-8106-5LB, 10-8108,
10-8109
• Work/Hygienic Practices: Safety glasses & gloves are recommended
Page 2 of 5
http://www.techni-tool.com
http://www.techni-tool.com
1801 Morgan Street
Rockford, IL 61102
Phone: (815) 968-9661
Fax:
(815) 968-9731
www.gcelectronics.com
SDS Number: 148
Revision Date: 04/21/2015
Supersedes Date: 02/01/2013
























 SAFETY DATA SHEET
MATERIAL


Complies with
OSHA

 Hazard Communication Standard 29 CFR 1910.1200
SECTION 9: Physical and Chemical Properties
SECTION 9: Physical
and Chemical
Properties


SECTION
Physical
and Chemical Properties
Product Name:
HEAT9:SINK
COMPOUND
SECTION
Appearance: Off
White Paste9: Physical and Chemical Properties
Specific Gravity: 2.4 (H2O=1)
Appearance: Odor:
Off White
Paste
Odorless
Specific Gravity:
2.4 (H2O=1)
SECTION
9: PHYSICAL
AND
CHEMICAL
PROPERTIES
N/A
Vapor Pressure:
Appearance:
Off
White
Paste
Odor:
OdorlessN/A
Specific
Gravity: 2.4
Threshold:
Odor
N/A(H2O=1)
Vapor Pressure:
Density:
Not relevant
Vapor
Odor:
Odorless
N/A
Odor Threshold: Appearance:
Pressure:
N/A
Vapor
pH: N/A Off White Paste
Density:
Not
relevant
VaporRelative
Specific
Gravity:
2.4 (H2O=1)
Density:
N/A
N/A
Odor Threshold:
pH: Point:Odor:
Odorless
Not
relevant N/A
Vapor Density:
-40°F/-40°C
Freezing
N/A
Relative
Vapor
Pressure:
Solubility in Water: Insoluble
pH:
N/A
Point:
-40°F/-40°C N/A
Freezing
OdorBoiling
Threshold:
N/A
RelativeinDensity:
Point
and
Initial Boiling
Water:
Insoluble
Solubility
Not relevant
Vapor
Density:
coefficient/
nPartition
Point:
-40°F/-40°C
Freezing
N/A
ial Boiling Point and Boiling Range: pH: N/A
in
Water:
Insoluble
Solubility
N/A N/A
nPartition coefficient/
Relative
Density:
N/A
octanol/water
ial Boiling Point and Boiling
Range:
-40°F/-40°C
Freezing
n- N/A
Partition coefficient/
N/A Point:
Point:
400°F/204°
(COC)
Flash
octanol/water
Solubility
in Water:
N/A
Temperature:
N/A Insoluble
Auto-ignition
Range:
400°F/204°
(COC)
Flash Point:
Initial Boiling
Point and
Boiling
<0.01
(butyl
Temperature:
N/A
Auto-ignition octanol/water
Partition coefficient/
nN/A
Point: 400°F/204°
(COC)
Flash
Rate:
Evaporation
N/A
Temperature:
Decomposition
<0.01
(butyl
Range:
Temperature:
N/A 260°C
Auto-ignition
acetate=1)
octanol/water
Evaporation Rate: <0.01 (butyl
Decomposition Temperature: 260°C
acetate=1)
400°F/204°
(COC)
Flash
Point:
cP
Evaporation Rate:
LFL: Not determined
N/A
Temperature:
Temperature:
260°C 432,000/50,000
DecompositionAuto-ignition
Viscosity:
acetate=1)
Flammability Limits:
432,000/50,000
cP@ 25°C
-1
LFL: Not
determined
<0.01
(butyl
sec
1/10
Not
determined
UFL:
Viscosity:
Flammability Limits:
Evaporation
-1
Decomposition Temperature:
260°C
432,000/50,000
cP
LFL: Rate:
Not
Not determined
determined
UFL:
acetate=1)
Viscosity: 1/10 sec-1 @ 25°C
Flammability
Limits: Limits:
Upper/lower
Flammability
N/A
@
25°C
1/10
sec
UFL: Not determined
432,000/50,000 cP
LFL: Not determined
r/lower FlammabilityFlammability
Limits: N/A
Viscosity:
Limits:
1/10 sec-1 @ 25°C
UFL: Not determined
r/lower Flammability Limits: N/A
Upper/lower Flammability Limits: N/A
SECTION 10: Stability and Reactivity
SECTION 10: Stability and Reactivity
SECTION 10: Stability and Reactivity
ProductAND
is stable;
hazardous polymerization will not occur.
• Reactivity:
SECTION
10:
STABILITY
REACTIVITY
SECTION
10: Stability
Reactivity
ProductStability:
is stable;Inert
hazardous
polymerization
will notand
occur.
• Reactivity:
• Chemical
••
••
••
••
••
•
Reactivity:Stability:
Product Inert
is stable; hazardous polymerization will not occur.
Chemical
• Possibility of
Hazardous Reactions: None known
Chemical• Stability:
InertProduct
is stable;
hazardous polymerization will not occur.
Possibility
ofReactivity:
Hazardous
Reactions:
None Strong
known
• Materials
& Conditions
to Avoid:
oxidizing agents
Possibility
Hazardous
Reactions:
Noneoxidizing
known agents
•&ofConditions
Chemical
Stability:
Inert
Materials
to
Avoid:
Strong
• Incompatible Materials: N/A
Materials•& Conditions
to
Avoid:
Strong
oxidizing
agents
Possibility
of
Hazardous
Reactions:
None
known
Incompatible
Materials:
N/A
• Hazardous
Decomposition
Products: None known
Incompatible
Materials:
N/A
• Decomposition
Materials & Conditions
to Avoid:
Strong oxidizing agents
Hazardous
Products: None
known
Hazardous
Products: None
• Decomposition
Incompatible Materials:
N/A known
• Hazardous Decomposition Products: None known
SECTION 11: Toxicological Information
SECTION 11: Toxicological Information
SECTION 11:
Toxicological Information
SECTION 11: TOXICOLOGICAL
INFORMATION
• Route of Exposure
SECTION
11: Toxicological Information
• Route of Exposure
• Inhalation: N/A
Route
of Exposure
• Inhalation:
N/A Consult a physician
• Ingestion:
Inhalation:
N/Aof Exposure
• Route
•• Ingestion:
Consult
physician
• Skin: Washa with
soap and water
Ingestion:
a physician
• Consult
Inhalation:
N/A
•• Skin:
Wash
with
soap
and
• Eye Contact: Flushwater
eyes with water
•• Eye
Skin:Contact:
Wash
soap
and
water
• with
Ingestion:
Consult
a physician
Flush
eyes
with
water
• Eye Contact:
Flush
eyes
with
water
Skin: Wash
with soap
water
Symptoms related• to physical,
chemical
andand
toxicological
characteristics: None known
related
to
physical,
chemical
and
toxicological
characteristics:
known
Symptoms
•
Eye
Contact:
Flush
eyes
with
waterfrom shortNone
Delayed and immediate effects and also chronic effects
and long
term exposure: None know
Symptoms
related
to physical,
chemical
and
toxicological
characteristics:
None
known
DelayedMeasures
and
immediate
effects
and
also
chronic
effects
from
short
and
long
term
exposure: None know
of toxicity: N/A
Delayed
immediate
effects and
also chronic
effects
short and long
term exposure:
know
Measuresand
of toxicity:
N/A
Symptoms
related
to physical,
chemical
andfrom
toxicological
characteristics:
NoneNone
known
Measures of toxicity:
N/A
Delayed and immediate effects and also chronic effects from short and long term exposure: None know
Measures of toxicity: N/A SECTION 12: Ecological Information
•
SECTION 12: Ecological Information
SECTION 12: Ecological Information
• Ecotoxicity: N/A
SECTION 12: Ecological Information
Ecotoxicity: N/A
•
• Persistence
and 10-8106-5LB,
degradability: N/A
Part
Number(s):
10-8106,
10-8108, 10-8109
Ecotoxicity:
N/A
•• Persistence
and
degradability:
N/A N/A
• Bioaccumulative
potential:
Persistence
degradability:
N/A
• and
Ecotoxicity:
N/A
•• Bioaccumulative
potential:
N/A
• Mobility in
soil: N/A
Bioaccumulative
potential:
•in soil:
Persistence
andN/A
degradability: N/A
•• Mobility
N/A
Page 3 of 5
http://www.techni-tool.com
•
•
•
•
Possibility of Hazardous Reactions: None known
Materials & Conditions to Avoid: Strong oxidizing agents
Incompatible Materials: N/A
Hazardous Decomposition Products: None known
http://www.techni-tool.com
SECTION 11: Toxicological Information
1801 Morgan Street
• Route of Exposure
Rockford, IL 61102
• Inhalation: N/A
Phone:
(815) Consult
968-9661
• Ingestion:
a physician
Fax:
(815)
968-9731
• Skin: Wash with soap and water
www.gcelectronics.com
• Eye Contact: Flush eyes with water
SDS Number: 148
Revision Date: 04/21/2015
Supersedes Date: 02/01/2013
MATERIAL
SAFETY
DATA
Symptoms related to physical, chemical and
toxicological characteristics:
None
known SHEET
Delayed and immediate Complies
effects and also
effects
from short
and long term exposure:
None
withchronic
OSHA
Hazard
Communication
Standard
29know
CFR 1910.1200
Measures of toxicity: N/A
Product Name: HEAT SINK COMPOUND
SECTION 12: Ecological Information
SECTION 12: ECOLOGICAL INFORMATION
•
•
•
•
Ecotoxicity: N/A
Persistence and degradability:
 N/A

Bioaccumulative potential: N/A


Mobility in soil: N/A SECTION 13: Disposal Information




















SECTION 13: Disposal Information
AOS Thermal
Compounds
materials
in 13:
accordance
with
local, state & federal regulations.
• Incinerate or dispose ofSECTION
Disposal
Information
Tel.
(732)389-5514
22
Meridian
Road,
Suite
6,
Eatontown, NJ 07724 Fax (732)389-6380
SECTION
13:
DISPOSAL
INFORMATION
• Incinerate or dispose of materials in accordance with local, state & federal regulations.

• Incinerate or dispose of materials
in accordance with local, state & federal regulations.

SECTION 14: Transport
Information
SECTION 14: Transport Information
N/A
• UN Number:
SECTION
14: Transport Information
SECTION
14: TRANSPORT
INFORMATION
• UN Proper
Shipping
Name:
Non-Hazardous
Heat Sink Compound
Number: N/A
N/A
•• Transport
UN
Number:
Class:
Non-Hazardous
UN ProperHazard
Shipping
Name:
Non-Hazardous Heat Sink Compound
UN
Proper
Shipping
Name:
Non-Hazardous
Heat Sink Compound
• Environmental
Hazards
(Marine
Pollutant): No
Transport Hazard Class: Non-Hazardous
Hazard
Class:
Non-Hazardous
• Transport
in
Bulk:
Yes
Environmental Hazards (Marine Pollutant): No
Environmental
Hazards
Pollutant): No
• Special
Transport
Precautions:
Transport
in Bulk:
Yes (MarineN/A
Transport
in
Bulk:
Yes
• Not
a
hazardous
material
for
DOT,
Special Transport Precautions: N/ATDG classification, ADR/RID, IMDG, and IATA-DGR
Special
Transportmaterial
Precautions:
N/ATDG classification, ADR/RID, IMDG, and IATA-DGR
•• shipping.
Not
a hazardous
for DOT,
• Not
a hazardous material for DOT, TDG classification, ADR/RID, IMDG, and IATA-DGR
shipping.
shipping.
SECTION 15: Regulatory Information
SECTION 15: REGULATORY
INFORMATION
SECTION
15: Regulatory Information
• All ingredients are onSECTION
the Toxic Substances
Control Act
(TSCA) Inventory list or are not required to
15: Regulatory
Information
be
listed.
If
you
export
this
product,
please
ensure
that
the
ingredients
meetlist
theor
inventory
listing to
Inventory
are not required
• All ingredients are on the Toxic Substances Control Act (TSCA)
requirement
of the
receiving
company.
ingredients
are
on the
Toxic
Substances
Controlthat
Actthe
(TSCA)
Inventory
are not required
• All
be
listed.
If you
export
this
product,
please ensure
ingredients
meetlist
theor
inventory
listing to
be
listed.
If
you
export
this
product,
please
ensure
that
the
ingredients
meet
the
inventory
listing
requirement of the receiving company.
requirement of the receiving company.
•
•
•
SECTION 16: Other Information
SECTION 16: Other Information
presented in16:
good
faith and
believed to be accurate as of the revision date
The information herein isSECTION
Other
Information
shown
above. However,
warranty,
implied,
is given.
It is theas
buyer’s
information
herein isno
presented
in expressed
good faithor
and
believed
to be accurate
of the responsibility
revision date
The
to
ensure
that
its
activities
comply
with
federal,
state
or
provincial,
and
local
laws.
information
herein
is
presented
in
good
faith
and
believed
to
be
accurate
as
of the responsibility
revision date
The
shown above. However, no warranty, expressed or implied, is given. It is the buyer’s
shown
above.
However,
warranty,
or implied,
is given.
is thelaws.
buyer’s responsibility
to
ensure
that its
activitiesnocomply
withexpressed
federal, state
or provincial,
andItlocal
• This
MSDS
updated
to conform
to standards
forth by the
Manufacturers
to ensure
thathas
itsbeen
activities
comply
with federal,
state orset
provincial,
andChemical
local laws.
Association
as
released
through
the
American
National
Standard
Institute.
(See
ANSI
Z400.1-1993)
• This MSDS has been updated to conform to standards set forth by the Chemical Manufacturers
• This
MSDS
has
been
updated
to
conform
to
standards
set
forth
by
the
Chemical
Manufacturers
Association as released through the American National Standard Institute. (See ANSI Z400.1-1993)
Part Number(s): 10-8106, 10-8106-5LB, 10-8108, 10-8109
Association as released through the American National Standard Institute. (See ANSI Z400.1-1993)
Page 4 of 5
http://www.techni-tool.com
http://www.techni-tool.com
1801 Morgan Street
Rockford, IL 61102
Phone: (815) 968-9661
Fax:
(815) 968-9731
www.gcelectronics.com
SDS Number: 148
Revision Date: 04/21/2015
Supersedes Date: 02/01/2013
MATERIAL SAFETY DATA SHEET
Complies with OSHA Hazard Communication Standard 29 CFR 1910.1200
Product Name: HEAT SINK COMPOUND
SECTION 16: OTHER INFORMATION
GC Electronics believes that the information contained herein is accurate and reliable as of the date of this
material safety data sheet, but no representation guarantee or warranty, express or implied, is made as to the
accuracy, reliability or completeness of the information. Persons receiving information are encouraged to make
their own determination as to the information’s suitability and completeness for their particular application.
NO INFORMATION CONTAINED HEREIN CONSTITUTES A PRODUCT WARRANTY OF ANY KIND, WHETHER
EXPRESS OR IMPLIED; AND ALL IMPLIED WARRANTIES OF MERCHANT ABILITY AND OF FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY GC ELECTRONICS.
Part Number(s): 10-8106, 10-8106-5LB, 10-8108, 10-8109
Page 5 of 5
http://www.techni-tool.com