PRODUCT SPECIFICATION
camera site
EU3512-3X Enclosure
OUTDOOR, SMALL
Product Features
• Complete Package Including Mount, Housing, and Sun Shroud
• Small, Contemporary Design
• Die-Cast and Extruded Aluminum Construction
• Forward-Opening Hinged Lid
• Rear Link-Lock Latch
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• Designed for Indoor/Outdoor Applications
• Easy Access for Servicing and Installation
The EU3512-3X is an outdoor camera enclosure constructed from die
cast and extruded aluminum. This enclosure is designed for small-tomedium cameras with fixed focal length lenses or motorized zoom
lenses (with or without auto iris operation).
.
5.1
(13.05)
14.7
(37.47)
3.8
(9.86)
The front hinged lid provides easy access to the removable camera
sled. Two adjustable liquid-tight glands on the bottom of the
enclosure allow for easy installation of the power and video cables.
The rear link-lock latch can be used with a padlock of suitable size
to secure the enclosure.
The EU3512-3X is equipped with a heater and defroster. The heater
is thermostatically controlled; it activates on at 50°F (10°C) and off
at 80°F (27°C). The defroster operates continuously. A sun shroud
and wall mount are included accessories.
C2428 / NEW 11-04
12.7
(32.38)
11.2
(28.57)
2.0
(5.08)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE IN INCHES.
U.S. Patent #307,915
International Organization
for Standardization;
Registered ISO 9001
TECHNICAL SPECIFICATIONS
MODELS
2.00
(5.08)
Ø .272 (.69), 3X
EU3512-3X
Small outdoor camera enclosure with heater
and defroster
3.28
(8.33)
MECHANICAL
Multiple holes on adjustable camera sled;
camera sled can be inverted for additional
camera elevation
Maximum Camera Size
Accepts camera and lens combinations*
(including BNC connector) up to
2.87" W x 3.00" H x 10.00” L
(7.28 x 762 x 25.40 cm)
Viewing Window
0.187-inch (4.76 mm) thick, Lexan®
Viewing Window Area
2.25" H x 2.63" W (5.71 x 6.68 cm)
Cable Entry
Two adjustable, sealable glands on bottom,
0.47-inch (1.19 cm) maximum cable diameter
Cable Entry Holes
0.875-inch (2.22 cm) diameter; will accept
0.5-inch (1.27 cm) conduit fitting when
compression gland is removed
Latch Link-lock
No. 3, stainless steel; can be secured with
padlock (not supplied)
*Assumes lens is fully extended.
1.64
(4.17)
Camera Mounting
1.40
(3.56)
2.80
(7.11)
11.08
(28.14)
2.75
(6.99)
1.50
(3.81)
Ø .281 (7.13),
3X
2.86
(7.26)
Ø .343 (.87),
1X
1.25
(3.18)
2.95
(7.49)
5.43
(13.79)
3.48
(8.84)
10.53
(26.75)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
ELECTRICAL
Input Voltage
Max. Power Consumption
230 VAC
13 W
GENERAL
Construction
Finish
Environment
Unit Weight
Shipping Weight
Extruded and die-cast aluminum
Gray polyester powder coat
Indoor/outdoor;
-10° to 120°F (-23° to 49°C)
6.85 lb (3.10 kg)
8 lb (3.62 kg)
OPTIONAL ACCESSORIES
BK3512
Blower kit, continuous duty, 230 VAC, 9 W,
8 cfm at 50 Hz
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108
International Tel: (559) 292-1981 • FAX (559) 348-1120 • DataFAX (559) 292-0435
www.pelco.com
Lexan is a registered trademark of General Electric Company.
Specifications subject to change without notice.
©Copyright 2004, Pelco. All rights reserved.