TEMPERA
VALVE
USA
ISO 9001: 2000
QUALITY CERTIFIED
1062
1066
AUTOMATIC PRESSURE COMPENSATING
• AUTOMATIC PRESSURE COMPENSATING, PREVENTING
THERMAL SHOCK
• CAN BE USED WITH SINGLE OR TWO HANDLE MIXING
VALVE ASSEMBLIES.
• HOLDS A SELECTED WATER TEMPERATURE TO WITHIN
+ 3º F DEGREE REGARDLESS OF PRESSURE CHANGE
-
• FULLY PORTED VALVE WITH MINIMAL PRESSURE
DROP
• SAFE AND POSITIVE BECAUSE IT IS A PRESSURE
VALVE, NOT A THERMOSTATIC MIXING
BALANCING
VALVE
• MEETS A.S.S.E. STANDARD 1066 INDIVIDUAL IN-LINE
PRESSURE BALANCING VALVES
ADVANTAGES:
May be installed at any convenient, accessible
point on the supply lines... in any position or
angle.
OPERATION:
Fully automatic - no manual controls,
regulating or adjustments are needed.
With only one moving part, the Tempera
Valve is designed to equalize the hot and
cold supply line pressures. The change in
water pressure will not effect the preset
temperature.
www.pppinc.net
Part Number TRB-2 Rough Brass
Part Number TCP-2 Polished Chrome
ONLY ONE
MOVING PART
May be installed in either exposed or concealed
locations (Access door is required). Chrome
plated models are available for exposed
installations.
INSTALLATION:
Install the pressure balancing unit before
the fixture and control valve.
Specify the Tempera Valve for use in homes,
schools, gymnasiums, hotels, photographic
darkrooms, barber shops...wherever a close
control over water temperature is required.
PRECISION PLUMBING PRODUCTS
www.pppinc.net
Airport Business Center • 6807 N.E. 79th Court Suite E
Portland, Oregon 97218 • (503) 256-4010
FAX: (503) 253-8165
SUCCESSFULLY COMPLETED
100,000 CYCLE TESTING.
Made in the U.S.A.
We do not export jobs.
U.S. PATENT NUMBER 4,926,897
CANADIAN PATENT NUMBER 2,011,457
Rev. 08/05
1066
TEMPERA
automatic pressure compensating
VALVE
1062
CONSTRUCTION DETAILS:
EXTERNAL: Red-Bronze cast body containing over 85% ingot
copper. ASTM # B584 Alloy# C84400.
Connection
1/2" FPT
INTERNAL; Stainless steel (# 303) is used in the piston and
sleeve.
MAINTENANCE; A minimum is required, other than occasional
flushing of foreign deposits. Of the Tempera Valve's four parts, only
the balancing piston moves. This simple, compact design minimizes wear and mechanical failures.
PENNSALT CHEMICALS CORP.
3"
O.A.H.
PICKER X-RAY
REPUBLIC CREOSOTE
Indianapolis, Ind.
REYNOLDS ALUMINUM
Troutdale, Oregon
2 1/4"
4 1/8"
Temp-de-Tech
INSTALLATION:
U.S. ARMY ENGINEERS
Portland, Oregon
UNION CARBIDE
WESTERN HOTELS
Seattle, Washington
•The Tempera Valve may be
mounted concealed or exposed
(access doors required) - a chrome
plated model is available for
exposed installations.
BENSON HOTEL
Portland, Oregon
Mixing
Valve
CHRYSLER CORP.
Indianapolis, Ind.
(Hot)
EASTMAN KODAK
New York, NY
Tub
Spout
CAUTION:
MODEL PLUMBING CODES
REQUIRE HOT WATER
NOT TO EXCEED 120°F.
1062
Shower
Head
•May be installed on 1/2" water
supply line at any angle or position.
It is not necessary that the Tempera
Valve be mounted level.
NOTE: Water Hammer Arrestors
are recommended as indicated
on the drawing to protect against
water hammer.
TEKTRONIX INC.
Beaverton, Oregon
Temperature Limit
Stop (Max 120°F.)
O.A.L.
FORD MOTOR CO.
Detroit, Michigan
Cold Water
Supply
Tempera
Valve
Hot Water
Supply
1066
PRECISION PLUMBING PRODUCTS.
www.pppinc.net
Airport Business Center • 6807 N.E. 79th Court Suite E
Portland, Oregon 97218 • (503) 256-4010
FAX: (503) 253-8165
DISTRIBUTED BY:
HOLIDAY INN MOTELS
HOTEL CORNHUSKER
Lincoln, Nebraska
MORTON TOWERS
Miami, Florida