October 2013
Trinity MeyerLD
STEEL POLE DESIGNS
MeyerLD STEEL POLE DESIGNS
Catalog #021815
Trinity MeyerLD STEEL POLES
Table of Contents
Why Use Steel?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Standard Steel Pole Classification - MeyerLD1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard Steel Pole Classification - MeyerLD2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Standard Steel Pole Classification - MeyerLD3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Standard Steel Pole Classification - MeyerLD4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Standard Steel Pole Classification - MeyerLD5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Standard Steel Pole Classification - MeyerLD6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Standard Steel Pole Classification - MeyerLD7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Standard Steel Pole Classification - MeyerLD8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Standard Steel Pole Classification - MeyerLD9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Standard Steel Pole Classification - MeyerLD10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Standard Steel Pole Classification - MeyerLD11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Standard Steel Pole Classification - MeyerLD12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Plate Thickness - MeyerLD1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Plate Thickness - MeyerLD2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Plate Thickness - MeyerLD3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Plate Thickness - MeyerLD4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Plate Thickness - MeyerLD5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Plate Thickness - MeyerLD6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Plate Thickness - MeyerLD7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Plate Thickness - MeyerLD8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Plate Thickness - MeyerLD9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Plate Thickness - MeyerLD10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Plate Thickness - MeyerLD11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Plate Thickness - MeyerLD12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Slip Joint Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Standard Davit Arms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LD Arm End Plate Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LD Bracket Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Standard Davit Arm Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Typical Arm Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Standard Bolt On Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Standard Fasteners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Standard Galvanized Ladders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Standard Step Bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Climbing Attachments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Grounding Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Terms and Conditions of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1
Catalog #021815
Trinity MeyerLD STEEL POLES
Why Use Steel?
Steel: The Better Choice
A Trinity Meyer Steel Structures “Light Duty” (LD) transmission pole is a better choice than a wood or concrete
pole in most cases. Typically used for voltages from 44kv to 230kv, an LD pole is up to 50% lighter than wood and
as much as 80% less weight than a concrete “equivalent”.
More Environmentally Responsible
Surprisingly, steel is the most environmentally responsible of the three materials. Many people think of wood
as being 100% recyclable. Wood is renewable, but not 100% recyclable. Wood poles require extensive chemical
preservatives to prolong their life. Many groups are concerned about those chemicals leaching into water
sources, agricultural and playground dirt, leading many governments to classify wood poles as a hazardous
waste which restrict the recycling and landfill choices a pole owner has when the time comes to retire the pole.
And, as the wood pole eventually decays, those chemicals are fully released and the carbon that was bound into
the pole’s wood is released back into the environment, giving wood a carbon footprint.
Stronger in All Ways
Stronger than wood, more flexible than concrete, stiffer than composite; steel is unmatched in its universal
applicability. Precisely engineered capacities, rather than approximated ones, give you performance you can rely on.
Fewer Poles: Lower Installed Costs; Lower Maintenance Costs: Fewer Headaches
Steel poles support longer spans. Longer spans require fewer poles, less labor, less hardware and less time which
result in lower installed costs.
Superior Aesthetics
The predictability and consistency of steel poles’ geometry and straightness provide an advantage in appearance
that wood poles cannot offer. The color of a weathering steel pole is very similar to the color of a wood pole,
subtly blending into forested backgrounds.
Ease of Handling and Maintenance
The pole handling equipment used to handle wood poles may be used to handle the lighter class-for-class
steel pole. Unlike steel poles, wood poles expand and contract over time, requiring periodic maintenance and
adjustments to their hardware.
Overall, and for many reasons, steel is simply the better choice.
2
Catalog #021815
Trinity MeyerLD STEEL POLES
General Notes
A. Material - ASTM A871 Modified (Self Weathering) or ASTM A572 modified (galvanized). Fy — 65 ksi (448 MPa) with a Charpy V-Notch Impact Value of 15 foot-pounds (20.3 joules) at - 20°F/- 29°C (Heat Lot Tested).
B.
Pole section properties and moment capacities are calculated in accordance with ASCE/SEI 48-11 and
RUS Bulletin 1724E-214.
1. LD Poles are regular dodecagon (12-Sided Polygon).
2. Pole diameters are measured across the flats.
C. Embedment depths are assumed to be 10% of total pole length +2 ft. (.6m). Actual embedment depths
should be based on existing soil conditions and backfill material.
Example: Pole Length = 80 ft. (24.4m): Assumed embedment depth =10 ft. (3m).
D.
Standard slip-jointed pole designs are single piece to total pole length (HT) of 50ft; 2-piece for HT =55ft to HT = 95ft; and 3-piece for HT=100ft to HT= 120ft. Standard flange joint pole designs are single piece for HT=50 ft; 2-piece for HT=55ft to HT= 100ft; and 3-piece for HT=105ft to HT= 120ft. For 55ft and 50ft pole lengths, the top sections are 35 ft, for HT= 70ft the top section is 50ft. All top sections within a pole class have the same top diameter, thickness and taper.
E. Bearing Plates are welded to the bottom of the poles and extend approximately ¾” (19.05 mm) past the outside of the tower wall. Bearing plate thicknesses are 3/16” (4.76 mm) for pole diameters = 30” (762 mm), 1/4” (6.35 mm) for pole diameters > 30” (762 mm) = 45” (1143 mm) and 5/16” (7.94 mm) for pole diameters > 45” (1143 mm). Poles with a galvanized finish have a sizable opening in the bearing plate to allow for ventilation during galvanizing. Poles with weathering finishes have bearing plates that are closed. A pole cap is included with each pole.
F.
Weld Penetration:
Circumference Weld = 100%
Long Seam Weld = 80%
Long Seam (Female Slip Joint +6”) = 100%
Sealer Plates & Bearing Plates = 3/16 in. (4.8mm) Fillet Weld
G. Pole Grounding is available upon request.
H. Below grade corrosion protection is recommended. Shop applied protective coating and/or
ground sleeves are available upon request.
I. Poles shall be marked with the Trinity Meyer Job number and the LD class and length in feet, e.g. LD2 – 100.
Additional marking is available upon request.
J. Resultant moments were calculated using loading specified in RUS Bulletin 1724E-214.
K. Any correlation of pre-engineered steel pole size to wood pole class is based on Class B construction.
Pre-engineered steel pole sizes shall be selected per section 4.5.4 of ASCE 48-11.
L. The ultimate capacities listed herein are based on the materials’ minimum yield strength. Thus, loads used to calculate pole moments should include appropriate overload factors.
3
Catalog #021815
Pl. Thk
.1875 in. (4.76mm) - 65ksi (448 MPa)
Pl. Thk
.1875 in. (4.76mm) - 65ksi (448 MPa)
0.132332 in/ft (11.03mm/m)
Top Diameter
= 8.69 in. (220.7mm)
TAPER
0.116104 in/ft (9.68mm/m)
Top Diameter
= 8.69 in. (220.7mm)
TAPER
Trinity MeyerLD STEEL POLES
STANDARD STEEL POLE CLASSIFICATION MeyerLD1
CLASS1; RUS S-02.9
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
13.34/339
93/126
959/435
45/13.72
13.92/354
106/144
1101/499
50/15.24
14.50/368
119/162
1248/566
55/16.76
14.59/371
132/179
1427/647
60/18.29
15.17/385
145/197
1580/717
65/19.81
15.74/400
158/215
1763/800
70/21.34
16.32/415
171/233
1929/875
75/22.86
16.90/429
184/250
2102/953
80/24.38
17.48/444
197/268
2280/1034
85/25.91
18.06/459
210/285
2463/1117
90/27.43
18.64/473
223/303
2653/1203
95/28.96
19.23/488
236/320
2848/1292
100/30.48
19.31/490
248/337
3106/1409
105/32.00
19.89/505
261/355
3310/1501
110/33.53
20.48/520
274/372
3520/1597
115/35.05
21.06/535
287/389
3734/1694
120/36.58
21.64/550
299/406
3955/1794
STANDARD STEEL POLE CLASSIFICATION MeyerLD2
H-1; RUS S-03.5
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
40/12.19
13.99/355
112/152
990/449
45/13.72
14.64/372
127/173
1139/517
50/15.24
15.31/389
143/194
1293/586
55/16.76
15.47/393
159/215
1485/674
60/18.29
16.14/410
174/236
1648/748
65/19.81
16.80/427
190/258
1843/836
70/21.34
17.46/443
205/279
2021/917
75/22.86
18.12/460
221/300
2205/1000
80/24.38
18.79/477
236/321
2396/1087
85/25.91
19.44/494
252/342
2595/1177
90/27.43
20.11/511
267/363
2800/1270
95/28.96
20.77/528
283/384
3012/1366
100/30.48
20.93/532
298/405
3299/1496
105/32.00
21.60/549
313/426
3520/1597
110/33.53
22.25/565
329/446
3748/1700
115/35.05
22.92/582
344/467
3980/1805
120/36.58
23.58/599
359/488
4222/1915
4
Estimated Pole
Weight (Black) (lbs./kg)
Catalog #021815
Pl. Thk
.1875 in. (4.76mm) - 65ksi (448 MPa)
Pl. Thk
.1875 in. (4.76mm) - 65ksi (448 MPa)
0.176764 in/ft (14.73mm/m)
Top Diameter
= 8.69 in. (220.7mm)
TAPER
0.152616 in/ft (12.72mm/m)
Top Diameter
= 8.69 in. (220.7mm)
TAPER
Trinity MeyerLD STEEL POLES
STANDARD STEEL POLE CLASSIFICATION MeyerLD3
H-2; RUS S-04.2
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
14.80/376
132/180
1027/466
45/13.72
15.56/395
151/205
1185/538
50/15.24
16.32/415
170/230
1351/613
55/16.76
16.59/421
188/255
1557/706
60/18.29
17.36/441
207/280
1732/786
65/19.81
18.12/460
225/305
1947/883
70/21.34
18.88/480
244/330
2139/970
75/22.86
19.65/499
262/355
2340/1061
80/24.38
20.41/518
280/380
2549/1156
85/25.91
21.17/538
299/405
2764/1254
90/27.43
21.94/557
317/430
2988/1355
95/28.96
22.70/577
335/455
3220/1461
100/30.48
22.96/583
354/480
3543/1607
105/32.00
23.72/602
372/504
3786/1717
110/33.53
24.49/622
390/529
4037/1831
115/35.05
25.25/641
408/554
4296/1949
120/36.58
26.01/661
426/579
4560/2068
STANDARD STEEL POLE CLASSIFICATION MeyerLD4
H-3; RUS S-04.9
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
15.76/400
155/211
1072/486
45/13.72
16.65/423
177/240
1242/563
50/15.24
17.53/445
199/270
1421/645
55/16.76
17.92/455
221/299
1642/745
60/18.29
18.81/478
242/329
1833/831
65/19.81
19.69/500
264/358
2072/940
70/21.34
20.57/522
286/387
2283/1036
75/22.86
21.45/545
307/417
2502/1135
80/24.38
22.34/567
329/446
2730/1238
85/25.91
23.22/590
350/475
2968/1346
90/27.43
24.11/612
372/504
3213/1457
95/28.96
24.99/635
393/534
3469/1574
100/30.48
25.37/644
415/563
3840/1742
105/32.00
26.26/667
436/592
4108/1863
110/33.53
27.14/689
458/621
4387/1990
115/35.05
28.03/712
479/651
4675/2121
120/36.58
28.91/734
501/680
4969/2254
5
Catalog #021815
Pl. Thk
.1875 in. (4.76mm) - 65ksi (448 MPa)
Pl. Thk
.21875 in. (5.56mm) - 65ksi (448 MPa)
0.216367 in/ft (18.03mm/m)
Top Diameter
= 9.66 in. (245.4mm)
TAPER
0.188645 in/ft (15.72mm/m)
Top Diameter
= 9.66 in. (245.4mm)
TAPER
Trinity MeyerLD STEEL POLES
STANDARD STEEL POLE CLASSIFICATION MeyerLD5
H-4; RUS S-05.7
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
17.20/437
180/245
1180/535
45/13.72
18.15/461
206/279
1364/619
50/15.24
19.09/485
231/313
1559/707
55/16.76
19.54/496
256/347
1809/821
60/18.29
20.48/520
281/382
2019/916
65/19.81
21.42/544
307/416
2278/1033
70/21.34
22.37/568
332/450
2507/1137
75/22.86
23.31/592
357/484
2745/1245
80/24.38
24.25/616
382/518
2994/1358
85/25.91
25.20/640
407/552
3252/1475
90/27.43
26.14/664
432/586
3520/1597
95/28.96
27.08/688
457/620
3797/1722
100/30.48
27.53/699
482/654
4211/1910
105/32.00
28.48/723
507/688
4503/2043
110/33.53
29.42/747
532/722
4819/2186
115/35.05
30.36/771
557/756
5131/2327
120/36.58
31.31/795
582/790
5453/2473
STANDARD STEEL POLE CLASSIFICATION MeyerLD6
H-5; RUS S-06.5
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
18.31/465
207/281
1231/558
45/13.72
19.40/493
236/321
1430/649
50/15.24
20.48/520
265/360
1640/744
55/16.76
21.07/535
294/399
1910/866
60/18.29
22.15/563
323/439
2136/969
65/19.81
23.23/590
353/478
2423/1099
70/21.34
24.31/617
382/517
2672/1212
75/22.86
25.39/645
410/557
2932/1330
80/24.38
26.48/673
439/596
3202/1452
85/25.91
27.56/700
468/635
3485/1581
90/27.43
28.64/727
497/674
3779/1714
95/28.96
29.72/755
526/714
4097/1858
100/30.48
30.30/770
555/753
4574/2075
105/32.00
31.38/797
584/792
4897/2221
110/33.53
32.46/824
613/831
5884/2669
115/35.05
33.55/852
642/871
6340/2876
120/36.58
34.63/880
671/910
6812/3090
6
Catalog #021815
Pl. Thk
.25 in. (6.35mm) - 65ksi (448 MPa)
Pl. Thk
.25 in. (6.35mm) - 65ksi (448 MPa)
0.194151 in/ft (16.18mm/m)
Top Diameter
= 9.85 in. (250.2mm)
TAPER
0.180628 in/ft (15.05mm/m)
Top Diameter
= 9.85 in. (250.2mm)
TAPER
Trinity MeyerLD STEEL POLES
STANDARD STEEL POLE CLASSIFICATION MeyerLD7
H-6; RUS S-07.4
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
17.08/434
236/321
1539/698
45/13.72
17.98/457
270/366
1781/808
50/15.24
18.88/480
303/411
2035/923
55/16.76
19.16/487
336/455
2352/1067
60/18.29
20.07/510
369/500
2623/1190
65/19.81
20.97/533
402/545
2964/1344
70/21.34
21.88/556
435/590
3260/1479
75/22.86
22.78/579
468/634
3568/1618
80/24.38
23.68/601
501/679
3888/1764
85/25.91
24.58/624
533/723
4221/1915
90/27.43
25.49/647
566/768
4566/2071
95/28.96
26.39/670
599/812
4924/2233
100/30.48
26.67/677
632/857
5445/2470
105/32.00
27.58/701
664/901
5819/2639
110/33.53
28.48/723
697/945
6207/2815
115/35.05
29.38/746
730/990
6620/3003
120/36.58
30.28/769
762/1034
7032/3190
STANDARD STEEL POLE CLASSIFICATION MeyerLD8
RUS S-08.0
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
17.62/448
255/346
1572/713
45/13.72
18.58/472
291/395
1822/826
50/15.24
19.56/497
327/443
2085/946
55/16.76
19.91/506
359/486
2415/1095
60/18.29
20.88/530
398/540
2698/1224
65/19.81
21.85/555
434/588
3056/1386
70/21.34
22.82/580
470/637
3365/1526
75/22.86
23.79/604
505/685
3686/1672
80/24.38
24.77/629
541/733
4022/1824
85/25.91
25.73/654
576/781
4370/1982
90/27.43
26.71/678
612/829
4732/2146
95/28.96
27.67/703
647/877
5107/2316
100/30.48
28.02/712
682/925
5670/2572
105/32.00
29.00/737
718/973
6077/2756
110/33.53
29.96/761
753/1021
6485/2942
115/35.05
30.94/786
789/1069
6906/3133
120/36.58
31.90/810
824/1117
7341/3330
7
Catalog #021815
Pl. Thk
.25 in. (6.35mm) - 65ksi (448 MPa)
Pl. Thk
.25 in. (6.35mm) - 65ksi (448 MPa)
0.229407 in/ft (19.12mm/m)
Top Diameter
= 10.34 in. (262.6mm)
TAPER
0.215401 in/ft (17.95mm/m)
Top Diameter
= 9.90 in. (251.5mm)
TAPER
Trinity MeyerLD STEEL POLES
STANDARD STEEL CLASSIFICATION MeyerLD9
RUS S-09.0
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
18.52/470
287/389
1629/739
45/13.72
19.59/498
327/444
1892/858
50/15.24
20.67/525
368/499
2171/985
55/16.76
21.12/536
408/553
2530/1148
60/18.29
22.21/564
448/608
2829/1283
65/19.81
23.28/591
488/662
3214/1458
70/21.34
24.36/619
528/717
3544/1608
75/22.86
25.43/646
568/771
3888/1764
80/24.38
26.51/673
608/825
4246/1926
85/25.91
27.59/701
649/879
4620/2096
90/27.43
28.67/728
688/934
5009/2272
95/28.96
29.74/755
728/988
5427/2462
100/30.48
30.19/767
768/1042
6051/2745
105/32.00
31.28/795
808/1096
6477/2938
110/33.53
32.35/822
848/1150
6918/3138
115/35.05
33.43/849
888/1204
7373/3344
120/36.58
34.50/876
928/1258
7843/3558
STANDARD STEEL CLASSIFICATION MeyerLD10
RUS S-10.0
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
19.51/496
319/433
1713/777
45/13.72
20.66/525
364/494
1992/904
50/15.24
21.81/554
409/554
2286/1037
55/16.76
22.33/567
453/615
2672/1212
60/18.29
23.48/596
498/675
2989/1356
65/19.81
24.62/625
543/736
3394/1539
70/21.34
25.77/655
587/797
3742/1697
75/22.86
26.92/684
632/857
4106/1862
80/24.38
28.07/713
677/917
4490/2037
85/25.91
29.21/742
721/978
4900/2223
90/27.43
30.36/771
766/1038
5312/2409
95/28.96
31.51/800
810/1098
5740/2604
100/30.48
32.03/814
854/1159
6418/2911
105/32.00
33.18/843
899/1219
6869/3116
110/33.53
34.33/872
943/1279
7336/3328
115/35.05
35.48/901
988/1339
7819/3547
120/36.58
36.62/930
1032/1399
8319/3773
8
Catalog #021815
Pl. Thk
.25 in. (6.35mm) - 65ksi (448 MPa)
Pl. Thk
.25 in. (6.35mm) - 65ksi (448 MPa)
0.237618 in/ft (19.80mm/m)
Top Diameter
= 11.93 in. (303.0mm)
TAPER
0.226993 in/ft (18.92mm/m)
Top Diameter
= 11.50 in. (292.1mm)
TAPER
Trinity MeyerLD STEEL POLES
STANDARD STEEL CLASSIFICATION MeyerLD11
RUS S-11.0
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
20.57/522
352/477
1843/836
45/13.72
21.70/551
401/543
2136/969
50/15.24
22.84/580
450/610
2444/1109
55/16.76
23.36/593
499/677
2860/1297
60/18.29
24.50/622
548/743
3191/1447
65/19.81
25.63/651
597/810
3612/1638
70/21.34
26.77/680
647/877
3974/1803
75/22.86
27.90/709
696/943
4351/1974
80/24.38
29.04/738
745/1010
4762/2160
85/25.91
30.17/766
794/1076
5172/2346
90/27.43
31.31/795
843/1143
5598/2539
95/28.96
32.44/824
892/1209
6040/2740
100/30.48
32.95/837
940/1275
6751/3062
105/32.00
34.09/866
989/1341
7215/3273
110/33.53
35.22/895
1038/1408
7695/3490
115/35.05
36.36/924
1087/1474
8191/3715
120/36.58
37.49/952
1136/1540
8702/3947
STANDARD STEEL CLASSIFICATION MeyerLD12
RUS S-12.0
Total Pole Length
(ft./m)
Base Dia. at Bearing Plate
(in./mm) F-F
Groundline Moment
(ft-kips/kN-m) F-F
Estimated Pole
Weight (Black) (lbs./kg)
40/12.19
21.43/544
384/520
1920/871
45/13.72
22.62/575
437/593
2225/1009
50/15.24
23.81/605
491/666
2546/1155
55/16.76
24.38/619
544/738
2987/1355
60/18.29
25.57/649
598/811
3332/1511
65/19.81
26.76/680
652/884
3771/1710
70/21.34
27.94/710
705/957
4150/1882
75/22.86
29.13/740
759/1029
4561/2069
80/24.38
30.32/770
813/1102
4973/2256
85/25.91
31.51/800
866/1174
5401/2450
90/27.43
32.70/831
920/1247
5846/2652
95/28.96
33.88/861
973/1319
6311/2863
100/30.48
34.44/875
1026/1392
7065/3205
105/32.00
35.63/905
1080/1464
7550/3425
110/33.53
36.82/935
1133/1536
8057/3655
115/35.05
38.01/965
1186/1609
8575/3890
120/36.58
39.20/996
1241/1682
10116/4589
9
Catalog #021815
Trinity MeyerLD STEEL POLES
PLATE THICKNESS MeyerLD1
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
MeyerLD-01-40
0.1875
4.763
MeyerLD-01-45
0.1875
4.763
MeyerLD-01-50
0.1875
4.763
MeyerLD-01-55
0.1875
0.1875
4.763
4.763
MeyerLD-01-60
0.1875
0.1875
4.763
4.763
MeyerLD-01-65
0.1875
0.1875
4.763
4.763
MeyerLD-01-70
0.1875
0.1875
4.763
4.763
MeyerLD-01-75
0.1875
0.1875
4.763
4.763
MeyerLD-01-80
0.1875
0.1875
4.763
4.763
MeyerLD-01-85
0.1875
0.1875
4.763
4.763
MeyerLD-01-90
0.1875
0.1875
4.763
4.763
Bottom
MeyerLD-01-95
0.1875
0.1875
4.763
4.763
MeyerLD-01-100
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-01-105
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-01-110
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-01-115
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-01-120
0.1875
0.1875
0.1875
4.763
4.763
4.763
PLATE THICKNESS MeyerLD2
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
Bottom
MeyerLD-02-40
0.1875
4.763
MeyerLD-02-45
0.1875
4.763
MeyerLD-02-50
0.1875
MeyerLD-02-55
0.1875
0.1875
4.763
4.763
MeyerLD-02-60
0.1875
0.1875
4.763
4.763
MeyerLD-02-65
0.1875
0.1875
4.763
4.763
MeyerLD-02-70
0.1875
0.1875
4.763
4.763
MeyerLD-02-75
0.1875
0.1875
4.763
4.763
MeyerLD-02-80
0.1875
0.1875
4.763
4.763
MeyerLD-02-85
0.1875
0.1875
4.763
4.763
MeyerLD-02-90
0.1875
0.1875
4.763
4.763
MeyerLD-02-95
0.1875
0.1875
4.763
4.763
MeyerLD-02-100
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-02-105
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-02-110
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-02-115
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-02-120
0.1875
0.1875
0.1875
4.763
4.763
4.763
4.763
10
Catalog #021815
Trinity MeyerLD STEEL POLES
PLATE THICKNESS MeyerLD3
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
MeyerLD-03-40
0.1875
4.763
MeyerLD-03-45
0.1875
4.763
MeyerLD-03-50
0.1875
4.763
MeyerLD-03-55
0.1875
0.1875
4.763
4.763
MeyerLD-03-60
0.1875
0.1875
4.763
4.763
MeyerLD-03-65
0.1875
0.1875
4.763
4.763
MeyerLD-03-70
0.1875
0.1875
4.763
4.763
MeyerLD-03-75
0.1875
0.1875
4.763
4.763
MeyerLD-03-80
0.1875
0.1875
4.763
4.763
MeyerLD-03-85
0.1875
0.1875
4.763
4.763
MeyerLD-03-90
0.1875
0.1875
4.763
4.763
Bottom
MeyerLD-03-95
0.1875
0.1875
4.763
4.763
MeyerLD-03-100
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-03-105
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-03-110
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-03-115
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-03-120
0.1875
0.1875
0.1875
4.763
4.763
4.763
PLATE THICKNESS MeyerLD4
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
Bottom
MeyerLD-04-40
0.1875
4.763
MeyerLD-04-45
0.1875
4.763
MeyerLD-04-50
0.1875
MeyerLD-04-55
0.1875
0.1875
4.763
4.763
MeyerLD-04-60
0.1875
0.1875
4.763
4.763
MeyerLD-04-65
0.1875
0.1875
4.763
4.763
MeyerLD-04-70
0.1875
0.1875
4.763
4.763
MeyerLD-04-75
0.1875
0.1875
4.763
4.763
MeyerLD-04-80
0.1875
0.1875
4.763
4.763
MeyerLD-04-85
0.1875
0.1875
4.763
4.763
MeyerLD-04-90
0.1875
0.1875
4.763
4.763
MeyerLD-04-95
0.1875
0.1875
4.763
4.763
MeyerLD-04-100
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-04-105
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-04-110
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-04-115
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-04-120
0.1875
0.1875
0.1875
4.763
4.763
4.763
4.763
11
Catalog #021815
Trinity MeyerLD STEEL POLES
PLATE THICKNESS MeyerLD5
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
MeyerLD-05-40
0.1875
4.763
MeyerLD-05-45
0.1875
4.763
MeyerLD-05-50
0.1875
4.763
MeyerLD-05-55
0.1875
0.1875
4.763
4.763
MeyerLD-05-60
0.1875
0.1875
4.763
4.763
MeyerLD-05-65
0.1875
0.1875
4.763
4.763
MeyerLD-05-70
0.1875
0.1875
4.763
4.763
MeyerLD-05-75
0.1875
0.1875
4.763
4.763
MeyerLD-05-80
0.1875
0.1875
4.763
4.763
MeyerLD-05-85
0.1875
0.1875
4.763
4.763
MeyerLD-05-90
0.1875
0.1875
4.763
4.763
Bottom
MeyerLD-05-95
0.1875
0.1875
4.763
4.763
MeyerLD-05-100
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-05-105
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-05-110
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-05-115
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-05-120
0.1875
0.1875
0.1875
4.763
4.763
4.763
PLATE THICKNESS MeyerLD6
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
Bottom
MeyerLD-06-40
0.1875
4.763
MeyerLD-06-45
0.1875
4.763
MeyerLD-06-50
0.1875
MeyerLD-06-55
0.1875
0.1875
4.763
4.763
MeyerLD-06-60
0.1875
0.1875
4.763
4.763
MeyerLD-06-65
0.1875
0.1875
4.763
4.763
MeyerLD-06-70
0.1875
0.1875
4.763
4.763
MeyerLD-06-75
0.1875
0.1875
4.763
4.763
MeyerLD-06-80
0.1875
0.1875
4.763
4.763
MeyerLD-06-85
0.1875
0.1875
4.763
4.763
MeyerLD-06-90
0.1875
0.1875
4.763
4.763
MeyerLD-06-95
0.1875
0.1875
4.763
4.763
MeyerLD-06-100
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-06-105
0.1875
0.1875
0.1875
4.763
4.763
4.763
MeyerLD-06-110
0.1875
0.1875
0.250
4.763
4.763
6.350
MeyerLD-06-115
0.1875
0.1875
0.250
4.763
4.763
6.350
MeyerLD-06-120
0.1875
0.1875
0.250
4.763
4.763
6.350
4.763
12
Catalog #021815
Trinity MeyerLD STEEL POLES
PLATE THICKNESS MeyerLD7
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
MeyerLD-07-40
0.250
6.350
MeyerLD-07-45
0.250
6.350
MeyerLD-07-50
0.250
6.350
MeyerLD-07-55
0.250
0.250
6.350
6.350
MeyerLD-07-60
0.250
0.250
6.350
6.350
MeyerLD-07-65
0.250
0.250
6.350
6.350
MeyerLD-07-70
0.250
0.250
6.350
6.350
MeyerLD-07-75
0.250
0.250
6.350
6.350
MeyerLD-07-80
0.250
0.250
6.350
6.350
MeyerLD-07-85
0.250
0.250
6.350
6.350
MeyerLD-07-90
0.250
0.250
6.350
6.350
Bottom
MeyerLD-07-95
0.250
0.250
6.350
6.350
MeyerLD-07-100
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-07-105
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-07-110
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-07-115
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-07-120
0.250
0.250
0.250
6.350
6.350
6.350
PLATE THICKNESS MeyerLD8
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
Bottom
MeyerLD-08-40
0.250
6.350
MeyerLD-08-45
0.250
6.350
MeyerLD-08-50
0.250
MeyerLD-08-55
0.250
0.250
6.350
6.350
MeyerLD-08-60
0.250
0.250
6.350
6.350
MeyerLD-08-65
0.250
0.250
6.350
6.350
MeyerLD-08-70
0.250
0.250
6.350
6.350
MeyerLD-08-75
0.250
0.250
6.350
6.350
MeyerLD-08-80
0.250
0.250
6.350
6.350
MeyerLD-08-85
0.250
0.250
6.350
6.350
MeyerLD-08-90
0.250
0.250
6.350
6.350
MeyerLD-08-95
0.250
0.250
6.350
6.350
MeyerLD-08-100
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-08-105
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-08-110
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-08-115
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-08-120
0.250
0.250
0.250
6.350
6.350
6.350
6.350
13
Catalog #021815
Trinity MeyerLD STEEL POLES
PLATE THICKNESS MeyerLD9
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
MeyerLD-09-40
0.250
6.350
MeyerLD-09-45
0.250
6.350
MeyerLD-09-50
0.250
6.350
MeyerLD-09-55
0.250
0.250
6.350
6.350
MeyerLD-09-60
0.250
0.250
6.350
6.350
MeyerLD-09-65
0.250
0.250
6.350
6.350
MeyerLD-09-70
0.250
0.250
6.350
6.350
MeyerLD-09-75
0.250
0.250
6.350
6.350
MeyerLD-09-80
0.250
0.250
6.350
6.350
MeyerLD-09-85
0.250
0.250
6.350
6.350
MeyerLD-09-90
0.250
0.250
6.350
6.350
Bottom
MeyerLD-09-95
0.250
0.250
6.350
6.350
MeyerLD-09-100
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-09-105
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-09-110
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-09-115
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-09-120
0.250
0.250
0.250
6.350
6.350
6.350
PLATE THICKNESS MeyerLD10
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
Bottom
MeyerLD-10-40
0.250
6.350
MeyerLD-10-45
0.250
6.350
MeyerLD-10-50
0.250
MeyerLD-10-55
0.250
0.250
6.350
6.350
MeyerLD-10-60
0.250
0.250
6.350
6.350
MeyerLD-10-65
0.250
0.250
6.350
6.350
MeyerLD-10-70
0.250
0.250
6.350
6.350
MeyerLD-10-75
0.250
0.250
6.350
6.350
MeyerLD-10-80
0.250
0.250
6.350
6.350
MeyerLD-10-85
0.250
0.250
6.350
6.350
MeyerLD-10-90
0.250
0.250
6.350
6.350
MeyerLD-10-95
0.250
0.250
6.350
6.350
MeyerLD-10-100
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-10-105
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-10-110
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-10-115
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-10-120
0.250
0.250
0.250
6.350
6.350
6.350
6.350
14
Catalog #021815
Trinity MeyerLD STEEL POLES
PLATE THICKNESS MeyerLD11
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
MeyerLD-11-40
0.250
6.350
MeyerLD-11-45
0.250
6.350
MeyerLD-11-50
0.250
6.350
MeyerLD-11-55
0.250
0.250
6.350
6.350
MeyerLD-11-60
0.250
0.250
6.350
6.350
MeyerLD-11-65
0.250
0.250
6.350
6.350
MeyerLD-11-70
0.250
0.250
6.350
6.350
MeyerLD-11-75
0.250
0.250
6.350
6.350
MeyerLD-11-80
0.250
0.250
6.350
6.350
MeyerLD-11-85
0.250
0.250
6.350
6.350
MeyerLD-11-90
0.250
0.250
6.350
6.350
Bottom
MeyerLD-11-95
0.250
0.250
6.350
6.350
MeyerLD-11-100
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-11-105
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-11-110
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-11-115
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-11-120
0.250
0.250
0.250
6.350
6.350
6.350
PLATE THICKNESS MeyerLD12
Section Thicknesses, inches
Middle
Section Thicknesses, mm
Pole Designation
Top
Bottom
Top
Middle
Bottom
MeyerLD-12-40
0.250
6.350
MeyerLD-12-45
0.250
6.350
MeyerLD-12-50
0.250
MeyerLD-12-55
0.250
0.250
6.350
6.350
MeyerLD-12-60
0.250
0.250
6.350
6.350
MeyerLD-12-65
0.250
0.250
6.350
6.350
MeyerLD-12-70
0.250
0.250
6.350
6.350
MeyerLD-12-75
0.250
0.250
6.350
6.350
MeyerLD-12-80
0.250
0.250
6.350
6.350
MeyerLD-12-85
0.250
0.250
6.350
6.350
MeyerLD-12-90
0.250
0.250
6.350
6.350
MeyerLD-12-95
0.250
0.250
6.350
6.350
MeyerLD-12-100
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-12-105
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-12-110
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-12-115
0.250
0.250
0.250
6.350
6.350
6.350
MeyerLD-12-120
0.250
0.250
0.3125
6.350
6.350
7.938
6.350
15
Catalog #021815
Trinity MeyerLD STEEL POLES
SLIP JOINT CONFIGURATION
3 PIECE
100 - 120’
2 PIECE
55 - 60’
50’ TOP SECTION
50’ TOP SECTION
2 PIECE
65 - 95’
AS REQUIRED
30 - 33.8’
35’ TOP SECTION
1 PIECE
UP TO 50’
16
Catalog #021815
Trinity MeyerLD STEEL POLES
STANDARD DAVIT ARMS
ARM RISE = 1”/ft (83.3mm/m)
of ARM LENGTH
STANDARD DAVIT ARMS - CURVED
AVAILABLE UPON REQUEST ONLY
ARM RISE = 1”/ft (83.3mm/m)
of ARM LENGTH
GENERAL NOTES
*Maximum loads shown in chart applied non-simultaneously.
1. Material - ASTM A871 modified (self-weathering) painted or ASTM A572 modified (galvanized) FY=65 ksi (448 MPa) with a Charpy V-Notch Impact Value of 15 foot-pounds (20.3 Joules) at -20ºF/-29ºC (Heat Lot Tested).
2.Welds:
Long Seam - 50% Pentr
Bracket to Shaft - .375”/9.5mm Fillet
End Plate to Shaft - .1875”/4.76mm Fillet
3. All bolts - A325 Type III - 92 ksi (634 MPa).
4. All slots - 1.125”/28.6mm x 1.5”/38.1mm.
5. Arm and vang ratings represent hardware capacities only. It is the customer’s responsibility to determine the capacity of pole to resist
applied loads.
6. Arms should not be used for permanent deadend or permanent unbalanced conditions.
7. Steel davit arms shall not be left unloaded.
8. Catalog no. and description.
L
S
A
Bracket - (A) or (C)
End PL - Susp (S) or Dead End (D)
W
40
Length Indicator
Finish - Weathering (W),
Painted (P), Galvanized (G)
Duty - Light (L), Medium (M), or Heavy (H)
17
For simultaneous load application:
ML = L x Arm Length
MV = V x Arm Length + (T x W) + Arm Weight x Arm Length
2
SR = ML + MV
Yield Strength
Check SR ≤ Actual Section Modulus
NOTATION:
ML = Longitudinal moment
MV = Vertical moment
L = Longitudinal load
V = Vertical load
T = Transverse load
W = Rise (see tabulation)
Arm Length units
SR = Required section modulus
Actual section modulus listed in tabulation
Catalog #021815
Trinity MeyerLD STEEL POLES
DAVIT ARM DETAILS
4" 102mm
2" 51mm
8 3/4" 222mm
2 1/4" 57mm
7 1/4" 184mm
1" 25mm HOLE
(GALV. ARMS ONLY
R1 1/2" 38mm
1 1/8" 29mm HOLE
END PLATE 'S' - SUSPENSION
10 1/2" 267mm
5 3/4" 146mm
8 3/4" 222mm
7 1/2" 191mm
1" 25mm HOLE
(GALV. ARMS ONLY)
(3)
1 1/8" 29mm
HOLES
R1 1/2" 38mm
TYP
END PLATE 'D' - DEADEND
18
Catalog #021815
Trinity MeyerLD STEEL POLES
LD BRACKET DETAILS
R5" 127mm
"B"
"A"
R5/8" 16mm
TYP
"D"
"K"
"F"
"A" PL
CL ARM
"E"
"G"
"L"
"L"
"E"
CL ARM
1 3/8" 35mm
1 3/8" 35mm
"D"
REF
"K"
"C"
2 5/8" 67mm
"G"
R1 1/2" 38mm
(2 PLCS)
"F"
1 1/2" 38mm
75°0'
"H""
"H""
"J"
"J"
(2) 1" HOLES
(GALVANIZED ARMS ONLY)
(2) 1" 25mm HOLES
(GALVANIZED ARMS ONLY)
BRACKET 'A'
STANDARD
PAINTED OR
GALVANIZED
WEATHERING
BRACKET 'C'
ALLOWS INDEPENDENT MOUNTING
OF TWO ARMS BACK TO BACK AT
ONE ELEVATION.
DUTY
“A” “B”
“C” LIGHT
MEDIUM
HEAVY
LIGHT MEDIUM
HEAVY
7/16”
7/16” 1/2” 1/2”
1/2”
1/2”
72.2”
103.5”
103.5”
-------- --------
---------
36.1” 51.7”
51.7”
-------- --------
-------- “D” “E” “F” “G” “H” “J” “K” “L”
6 3/4” 9 1/2” 9 1/2”
6 3/4”
9 1/2” 9 1/2”
10 1/2” 16” 16”
10 1/2” 16” 16” 4 3/8” 6 9/32” 6 11/32”
7 13/32” 7 29/32”
8 13/32”
8 3/4”
12 9/16” 12 11/16”
14 13/16” 15 13/16”
16 13/16” 5 3/4” 7 15/16” 7 7/16”
5 11/16”
7 15/16”
7 7/16” 2 1/8”
3 1/8”
4 1/8”
2 1/8”
3 1/8”
4 1/8”
BRK’T “A” BRK’T “C” BRK’T “A” BRK’T “C”
69067
69068
69069
---------- 69076
---------- 69077
---------- 69078 69073
69074
69075
---------- ----------
---------- 69082
69083
69084
6 7/16” 13 1/2” 8 9/16” 19” 8 11/16”
24” 4” 13 1/2”
5”
19” 6” 24” 19
Catalog #021815
Trinity MeyerLD STEEL POLES
STANDARD DAVIT ARMS
LIGHT DUTY ARMS
PLATE THICKNESS = .1875"/4.76mm - 65 KSI (448 MPa) SMALL END SQUARE = 3”/76.2mm, LARGE END SQUARE = 4"/101.6mm, SECTION MODULUS = 2.803in3/45.94cm3
CATALOG NO.
L_40
L_45
L_50
L_55
L_60
L_65
L_70
L_75
L_80
L_85
L_90
L_95
L_10
ARM LENGTH
4 ft/1.22m
4.5 ft/1.37m
5 ft/1.52m
5.5 ft/1.68m
6 ft/1.83m
6.5 ft/1.98m
7 ft/2.13m
7.5 ft/2.29m
8 ft/2.44m
8.5 ft/2.59m
9 ft/2.74m
9.5 ft/2.90m
10 ft/3.05m
ARM WEIGHT
68 Lbs/31 Kg
72 Lbs/33 Kg
76 Lbs/35 Kg
80 Lbs/37 Kg
84 Lbs/39 Kg
88 Lbs/40 Kg
92 Lbs/42 Kg
96 Lbs/44 Kg
99 Lbs/45 Kg
103 Lbs/47 Kg
107 Lbs/49 Kg
111 Lbs/51 Kg
115 Lbs/53 Kg
ARM RISE
4 in/102mm
4.5 in/114mm
5 in/127mm
5.5 in/140mm
6 in/152mm
6.5 in/165mm
7 in/178mm
7.5 in/191mm
8 in/203mm
8.5 in/216mm
9 in/229mm
9.5 in/241mm
10 in/254mm
*V Lbs/V Kg
3,745/1,698
3,323/1,507
2,986/1,354
2,710/1,229
2,480/1,125
2,285/1,036
2,118/961
1,974/895
1,847/838
1,736/787
1,636/742
1,548/702
1,468/666
*T Lbs/T Kg
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
2,500/1,134
* L Lbs/L Kg
1,250/567
1,111/504
1,000/454
909/412
833/378
769/349
714/324
667/303
625/283
588/267
556/252
526/239
500/227
MEDIUM DUTY ARMS
PLATE THICKNESS = .1875"/4.76mm - 65 KSI (448 MPa) SMALL END SQUARE = 3”/76.2mm, LARGE END SQUARE = 5"/127mm, SECTION MODULUS = 4.783in3/78.39cm3
CATALOG NO.
M_40
M_45
M_50
M_55
M_60
M_65
M_70
M_75
M_80
M_85
M_90
M_95
M_10
ARM LENGTH
4 ft/1.22m
4.5 ft/1.37m
5 ft/1.52m
5.5 ft/1.68m
6 ft/1.83m
6.5 ft/1.98m
7 ft/2.13m
7.5 ft/2.29m
8 ft/2.44m
8.5 ft/2.59m
9 ft/2.74m
9.5 ft/2.90m
10 ft/3.05m
ARM WEIGHT
88 Lbs/40 Kg
93 Lbs/42 Kg
97 Lbs/44 Kg
102 Lbs/46 Kg
106 Lbs/48 Kg
111 Lbs/50 Kg
115 Lbs/52 Kg
120 Lbs/54 Kg
124 Lbs/56 Kg
129 Lbs/59 Kg
133 Lbs/61 Kg
138 Lbs/63 Kg
142 Lbs/65 Kg
ARM RISE
4 in/102mm
4.5 in/114mm
5 in/127mm
5.5 in/140mm
6 in/152mm
6.5 in/165mm
7 in/178mm
7.5 in/191mm
8 in/203mm
8.5 in/216mm
9 in/229mm
9.5 in/241mm
10 in/254mm
*V Lbs/V Kg
6,421/2,913
5,702/2,586
5,126/2,325
4,655/2,112
4,262/1,932
3,930/1,783
3,646/1,654
3,399/1,542
3,183/1,444
2,992/1,357
2,823/1,281
2,672/1,212
2,535/1,150
*T Lbs/T Kg
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
* L Lbs/L Kg
1,250/567
1,111/504
1,000/454
909/412
833/378
769/349
714/324
667/303
625/283
588/267
556/252
526/239
500/227
HEAVY DUTY ARMS
PLATE THICKNESS = .1875"/4.76mm - 65 KSI (448 MPa) SMALL END SQUARE = 3.5”/88.9mm, LARGE END SQUARE = 6"/152mm, SECTION MODULUS = 7.267in3/119.11cm3
CATALOG NO.
H_40
H_45
H_50
H_55
H_60
H_65
H_70
H_75
H_80
H_85
H_90
H_95
H_10
ARM LENGTH
4 ft/1.22m
4.5 ft/1.37m
5 ft/1.52m
5.5 ft/1.68m
6 ft/1.83m
6.5 ft/1.98m
7 ft/2.13m
7.5 ft/2.29m
8 ft/2.44m
8.5 ft/2.59m
9 ft/2.74m
9.5 ft/2.90m
10 ft/3.05m
ARM WEIGHT
111 Lbs/50 Kg
116 Lbs/53 Kg
122 Lbs/55 Kg
127 Lbs/58 Kg
133 Lbs/60 Kg
138 Lbs/63 Kg
143 Lbs/65 Kg
149 Lbs/68 Kg
155 Lbs/70 Kg
160 Lbs/73 Kg
165 Lbs/75 Kg
172 Lbs/78 Kg
177 Lbs/81 Kg
ARM RISE
4 in/102mm
4.5 in/114mm
5 in/127mm
5.5 in/140mm
6 in/152mm
6.5 in/165mm
7 in/178mm
7.5 in/191mm
8 in/203mm
8.5 in/216mm
9 in/229mm
9.5 in/241mm
10 in/254mm
20
*V Lbs/V Kg
9,780/4,436
8,687/3,940
7,812/3,544
7,096/3,219
6,560/2,976
5,995/2,719
5,563/2,523
5,188/2,353
4,860/2,205
4,570/2,073
4,313/1,956
4,083/1,852
3,876/1,758
*T Lbs/T Kg
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
4,000/1,814
* L Lbs/L Kg
1,250/567
1,111/504
1,000/454
909/412
833/378
769/349
714/324
667/303
625/283
588/267
556/252
526/239
500/227
Catalog #021815
Trinity MeyerLD STEEL POLES
TYPICAL ARM ASSEMBLIES
CURVED RECTANGULAR
WASHER
FLATWASHER
1" [25mm] BOLT WITH NUT
BOLT LENGTH = POLE
+ 3" [76mm]
ROUNDED UP
ARM WITH MOUNTING
BRACKET "A"
1" [25mm] NUT
TYPE A
SINGLE ARM MOUNTING WITH STANDARD BRACKET
"A" SHOWN. FOR DOUBLE ARM MOUNTING,
THE CURVED WASHERS WOULD BE OMITTED.
1" [25mm] THREADED ROD WITH NUTS
ROD LENGTH = POLE
+ 10.5" [267mm]
ROUNDED UP
FLATWASHER
1" [25mm] NUT
CURVED RECTANGULAR
WASHER
CURVED RECTANGULAR
WASHER
TYPE C
ARMS MAY BE INDEPENDENTLY MOUNTED.
DOUBLE ARM MOUNTING WITH OPTIONAL
BRACKET "C" SHOWN.
21
Catalog #021815
Trinity MeyerLD STEEL POLES
1 3/8" 35mm - 69054
2" [51mm] - 69057
STANDARD BOLT ON HARDWARE
4 1/2" 114mm
3" 76mm
5" 127mm
1 1/2" 38mm
LOAD DIRECTION
R2 1/2" 64mm
3/4" [19mm] BOLT WITH NUT
TORQUE TO 100 FT. LBS. [136 n-m]
BOLT LENGTH = POLE + 2 1/2" [64mm]
ROUNDED UP
VANG ASSEMBLY
10 KIP [4,535 kg] - CATALOG NO. 69054
20 KIP [9,071 kg] - CATALOG NO. 69057
(2)
5 1/4" 133mm - 69054
7" [178mm] - 69057
CURVED SQUARE WASHER
8" 203mm - 69054
11" [279mm] - 69057
R5" 127mm
7/8 [22mm]
HOLES
3" 76mm - 69054
4" [102mm] - 69057
10 OR 20 KIP VANG
4 3/4" 121mm
2" 51mm
3" 76mm
5" 127
R5" 127mm
9" 229mm
12" 305mm
R1 3/4" 44mm
16" 406mm
1" [25mm] BOLT WITH NUT
TORQUE TO 150 FT. LBS. [203 n-m]
BOLT LENGTH = POLE +3" [76mm]
ROUNDED UP
1 1/2" 38mm HOLE
45°0'
LOAD DIRECTION
CURVED RECTANGULAR
WASHER
VANG ASSEMBLY 40 KIP [18,144 kg]
GUY OR X-BRACE VANG ASSEMBLY
CATALOG NO. 69060
40 KIP VANG
22
(2)
1 3/16" [30mm]HOLES
Catalog #021815
Trinity MeyerLD STEEL POLES
STANDARD FASTENERS
10 KIP/44kN & 20 KIP/89kN VANG ASSEMBLIES
3/4”/19mm Dia. Bolt with 1 Nut
40 KIP/178kN VANG ASSEMBLIES
1”/25mm Dia. Bolt with 1 Nut
POLE DIAMETER RANGE
BOLT LENGTH
BOLT MARK
(Point to Point Diameters)*
Weathering Galvanized
> 8.5”/216mm ≤ 10.5”/267mm
13 in/330mm
65313
69343
> 10.5”/267mm ≤ 12.5”/318mm 15 in/381mm
65315
69345
> 12.5”/318mm ≤ 14.5”/368mm 17 in/432mm
65317
69347
> 14.5”/368mm ≤ 16.5”/419mm 19 in/483mm
65319
69349
> 16.5”/419mm ≤ 18.5”/470mm 21 in/533mm
65321
69351
> 18.5”/470mm ≤ 20.5”/521mm 23 in/584mm
65323
69353
> 20.5”/521 mm ≤ 22.5”/572mm 25 in/635mm
65325
69355
> 22.5”/572mm ≤ 24.5”/622mm 27 in/686mm
65327
69357
> 24.5”/622mm ≤ 26.5”/673mm 29 in/737mm
65329
69359
POLE DIAMETER RANGE
BOLT LENGTH
BOLT MARK
(Point to Point Diameters)*
Weathering Galvanized
> 8”/203mm ≤ 10”/254mm
13 in/330mm
65413
78310
> 10”/254mm ≤ 12”/305mm
15 in/381mm
65415
78311
> 12”/305mm ≤ 14”/356mm
17 in/432mm
65417
78312
> 14”/356mm ≤ 16”/406mm
19 in/483mm
65419
78313
> 16”/406mm ≤ 18”/457mm
21 in/533mm
65421
78314
> 18”/457mm ≤ 20”/508mm
23 in/584mm
65423
78315
> 20”/508mm ≤ 22”/559mm
25 in/635mm
65425
78316
> 22”/559mm ≤ 24”/610mm
27 in/686mm
65427
78317
> 24”/610mm ≤ 26”/660mm
29 in/737mm
65429
78318
DAVIT ARMS WITH “A” BRACKET
1”/25mm Dia. Bolt with 1 Nut
DAVIT ARMS WITH “C” BRACKET
1”/25mm Dia. Rod with 2 Nuts
POLE DIAMETER RANGE
BOLT LENGTH
BOLT MARK
(Point to Point Diameters)*
Weathering Galvanized
> 6.5”/165mm ≤ 9.5”/241mm
13 in/330mm
65413
78310
> 9.5”/241mm ≤ 11.5”/292mm
15 in/381mm
65415
78311
> 11.5”/292mm ≤ 13.5”/343mm 17 in/432mm
65417
78312
> 13.5”/343mm ≤ 15”/381mm
19 in/483mm
65419
78313
> 15”/381mm ≤ 17”/432mm
21 in/533mm
65421
78314
> 17”/432mm ≤ 19”/483mm
23 in/584mm
65423
78315
> 19”/483mm ≤ 21”/533mm
25 in/635mm
65425
78316
> 21”/533mm ≤ 23”/584mm
27 in/686mm
65427
78317
> 23”/584mm ≤ 25”/635mm
29 in/737mm
65429
78318
POLE DIAMETER RANGE
BOLT LENGTH
BOLT MARK
(Point to Point Diameters)*
Weathering Galvanized
> 6.5”/165mm ≤ 9.5”/241mm
19 in/483mm
66419
78330
> 9.5”/241mm ≤ 11.5”/292mm
21 in/533mm
66421
78331
> 11.5”/292mm ≤ 13.5”/343mm 23 in/584mm
66423
78332
> 13.5”/343mm ≤ 15”/381mm
25 in/635mm
66425
78333
> 15”/381mm ≤ 17”/432mm
27 in/686mm
66427
78334
> 17”/432mm ≤ 19”/483mm
29 in/737mm
66429
78335
> 19”/483mm ≤ 20.5”/521mm
31 in/787mm
66431
78336
> 20.5”/521 mm ≤ 22.5”/572mm 33 in/838mm
66433
78337
> 22.5”/572mm ≤ 24.5”/622mm 35 in/889mm
66435
78338
Miscellaneous Hardware
Weathering Galvanized
70677
73441
72940
73442
74269
74115
N/A
74120
69064
N/A
69066
N/A
SHAFT CL
3/4”/19mm Dia. Nut
1”/25mm Dia. Nut
1”/25mm Dia. Flat Washer
1”/25mm Dia. Lock Washer
Curved Square Washer
Curved Rectangular Washer
1/2" [51mm] MIN.
1 1/2" [38mm] MAX.
R1 3/4"
44mm
6"
152mm
3 1/2" [89mm] MIN.
4 1/2" [114mm] MAX.
EQUAL
EQUAL
STANDARD THRU VANG
23
Catalog #021815
Trinity MeyerLD STEEL POLES
STANDARD LADDERS
7 7/8"
200mm
1 1/2"
38mm
1 1/2"
38mm
15"
381mm
TYP
15"
381mm
TYP
5"
127mm
3'-10 1/2"
1181mm
4'-6 1/2"
1384mm
3'-10 1/2"
1181mm
3/4" x 7 1/2" [19mm X 188mm]
BUTTON HEAD STEP BOLT
CATALOG NO. 69342 - WEATHERING
CATALOG NO. 50921 - GALVANIZED
7 7/8"
200mm
1 1/2"
38mm
1 1/2"
38mm
15"
381mm
TYP
15"
381mm
TYP
6"
152mm
3'-10 1/2"
1181mm
3'-10 1/2"
1181mm
3/4" x 6 11/16" [19mm X 170mm]
BUTTON HEAD STEP BOLT
CATALOG NO. 69344 - WEATHERING
CATALOG NO. 52540 - GALVANIZED
24
4'-6 1/2"
1384mm
Catalog #021815
Trinity MeyerLD STEEL POLES
STANDARD STEP BOLTS
6 3/4"
171mm
6 1/16"
154mm
WITH 4" KNURLED
11/16"
17mm
STANDARD STEP BOLT
CATALOG NO. 70860 - WEATHERING
CATALOG NO. 70859 - GALVANIZED
CATALOG NO. 70677 - WEATHERING
CATALOG NO. 74137 - GALVANIZED
7 1/2"
191mm
1 1/2"
38mm
6"
152mm
WITH 4" KNURLED
STANDARD STEP BOLT - 3/4" DIA
CATALOG NO. 79087 - WEATHERING
CATALOG NO. 79097 - GALVANIZED
25
Catalog #021815
Trinity MeyerLD STEEL POLES
CLIMBING ATTACHMENTS
2 1/16"
53mm
3/16"
5mm
29/32"
23mm
1 13/16"
46mm
STANDARD LADDER CLIP
(ALL FINISHES)
CATALOG NO. 76266
2"
51mm
1/4"
6mm
1 1/4"
32mm
1 1/2"
38mm
13/16"
21mm
HOLE
FOR 3/4" [19mm] STEP BOLT
(ALL FINISHES)
CATALOG NO. 78086
26
Catalog #021815
Trinity MeyerLD STEEL POLES
GROUNDING OPTIONS
1 1/2"
38mm
3/4"
19mm
7/8"
22mm
3 1/2"
89mm
(2)
1 3/4"
44mm
1/2" [13mm] - 13 UNC THREADS
TAPPED OVERSIZE
CATALOG NO. 78131
1/2" [13mm] - 13 UNC THREADS
TAPPED OVERSIZE
CATALOG NO. 73515
27
Catalog #021815
Trinity MeyerLD STEEL POLES
TERMS AND CONDITIONS OF SALE
TRINITY MEYER UTILITY STRUCTURES, LLC
Terms and Conditions of Sale
The following Terms and Conditions shall govern all transactions between Trinity Meyer Utility Structures, LLC (“TRINITY”) and any buyer or potential
buyer (the “Buyer”) placing orders for or otherwise purchasing products (the “Products”) from TRINITY. Notwithstanding any contrary language in
Buyer’s purchase order or any other document purporting to set forth any additional or different terms or conditions governing the purchase and
sale of the Products, these Terms and Conditions set forth the full and final expression of the contract of sale of Products by Trinity to the Buyer. No
modification of these Terms and Conditions, nor any additional or different term or condition stated in Buyer’s purchase order shall be binding on
TRINITY unless specifically approved in writing in a written agreement signed by an authorized representative of TRINITY. To the extent that the
submission of any bid or quotation, or the furnishing of any Products by TRINITY could be considered to operate as an acceptance of any prior terms or
conditions published by Buyer, such bid, quotation or furnishing of such Products is expressly made on the condition that Buyer assents to these Terms
and Conditions.
1) Delivery, Title, Risk of Loss
All sales are FOB Origin, freight prepaid and added unless otherwise specified by TRINITY. Title to and risk of loss in Products will pass to the Buyer at the
FOB point.
2) Payment Terms
Payment terms for partial and compete shipments are net 30 days from date of invoice. Products are invoiced upon delivery. Buyer agrees to pay a
finance charge of one and one-half percent per month (or at the highest rate allowed by law, whichever is less) on all past due balances.
3) Delivery Schedules/Delays
All delivery commitments by TRINITY are good faith estimates based upon current information available from our suppliers at the time the dates for
delivery are established. TRINITY shall not be liable for any failure to deliver, or delay in delivery to Buyer to the extent that such failure or delay results
from causes beyond TRINITY’s reasonable control including, without any limitation, any act of God, fire, flood, explosion, war, revolution, riot, act of
terrorism, boycott, embargo, accident, unavailability of energy or raw materials or the enactment or implementation of any law, regulation, order or
decree that is not in effect at the time the order is placed. In the event of any delay in performance due to any such cause, the date of delivery will be
extended by a period of time reasonably necessary to overcome the effect of such delay.
4)Taxes
The Buyer shall be fully responsible for the payment of all sales, use, excise, value added and similar taxes applicable to the sale and transportation
of the Products. In lieu of paying such taxes to TRINITY, Buyer may furnish TRINITY an exemption certificate or similar documentation acceptable to
appropriate taxing authorities.
5) Inspection and Acceptance
Buyer may inspect the Products during business hours at TRINITY’s facility on reasonable notice to TRINITY provided such inspection does not
unreasonably interfere with TRINITY’s operations. Unless otherwise agreed in writing, Buyer agrees to accept delivery of all or any portion of the
Products as they are completed and delivered to Purchaser.
6) Compliance with Laws
Buyer and TRINITY agree and covenant that they will each comply with all applicable laws and regulations of the United States and all other
jurisdictions regarding the marketing, sale, export and distribution of Products, including, but not limited to, the U.S. export control laws and the U.S.
Foreign Corrupt Practices Act. Buyer covenants that it has not paid, and that it will not pay, offer to pay, agree to pay, or authorize or cause to be paid,
directly or indirectly, any money or anything of value to any foreign official (as defined in the U.S. Foreign Corrupt Practices Act) to induce such official
to use their influence to obtain an improper business advantage in connection with the purchase, sale, installation or use of any Products.
7) Warranty
TRINITY warrants that Products are being sold to Buyer free and clear of any encumbrances arising through TRINITY. In addition, TRINITY warrants that
all Products will conform to mutually agreed specifications for the Products (“Specifications”) and will otherwise be free from defects in workmanship
for 18 months from the date of delivery, or 12 months from the date of installation, whichever is earlier. TRINITY agrees to repair or replace any Product
that is not in conformance with the foregoing warranties. Buyer’s sole remedy for any breach of this warranty shall be limited to repair or replacement
(at TRINITY’s option) of the warranted Product, provided that TRINITY’s obligations under such warranties shall be waived by Buyer if Buyer fails to (i)
provide TRINITY written notice of Buyer’s specific warranty claim and the Product(s) affected, and (ii) provide TRINITY with reasonable opportunity to
inspect the Product(s) that are the subject of Buyer’s warranty claim to confirm a warranted defect manifesting during the warranty period. Following
TRINITY’s inspection and confirmation of a warranted defect, TRINITY agrees to perform its warranty obligations within a reasonable period of time,
provided Buyer has satisfied its warranty claim obligations in this section during the Warranty Period. Any repair or replacement by Seller shall not
extend the Warranty Period.
Other than the warranty of title, the warranties herein do not apply under any circumstances to any type of corrosion irrespective of the cause, or
damages or defects due to normal wear and tear, misuse or mishandling or to any Equipment that: (i) is modified or repaired by a party other than
Seller without Seller’s specific prior approval; (ii) is modified or repaired in a manner that is not in accordance with Seller’s erection drawings or prudent
industry practice; (iii) is not installed and maintained in a manner consistent with prudent industry practice; (iv) is damaged by any vibration, oscillation
or resonance associated with movement of air currents around the Equipment; or (vi) has experienced loads in excess of maximum design loads. Seller
specifically disclaims any and all warranties, express or implied, in connection therewith and Purchaser shall have no recourse to Seller therefor. Further,
this warranty does not cover and the Purchaser assumes all responsibility and the consequences arising from the structural integrity of any existing
foundation, anchorage or other structures upon which the Equipment may be used or installed.
28
Catalog #021815
TERMS AND CONDITIONS OF SALE
THE WARRANTIES AND REMEDIES STATED HEREIN ARE TRINITY’S EXCLUSIVE WARRANTIES IN CONNECTION WITH THE PRODUCTS AND BUYER’S SOLE
REMEDIES IN CONNECTION WITH ANY BREACH THEREOF. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS AND IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE SPECIFICALLY DISCLAIMED.
TRINITY shall not be liable for any costs, losses, expenses or damages beyond the cost of repair or replacement. All costs associated with the removal
and reinstallation of the Product shall be borne by Buyer. The foregoing exclusions and limitations on remedies shall apply notwithstanding any failure of
essential purpose.
8) Patent Indemnity
TRINITY will defend any suit or proceeding brought against Buyer to the extent that such suit or proceeding is based on a claim that any Product purchased
by Buyer or any part thereof constitutes an infringement of any United States patent issued as of the date of TRINITY’s quotation or proposal. TRINITY shall
have no obligation of defense or indemnity to the extent that any alleged infringement is attributable to any design or other special requirement specified
by Buyer. In the event that a Product or part thereof is held to infringe a patent and the use thereof is enjoined, TRINITY shall, at its expense and option,
either (a) obtain for Buyer the right to continue using such Product or part, (b) replace the Product or part with a Product or part that is non-infringing,
(c) modify the Product or part so that it becomes non-infringing, or (d) accept the return of the Product and refund the purchase price, less applicable
depreciation. The foregoing states the entire liability of TRINITY for patent infringement by the Products.
9) Modifications; Cancellation
Any changes in the Specifications or delivery of an order or any cancellation of an order must be requested by a party with reasonable advance written
notice to the other party and instituted only on such terms as are mutually agreed in writing by Buyer and TRINITY.
10) Limitation of Liability
IN NO EVENT SHALL TRINITY BE LIABLE TO BUYER AND BUYER WAIVES ALL CLAIMS FOR ANY CONSEQUENTIAL, INCIDENTAL, PUNITIVE OR SPECIAL
DAMAGES, WHETHER BASED UPON NEGLIGENCE, BREACH OF WARRANTY, STRICT LIABILITY IN TORT OR ANY OTHER THEORY OF RECOVERY. TRINITY’S
LIABILITY IN CONNECTION WITH ANY ORDER SHALL NOT EXCEED THE INVOICED AMOUNT OF THE ORDER.
11) Back charges and Setoffs
Unless such charges are authorized by TRINITY in writing in advance, no allowances will be made to Buyer and Buyer shall not withhold any back charges,
setoffs, deductions or credits against amounts otherwise due TRINITY.
12) Use of Intellectual Property
The ownership of all copyrights and other intellectual property rights in all designs, drawings, technical reports and technical calculations developed or
provided by TRINITY will remain with TRINITY. TRINITY grants to Buyer a perpetual, royalty-free, world-wide non-exclusive license to use and reproduce any
designs, drawings, technical reports and technical calculations developed by TRINITY in connection with the Products. This license is limited to the right
to use and reproduce such designs, drawings, reports and calculations for Buyer’s own use in the erection, installation and maintenance of the specific
Product for which the applicable design, drawing, report or calculation was developed.
13)Insurance
TRINITY agrees to maintain the following insurance:
(i) Commercial General Liability in the amount of $2 million each occurrence and annual aggregate.
(ii) Workers’ Compensation in accordance with statutory requirements of the state where Trinity’s manufacturing facility is located and Employers’ Liability
in the amount of $1 million.
(iii) Automobile Liability Insurance in the amount of $ 2 million covering owned, non-owned and hired vehicles.
A certificate of insurance evidencing the above coverage will be furnished upon request.
14)Confidentiality
Buyer shall not disclose to any third party these terms and conditions, the Product price, or any data, information, or designs provided by TRINITY in
manufacturing and delivering the Products, which obligation shall survive Delivery of any Products. The obligations of this provision shall not apply to
any information, data, or design(s) which Buyer can show it possessed prior to disclosure thereof by TRINITY, was or has become generally publicly known
through no breach hereof by Buyer or its suppliers or contractors, or is subsequently provided to Buyer by another party having the right to possess and
disclose the information, data, or designs.
15)Miscellaneous
The validity, construction and interpretation of all orders and releases; the sale of the goods or materials by TRINITY to Buyer; the rights and duties of
the parties with respect to such sale; and any disputes arising out of the foregoing shall be governed by and construed under the laws of the State of
Tennessee, U.S.A. without regard to its conflicts of law rules and without regard to the United Nations Convention on Contracts for the International Sale
of Goods. Any dispute between TRINITY and Buyer shall be heard exclusively in the state or federal courts located in Shelby County, Tennessee. Buyer
specifically consents to the jurisdiction and venue of such courts. Any failure or delay on the part of either TRINITY or Buyer to exercise any right, power,
privilege or remedy herein shall not constitute a waiver thereof. These terms and conditions contain the entire agreement of the parties. If any provision or
portion of these terms shall be adjudged invalid or unenforceable for any reason by a court of competent jurisdiction or by operation of any applicable law,
that invalidity or unenforceability shall not affect the other provisions of these terms, all of which shall remain in full force and effect. Prior TRINITY consent
in writing, which may be withheld, is required for any assignment, in whole or in part, by operation of law or otherwise, of these terms or any agreement in
which these terms are incorporated. These terms may not be amended or supplemented without the prior written consent of all parties hereto.
29
877.282.MEYER
www.TrinityMeyer.com
ISO 9001: 2008
Catalog #021815