ASSEMBLY INSTRUCTIONS
Frankfort Floor Lamp
Item # ARN1001
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS
ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
1.
Thread bottom nipple of pole (E) into top threaded opening of tripod base (F).
2.
Remove socket ring (C) from socket (D), place lamp shade (not included) over
the threaded section of socket (D) and secure with socket ring (C).
DRY
3.
Insert light bulb into socket.
4.
Attach the bolt (B) to the center hole of shade, and secure with final (A).
5.
Remove plastic cover (H) from electrical plug (G).
6.
Plug lamp into wall outlet.