Revision Date: 11/06/2014
Specification Sheet
NANOMYTE® SP-10 (LMNO)
PHYSICAL CHARACTERISTICS
Chemical Name:
Formula:
Color:
Purity:
Average Particle Size (APS):
Grain Size:
Crystal Structure:
Crystal Density:
Tap Density:
Specific Surface Area:
Stable Temperature Range:
Lithium Manganese Nickel Oxide
LiMn 1.5Ni0.5O4
Black
> 98%
4 – 5 µm
300 – 500 nm
Cubic – Fd3m (227)
4.45 g/cm 3
1 – 1.5 g/cm 3
2 – 3 m 2/g
Up to 700 °C
ELECTRICAL CHARACTERISTICS
Nominal voltage vs. Li/Li +:
Minimum capacity:
Nominal capacity at 0.1C:
4.7V
115 mAh/g
≥ 130 mAh/g
OPERATING CONDITIONS
Recommended charge method:
Constant current – constant voltage
Recommended maximum charge voltage:
5.0V vs. Li/Li +
Recommended maximum charge current:
5C
Recommended cutoff voltage for discharge:
3.5V vs. Li/Li +
Recommended maximum discharge current:
5C
STORAGE & HANDLING
Conditions for Safe Storage
Keep container tightly closed in a dry and well-ventilated place.
Precautions for Safe Handling
Appropriate personal protective equipment should be used at all times. Provide good ventilation or extraction.
Avoid contact with eyes and skin. Wash hands thoroughly after handling.
Refer to MSDS for further information.
400 Apgar Drive – Unit E  Somerset, NJ 08873  USA  (732) 868-3141  [email protected]
2014 – NEI Corporation
www.neicorporation.com
Page 1 of 1