Black Cat
SnoShock
Shock Absorbing Snow Plow Blades
www.BlackCatBlades.com [email protected] Toll Free: 1.800.661.6666 Ph: 780.465.6666 Fax: 780.465.9595
TM
• Cushioned Mount Absorbs Shock & Impact
• Shock Absorber Eliminates Carbide Fracturing
Extend Carbide Blade Life
up to 2X or More!
• Extra Large Tungsten Carbide Inserts Extend Life
• Hardened Face Shield Eliminates Premature Wear
Black Cat SnoShock Plow Blades are just that, snow plow blades
with built in shock absorbers!
Replacing the normal mounting holes in the steel blade with
specially designed poly bushings allows the blade to move and
float under the weight of the plow. This cushioning effect absorbs
the shock and impact normally transmitted through the blade
and virtually eliminates carbide insert fracturing. The result is
dramatically longer blade life. An integrated “Shield” is designed
into the face of the blade to further protect the carbide inserts
and keep the steel “holder” blade from prematurely wearing. A
hardened steel clamping blade is used over the face of the
SnoShock to mount the assembly to the plow.
Black Cat SnoShock Plow Blades are currently available in 7/8” x 6”
profile and come standard with Black Cat “Tall Bullnose” inserts,
offering the user exceptional blade life. Other insert shapes and
sizes can be ordered. Configurations are available for plows with
5/8” or 3/4” holes on 12” or 8” hole spacing.
740.1213
.875” .625”
3”
6”
0.76”
Clamping
Blade
0.36”
1.5”
Tall Bullnose
Insert
Hardened Face Shield
SNOW PLOW
Caterpillar® and other identities and/or trademarks referred to in this publication are the registered marks of the entities noted herein. The use of any trademarks of others than Black Cat
Blades Ltd. are solely and exclusively for identification, informational, comparative, and descriptive purposes. Black Cat Blades Ltd. is not affiliated with any owner of such registered marks and
does not make, use, or sell any products manufactured by any such entity identified in this publication.