Technical data sheet
Cementit Record liquid
The Record Cementit Liquid is a clear, colorless, liquid
adhesive based on ethyl-cyanoacrylate. Adheres very fast on
a various range of materials.
Product advantages
Adheres instantly
Suitable for small gaps
Very liquid
Colorless
Complet curing after 24 h
Technical data
Softening point
Flash point
Stability for handling
Viscosity
Complete curing
Density
Temperature resistance after curing
Shear strength
+165°C
+87°C
2 - 60 seconds
ca. 70 - 120 mPas
24 hours
1.06 ± 0.05 g/cm³
- 30 °C to + 80 °C
< 17 N/mm²
All measurements were performed under normal conditions (23 °C and 50 % relative
humidity).
Substrate range
Paper, photo paper leather, ceramics, stone, concrete, metal,
PVC hard, carton.
Technical data sheet Cementit Record liquid
Processing
The surface to be bonded must be clean, dry and free of
grease
Due to the high speed glue the parts to be bonded must be
aligned before bonding
Before first use, screw cap firmly, so that the tube is opened
Apply the glue unilaterlly and thriftily
Put the pieces to be bonded immediatly together and press
for approximatly 90 seconds
Depending on the material, a handling strength is achieved
after 15 - 120 seconds
After 24h the glue is fully loadable
Colours
transparent
Packaging
Tube of 3 gr
Shelf life and storage conditions
Store cool and dry (10 - 25 °C)
Cooling to +5°C gives optimum storage stability
Further information on request
Work and environmental safety
Important information about work and environmental safety is
available on the material safety data sheet.
Freiburgstrasse 616
CH - 3172 Niederwangen
Tel. +41 31 980 48 48
Fax +41 31 980 48 49
[email protected]
www.merz-benteli.ch
As of: 15.06.2017
Our information is based on experiences in lab and practice. Their publication occurs,
however, without takeover of a liability for damages and losses which are to be put
down to these information, as there the practical application conditions are lying
outside of the enterprise's control. The user is not released from the necessity to carry
out own attempts for the planned applications under practical conditions. Due to the
different materials, processing methods and local factors onto which we have no
influence, no guarantee – also in patent-legal respect – can be taken over. We
recommend therefore sufficient own attempts. By the way we refer to our General
Business Conditions. Technical changes reserved. Contents examined and released by
merz+benteli ag, CH - Niederwangen/Berne