N2XCH-FE 180/E 30 security cable, halogen-free, 0,6/1kV, with improved
fire characteristics
Technical data
Cable structure
Properties
Ⴠ Halogen-free security cable with improved
characteristics in the case of fire to
DINVDE0266
Ⴠ Insulation integrity
180 minutes to DINVDE0472 part814
Ⴠ Functionality
30 minutes to DINVDE4102 part12
Ⴠ Temperature range
-30 °C to +70 °C
Ⴠ Permissible operating temperature
at conductor +90 °C
Ⴠ Nominal voltage U0/U 0,6/1 kV
Ⴠ Test voltage 4000 V
Ⴠ Minimum bending radius
approx. 15x cable ø
Ⴠ Radiation resistance
up to 200x106 cJ/kg (up to 200 Mrad)
Ⴠ Caloric load values
see Technical Informations
Tests
Ⴠ Flame test to VDE 0482 part 266-2, BS 4066
part 3/ DIN EN 50266-2/ IEC 60332-3
(equivalent DIN VDE 0472 part 804 test
method C)
Ⴠ Corrosiveness of combustion gases
according to VDE 0482 part 267/ DIN EN
50267-2-2/ IEC 60754-2 (equivalent DIN VDE
0472 part 813)
Ⴠ Halogen-free according to VDE 0482 part
267/ DIN EN 50267-2-1/ IEC 60754-1
(equivalent DIN VDE 0472 part 815)
Ⴠ Smoke density according to VDE 0482 part
1034-1+2/ IEC 61034-1+2/ DIN EN
61034-1+2/ BS 7622 part 1+2 (equivalent
DIN VDE 0472 part 816)
Ⴠ Insulation integrity under flame
propagation to VDE 0472 part 814 ฬ IEC
60331 Funktionserhalt von Kabelanlagen
nach DIN 4102 part 12 (30 min)
Ⴠ Bare copper conductor, solid or stranded,
to DINVDE0295 cl.1 or cl.2, BS6360 cl.1
or2, IEC60228 cl.1 or 2, HD383
Ⴠ Core with double insulation:
Flame retardant MICA-tape over conductor
Core insulation with cross-linked
polyethylene, compound type 2XI1 to
DINVDE0276 part604
Ⴠ Cores colour coding to DINVDE0293-308
and 0276 part604
Ⴠ Cores stranded in layers
Ⴠ Overall core covering, halogen-free filling
compound, pressed
Ⴠ Concentric conductor of Cu-bare wires with
helix of copper tape
Ⴠ Outer jacket of thermoplastic halogen-free
polyolefine, compound type HM4 to
DINVDE0276 part604, flame retardant,
colour orange
Ⴠ LS0H = Low Smoke Zero Halogen-free.
Ⴠ Halogen-free; no evolution of corrosive
and toxic gases
Ⴠ Flame retardant
Ⴠ Hardly flammable
Ⴠ Self-extinguished and fire resistant
Ⴠ No flame propagation, therefore security
from fire
Ⴠ Low smoke density, no darkening of
emergency exits without hindering the fire
extinguishing works
Ⴠ Toxicological harmless
Ⴠ No self-ignition
Ⴠ Maintenance of functionality during the
increased current load
Ⴠ FE180: Insulation integrity for 180
minutes. Tests to DINVDE0472 part814
IEC60331.
Insulation integrity under direct flame
propagation for the test period of
180minutes.
Ⴠ E 30: Functionality of electrical cable
systems for minimum 30minutes. Test
method to DIN4102 part12. This fulfils the
demands of technical guide lines for fire
protection (supplement1 to DINVDE0108
part1).
The functionality for 30minutes assures
when persons and animals are to be saved
from a burning building. 30minutes
secures the functional performance of the
fire warning and alarm systems, safety and
spare lighting, passenger lifts with
evacuation circuits, except the cables which
are installed within the ladder shafts and
engine rooms.
Note
Ⴠ rm = round conductor, multiple-wire;
re = round conductor, single-wire.
Ⴠ AWG sizes are approximate equivalent
values. The actual cross-section is in mm².
Application
Everywhere, where in case of fire human life and material assets are to be protected and safety conciousness take a special significance,
e.g. in industrial complexes, power stations, communal establishment, hotels, airports, underground railway networks, hospitals and
outpatients clinic (DINVDE0107), department stores, data processing centres, theaters, cinemas, in multi-storey buildings, public gatherings,
schools etc. (DINVDE0108), mining works, offshore plants, leading centres, traffic communication, emergency power supply and alarm
systems. Suitable for fixed installation in dry and moist rooms, in, above, on and beneath plaster as well as in masonary walls and in concrete.
These cables are suitable for outdoor applications and in underground by using in conduits or tubes.
Additionally valid also DINVDE0298 part1 and 2.
For the installation in conduit all precautions must be taken that no accumulation of water can occur in the pipes.
= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.
Part no.
52098
52099
52100
No.cores x
cross-sec.
mm²
2x1,5 / 1,5 re
2x2,5 / 2,5 re
2x4 / 4 re
Outer Ø
approx.
mm
13,0
14,0
15,0
Cop.
weight
kg/km
52,0
80,0
123,0
Weight
approx.
kg/km
200,0
250,0
310,0
AWG-No.
16
14
12
Part no.
52101
52102
52103
No.cores x
cross-sec.
mm²
2x6 / 6 re
2x10 / 10 re
3x1,5 / 1,5 re
Outer Ø
approx.
mm
16,0
17,5
13,0
Cop.
weight
kg/km
182,0
312,0
66,0
Weight
approx.
kg/km
400,0
570,0
220,0
AWG-No.
10
8
16
Continuation Ⴇ
Q 33
N2XCH-FE 180/E 30 security cable, halogen-free, 0,6/1kV, with improved
fire characteristics
Part no.
52104
52105
52106
52107
52108
52109
52110
52111
52112
52113
52114
52115
52116
52117
52118
52119
No.cores x
cross-sec.
mm²
3x2,5 / 2,5 re
3x4 / 4 re
3x6 / 6 re
3x10 / 10 re
3x16 / 16 re
3x25 / 16 rm
3x35 / 16 rm
3x50 / 25 rm
3x70 / 35 rm
3x95 / 50 rm
3x120 / 70 rm
3x150 / 70 rm
3x185 / 95 rm
3x240 / 120 rm
4x1,5 / 1,5 re
4x2,5 / 2,5 re
Outer Ø
approx.
mm
14,0
15,5
16,5
18,5
21,0
25,5
29,0
31,5
36,5
40,0
46,0
50,5
55,0
61,5
15,0
16,0
Cop.
weight
kg/km
104,0
161,0
240,0
408,0
643,0
902,0
1190,0
1723,0
2410,0
3296,0
4236,0
5100,0
6383,0
8242,0
81,0
128,0
Weight
approx.
kg/km
270,0
360,0
470,0
680,0
960,0
1390,0
1720,0
2320,0
3260,0
4310,0
5520,0
6620,0
8180,0
10620,0
260,0
310,0
AWG-No.
14
12
10
8
6
4
2
1
2/0
3/0
4/0
300 kcmil
350 kcmil
500 kcmil
16
14
Part no.
52120
52121
52122
52123
52124
52125
52126
52127
52128
52129
52130
52131
52132
52133
52134
No.cores x
cross-sec.
mm²
4x4 / 4 re
4x6 / 6 re
4x10 / 10 re
4x16 / 16 re
4x25 / 16 rm
4x35 / 16 rm
4x50 / 25 rm
4x70 / 35 rm
4x95 / 50 rm
4x120 / 70 rm
4x150 / 70 rm
4x185 / 95 rm
4x240 / 120 rm
7x1,5 / 2,5 re
30x1,5 / 6 re
Outer Ø
approx.
mm
17,0
18,0
20,0
22,5
28,0
30,5
32,0
39,5
43,5
49,5
55,5
60,0
68,0
16,5
29,0
Cop.
weight
kg/km
200,0
297,0
504,0
796,0
1142,0
1526,0
2203,0
3082,0
4208,0
5388,0
6558,0
8159,0
10546,0
133,0
499,0
Weight
approx.
kg/km
420,0
540,0
800,0
1150,0
1670,0
2160,0
2860,0
3980,0
5300,0
6740,0
8210,0
10200,0
12900,0
360,0
1070,0
AWG-No.
12
10
8
6
4
2
1
2/0
3/0
4/0
300 kcmil
350 kcmil
500 kcmil
16
16
Dimensions and specifications may be changed without prior notice. (RQ02)
Q
Q 34