HERNON
MANUFACTURING, INC.
®
The Global Leader in High Performance Adhesives & Sealants
Cylinlock 846
6/17/2017
4:57 AM
866-554-4005
INTERNATIONAL: +1 407-322-4000
TOLL FREE:
HERNON.com
®
HERNON
MANUFACTURING, INC.
866-554-4005
INTERNATIONAL: +1 407-322-4000
TOLL FREE:
Cylinlock 846
Description:
PRODUCT DESCRIPTION
Hernon Cylinlock 846 is a fast curing, high strength anaerobic adhesive yielding
higher shear strengths with temperature resistance up to 300F (149C) It provides
relatively quick cures, outstanding solvent resistance, and improved reliability for
metal service applications.
Dispensing Equipment:
INDUSTRIES SERVED
Aerospace, aviation, automotive, electrical, electronics, appliance, defense,
ammunition, marine, engineered plastics, heavy equipment, maintenance, energy
and utilities, industrial assemblies, medical device assemblies, composites.
• Autobonder 2511
• Autosealer 5250
• Autocoater 2111
Similar Products:
• Cylinlock 822
• Cylinlock 826
• Cylinlock 827
• Cylinlock 840
• Cylinlock 842
• Cylinlock 843
• Cylinlock 844
• Cylinlock 845
• Cylinlock 34323
• Cylinlock 42633
• Cylinlock 52631H
• Cylinlock 823
• Cylinlock 824
HERNON.com
866-554-4005
INTERNATIONAL: +1 407-322-4000
TOLL FREE:

121 Tech Drive
Sanford, FL 32771
(407) 322-4000
Fax: (407) 321-9700
www.hernon.com
ISO 9001:2008 Registered
High Performance Adhesives and Sealants
Technical Data Sheet
Cylinlock 846
April 2011
Page 1 of 2
Product Description
Typical Curing Performance
Hernon Cylinlock 846 is a fast curing, high strength
anaerobic adhesive yielding higher shear strengths with
o
o
temperature resistance up to 300 F (149 C) It provides
relatively quick cures, outstanding solvent resistance,
and improved reliability for metal service applications.
Cure Speed vs. Temperature
The rate of cure will depend on the ambient temperature.
The graph shows the shear strength developed with time
at different temperatures on steel pins and collars and
tested according to ISO 10123.
in
Typical Applications
•
Keys in worn keyways
•
Bushings
•
Pins, wheels, gears, pulleys
100
% of Full Strength on Steel
NSF International
Certified to ANSI/NSF Standard 61 for use
commercial and residential potable water systems
75
40ºC
50
22ºC
25
0
1m
5m
15m
30m
1h
3h
6h
24h
72h
Cure Time
Typical Properties (Uncured)
Property
Value
Chemical Type
Methacrylate Ester
Appearance
Green fluorescent liquid
Specific Gravity
1.09
Fluorescence
Positive
Viscosity @ 25ºC, cP
1000 - 1500
Flash Point
See MSDS
Cure Speed vs. Primer
When cure speed is unacceptably long (because of
substrate, temperature or gap), performance may be
improved by treating the surface with Hernon EF
Primer 49 or 50. The graph below shows shear
strength developed with time using EF Primer 49 and
50 on steel pins and collars and tested according to ISO
10123.
Typical Properties (Cured)
100
Property
Value
Temperature Range
10 to 300°F
Fixture time, Brass Nuts/Bolts
1 – 2 minutes
Fixture time, Steel Nuts/Bolts
5 – 6 minutes
Shear Strength Steel Pin and Collars
≥ 2500 psi
% of Full Strength on Steel
24 hr RT cure @ 22°C
75
EF Primer 49
50
No Primer
EF Primer 50
25
0
1m
5m
10m
30m
1h
Cure Time
3h
6h
24h
72h
SAFETY DATA SHEET
Issue Date 19-Aug-2015
Revision Date 29-Oct-2015
Version 1
1. IDENTIFICATION
Product identifier
Product Name
Cylinlock 846
Other means of identification
Product Code
UN/ID no.
Synonyms
MS-846
None
None
Recommended use of the chemical and restrictions on use
Recommended Use
Anaerobic Adhesive.
Uses advised against
None known
Details of the supplier of the safety data sheet
Manufacturer Address
Hernon Manufacturing Inc.
121 Tech Drive
Sanford, FL 32771
800-527-0004
Emergency telephone number
Company Phone Number
Emergency Telephone
407-322-4000
Chemtel 800-255-3924
2. HAZARDS IDENTIFICATION
Classification
OSHA Regulatory Status
This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Acute toxicity - Inhalation (Dusts/Mists)
Skin corrosion/irritation
Serious eye damage/eye irritation
Skin sensitization
Specific target organ toxicity (repeated exposure)
Category 4
Category 4
Category 2
Category 2A
Category 1
Category 2
Label elements
Emergency Overview
Warning
Hazard statements
May cause an allergic skin reaction
Causes serious eye irritation
May be harmful if inhaled
Toxic to aquatic life with long lasting effects
May cause respiratory irritation. May cause drowsiness or dizziness
_____________________________________________________________________________________________
Page 1 / 9