PROJECT INFORMATION
MEDMASTER™
Surgical Suite Luminaires
Job Name
Fixture Type
M3SE SERIES – LF
Catalog Number
PRODUCT FEATURES:
Approved by
2×2
»» Surface ceiling mount – 2'×2', 2'×4'
»» High output Exam lighting up to 8 lamps (2×4)
»» Symmetrical high reflectance powder coat reflectors
»» Sureshield™ mesh filter reduces radiated emissions
2×4
SPECIFICATIONS
HOUSING: .050" aluminum. Hole-free seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Antimicrobial finish is
standard on exposed painted surfaces of installed luminaire.
DOORFRAME: 18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe
secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners. Antimicrobial finish is standard on exposed painted surfaces of installed
luminaire. Doorframe Gasket: One-piece closed cell extruded nitrile gasket seals lens frame to housing.
LENS: Two piece design. Smooth lens exterior is .125" clear acrylic, sealed to doorframe with silicone sealant. Interior lens is .030" acrylic micro linear prism, both lenses mechanically secured in
place. See options for alternate lens.
OPTICS: Symmetric reflectors are CRS with a high reflectance powder coated surface. Green phosphor lamps (GL Option) available.
SURESHIELD™: Stainless steel mesh filter reduces radiated emissions.
ELECTRICAL: Electronic ballast <10% THD. Standard with 4 two-lamp ballasts and 4 RFI suppressors. Lamps by others.
INSTALLATION: Four .312" holes for surface mounting.
LISTINGS: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. Radiated and conducted emissions controlled as per MIL-STD-461F (standard with RS
ballast). CCEA Approved.
ISO 5
IP65
Class 100
MIL STD
461F
ORDERING INFORMATION (Ex: M3SESI24-8-54-RS-120-2F-PAH-MLP)
Model
Lamp Qty/Type
Ballast Type
Voltage
Doorframe
Housing
RS
Ballast Type
RS Rapid Start Electronic <10% THD
Model
M3SESI22 2×2
M3SESI24 2×4
Housing Option
PAH .050" Painted
Antimicrobial Aluminum
Voltage
120 120 Volts
277 277 Volts
Lamp Qty/Type
2×2
6-24 Six F24T5HO
Doorframe Options
2F 18-Ga CRS Painted Antimicrobial (STD)
AF Anodized Aluminum
PAF Painted (Antimicrobial) Fabricated Aluminum
5F 18-Ga Type 304 SS Brushed
2×4
8-54 Eight F54T5HO
Lens Type
Options
PAH
Options
EL* Standard Lumen EL Pack
PEL* High Lumen EL Pack
SEL* Specified EL Pack
FS Fuse & Holder
GL Green Phosphor Lamps
(54W T5HO, 550nm only, 2 lamps included)
HD Hinged Door (w/o NSF listings)
HJ Sealed Wireway
RFI Additional RFI filter (1)
Lens Type
MLP Micro Linear Prism (STD)
SL Specified Lens
*Remote mounted; adds 3" height to fixture
DIMENSIONAL DATA
GASKET PROFILE
Doorfame
CROSS SECTION
MOUNTING HOLES
(4) .312 (8mm) Mounting Holes
A
Housing
Fixture
Housing
C
7.63"
Gasket
D
B
Doorframe
DIMENSIONAL DATA (IN INCHES)
2×2
2×4 www.kenall.com
A BC D
22.60×24.1322.20×23.72 12.00
22.60×48.1322.20×47.72 12.00
P: 800-4-Kenall
F: 262-891-9701
12.00
36.00
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
M3SESI_22_24-012714