Sparrow T580 Bump Case FPC58-2835-02.fm Page 1 Wednesday, January 19, 2011 1:16 PM
F U J I T S U
A M E R I C A ,
I N C .
Convertible Bump Case
User’s Guide
I N S T R U C T I O N S
This case is designed to provide a compact, elegant solution
for using and transporting your LIFEBOOK Tablet PC.
The convertible bump case is designed so that you can use
your system either in notebook or tablet configuration.
Figure 1. Convertible Bump Case
To open the case, unzip the wraparound zipper (Figure 2)
and lift the cover. Open the case so that it lies flat.
Sparrow T580 Bump Case FPC58-2835-02.fm Page 2 Wednesday, January 19, 2011 1:16 PM
Pen Holder
Protective Cover
D-Ring
Velcro
Flaps
Wrap-around zipper
D-Ring
Figure 2. Closed Case (Top)
Notebook Configuration
To use your system in notebook configuration:
1. Open your Tablet PC so that the display is in notebook
configuration.
2. Place the system into the case and tuck the front corners
of the keyboard under the clear corner straps. (Figure 3)
3. Be sure the tablet is inserted completely in the base so
that it is lying flush against the bottom.
4. Close the case cover and zip up the wraparound zipper.
Check the Power Switch area, and be sure the fabric
adjacent to the zipper has been folded inside the case to
allow access to the switch.
2
Sparrow T580 Bump Case FPC58-2835-02.fm Page 3 Wednesday, January 19, 2011 1:16 PM
Clear
Corner
Strap
Clear Corner Strap
Figure 3. Putting System in Notebook Configuration
Tablet Configuration
To use your Tablet PC in tablet configuration:
1. With your Tablet PC in notebook configuration (as outlined above), fold the top of the case down so the display can rotate without interference.
2. Rotate the screen (Figure 5) and lie it flush with the
keyboard.
3. Close the case cover and zip up the wraparound zipper.
4. Undo the two Velcro flaps securing the cover and flip
the cover over the back of the case (Figure 6). The Velcro flaps can be folded in half and secured to their lower
half to prevent them from interfering with the display.
3
Sparrow T580 Bump Case FPC58-2835-02.fm Page 4 Wednesday, January 19, 2011 1:16 PM
5. Tuck the cover under the elastic strap to stow it away.
Figure 4. Notebook Configuration
Figure 5. Rotating Display
4
Sparrow T580 Bump Case FPC58-2835-02.fm Page 5 Wednesday, January 19, 2011 1:16 PM
Protective
Cover
(wrapped
under)
Velcro
Flap
Velcro
Flap
Figure 6. System in Tablet Configuration
Shoulder Strap
There are D-rings on all four corners of the case. Two of
them are on the top corners, adjacent to the wraparound
zipper; the other two are underneath the diagonal elastic
protective strips on the rear bottom corners. To attach the
shoulder strap, open the spring-loaded clips on the end of
the strap, and attach them to two of the D-rings. The D-rings
can also be used as an attachment point for a pen tether.
(Figure 7 shows the location of the D-rings.)
5
Sparrow T580 Bump Case FPC58-2835-02.fm Page 6 Wednesday, January 19, 2011 1:16 PM
D-rings (under protective elastic covers)
D-ring
D-ring
Figure 7. D-Ring Locations
Caring for the Case
The convertible bump case is made of rugged materials, and
is designed to withstand daily use. Treat the case as you
would a quality briefcase or purse.
Occasionally, the case may become soiled. To clean it,
brush it with a short-bristled brush. If necessary, use a clean
cloth and warm soapy water to wash the soiled area. Do not
submerge the case in water, as it may become warped.
6
Sparrow T580 Bump Case FPC58-2835-02.fm Page 7 Wednesday, January 19, 2011 1:16 PM
7
Sparrow T580 Bump Case FPC58-2835-02.fm Page 8 Wednesday, January 19, 2011 1:16 PM
Fujitsu America, Incorporated
1250 E. Arques Avenue,
Sunnyvale, CA 94085
For more information, call 1-877-372-3473 or visit our Web
site at: http://us.fujitsu.com/computers
For technical support call:1-800-8fujitsu
(1-800-838-5487) or e-mail us at: [email protected]
Fujitsu, the Fujitsu logo, and LIFEBOOK are registered trademarks
of Fujitsu, Ltd. All other trademarks mentioned herein are the property of their respective owners. Fujitsu America, Inc. has made
every effort to ensure the accuracy and completeness of this document. As ongoing development efforts continually improve the
capabilities of our products, we cannot guarantee the accuracy of
the contents of this document. We disclaim liability for errors,
omissions, or future changes.
© 2011 Fujitsu America, Incorporated. All rights reserved.
FPC58-2835-02
8