TRIPLES-H 132/8 SLOPE
recessed compact
made-to-order
•
m ay
not
fluorescent
be
returned
for
sloped
credit
•
ceiling
made-to-order
Spec Sheet
COMPACT
FLUORESCENT
1-391
downlight
•
m ay
not
be
returned
for
credit
Features
Triples-H 132/8 Slope is an efficient 8” aperture low brightness downlight
for use in sloped ceilings. Fixture is made in eight different configurations
conforming to ceiling slopes of 5°, 10°, 15°, 20°, 25°, 30°, 35° and 40°.
Triples-H 132/8 Slope provides shielding angles of 40° parallel to and
40° perpendicular to the lamps. Recess depth varies with ceiling slope but
is never greater than 11 1/2” (see table below drawing).
Triples-H 132/8 Slope is designed for use with a single 32-watt, 4-pin,
triple-tube lamp which provides 2400 lumens, a 10,000-hour life, a color
rendering index (CRI) of 82, and color temperatures as warm as 2700° K.
Fixture may be relamped from below without removing reflector.
Reflector consists of a single, seamless aluminum spinning from lamp to
ceiling line, resulting in a uniquely elegant appearance. (No added ‘slope
adaptors’; no joints; no obtrusive mismatches of color, contour or finish.)
Reflector is available in clear, natural aluminum
in two finishes: slightly diffuse (V) or fully
diffuse (EC). Additionally, reflector is
available in champagne gold, wheat,
pewter and bronze. Other reflector finishes
are available on special order.
The elliptical edge of the reflector is trimmed
with a 1 1/8” wide steel flange to conceal the
edges of the ceiling installation hole. Standard flange finish is white;
custom paint finish available on special order.
Triples-H 132/8 Slope includes a pair of mounting bars (3/4” x 27” C
channel). Specialty bars for wood joist and T-bar installations are available as accessories.
30° slope configuration shown
fixture dimensions
5° Slope
10° Slope
15° Slope
20° Slope
Fixture Depth
8 1/2” 9 1/4”
9 3/4”
10 1/4”
Fixture Footprint
13 /8” x 14”
13 /8” x 14”
13 /8” x 15”
13 1/8” x 15”
40° Slope
1
1
25° Slope
30° Slope
35° Slope
Fixture Depth
10 3/4” 11 1/8”
11 3/8”
11 1/2”
Fixture Footprint
13 1/8” x 16”
13 1/8” x 16”
13 1/8” x 17”
13 1/8” x 18”
PRODUCT CODE
For a complete product code, list basic unit and select one code item from each following box.
Basic Unit......................................................................TRPH 132/8 SLOPE
APPLICATIONS
Fixture is recommended for
downlighting in sloped
ceilings in offices, retail
and institutional spaces,
especially in lobbies, corridors
and public areas. The shallow recess
depth allows mounting in constricted
plenum situations.
Fixture is
listed for Damp Location
(may not be suitable for some outdoor environments). Fixture is in compliance with the component
based efficiency standards of the 1995 New York State Energy
Conservation Code. Fixture is prewired with high power factor Class
P electronic ballast and approved for eight #12 wire 75°C branch circuit
pull-through wiring. Removal of the reflector allows access to the ballast
and junction box.
1
Slope
5°..........................................–05
15°........................................–15
25°........................................–25
35°........................................–35
10°..........................................–10
20°..........................................–20
30°..........................................–30
40°..........................................–40
Voltage
120 volt service.................... 120
277 volt service.........................277
Reflector and Flange Color
Slightly diffuse Clear..................–V Fully diffuse Clear..................... –EC
Champagne Gold.................... –G Wheat....................................–WH
Pewter...................................... –P Bronze.......................................–Z
Other reflector finishes are available on special order.
Standard trim flange finish is white.
Custom painted flanges are available on special order; add CCF (custom color flange).
Example: TRPH 132/8 SLOPE-30-120-V is the product code for a fixture prepared for 30˚ slope
and 120-volt service with clear reflector.
OPTIONS Specify by adding to the basic unit.
Dimmable 3-wire ballast. Not for outdoor application............................. – DM
Emergency battery pack operates one lamp in case of power outage.
Footprint increases by 3 1/8” on one side. No outdoor application . .................. – EM
A modified fixture suitable for 347-volt service is available on special order. Contact factory.
We recommend the use of Sylvania Dulux® T/E (non-amalgam) lamps to virtually eliminate the
possibility of reduced light output sometimes caused by a return air plenum or a nearby elevator,
exterior door or air conditioning diffuser.
41-50 22ND STREET, L IC NY 11101
©
Copyright, Edison Price Lighting 2015
tel
718.685.0700 fax 718.786.8530 www.epl.com
1:15
TRIPLes-h 132/8 SLOPE
made-to-order
•
m ay
not
be
returned
for
credit
•
made-to-order
•
m ay
not
be
returned
Note: The test below is based on a flat ceiling (0˚ slope) fixture. The photometric effects of modifying the fixture for a sloped ceiling are as follows:
• asymmetry of distribution increases with slope as more and more light is blocked by the long side of the reflector
• spacing criteria are reduced slightly as slope increases, with an estimated 5% reduction at 40˚ slope
• efficiency is reduced slightly as slope increases, with an estimated 10% reduction at 40˚ slope
PHOTOMETRIC REPORT
Luminaire Testing Laboratory Report No. 05293. Original test report furnished upon request.
Luminaire............. recessed compact fluorescent downlight with spun aluminum reflector
Lamp................... Philips 32-watt triple-tube compact fluorescent, 4-pin, GX24q-3 base, 2400 lumens
Efficiency............. 70.2%
Spacing Criteria..... 0°- 1.5, 90°-1.7, 180°-1.7
Axis orientation.... 0° plane is parallel to lamps, opposite sockets
ZONAL LUMEN SUMMARY
CANDLEPOWER DISTRIBUTION
Zone
0- 30°
0- 40°
0- 60°
0- 90°
90-180°
0-180°
Horizontal Angle
Vertical Angle
0.0
45.0
90.0
135.0
180.0
Lumens
% Lamp
694
1243
1684
1684
0
1684
28.9
51.8
70.2
70.2
0.0
70.2
LUMINANCE DATA
Vertical
Angle
% Fixture
41.2
73.8
100.0
100.0
0.0
100.0
17399
161
0
0
0
20844
376
0
0
0
693
685
673
847
755
399
3
0
0
0
0
693
703
733
927
906
478
7
0
0
0
0
693
712
752
866
962
528
12
0
0
0
0
693
711
743
924
883
492
10
0
0
0
0
693
704
740
972
898
580
6
0
0
0
0
BALLAST INFORMATION
(Candela/m2)
Average
Average
Average
0° Longitude 90° Longitude 180° Longitude
45
55
65
75
85
0
5
15
25
35
45
55
65
75
85
90
(Candela)
23024
645
0
0
0
Voltage
120
Input Watts
36
36
Line Current (A)
.30
.13
Power Factor (%)
>98
>98
THD (%)
<10
<10
0
0
Min. Starting Temp* (°F)
To convert cd/m2 to footlamberts, multiply by 0.2919.
277
*Consult lamp manufacturers for specific temperatures.
COEFFICIENTS OF UTILIZATION – ZONAL CAVITY METHOD
Effective Floor Cavity Reflectance 20%
Ceiling Reflectance (%)
Wall Reflectance (%)
80
70
70
50
30
10
0
50
30
10
70
50
30
10
50
30
10
50
30
10
50
30
10
0
83
77
71
65
60
55
50
46
41
37
33
83
75
68
61
55
50
45
41
36
32
28
83
73
65
58
52
46
42
37
33
28
25
82
77
73
69
64
60
56
52
48
44
41
82
75
70
64
59
54
50
45
41
37
33
82
74
67
60
55
49
45
40
36
32
28
82
72
64
58
52
46
42
37
32
28
25
78
73
67
62
57
53
48
44
40
36
32
78
71
65
59
54
49
44
40
35
31
28
78
70
63
57
51
46
41
37
32
28
25
75
70
65
60
56
51
47
43
39
35
32
75
69
63
58
53
48
44
39
35
31
28
75
68
62
56
50
45
41
37
32
28
25
72
68
63
59
54
50
46
42
38
34
31
72
67
62
57
52
47
43
39
35
31
27
72
66
60
55
50
45
41
36
32
28
25
70
65
59
54
49
44
39
35
31
27
24
Room Cavity Ratio
0
1
2
3
4
5
6
7
8
9
10
83
79
75
70
66
61
57
53
49
45
42
for
credit