Soap/Lotion Dispenser
INSTALLATION INSTRUCTIONS
P25215
1104266_2_B
1 of 3
P25015
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Soap/Lotion Dispenser
INSTALLATION INSTRUCTIONS
Thank You For Choosing Kallista
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
Before You Begin
‰‰ Observe all local plumbing and building codes.
‰‰ The appearance of the pump assembly may differ from the illustrations. The installation instructions still
apply.
‰‰ For installation on a thin deck, slide the washer (provided) onto the shank before tightening the nut onto the
shank.
‰‰ Kallista reserves the right to make revisions in the design of faucets without notice, as specified in the Price
Book.
Installation
1.Slide gasket onto underside of escutcheon.
2.Insert blunt end of tube into pump assembly.
O-ring
Tube
3.Insert pump assembly through
hole.
4.Tighten nut onto shank.
Nut
1104266_2_B
2 of 3
Washer
(for thin deck
installations)
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Soap/Lotion Dispenser
INSTALLATION INSTRUCTIONS
Installation
5.Fill bottle with soap/lotion.
6.Thread bottle into shank
NOTE: Only fill bottle to 1-1/2”
from top to prevent overflow.
until handtight.
Shank
Bottle
7.To re-fill bottle with soap/lotion, lift up on pump assembly.
NOTE: Only fill bottle to 1-1/2” from top to prevent overflow.
1104266_2_B
3 of 3
Pump Assembly
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.