HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
HCT - Technology Changing How We Live
PC-3106P (Optical Particle Counter)
PC-3106P is an instrument which can measure the particles suspended in the air above 0.3μm in diameter. Its sampling flow rate is 1 CFM
( 28.3L/min ). It provides several analog input (4~20mA) terminals for external sensor or probe – air velocity, temperature & humidity, differential
pressure, etc. PC-3106P complies with the requirements of ISO 21501-4 or JIS B9921 and is calibrated using a condensation particle counter with
NIST traceable PSL. PC-3106P provides measurement result reports for ISO 14644-1 and FS209E via the onboard thermal printer. Measurement data
can be stored in the internal memory up to 30,000 records.
PC-3106P can either be used as a stand-alone particle counter or as a part of in the Facility Monitoring System (FMS).
Feature and Benefits
• Up to 6 channels of simultaneous particle count data
• Data storage 30,000 samples records
• 4 to 20 mA input (T/H, Velocity, Diff. Pressure)
• Touch screen operation
• Reports for ISO14644-1, FS209E
Applications
• Cleanroom Monitoring
• Facility Monitoring
• Hospital Surgical Suites
• Pharmaceutical
• Electronics (Semiconductor, Flat Panel, LED,Hard Disk) Monitoring
SPECIFICATIONS
Particle channel sizes
0.3, 0.5, 1.0, 5.0, 10, 25 ㎛ or 0.3, 0.5, 1.0, 3.0, 5.0, 10 ㎛ , 6ch
Counting efficiency
50% at 0.3 ㎛, 100% for particles > 0.45 ㎛ (Meets ISO and JIS Standards)
Concentration limit
< 1,000,000 / ft3 at 5% coincidence loss
Light source
Laser diode
Zero count
< 1 count per 5 minutes (per ISO21501-4 and JIS B9921)
Flowrate
28.3 L/min (1.0 CFM) ± 5% accuracy (meets ISO 21501-4 and JIS B9921)
Sampling time
1 sec ~ 1 hrs
Data storage
30,000 samples records (internal memory)
Communication
Ethernet, USB Serial, RS 485
Printer
Thermal Printer
Vacuum source
Internal pump
Battery
Li –Ion battery
Battery runtime
3 hours (2 Battery)
Dimension (LWH)
30 x 24 x 23 cm(11.8 x 9.45 x 9.05 in)
Weight
5.2 kg(11.46 lbs)
Power
24V / 4.0 Adapter 100 ~240VAC, 50/60 Hz
Parts Number
6C06008
6C06007
6P02016
7004022
6P02030
8007141
9005011
1401017
Power Cable
USB Download cable, type A to B & LAN cable
Li-Ion battery
Purge Filter Assy
Adaptor
Software program CD
Printer paper
Isokinetic probe & Cap
HCT Instruments INC. 1229 38th Ave N MS – 161, Myrtle Beach, So Carolina 29577 Tel: 970-481-5721, Email. [email protected] www.hctinstruments.com
HCT - Technology Changing How We Live
HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
HPS-0405W (Hybrid Particle Sensor)
HPS is a new product that combines the functions of the existing Optical Particle Counter and Virtual Impactor all into one package. It can count the
number of particles per particle size and also sample the particles at the same time.
Feature and Benefits
Real Time Insitu Particle Counting and Sizing With
Particle Capture For Off Line Analysis
• Four Channels of Simultaneous Particle Count Data
• Ease to install
• Easily installed in the Process Equipment Eliminating Transport Tubing Losses
• Ag Sample Collecting Plate for Off line Particle analysis
• Meets or Exceeds current JIS (JIS : Japanese Industrial Standards)
Sensor inside
Applications
• Clean Room and Facility Monitoring
• Particle Trend Analysis
• Indoor Air Quality (IAQ) Analysis
• Real Time InSitu Particle Monitoring in the Process Equipment.
SPECIFICATION
Size range
Particle channel sizes
Counting efficiency
Flow rate
Max. concentration
Sampling time
Light source
Zero count level
Vacuum requirement
0.5 ~ 10.0 ㎛
0.5, 1.0, 2.0, 5.0㎛ (4ch) or 0.5, 1.0, 5.0, 10.0 (4ch)
50 % at 0.5 ㎛ , 100 % > 1.0 ㎛
28.3 L/min (1.0 CFM) ) ± 5% accuracy
1,000,000 particles/CFM @ 0.5 um
1 sec ~ 60 sec
Laser Diode (35 mW)
< 1/sec @ 5 min.
External Vacuum Pump ( < 160 mmHg )
Communication
Enclosure
Surface of sampling plate
Dimension (LWH)
Weight
Power (main)
90 Kpa ± 10% (Vacuum)
Ethernet
Steel
Ag coated
7 x 14 × 12.5 cm (2.8 x 5.5 x 5 in)
0.89 kg (1.96 lbs)
100 ~ 230 VAC, 50 ~ 65 HZ
(Adapter)
* System components excluded : Stand
Parts Number
• 1001027
• 1003004
• 1003003
• 1003002
5V, 4A
▼ Before Sampling
Main inlet
Inlet tube connector
Stand (for bottom)
Bracket (for wall)
▼ HPS Monitoring Software
300
1.0 mm
2.0 mm
5.0 mm
10.0 mm
▼ After Sampling
Particle Counts, #.sec
250
200
150
100
50
0
0
100
200
300
400
500
600
700
800
900
1000
Time, sec
HCT Instruments INC. PO Box 3532 Myrtle Beach, SC 29578 T. 843-808-9224, Email. [email protected] www.hctinstruments.com
HCT - Technology Changing How We Live
HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
CAS-01 (Clean Air Supply)
AG-01 (Aerosol Atomizer)
Aerosol generation is very important and necessary in the field of
aerosol science.
AG-01 is a nebulizer type aerosol generator. Aerosol jets generated by
compressed air throughout the critical orifice collide with the wall inside
AG-01. Small droplets (including particle droplets) divided by impaction
is exhausted outside AG-01.
Application:
SPECIFICATIONS
• Filter Media Test
• Particle generation in wind tunnel
• Particle deposition in wafer deposition system
SPECIFICATIONS
•
•
•
•
•
•
•
Air Flow Rate : 4.5 L/min at 2.5 kg/cm3
Particle Concentration : < 106 particles/cm3
Geometric Standard Deviation : 1.3 ~2.0
Pressure Source : Air compressor
Number of Jets : 1
Dimensions (height) : 130 mm (5.12 in)
Weight : 0.5 kg (1.1 lbs)
• Part Number
§ 2601003
§ 2601004
§ 2601001
§ 2601006
Clean Air Supply, CAS-01 can provide clean and dry compressed air for
aerosol experiments.
The Water & Oil trap removes large water & oil drops included in the
compressed air. Compressed air is then dried in the desiccant dryer,
then exhausted throughout the HEPA filter.
.
Maximum pressure : 10 kg/cm3
Flow rate : 50 LPM (Max.)
Dimension (LWH): 450 x 240 x 400 mm (17.7 x 9.45 x 15.7 in)
Weight : 10 kg (22.05 lb)
•
•
•
•
• Part Number
§ 2501004
§ 7004004
Oil trap
HEPA Filter
Orifice 0.3 mm
Orifice 0.5 mm
Lid (tempered glass)
Lid (Quartz)
XRC-05 (Soft X-Ray Charger)
XRC-05 is a bipolar charger that uses soft X-ray instead of radioactive
source such as Am241 (Americium-241), Kr85 (Krypton-85), Po210
(Polonium-210). It changes irregularly charged particles to equilibrium
charged state. Particles introduced into XRC-05 is collided with ions (+)
or electrons (-) generated by soft X-ray radiation. Ions or electrons
being attached onto the particle surfaces, neutralizing the particles.
XRC-05 does not generate Ozone due to its air ionization effect.
DD-01 (Diffusion Dryer)
DD-01 removes water vapors contained in the aerosol and dries-off
water on the surface of the droplet.
The Water & Oil trap mounted at the inlet of DD-01 removes large
water & oil drops. Aerosols are dried by the diffusion of water vapor
in the desiccant dryer filled with molecular sieve or silica gel.
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Ion Generation Method: Soft X-ray
Source: Soft X-ray tube
Power Consumptions: 7.2W
Cooling Method: Natural cooling
Weight: 1.11 kg /2.45 (lb)
Input Power: AC 100~240V,
50/60Hz (Adaptor Input) DC 12V, 3.33A
Life Time: 1 year
Indicating: Ion generation indicating
Dimension (LWH):273 X 72 X191 mm (10.8 x 2.8 x 7.5 in)
• Part Number
§ 2302002
§ 2302004
DC 12V Adapter & power cord
Safety Key
SPECIFICATIONS
•
•
•
•
Flow rate : 0 ~ 5 L/min
Maximum pressure : 420kPa
Relative humidity ; 20 % when incoming R.H. is 60 %
Dimension (LWH): 570 x 160 x 210 mm ( 224.4 x 6.3 x 82.7 in)
• Part Number
§ 2401001
§ 2401002
§ 2401003
§ 2401004
§ 2401005
§ 9005009
Lid
Stand
Water trap
Outer Cylinder
Inner Diffusion Screen
Silica gel (Optional)
HCT Instruments INC. 1229 38th Ave N MS – 161, Myrtle Beach, So Carolina 29577 Tel: 970-481-5721, Email. [email protected] www.hctinstruments.com
HCT - Technology Changing How We Live
HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
AS-03 (Air-Sampler)
VI-104 (4-Stage Impactor)
Due to strict environmental rules, it is highly necessary to sample
aerosols or gas-phase materials. Especially, the product protection
against fine particles or gas-phase materials is essential in
semiconductor, LCD or any precision manufacturing fields. The Model
AS-03 is the instrument to sample these gas-phase materials.
According to environmental regulations, it is needed to analyze
airborne particles to identify their components or composition. Such
particles should be collected to be analyzed. VI-104 is the instrument to
be used to collect them.
Application:
Portable sampler
Maximum of 12 hours (Using a built-in battery for operating with 2
LPM)
User-friendliness
• The touch screen enables a convenient control.
• The sampling start or shutdown can be scheduled using the built-in
timer.
• Sampling can be done by setting either the sampling time or the
total flow rate.
• Aerosol Research : Particle sampling, collection, generation and
transport
• Particle analysis in clean-room and associated controlled environments
• Indoor and outdoor air quality research
• Bio-aerosol research
Optimization for clean-room environments
A built-in HEPA filter is used to prevent contamination by a pump,
optimal for sampling in a clean-room
Accuracy of flow rates
• The differential pressure sensor assures a higher accuracy for the air
sampler.
• Guarantee of the accuracy of flow rates (±5% full scale) throughout
flow rate correction.
Application:
• Sampling in hospital or bioengineering research center
• Sampling in clean-room
• Sampling in factories or industrial field
SPECIFICATIONS
• Sampling flow rate : 20 L/min
• Particle Cut-off Diameter: 1.0, 2.5, 5.0 and 10 μm
• Front panel display : Touch screen LCD Panel
(Set-up reserved time / operation time / Display present time)
• Dimension (LWH):
Controller : 320 x 235 x 240 mm (12.6 x 9.3 x 9.5 in)
Impactor : Ø78 x 265 H mm (Ø78 x 10.4 in)
• Weight : 6.5 kg (14.3lb)
• Power : 100 ~ 240 VAC, 50/60 Hz
• Part Number
§ 6C06001
Power Cable
§ 7004004
HEPA Filter
DMA-20/05 (Differential Mobility Analyzer)
SPECIFICATIONS
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Sampling flow rate : 1~3L/min
Flow rate accuracy : ± 5 % of full scale
Gas temperature range : 10~50°C
Gas pressure range : 1 ± 0.2 ATM
Operating hours : 12 hrs @ 2 L/min
(in full charging battery)
Battery charging time : 4~5 hrs
LCD display : Graphic color LCD (400 x 240 pixel)
Dimensions (LWH) : 160 x 190 x 190 mm (7.5 x 6.3 x 7.5 in)
Impinger : 240 mm x Ø 45 (9.5 lb x Ø 45)
Weight : 2.6 kg (5.7 lb)
Power : 100~240 VAC, 50/60 Hz
• Part Number
§ 6C06001
§ 1901001
• Particle Size Range :
- DMA-05 : 2 ~ 160 nm
- DMA-20 : 7 ~ 830 nm
• Maximum input concentration : 107 particles/cm3 @ 10 nm
• Aerosol pressure range : 1 ± 0.1 ATM
• Flow rate :
- Aerosol : 0.1~1.5 L/min
- Sheath Air : 1 ~ 15 L./min
- By pass : None
• Voltage : 10 ~ 10,000 VDC
• Dimensions : DMA-05 : 210 x 36 mm (8.3 x 1.4 in)
DMA-20 : 420 x 76 mm (16.5 x 3.0 in)
• Weight : DMA-05 : 2 kg (4.41 lb) / DMA-20 : 7 kg (15.43lb)
Application:
• Aerosol research : particle generation,
nucleation, condensation, coagulation and
transport
• Particle charging and electrical mobility
studies
• Filter media test
• Mono-disperse particle generation for
instrument calibration
Power Cable
Impinger
HCT Instruments INC. 1229 38th Ave N MS – 161, Myrtle Beach, So Carolina 29577 Tel: 970-481-5721, Email. [email protected] www.hctinstruments.com
HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
HCT - Technology Changing How We Live
WCPC-1003S(Water-based Condensation Particle Counter)
A new approached is applied using particle condensation technique. When a particle is place in a super-saturated vapor, the super-saturated vapor
molecules will start condense onto the particle. The particle with condensed vapor will continuously grow and become a large droplet. This large size
droplet can easily be detected by optical electronic system.
Benefits and Applications
§ Single Particle Counting with real-time for accurate measurement (0 ~ 10,000 particles/ cm3)
§ With water as the working fluid and HEPA-filtering of the exhaust – use the clean room environment
§ With High Pressure Diffuser(HPD-75), Possible to Monitoring in high pressure gas lines
Feature
§ 10 nm Detection Limit
§ 2.83 L/min of aerosol Flow rate
§ Built-in Color Touch Screen Display (7“)
§ Adopted in Internal Thermal Printer
§ Contaminant particle detection in cleanroom and high purity gas
systems
§ Ethernet, USB Serial Communication
SPECIFICATIONS
Particle Size Range : Min. Detectable Particle(D50): 10 nm, verified with DMA-classified
Particle Concentration Range : Single Particle Counting: 0 to 10,000 particles/ ㎤
Particle Concentration and Accuracy : ±10 % at 10,000 particles/㎤
Flow rate : 2.83 ± 0.28 L/min
Response Time : ~ 0.8 sec., (95% Response to Concentration Step Change)
False Background Counts : ~5x10-6 /㎤, 12 hrs average
Aerosol Medium : Inert Gas for Air, N2, Ar
Environmental Operating Conditions : Ambient Temp. & Humidity: 10 to 35℃
and 0 to 90% RH, Non condensing
The efficiency curve
Inlet Pressure : 75 to 110 kPa
Working Fluid : Distilled Water only
100
90
Vacuum : Internal Vacuum Pump
80
Outputs : USB Serial, Ethernet, SD Card, Internal Thermal Printer
70
Digital Display: 7” Color touch screen
Power : Adapter for 24 VDC, 6.0A
Communication: USB
Efficiency , %
Water Supply System : External 1 Liter Bottle used (5 days of continuous operation)
60
50
40
Dimensions (LWH): 310 x 200 x 270 mm (12.2 x 7.9 x 10.6 in)
30
Weight: 9.4 kg (20.7 lb)
20
Parts Number
•
•
•
•
•
•
•
10
6C06001
7004014
7008001
9005011
6C06007
9003005
2602022
Power Cable
CPC Extra Filter
Drain Bottle / Fill Bottle
Printer paper
USB Download cable, type A to B & LAN cable
Sampling Tube (1 m)
Monitoring software Program
0
1
10
100
Particle diameter , nm
HCT Instruments INC. 1229 38th Ave N MS – 161, Myrtle Beach, So Carolina 29577 Tel: 970-481-5721, Email. [email protected] www.hctinstruments.com
HCT - Technology Changing How We Live
HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
DI-120 (Aerosol Dilutor)
HCT Model DI-120 reduces particle concentrations of high-concentration aerosols.
Feature & Benefits
• Highly repeatable performance
• Dual pressure gauges (indicate correct operation or signal need for maintenance)
• Require NO power or NO compressed gas.
• Simple maintenance
• Trouble-free cleaning.
DI-120 test using the 0.3mm PSL
140
SPECIFICATIONS
1.2 LPM
1.5 LPM
120
100
• Dilution ratio : 1:100
• Dimensions (LWH) : 85 x 420 x 107 mm ( 3.35 x 16.54 x 4.21 in)
• Weight : 9.82 kg ( 21.65 lbs)
Dilution ratio
• Sample flow : 1 LPM (1.2 / 1.5 optional)
80
60
40
20
0
0
5
10
15
20
25
30
Clean Air Gauge (mmH2O)
HPD-75 (High Pressure Diffuser)
Connecting pressurized air or gas to a particle counter is able to damage the instrument. HPD-75 can reduce the pressure of these gases and allow
the particle counter’s flow metering system to function as designed.
No external flow meters needed
SPECIFICATIONS
• Air Flow Rate: 0.1 CFM
• Material: Stainless steel body with orifice, exhaust filter
• Pressure: 35 ~ 75 psi for 0.1 CFM
• Inlet fitting: ¼” VCR Male Connector
• Exhaust fitting: ¼” tube type
• Sample gas: Dry, inert, non-toxic, non-flammable gases
(CDA, Nitrogen, Argon)
• Dimensions (HWD): 182 x 155 x 77 mm (7.17 x 6.10 x 3.03 in)
• Weight : 782 g (1.72 lbs)
• Included : Mounting brackets and exhaust tube (1 m)
HCT Instruments INC. PO Box 3532 Myrtle Beach, SC 29578 T. 843-808-9224, Email. [email protected] www.hctinstruments.com
HCT - Technology Changing How We Live
HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
EPS-n (Electrical Particle Sizer with XRC-05)
EPS-n is an instrument which classifies a particle according to its electrical mobility. Electrical mobility of a particle is decided by fluid resistance for
ce and electrostatic force and can be converted to an equivalent particle diameter. The biggest advantage of EPS-n is that Soft X ray is used as the
neutralizer instead of radioactive sources. The Soft X ray charger is installed inside the EPS-n making it smaller and more portable than its previous
models.
The EPS-n is a rudimentary instrument that generates mono-disperse aerosols and measures particle size distributions with high durability and repe
atability.
HCT provides two type of DMA, depending on your preferred particle size range.
Benefits and Applications
Aerosol Generation System
• Fundamentals of aerosol research
• Monitoring outdoor and indoor air quality
• Filter Media Test for filter efficiency
• Particle formation or growth research
• Use for standard calibration tool of particle counter
SNPS
• Fundamentals of aerosol research
• Atmospheric environment research
• Research on semiconductor fabrication and material synthesis
SPECIFICATIONS
Maximum particle concentration : 107 particles/ ㎤
Particle size range
- Using DMA-20 : 7~ 830 nm
- Using DMA-05 : 2 ~ 160 nm
Flow rate :
- Aerosol : 0.1 ~ 1.5 L/min
- Sheath air : 1 ~ 15 L./min
Aerosol temperature range : 10 ~ 35°C
TDMA Test
Aerosol pressure range : 1 ± 0.1 ATM
Front panel display : 800 x 480 pixel
60000
Power : 100 ~ 240 VAC, 50/60 Hz, 1.0A
Dp = 20.28 s = 1.07
Dimensions (LWH): 260x375x350 mm ( 14.8 x 10.2 x 17.8 in)
Dp = 29.98 s = 1.06
50000
Dp = 50.92 s = 1.06
Dp = 80.79 s = 1.06
•
6C06001
Power Cable
•
6C05061
High voltage Cable
•
6C05063
BNC Cable
•
1801013
Impactor
•
1804000
DMA-05 (Optional)
•
1801000
DMA-20 (Optional)
dType/dLogDp
Parts Number
40000
Dp = 101.33 s = 1.06
30000
20000
10000
0
10
100
Particle diameter(nm)
HCT Instruments INC. 1229 38th Ave N MS – 161, Myrtle Beach, So Carolina 29577 Tel: 970-481-5721, Email. [email protected] www.hctinstruments.com
HCT - Technology Changing How We Live
HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
SNPS-n20 (Scanning Nano Particle Spectrometer with XRC-05)
SNPS-n20 is an instrument which can measure aerosol particles in the range from 7 to 830 nm in high resolution. SNPS-n20 consists of CPC and
EPS, and these two devices are connected through a tube with each other. Particles classified corresponding to its electrical mobility in the EPS are
introduced into the CPC, and then the particles are measured by the optical system in the CPC after condensational growth. Measured data is
transferred in real time to a computer using the Scanning Mobility Particle Spectrometer software. Raw data is converted to particle size distribution
through the inversion algorithm.
SNPS-n20 is suitable to measure airborne particle size distributions, so SNPS is highly recommended monitoring atmospheric aerosol in the
Meteorology. SNPS can be also used for measuring the size distribution of test aerosols in Inhalation toxicology test system or filter media test
system.
Applications
Benefits
• Indoor/outdoor air quality research
• Real-time nanoparticle size measurements : 75 sec (scan + retrace)
• Occupational hygiene/workplace exposure monitoring
• High resolution : 64 channels per decade
• Filter Media Test for filter efficiency
• Nano particle size up to submicron particle size : 7 nm ~830 nm
• Inhalation toxicology
• Meet ISO 15900 : 2009
• Fundamentals of aerosol research
• No radioactive materials
• Nanotechnology applications
• Built-in data logging
• Atmospheric environment research
• Size distributions down to 10 nanometers
SPECIFICATIONS
Maximum particle concentration : 107 particles/ ㎤
Maximum particle size resolution : 64 channel
Particle size range
- Using DMA-20 : 7~ 830 nm
- Using DMA-05 : 2 ~ 160 nm
Flowrate :
- Aerosol : 0.1 ~ 1.5 L/min
- Sheath air : 1 ~ 15 L./min
CPC Type : Water based CPC or N-Butyl CPC
Aerosol temperature range : 10 ~ 35°C
Aerosol pressure range : 1 ± 0.1 ATM
Communication : RS-232
Power : 100 ~ 240 VAC, 50/60 Hz, 1.0A
Parts Number
•
6C06001
Power Cable
•
6C05061
High voltage Cable
•
6C05063
BNC Cable
•
1801013
Impactor
•
1804000
DMA-05 (Optional)
•
1801000
DMA-20 (Optional)
•
7004014
CPC Extra Filter
•
7008001
Drain Bottle / Fill Bottle
•
1702002
HCT SNPS Software program
HCT Instruments INC. 1229 38th Ave N MS – 161, Myrtle Beach, So Carolina 29577 Tel: 970-481-5721, Email. [email protected] www.hctinstruments.com
HCT - Technology Changing How We Live
HCT.CO.,LTD 105-1, Jangamri Majangmyeon Ichensi Gyeonggido, 467-811. Republic of Korea
T. 82-31-6456365 Email. [email protected] www.hct.co.kr
www.particle-science.com
HCT-3710 (Mask Tester)
HCT has developed a mask tester ideal for respirator testing and perfect for complying with standards such as NIOSH and EN 143.
The multi-jet atomizer in the HCT-3710 is capable of generating a large amount of aerosol(120mg or 200mg) that can be easily adjusted by changing the
nozzle part having a different number of nozzles.
Feature & Benefits
• The dehumidifier in the HCT-3710 maintains a less than 60% relative humidity for the
generated aerosol.
• HCT-3710 also features the HCT Soft X-ray which acts as a neutralizer that does not
need special authorization to be used. It offers high performance efficiency for respirator
tests.
• The flow rate for the test can be automatically adjusted.
• The automatic flow control can maintain the set flow rate for the duration of the test
period providing a highly reliable mask performance review.
• An anti-vibration and soundproof chamber is provided with the HCT-3710 to be used
during high flow pump operations.
• The user can monitor the process in real time. Its dedicated software has a functional
graph tool suitable for data analysis and was designed to process large amounts of data.
• The test parameters can be adjusted by varying the level of Relative
Humidity and amount of aerosol challenge.
It can test various type of masks
by changing mask adaptor.
* Mask adaptor must be ordered separately. When you order
this product, we provide a basic type of mask adaptor.
HCT-3710 has been enhanced to insure your final products meet global standards.
Complied with En 143, NIOSH 42 CFR part 84.
Generate a large amount of aerosol.
Easy to use – smart software
No radioactive source
Low maintenance
▲ Display Environment data
▲ Display Chart & Data
Particle Generation
Particle detection
Particle type
Detection rate
Environment data
Features
Specifications
Particle Generator
Atomizer
Particle measurement system
Photometer
Sampling Flow rate
Bypass & 1.5 L/min
Sampling particle Dynamic range
0 ~ 400 μg/s
DOP Diameter (count median)
0.18 μm, ±0.2 μm
DOP Mass
17 mg/min
Display : Pressure, Temperature, Relative humidity, Flow rate
DOP Standard deviation
<1.7
Chamber On/Off
Paraffin diameter (count median)
0.18 μm, ±0.2 μm
Control start and stop
Paraffin mass
17 mg/min
Paraffin Standard deviation
<1.7
NaCl diameter (count median)
0.085 μm, ±10 nm
NaCl Mass
3.6 mg/min
NaCl Standard deviation
<1.86
Efficiency rate
30 ~ 99.999 %
Neutralizer
Soft X-ray charger
Flow rate
0 ~ 120 L/min
Differential pressure
0 ~ 620 Pa
Temperature
10 ~ 50 ℃
Humidity
20 ~ 60 %
Communication
USB to Serial
Power
100 ~ 240 VAC,
Dimension
1400 * 800 * 1080 (mm)
Weight
300 kg
▲ Main Display at Window
Aerosol type : NaCl, DOP, Paraffin
HCT Instruments INC. PO Box 3532 Myrtle Beach, SC 29578 T. 843-808-9224, Email. [email protected] www.hctinstruments.com