Multi Loose Tube Cable
ID:
LM00
PE0I
A-DQ(BN)2Y 8×1,7 max. 96F
This cable is suitable for outdoor use.
Black HDPE outer jacket, UV stable
(Other colours available on request)
Water blocking E-glass yarn
Gel filled loose tube with optical fibres
FRP dielectric central strength member (OD 3,0 mm)
Waterblocking yarn
Ripcord
Order example
2100 m A-DQ(BN)2Y 96E9/125 G.652D ja cket coulour BLK, cabl e s peci fi cati on PE0I
Fibre Type
Fibre colour coding
According to IEC 60304
1 Red
2 Green
3 Blue
4 Yellow
5 White
6 Grey
7
8
9
10
11
12
Brown
Violet
Turquoise
Black
Orange
Pink
Other fibre colour sequences available on request
Single mode fiber 9/125
Multi mode fiber 50/125
Multi mode fiber 62,5/125
See the Fibre Specification sheet
Sheat Marking
Print colour
Print method
Print legend
Tube colour coding
1 Red
2 Green
3-8 White
White
INK-Jet
manufacturer’s name, job number, type of
cable, length marking @ 1 m intervals
Other print legends available on request
in the case of lower number of fibres some tubes are replaced by uncoloured fillers
Other tubes colour sequences available on request
Packaging
Plywood
Standard put-up length
up to 8100 m *
* length toleration ± 5%
V případě zájmu o tuto kabeláž nás neváhejte kontaktovat.
ABBAS, a.s. | www.abbas.cz | Linka technické podpory +420 840 777 999
BRNO / Edisonova 5, 612 00 Brno / T +420 541 240 956 / M +420 602 777 999 / [email protected]
PRAHA / Nad strouhou 6, 147 00 Praha / T +420 221 416 811 / M +420 602 777 000 / [email protected]
OSTRAVA / Slévárenská 16, 709 00 Ostrava / T +420 596 611 984 / M +420 602 777 222 / [email protected]
Multi Loose Tube Cable
ID:
PE0I
A-DQ(BN)2Y 8×1,7 max. 96F
Mechanical and Environmental properties
Test
Cable outer diameter
Cable weight
Outer jacket thickness
Loose tube diameter
Value
Unit
Method
9,5 ± 0,4
86
1,5
1,7
mm
kg/km
mm
mm
EN 60811-1-1
- calculated
Max. tensile strength
4300
N
EN 60794-1-21-E1
Crush resistance test
3000
N
EN 60794-1-21-E3
Impact resistance test
20
Nm
EN 60794-1-21-E4
Min. bend radius (no load)
20
× OD
EN 60794-1-21-E11a
Min. bend radius (load)
15
× OD
EN 60794-1-21-E11b
Moisture resista nce test
Temperature range
Installation
Operation
Storage
Comment
pass
EN 60794-1-22-F5
-15 to +50°C
- 40 to +70°C
- 40 to +70°C
EN 60794-1-22-F1
- max. fiber strain 0,33%
- cable strain 0,7%
- 2300N no fiber strain
- max. attenuation variation ≤ 0,05 dB at 1550 nm
- no increase attenuation after the test
- plate dimensions 100×100 mm
- max. attenuation variation ≤ 0,05 dB at 1550 nm
- duration of loading 1 min.
- no increase attenuation after the test
- 3 Impact
- no fibre cracking
- max. attenuation variation ≤ 0,05 dB at 1550 nm
- no increase attenuation after the test
- max. attenuation variation ≤ 0,05 dB at 1550 nm
- no increase attenuation after the test
- water height 1 m
- sample length 3 m
- no leakage on free sample end
- duration of test 24h
- max. attenuation variation ≤ 0,1 dB at 1550 nm
- Dwell time acc. to EN 60794-1-22
- When installing or assembly under temperature bellow 5°C
cable has to be stock in temp of 20°C at least 24h before
installation.
- no increase attenuation after the test
Cable life time - minimum 30 years
V případě zájmu o tuto kabeláž nás neváhejte kontaktovat.
ABBAS, a.s. | www.abbas.cz | Linka technické podpory +420 840 777 999
BRNO / Edisonova 5, 612 00 Brno / T +420 541 240 956 / M +420 602 777 999 / [email protected]
PRAHA / Nad strouhou 6, 147 00 Praha / T +420 221 416 811 / M +420 602 777 000 / [email protected]
OSTRAVA / Slévárenská 16, 709 00 Ostrava / T +420 596 611 984 / M +420 602 777 222 / [email protected]