GATE FITTINGS
PROQ GRADE 316 STAINLESS STEEL FITTINGS
All these fittings are manufactured from Grade 316 stainless steel and are supplied in brushed finish. They are suitable for use in external situations and damp environments
where mild steel fittings would be prone to rusting. On the Continent they are used on houses and buildings in coastal locations. Please contact us for other similar products
and different sizes. Please note that fixings are not supplied with these products. Please note these products are particularly suited for use with accoya wood.
GRADE 316 HINGES
ENGLISH TEE HINGE
STRAP HINGE
SHUTTER HINGE
6mm knuckle. Brushed stainless steel
194415 150mm long 194120 200mm long 194125 250mm long 194130 300mm long 30x3mm section, 100x55mm plate
Brushed stainless steel
194340 400mm long
194350 500mm long
Brushed stainless steel
194420 65x207mm
190402 75x400mm
BAND HINGE
ANGLE STRAP HINGE
TEE STRAP HINGE
40x5mm section, 16mm diameter pin
Brushed stainless steel
193143 300mm long
193145 500mm long
193147 700mm long
193240 1000mm long
193242 1200mm long
250 x 370mm, 35 x 4mm section,
14mm diameter pin (LH or RH)
Brushed stainless steel
190514 LH 190518 RH 250x35mm upright
14mm dia pin, reversible
Brushed stainless steel
190614
GATE FITTINGS
Also available 300mm & 600mm
Also available 400, 600, 800, 1500mm
GRADE 316 HINGE PINS
192
HINGE PIN
HINGE PIN
HINGE PIN
Build in, 16mm dia pin
Brushed stainless steel
190116 Horizontal bolt on plate, 14mm dia pin (LH or RH),
138mm long. Brushed stainless steel
190104 RH
190108 LH Vertical plate to screw
Brushed stainless steel
190131 (14mm pin), 100x40mm 190136 (16mm pin), 180x40mm HINGE PIN
HINGE PIN
Drive fix, 16mm dia pin
Brushed stainless steel
191416 Rawlbolt fix M10, 16mm dia pin
Brushed stainless steel
191426
WWW.ZEROPLUS.CO.UK | TEL: +44 (0)1785 282910
All products usually available ex-stock except those marked with * Call for lead time
GATE FITTINGS
PROQ GRADE 316 STAINLESS STEEL FITTINGS
All these fittings are manufactured from Grade 316 stainless steel and are supplied in brushed finish. They are suitable for use in external situations and damp environments
where mild steel fittings would be prone to rusting. On the Continent they are used on houses and buildings in coastal locations. Please contact us for other similar products
and different sizes. Please note that fixings are not supplied with these products. Please note these products are particularly suited for use with accoya wood.
GRADE 316 BOLTS LOCKABLE WITH PADLOCK
PADLOCK BOLT WITH KEEP
HASP & STAPLE
Brushed stainless steel
194110 10mm dia shoot 65mm W x 60mm H (staple 20mm wide)
171x38mm
Brushed stainless steel
193171
194112 12mm dia shoot 80mm W x 67mm H (staple 22mm wide)
GATE FITTINGS
194114 14mm dia shoot 90mm W x 73mm H (staple 35mm wide)
GRADE 316 BOLTS
L
CRANKED HANDLE BOLT
LOOP HANDLE BOLT
AUTOMATIC GATE BOLT
90mm x 60mm plate
14mm dia shoot
Brushed stainless steel
194414 314mm long
14mm diameter shoot, length L = overall
Brushed stainless steel
192202 250mm long 192203 300mm long 192204 350mm long 192205 400mm long 270mm long, 30mm travel
Brushed stainless steel (Grade 304)
194090 TOWER BOLT WITH KEEP
CRANKED HANDLE BOLT
SLIDING BOLT
12mm diameter shoot
80 x 58mm plate
Brushed stainless steel
191212 14mm dia shoot, 43mm throw. 90x60mm plate,
with keep
Brushed stainless steel
191328
300mm long overall, 100mm x 50mm backplate
with guide and strike plate (also available 400mm
to special order)
Brushed stainless steel (Grade 304)
191721
NEW
GRADE 316 STOPS & HOLDERS
A
A
B
80
140
140
B
60
80
H
100
100
B
B
140
H
A
A
DOOR STOP AND HOLDER
GATE STOP
GATE STOP
Brushed stainless steel
190194 250mm high 190195 350mm high Screw fix, 140x80mm
Brushed stainless steel
198214 Build in lugs. Brushed stainless steel
190186 140x60x100mm
190188 140x80x100mm
This item will be discontinued when stock is exhausted
All products usually available ex-stock except those marked with * Call for lead time
TEL: +44 (0)1785 282910 | WWW.ZEROPLUS.CO.UK
193