BIM & TRA
The holistic view by Siemens
Unrestricted © Siemens Switzerland Ltd 2016
siemens.com/buildingtechnologies
BIM is everywhere
BIM is all over the press …
Unrestricted © Siemens Switzerland Ltd 2016
Page 2
25.07.2016
Building Technologies
Construction projects are faced with numerous challenges
Unbudgeted costs
Unreliable schedule
Insufficient quality
Environmental impact during construction
Accidents on construction sites
Planning errors
Inaccurate, incomplete plans
Lack of cooperation
Difficulty of interdisciplinary realization
Unrestricted © Siemens Switzerland Ltd 2016
Page 3
25.07.2016
Building Technologies
The manufacturing industry faced similar challenges –
how did it improve?
Productivity
per employee
200
Manufacturing industry
(without construction industry)
Overall
Services
100
Construction industry
1991
2001
2011
Source: Statistische Bundesamt, Fachserie 18, Reihe 1.5, 2013; Volkswirtschaftliche Gesamtrechnungen
Unrestricted © Siemens Switzerland Ltd 2016
Page 4
25.07.2016
Building Technologies
The success of the manufacturing industry is built on
the digitalization process – accompanied by Siemens
Unrestricted © Siemens Switzerland Ltd 2016
Page 5
25.07.2016
Building Technologies
These are the levers of success according to our experience
• holistic process optimization
Process
Quality
• reduction of interfaces
• eliminate double work
• consistant data
Time
Data
• enriched data (new dimensions)
• accessible data
Tools
• testing and model checking
(e.g. clash detection)
Costs
• simulation and analytics
(big data approach)
Unrestricted © Siemens Switzerland Ltd 2016
Page 6
25.07.2016
Building Technologies
If the construction industry omits typical planning errors,
the productivity will be similar to the one of the manufacturing industry
Productivity
per employee
Manufacturing industry
(without construction industry)
Construction industry
Source: Statistische Bundesamt, Fachserie 18, Reihe 1.5, 2013; Volkswirtschaftliche Gesamtrechnungen
Unrestricted © Siemens Switzerland Ltd 2016
Page 7
25.07.2016
Building Technologies
BIM is the synonym for digitalization in the construction industry
Digitalization
in the
construction
industry
BIM
Unrestricted © Siemens Switzerland Ltd 2016
Page 8
25.07.2016
Building Technologies
Siemens is a competent partner in all phases of the building life cycle
Unrestricted © Siemens Switzerland Ltd 2016
Page 9
25.07.2016
Building Technologies
BIM is all about data:
BIM knows different dimensions that help us to plan and operate buildings
The data model evolves over time…
2D
3D
4D
5D
6D
2D drawings
3D Model
Schedule
Costs
Building life cycle
information
(eLibrary)
XD
Unrestricted © Siemens Switzerland Ltd 2016
Page 10
25.07.2016
Building Technologies
BIM is all about data: Different levels of detail (LOD) give
us important information about the features of a building
LOD 100
LOD 200
LOD 300
LOD 400
LOD 500
LOD X00
Unrestricted © Siemens Switzerland Ltd 2016
Page 11
25.07.2016
Building Technologies
BIM is all about data:
The foundation for all 3D planning are object libraries
Relations
Object library
Attributes
Geometry
…
Classes
Interactions
…
Interdependency
Data sheets
3D planning
Digital twin
Unrestricted © Siemens Switzerland Ltd 2016
Page 12
25.07.2016
Building Technologies
BIM is all about data:
We offer the necessary object libraries
BIM-compliant data according to VDI 3805 / ISO 16757 and COBie standard is
available for more than 700 products
Unrestricted © Siemens Switzerland Ltd 2016
Page 13
25.07.2016
Building Technologies
How does BIM work?
Build
twice
Plan and
build together
Create data
only once
For the entire
life-cycle
Unrestricted © Siemens Switzerland Ltd 2016
Page 14
25.07.2016
Building Technologies
How does BIM change the construction process
Construction
Idea
Operation
Rebuild
Plan
Virtual
build
phase
Physical
construction
phase
Operation
BIM
Unrestricted © Siemens Switzerland Ltd 2016
Page 15
25.07.2016
Building Technologies
Overview and highlights
Step into the future of room automation without programming
Central functions for all disciplines
Room coordination functions
Room functions for lighting
Room functions for shading
Room functions for HVAC
Unrestricted © Siemens Switzerland Ltd 2016
Page 16
25.07.2016
Building Technologies
BIM influences the collaboration between the different trade
as well as the duration of the different phases
Today
Idea
Construction
Planning
Operation
Rebuild
Building Owner
Architect and consultant/general planner
General contractor
Electrical
Operator/facility manager
Mechanical
Service
Security, IT
Unrestricted © Siemens Switzerland Ltd 2016
Page 17
25.07.2016
Building Technologies
BIM influences the collaboration between the different trades
as well as the duration of the different phases
Tomorrow
Idea
Construction
Planning
Operation
Rebuild
Building Owner
Architect and consultant/general planner
General contractor
Electrical
Electrical Electrical
Operator/facility manager
Mechanical
Mechanical
Mechanical
Service
Security, IT
Planning
Security,
IT
Security,
IT
Execution
Unrestricted © Siemens Switzerland Ltd 2016
Page 18
25.07.2016
Building Technologies
Improve your performance
Energy efficiency with RoomOptiControl
HVAC
Color changes from
green to red when:
Light
Adjustment of
temperature setpoint
Brightness setting
Adjustment of
fan setpoint
Lights switched
on when there is
sufficient daylight
Change of room
operating mode
Blinds
Room coordination
Winter: Blinds lowered,
sunny day and heating
Extension of operating
times active
Summer: Blinds raised
and cooling
Configurable
Unrestricted © Siemens Switzerland Ltd 2016
Performance
Page 19
Programmable
25.07.2016
Flexibility
Cost reduction
Open
Building Technologies
BIM prevents information loss
BIM-enabled project
Typical construction project
Knowledge
Loss of
information
at interfaces
Project start
u
u
u
Idea
Planning
Construction
Handover
Operation
Loss of time
Additional cost
Inconsistencies
in quality
Timeline
Unrestricted © Siemens Switzerland Ltd 2016
Page 20
25.07.2016
Building Technologies
BIM facilitates coordination and reduces rework
Unrestricted © Siemens Switzerland Ltd 2016
Page 21
25.07.2016
Building Technologies
BIM increases productivity
Prefabrication
Unrestricted © Siemens Switzerland Ltd 2016
Page 22
25.07.2016
Building Technologies
BIM supports the entire life cycle
Digital twin
Physical construction
Operation
u
Asset tracking
u
Room management
u
Computer-aided
facility management
u
Computer-aided
maintenance
Rebuild
Unrestricted © Siemens Switzerland Ltd 2016
Page 23
25.07.2016
Building Technologies
Our BIM experience – we use BIM for our own construction projects
New headquarter of Building Technologies
Division in Zug, Switzerland
• Cooperation with Siemens Real Estate
and Building Technologies on new methods
à solution frontrunner
New Siemens Campus Erlangen,
Germany
• Modular approach based on BIM
• Long time project
• Large scale project with high repetition
factor of similar buildings and components
2016
2017
Unrestricted © Siemens Switzerland Ltd 2016
Page 24
25.07.2016
Building Technologies
What will improve with BIM
Earlier conflict
and error
detection
Improve
budget
reliability
____________________
______________
Up to
10% savings
Up to
Fewer
accidents
on job-sites
40%
in budget due to collision
management
decrease in non-budgeted
change-orders
Faster
project
delivery
Basis for
life cycle cost
optimization
Higher
building
quality
________________
________________
________________
Up to
7%
Up to
shortened project
timeline
9%
operation costs
lowered
Up to
3.5%
more efficient
occupancy
Source: CIFE, Center for Integrated Facility Engineering, Stanford University
Unrestricted © Siemens Switzerland Ltd 2016
Page 25
25.07.2016
Building Technologies
Government regulations are increasingly driving the adoption of BIM –
BIM implementation status – all countries are still in the race
US
(GSA)
2003
Norway
–
US
(USACE)
South
Korea
2007
2010
Finland
Denmark
Australia
UK
2011
2012
Singapore
China (2016)
Malaysia (2016)
UK (2016)
Brazil, Mexico
Switzerland
Japan
2013
2014
Germany, France
New Zealand
Hong Kong
2015
…
UAE
US
(NAVFAC)
• Countries with National Mandates or Polices by Agencies / Municipality
• Countries with BIM Guidelines / Handbooks
Major
Drivers
Government
Regional regulations drive BIM Adoption
Academic institutions
Research on BIM benefits
Pilot projects
Implementing BIM method
Source: McGraw Hill, The Business Value of BIM for Owners, 2014 / Markets&Markets: BIM Market, 2014
Unrestricted © Siemens Switzerland Ltd 2016
Page 26
25.07.2016
Building Technologies
But the speed of change is increasing
Unrestricted © Siemens Switzerland Ltd 2016
Page 27
25.07.2016
Building Technologies
BIM enables real collaboration – let’s work together!
BIM optimizes
collaboration
by connecting
people,
information
and processes.
Unrestricted © Siemens Switzerland Ltd 2016
Page 28
25.07.2016
Building Technologies
Thank you
Siemens Switzerland Ltd
Building Technologies Division
International Headquarters
Gubelstrasse 22
6301 Zug
Switzerland
Unrestricted © Siemens Switzerland Ltd 2016
Page 29
25.07.2016
Building Technologies