Nickel
1. ALLOY
AMW-TRADE NAME
ALLOY
SIMILAR
STANDARD
MATERIAL-NO.
DIN/UNS
NAME
BR-Ni99.6
Ni99.6
DIN 17740
2.4060
NR-Ni99.6
LC-Ni99.6
DIN 17740
2.4061
R-Ni99.2
Ni99.2
Nickel 200
DIN 17740/ASTM B 162
2.4066/N02200
NR-Ni99
LC-Ni99
Nickel 201
DIN 17740/ASTM B 162
2.4068/N02201
2. AVERAGE CHEMICAL COMPOSITION
(mass - %)
AMW-TRADE NAME
min.
Ni (+Co)
C
Cu
Fe
Mg
Mn
S
Si
Ti
0.08
0.15
0.25
0.15
0.35
0.005
0.15
0.10
0.02
0.15
0.25
0.15
0.35
0.005
0.15
0.10
0.10
0.25
0.40
0.15
0.35
0.005
0.25
0.10
0.02
0.25
0.40
0.15
0.35
0.005
0.25
0.10
99.6
BR-Ni99.6
max.
min.
99.6
NR-Ni99.6
max.
min.
99.2
R-Ni99.2
max.
min.
99.0
NR-Ni99
max.
Max. 1 % Cobalt is acceptable.
0.09
µW•m
min. 50
approx. 62
min. 55
approx. 71
approx. 85
min. 50
approx. 62
approx. 80
annealed
quarter hard
annealed
quarter hard
hard
annealed
quarter hard
three-quarter-hard
NR-Ni99.6
R-Ni99.2
NR-Ni99
ksi
Rm
min. 340
approx. 430
approx. 540
min. 370
approx. 490
approx. 590
min. 340
approx. 430
min. 370
approx. 490
approx. 590
MPa
TENSILE STRENGTH
7.2
%
min. 40
min. 15
min. 5
min. 40
min. 15
min. 2
min. 40
min. 15
min. 40
min. 15
min. 2
13
10-6/°C
20 °C TO 100 °C
ELONGATION
10-6/°F
68 TO 212 °F
THERM. EXPANSION COEFFICIENT
4. MECHANICAL PROPERTIES
54
W•cmil/ft
BR-Ni99.6
8.9
g/cm³
ELECTRICAL RESISTIVITY
AT 68 °F
AT 20 °C
min. 55
approx. 71
approx. 85
TEMPER
0.322
lb/in.³
DENSITY
annealed
quarter hard
hard
AMW-TRADE NAME
NR-Ni99
R-Ni99.2
NR-Ni99.6
BR-Ni99.6
AMW-TRADE NAME
3. PHYSICAL PROPERTIES
360
°C
max. 74
approx. 81
approx. 89
max. 74
approx. 81
approx. 93
min. 74
approx. 81
max. 74
approx. 81
approx. 93
HRB
max. 130
approx. 150
approx. 180
max. 130
approx. 150
approx. 200
max. 130
approx. 150
max. 130
approx. 150
approx. 200
HB
HARDNESS
ROCKWELL B
BRINELL
680
°F
CURIE - TEMPERATURE
> 0.15 to 0.20
> 0.20 to 0.35
> 0.35 to 0.50
> 0.50 to 1.00
> 1.00 to 1.50
> 1.50 to 2.20
> 2.20 to 3.00
> 0.006 to 0.008
> 0.008 to 0.014
> 0.014 to 0.020
> 0.020 to 0.039
> 0.039 to 0.059
> 0.059 to 0.087
> 0.087 to 0.118
> 200 to 300
> 7.87 to 11.81
Other width and tolerances on request.
> 100 to 200
> 3.94 to 7.87
mm
10 to 100
WIDTH
0.39 to 3.94
in.
WIDTH TOLERANCES
± 0.012
± 0.008
± 0.004
WIDTH
± 0.3
± 0.2
± 0.1
mm
0.10 to 1.00
THICKNESS
± 0.0020
± 0.0016
± 0.0012
± 0.0010
± 0.0008
± 0.0006
± 0.0004
± 0.0003
in.
0.39 to 3.94
in.
0.004 to 0.039
0.10 to 0.15
0.004 to 0.006
Other thickness and tolerances on request.
mm
in.
THICKNESS
THICKNESS TOLERANCES
± 0.020
± 0.012
± 0.008
± 0.5
± 0.3
± 0.2
mm
> 1.00 to 1.80
± 0.0020
± 0.0016
± 0.0012
± 0.0010
± 0.0008
± 0.0006
± 0.0006
± 0.0004
in.
> 3.94 to 7.87
THICKNESS
in.
> 0.039 to 0.071
± 0.050
± 0.040
± 0.030
± 0.025
± 0.020
± 0.015
± 0.010
± 0.008
mm
10 to 100
± 0.024
± 0.016
± 0.012
± 0.6
± 0.4
± 0.3
± 0.060
± 0.050
± 0.040
± 0.030
± 0.025
± 0.020
± 0.015
± 0.010
mm
> 200 to 300
± 0.031
± 0.024
± 0.020
± 0.8
± 0.6
± 0.5
mm
> 2.50 to 3.00
THICKNESS
WIDTH
in.
> 0.098 to 0.118
± 0.0024
± 0.0020
± 0.0016
± 0.0012
± 0.0010
± 0.0008
± 0.0006
± 0.0004
in.
> 7.87 to 11.81
mm
> 1.80 to 2.50
THICKNESS
± 0.050
± 0.040
± 0.030
± 0.025
± 0.020
± 0.015
± 0.015
± 0.010
mm
> 100 to 200
in.
> 0.071 to 0.098
WIDTH
5. DIMENSIONS AND TOLERANCES
0.40 to 2.00
0.016 to 0.079
0.40 to 2.00
WIDTH
1.97 to 11.81
0.39 to 11.81
in.
+ 10
mm
50 to 300
10/2009
Mike DiMartino
Nickel Strip Product Manager
Phone: 508.342.2246
Mobile: 401.626.6486
Fax: 508.342.2501
E-mail: [email protected]
For more information please contact:
Barbara Donnelly
Inside Sales
Phone: 508.342.2246
Fax: 508.342.2501
E-mail: [email protected]
Guarantees of specific characteristics or applications require special written agreement.
mm
500 to 3000
LENGTH
20 to 118
in.
6. PRODUCT FORM
10 to 300
mm
500 to 3000
LENGTH
All data contained in this document are for information purposes only.
Other properties can be engineered according to costumer specifications.
Other form on request.
0.016 to 0.079
Cut length
mm
+ 0.40
in.
20 to 118
0.10 to 3.00
THICKNESS
0.004 to 0.118
in.
Strip
FORM
Other tolerances on request.
mm
in.
THICKNESS
LENGTH TOLERANCES (CUT LENGTH)
mm
300/400/500
COIL - ID
11.81/15.75/19.69
in.
max. 41.3
max. 1050
mm
COIL - OD
in.