SX4® SIX-GOBO TRAY SPECIFICATIONS
Catalog # TS6220
SX4®Six-Gobo Tray
US Patent # 6,926,427
August 9, 2005
• Excellent choice for display, retail,
theatrical or special event applications
• Slides into SX4®Case mounted in ETC Source Four™
• Over 800 patterns available off the shelf
• Custom or any ‘M’ size pattern
• Can be DMX operated or used with built-in
preprogrammed sequences
Dimensions:
11
Height:
11 4 in. (28.5 cm.)
Deep:
3 in. (8.89 cm.)
Weight :
The SX4®Six-Gobo Tray is designed to fit into the SX4®
Case which is attached to an ETC Source Four™ fixed focus
ellipsoidal spotlight (see SX4®Case Specifications).
With SX4 Case: 9 lbs.,10 oz. (4.28 kgs.)
Finish:
Matte black paint
2 in.
(5 cm.)
3 in.
7.6 cm.
5
3 12 in.
(8.89 cm.)
BACK VIEW
BOTTOM
VIEW
15
9 16
in.
(25.2 cm.)
BOTTOM
BOTTOM VIEW
4
1
TSPS-20 Dual power supply will operate from 90 to 230 Volts and
can drive two units.
TSPS-80 GamSpin DMX power supply operates eight units 120 Volts.
TSPS-82 GamSpin DMX power supply operates eight units 220 Volts.
5
6
are as follows:
1
10 2 in.
(26.6 cm.)
2.5 in.
(6.35 cm.)
401091
www.gamonline.com
PROPERTY OF
GAMPRODUCTS, INC.
11 16 in.
(28.7 cm.)
Power supply is required in both stand alone and DMX operation.
DMX cable and power cables supplied by others. Power supply options
Page 1 of 2
3 lbs.,5 oz. (1.44 kgs.)
®
Item #
Description
TS6120
SX4® Six-Gobo Tray 120 Volt (With SX4®case)
TS6122
SX4® Six-Gobo Tray 230 Volt (With SX4®case)
TS6220
SX4® Six-Gobo Tray (no case)
Add FS to catalog number for shutters.
Ex: SX4® with 230 Volt Six-Gobo Tray .......... TS6142FS
© GAMPRODUCTS, INC. • 2/07
in. (28.7 cm.)
2
The SX4® has been used on Broadway, in operas, film and
television production, special events, retail store displays
and anywhere that a special lighting effect is required. It
is reliable and efficient with easy to use features including
built-in memory sequences that make the Six-Gobo Tray an
ideal choice for multi-image projections.
Width:
5
11 16 in.
(28.7 cm.)
FRONT VIEW
BOTTOM
VIEW
11 14 in.
(28.5 cm.)
SX4® SIX-GOBO TRAY SPECIFICATIONS
Catalog # TS6220
The Frame for the SX4®Six-Gobo Tray shall be manufactured from .063 inch (.16 cm.) aluminum to minimize
weight. The overall dimensions shall be 11-5/16 inches (28.7 cm.) wide at the bottom, 11-1/4 inches (28.5
cm.) high, and 3-1/2 inches (8.89 cm.) deep including the motor control box. The track belt driven by the motor shall rotate the six-gobo turret, positioning the glass or steel patterns (separate item) in the appropriate
alignment as selected. Six-gobo turret plate shall measure 8-1/2 inches (21.6 cm.) in diameter and be made
from .09 inch (.22 cm.) thick aluminum. Six gobo slots shall be provided, each three inches in diameter. Glass
or metal patterns shall be held in place by a spring loaded pressure and quick mounting rings that slide into
four guide posts. Precise optical sensing points shall be provided for positioning of the gobos. The turret plate
shall be secured to drive shaft with three Allen Head bolts. Optical sensor shall be positioned to read six-gobo
turret position. Long-life, low-voltage, cooling fan shall be attached to unit.
Power drive mounted to tray shall operate from the 24 Volt DC supplied by separate DMX controlled power
supply (see options below). Motor drive shall be a 24 Volt DC stepping motor with electronic circuitry. The
Motor drive shall be mounted in steel case and will include the electronics and four rotary position switches
for the 512 channel address and mode switch for option selection. Two 4-pin XLR connectors shall be panel
mounted, a 4-pin male input and 4-pin female output, for daisy chain applications. The Six-Gobo Tray can be
controlled using a DMX signal from conventional light boards or it can use its on-board program sequences with
various options selected by the mode switch. SX4® Six-Gobo Tray shall be manufactured by GAMPRODUCTS,
INC. Model No. TS-6240.
See catalog numbers below for options and separate SX4® Case specifications - required.
9 15 in. (25.2 cm.)
16
Pattern Slot
3
216
in.
5.55 cm.
Gate
6
5
Turret
8.5 in.
(21.6 cm.) O
3 in.
7.62 cm.
1
114 in.
(28.5 cm.)
4
1
10 12 in.
(26.6 cm.)
POWER DMX
MODE X100 X10
X1
401091
www.gamonline.com
2
2.5 in.
6.35 cm.
PROPERTY OF
GAMPRODUCTS, INC.
4-pin XLR
connectors
Motor Control Box
Fan
Fan
IN
OUT
4 channel setting switches
Fastening screws
Optical Locator Sensor
5 in. (28.7 cm.)
1116
1
FRONT VIEW
3 2 in.
(8.89 cm.)
BACK VIEW
1
Item #
Description
TS6120
SX4® Six-Gobo Tray 120 Volt (With SX4®case)
TS6122
SX4® Six-Gobo Tray 230 Volt (With SX4®case)
TS6220
SX4® Six-Gobo Tray (no case)
Add FS to catalog number for shutters.
Ex: SX4® with 230 Volt Six-Gobo Tray .......... TS6142FS
Power supply is required in both stand alone and DMX operation.
DMX cable and power cables by others. Power supply options are as follows:
TSPS-20 Dual power supply will operate from 90 to 230 Volts and
can drive two units.
TSPS-80 GamSpin DMX power supply operates eight units 120 Volts.
TSPS-82 GamSpin DMX power supply operates eight units 220 Volts.
© GAMPRODUCTS, INC. • 2/07
Page 2 of 2
2 2 in.
(6.35 cm.)
Fan
BOTTOM VIEW
5
6 5 in.
8
(16.82 cm.)
11 in.
16
(28.7 cm.)
Motor Control Box
2 in.
(5.08 cm.)