MRI Products
#CK-2001M
#CK-2002M
#CK-2004M
#CK-2003M
SPECIFICATIONS
Accuracy: ±3% of Full Scale
Supply Pressure: 30-75 psi
O2 Percentage: 21-100%
MODEL
PORTS
FLOW RANGE
PORT “A”
15-120 LPM
(No bleed)
FLOW RANGE
PORT “B”
N/A
FLOW RANGE
PORT “C”
2-108 LPM
(10-12 lpm bleed)
#CK-2001M
A,C
#CK-2002M
A
15-120 LPM
(No bleed)
N/A
N/A
#CK-2003M
B,C
N/A
3-30 LPM
(No bleed)
0-30 LPM
(3 lpm bleed)
#CK-2004M
A,B,C
15-120 LPM
(No bleed)
15-120 LPM
(No bleed)
2-108 LPM
(10-12 bleed)
#CK-1001M
#CK-1002M
#CK-1003M
#CK-1004M
#CK-10605HM
#CK-1061M
MRI
MRI
MRI
MRI
MRI
MRI
Regulator for E Cylinder oxygen
Regulator for E Cylinder air
E Cylinder oxygen (Aluminum) w/single port
E Cylinder air (Aluminum) w/single port
Stand - 5 legged heavy duty
Brackets for (2) cylinders - 1 set heavy duty
#CK-1001M
Unique DISS Input Fitting Allows switching between gas sources without
disrupting the gas supply to the ventilator. Allows tanks to be changed out while
connected to the wall source (in the event the tank is depleted during transport.)
SIZE/WEIGHT
3.5 x 3.4 x 3.6”
8.9 x 8.6 x 9.2 cm
2-3/4 lbs (1.25 kg)
3.5 x 3.4 x 3.6”
8.9 x 8.6 x 9.2 cm
2-3/4 lbs (1.25 kg)
3.5 x 3.4 x 3.6”
8.9 x 8.6 x 9.2 cm
2-3/4 lbs (1.25 kg)
3.5 x 3.4 x 3.6”
8.9 x 8.6 x 9.2 cm
2-3/4 lbs (1.25 kg)
#CK-1002M
#CK-1061M
Ideal for Transport
Built-in Pressure Gauge Not exposed to possible damage.
Built-in 0-15 LPM Flow Meter (O2 regulator only) Provides emergent access
to oxygen flow if needed for a manual resuscitator bag.
Built-in Permanent O-ring Tank Washer No need to search for lost washers.
Ordering Information:
Deluxe O2 MRI Regulator- #CK-1005M
Deluxe Air MRI Regulator- #CK-1006M
MRI Compatible
Preset to 50 PSI (344.7 kPa)
MERCURY MEDICAL®
Page 264
(800) 835-MMED (727) 573-0088
FAX (800) 990-6375
MRI Products
Non-Magnetic Carts & Racks
These all stainless highly durable carts and mounts are painted white and have been tested inside a Phillips 1.5 Tesla Magnet
(MRI unit in a major California hospital) with no attraction or disturbance to the coil.
#66-6105-MRI
#66-6205-MRI
#66-6110-MRI
Height: 41” Depth: 10”
Width: 12” Weight: 6 lbs.
Wheel Dia: 6” Semi Pneu.
HOLDS 1 (D/E) CYL.
Height: 41” Depth: 10”
Width: 14” Weight: 8 lbs.
Wheel Dia: 6” Semi Pneu.
HOLDS 2 (D/E) CYL’S
Height: 46” Depth: 15”
Width: 15” Weight: 23 lbs.
Wheel Dia:10” Semi Pneu.
HOLDS 1 (H or T) CYL.
#66-6108-MRI
#66-610WM-MRI
Height: 40” Depth: 12”
Height: 14” Depth: 5”
Width: 13” Weight: 12 lbs. Width: 5” Weight: 4 lbs.
Wheel Dia: 8” Solid Rubber HOLDS 1 (D/E) CYL.
HOLDS 1 (M or M60)
MODEL #1153-7792MR FIVE LEG IV STANDS feature a stainless-steel post that sits on a 24” diameter,
polished die-cast aluminum base with wall-saver end caps to protect against scuffmarks. All five-leg IV poles offer
a two- or four- hook interchangeable ram’s horn. Stands travel on two-inch MR-Safe swivel casters. Optional
#1153-1381MR PUSH HANDLE is available as shown below.
Part #
Type of Hooks Height Adj. Casters Ship Wt (lb)
#1153-7792MR-C
Twist lock 2
74”-110”
2”
35
#1153-7792MR-4C
Twist lock 4
74”-110”
2”
35
#34-NMR-870-P
#34-NMR-870-15FM
M.R.I. Compatible
Preset Regulator
Small Oxygen Cylinder
M.R.I. Compatible
Flowmeter/Regulator
Small Oxygen Cylinder 0-15 LPM
#19-00-199 MRI
Manometer, M.R.I. Compatible
Constructed of brass and synthetics to
allow use in the powerful M.R.I.
environment. No ferrous components.
#34-FMR-100
M.R.I. Compatible Oxygen
Flowmeter
0 - 15 LPM w/o
fitting, 1/8 female inlet
#34-FMR-103
MRI Compatible Oxygen
Flowmeter 0 - 15 LPM,
D.I.S.S Female Hex Inlet
fitting
MERCURY MEDICAL®
Non-Magnetic Regulators
#BW-0781-3003
#BW-0781-3024
Page 265
NMP 50LY, Preset 50PSIG, CGA-870
NMG 15LY, 2-15 LPM, CGA-870 Yoke
(800) 835-MMED (727) 573-0088
FAX (800) 990-6375
MRI Products
The Series D MRI Compatible Ventilator
Tough environments demand tough equipment.
The Omni-Vent Series-D Ventilator has no equal.
It is MRI compatible and unaffected by electronic
interference. You can use the Omni-Vent
Ventilator with complete confidence. Every unit
exceeds the requirements of tough military
specifications which include drop testing, hot and
cold weather tolerance, and high vibration testing.
In addition, each unit is repeatedly subjected to a
variety of tests during manufacturing.
Omni-Vent Series D/TAU Monitoring System
#GR-D8TAU
The Series D/TAU MRI Compatible Ventilator
The Omni-Vent Series-D with built-in TAU Monitoring System and digital display gives you a complete system for
ventilating and monitoring adult, pediatric and neonatal patients.
Pneumatically powered, it is a single circuit, volume constant, time cycled and inspiratory flow variable ventilator
that also monitors:
• Respiratory rate
• I:E ratio
• Inspiratory and expiratory
time
• Inspiratory pressure
• Mean airway pressure
• Negative inspiratory force
• High pressure, low pressure and
failure to cycle modes (all employ
default parameters that can be reset).
SPECIFICATIONS
Power:
Medical air/Oxygen 25psi to 140psi
Rate:
1 to 150 BPM
Inspiratory time range 0.2 to 3.0 seconds
Expiratory time range 0.2 to 60 seconds
Volume:
0 - 1.5L (volume can be limited)
Flow Rate:
0 - 80 lpm
I:E Ratio:
Continuously adjustable to Inverse I:E
Ordering Information
#GR-OT-1021 IMV Kit
#GR-OT-1027 Operator’s Manual
#GR-OT-1023 Service Manual
Dimensions:
#GR-OT-2010 Reusable Patient Circuit
Series D
Series D/TAU
4” x 5” x 7”
13” x 7.5” x 6.5”
Series D
Series D/TAU
4.5 lbs.
8 lbs.
Weight:
MERCURY MEDICAL®
Page 266
(800) 835-MMED (727) 573-0088
FAX (800) 990-6375
MRI Products
RespirTech PRO™ is a gas-powered, inexpensive, short
term, emergency transport ventilator from VORTRAN
Medical Technology 1. It is MRI compatible and is
packaged in a kit with all the connecting tubing necessary
for easy set up:
•
•
•
•
#64-2120
RespirTech PRO™ with manometer
20’ length of O2 supply tubing
5’ length of 22mm corrugated tubing
3” length flex tubing for airway connection
6/Box
MAXO2Vent™
The MAXO2Vent™ is pneumatically powered, single
circuit, volume consistent time cycled and inspiratory
flow variable.
• Ideal for simple mechanical ventilation needs in:
Air/mobile
Special procedures
In-hospital transfers
Disease control
E.R.
Ambulance
Anesthesia
• MRI compatible
• Originally designed for military use
• Gas consumption is patient minute volume only
(no wasted gas to power the unit)
#HO-R213P19
MERCURY MEDICAL®
Page 267
(800) 835-MMED (727) 573-0088
FAX (800) 990-6375