130 H7 Fit 1.3
Chamfer .50X45
Customer Interface
(See Note 3)
6 Dowel Pin.
49.1
Sensing Reference
Frame Origin
46.6
70±0.0025
-Y
22.50°
Date
07
Eco 9037: Delete overload pins
JW
10/11/2011
100 B.C.
+X
40 H7 9.8
Chamfer 1.27X45
Customer Interface
50±0.025
129
155
-Z
+Y
Initiator
4X Tap M12 x 1.75 11.5
Equally Spaced
Customer Interface
(See Note 3)
7
8X Tap M6X1.0
Equally Spaced
Customer Interface
EXPOSED CIRCUITRY
IN THIS AREA
DO NOT TOUCH
Description
10 Slip Fit 12
Customer Interface
(See Note 3)
12 Max
+X
Rev.
+Z
+Y
-Y
45°
18.5
29.5
140 B.C.
Tool Adapter Plate
-X
-X
SIDE VIEW
3.8
Sensing Reference
Frame Origin
TOOL SIDE
MOUNTING SIDE
Right Angle
Connector
ISOMETRIC VIEW
1031 Goodworth Drive, Apex, NC 27539, USA
Tel: +1.919.772.0115 Email: [email protected]
Fax: +1.919.772.8259 www.ati-ia.com
ISO 9001 Registered Company
NOTES: UNLESS OTHERWISE
SPECIFIED.
Notes:
1. Material: Hardened Stainless Steel.
2. Do not touch internal electronics or instrumentation. This could
damage the transducer and will void the warranty.
3. DO NOT EXCEED INTERFACE DEPTH, MAY CAUSE DAMAGE.
4. For best accuracy, the transducer must be mounted to a surface rigid
enough to support loads without deflection.
DO NOT SCALE DRAWING.
ALL DIMENSIONS ARE IN
MILLIMETERS.
PROPERTY OF ATI INDUSTRIAL AUTOMATION, INC. NOT TO BE REPRODUCED IN ANY
MANNER EXCEPT ON ORDER OR WITH PRIOR WRITTEN AUTHORIZATION OF ATI.
DRAWN BY:
CHECKED BY:
3rd ANGLE PROJECTION
PROJECT #
B. Digeso 3/3/00
D. Norton 7/15/05
-
SHEET 1 OF 1
TITLE
Theta Transducer without Mounting Adapter Plate
SCALE
SIZE
DRAWING NUMBER
1:2
B
9230-05-1104
REVISION
07