Automated Microorganism Identification Device
New Technology - Accurate - Fast - Cost Effective
OptiDet® technology is based on
absorption spectroscopy combined
with a proprietary device design,
optical removable or disposable cell,
and classification algorithms.
It enables the identification of small
quantities of microbes (1-3 CFU) from a
primary culture dish, within a couple of
minutes. OptiDet® devices comprised
of two parts: (a) the main unit which
performs the measurement and analysis
and is the size of a table top printer;
and (b) a disposable optical cell which
accommodates the sample and is the size
of a stethoscope chest piece.
Identification
of gram
negative and
gram positive
bacteria within
3-minutes !
1
Technology :
Steps 1&2 are standard procedures.
Steps 3,4,5: OptiDet® technology!
2
5
Bacterial identification:
1. Samples are collected from patients and sent to the clinical laboratory.
2. The laboratory technician plates the sample on a primary,
non specific, petri dish for 18 - 24 hours.
3. Technician picks up one colony from dish and smears it on a disposable unit.
4. The unit is inserted to a stationary system.
Sample result found
4
5. Result of a specific bacteria appears on the screen in 1-3 minutes.
3
Automated Microorganism Identification Device
Disposable
Automated Microorganism Identification Device
Upgrade Your Laboratory
No more Standard Methods in Microbial Identification !
Adaltis laboratory device - Faster, Better, Cheaper
To operate the OptiDet® it’s easy !
The technology solution for Small and Mid-size Labs
n
n
n
n
n
n
n
Please turn on its power switch located at the rear panel.
Open the sterility pack and place the disposable on the working surface, with its mirror facing up.
Remove the sterile swab from its tube and collect a primary colony from the primary agar dish.
Smear the swab content evenly on the disposable unit using confluent strokes.
Open the removable handle and place the disposable into the removable compartment.
Place the handle back into the device and touch the “identify “icon that appears on the screen.
Wait for the microbial ID to appear on the screen. Time to result is 1-3 minutes.
Result
WWW.ADALTIS.NET
OptiDet® accurately detects the twelve most common pathogens.
Acinetobacter Baumannii
Enterobacter Aerogenes
Enterococcus Faecalis
n
n
n
Enterococcus Faecium
Enterobacter
n
n
Escherichia Coli
n
n
n
n
Klebsialla Pneumoniae
Pseudomonas Aeruginosa
Proteus Mirabilis
n
Staphylococcus Aureus
n
Staphyloccocus Epidermidis
n
Streptococcus Pyogenes
... more to come
[email protected]
For more information
The technology can be used for other applications such as detection
of bacteria directly from wounds and burns and can be also used for
agricultural and homeland security applications.
a The device classifies correctly the microorganisms with over 90%
specificity and sensitivity compared to today’s culture methods.
WWW.ADALTIS.NET
Customer Care Center:
e-mail: [email protected]
Sales and Marketing Office
e-mail: [email protected]
Technical Assistance:
e-mail: [email protected]
Order handling and Logistics
e-mail: [email protected]
Legal Registered Office
Via Durini, 27
20122 Milano, Italy
Adaltis S.r.l. Headquarter
Production and
Development Plant
a The device will be able to identify
All bacteria and yeasts in the clinical laboratory.
a
a
a
a
No need for gram stains.
No need for specific culturing.
No reagents are needed.
Reduced culture preparation time - saves up to 48 hours
Tel: + 39 0774 5791
of additional bacteria growth in a medium.
Fax. + 39 0774 353085
© Nov. 2015 Ref. BRO1015 V1.2
ADALTIS S.r.l. All rights reserved. All trademarks are property of their respective owners. Specifications are subject to change without prior notice.
Via Luigi Einaudi 7
Guidonia di Montecelio
00012 Rome, Italy
ADALTIS is certified in compliance with ISO9001 and ISO 13485.
Our products are CE-IVD.