bucket winch
machines
Cleans and maintains
drains, pipes, sewers
and culverts.
PMW
Visit www.iandickie.co.za to view our full range of products
Measuring Success by Customer Satisfaction
bucket winch
machines
Introduction
The Ian Dickie Hydraulic Powered Bucket Winch Machines clean
storm water and sewage pipelines of large amounts of sand and
debris using buckets and brushes without by-passing the water flow.
The sturdy all metal structures are specifically built to withstand
arduous conditions
Ian Dickie initially imported Hydraulic Drain & Culvert Winches, or
“Bucket Machines” into Africa over 50 years ago and have manufactured
them locally for over 30 years. The Drain & Culvert Machines provide
a positive mechanical method of cleaning sewers from manhole to
manhole. Two men with one set of machines are all that is required to
perform an effective cleaning operation.
ME201 PMW Standard Upright
Ian Dickie ME201 PMW Standard Upright
Designed to be utilised in conjunction with another Standard Upright
or a Truck Loader. Diesel Powered - Fully Hydrostatic - Centrally mounted
control valve.
Ian Dickie ME310 Portable Winch
Designed to be utilised in conjunction with another Portable Winch.
Hydraulically Powered via Powerpack Unit.
ME310 Portable Winch & Power Pack
Accessories
Surface Hung Rollers and Yoke Assembly –
Available in 200, 300 and 375mm sizes. All use 50mm I.D. standard steel pipe. Extra wide flange
to accommodate larger buckets. The pull strain is at 45 degrees to prevent strain on the pipe
threads.
Surface Hung Platform with Chain Vice –
The platform is positioned under the legs of the winch machine, the pipe supporting the roller can
be rotated to any desired degree.For both of the above, the extension pipe has to be supplied by
the operating team.
Roller Manhole Jacks –
Ideal for raised manholes. In offset manholes it can be used in conjunction with the surface
manhole roller to guide buckets. Not recommended as a substitute for surface manhole roller.
From 150mm – 550mm.
Heavy Duty Buckets –
An essential tool for pipe cleaning. The clamshell bucket remains open when drawn into a pipe and
closes when being withdrawn. Fitted runner bars on outside periphery assist in surmounting joints,
misplaced pipes etc. When used in conjunction with swivel links, the bucket twists in the pipe,
thereby assisting entry and withdrawal operations. Available from 150mm to 600mm.
Cable Swivel –
Cable swivels should always be used when pulling cable under tension. The swivel relieves the natural
twist and prevents kinking.
Porcupines –
To remove sand or silt use water from a firehose and work with the flow. Bristles churn deposits
and jetting water washes them down the line. Grease and small roots can also be removed with
the Porcupine. As a finishing tool: The Porcupine is made to the exact I.D. so that it will clean the
pipe to original capacity. Other cleaning tools such as buckets are undersized so that by using them
for the heavy work, and following with a Porcupine you do a thorough cleaning job.
w w w . i a n d i c k i e . c o . z a
bucket winch
machines
Specifications
ME201 PMW STANDARD MINI UPRIGHT
Detail
Description
Engine
Kohler KD477-2 Diesel
Power
12kW
Cylinders
2
Cooling
Air cooled
Starting
12v Electric
With battery in lockable box
Hydraulics
Hydraulic pump through closed loop
hydraulic system with pressure
relief valve.
One lever operation
Hydraulic tank sealed
against contamination
and fitted with fine mesh
filter and level gauge
Chassis
Heavy duty channel iron &
“I” beam construction.
Removable chevron
board and lights.
Tool Box
Set of basic maintenance tools
Lockable metal tool box
Axles
Single braked axle with leaf spring
Wheels
600 x 14 - 8 Ply x 2
Support Legs
Fully adjustable rack & pinion
type stabilizer legs
Tow Hitch
Pin or ball type
Brakes
Overrun and park brakes
Roller
Upper 200mm boom cable sheave roller
Jockey Wheel
Heavy duty retractable military type
Cable Drum
200m x 13mm steel cable capacity
drum with 100m x 13mm cable and
Crosby fittings
Cable
6 x 19 galvanised steel wire rope with
fibre core to EN12385/4/2002
Bucket Capacity
150 - 375mm (Maximum)
Dimensions:
L: 2300mm x W:1400mm x H: 2600mm
Weight
1100 kg
w w w . i a n d i c k i e . c o . z a
Remarks
Fully hydraulic with
duplex sprocket & chain
(3/4” pitch) reduction
bucket winch
machines
Specifications
ME310 PORTABLE BUCKET WINCH AND HYDRAULIC POWER PACK
Detail
Description
Remarks
Engine
Yanmar L48N-D Diesel
Hydraulic Power Pack
Power
3.5kW
Cylinders
1
Cooling
Air cooled
Starting
Recoil Hand Start
Hydraulics
Hydraulic pump with control valve to
drive the hydraulic motor on the winch.
One lever operation (Progressive)
Chassis
Hydraulic Power Pack
All steel 38 x 38 square frame with
lifting handles
Chassis
Portable Bucket Winch
All steel heavy duty channel and
round tube
Tool Box
Set of basic maintenance tools
Support Legs
4 x height adjustable with lifting
handles
Cable Drum
150mm x 8mm steel cable capacity
drum with 120m x 8mm cable and.
Crosby fittings
Cable
6 x 19 galvanised steel wire rope with
fibre core to EN12385/4/2002
Bucket Capacity
150 - 200mm (Maximum)
HYDRAULIC POWER PACK
Dimensions:
L: 1200mm x W: 850mm x H: 750mm
Weight
105 kg
PORTABLE BUCKET WINCH
Dimensions:
L: 1500mm x W: 850mm x H: 1100mm
Weight
150 kg
w w w . i a n d i c k i e . c o . z a
Hydraulic tank sealed
against contamination
and fitted with fine mesh
filter and level gauge
Lockable metal tool box
Hydraulic, with
sprocket & chain
reduction