Edgewater Machine Company, Inc. The Emco Large Capacity Rewind Machines Center Wind Machine The Emco Center Wind Machine (shown at right) can be used for rewinding borders after they are quilted and cut to size, and for rewinding large capacity rolls of finished quilting. The machine works by driving a grip roller in the center of the roll. The rolls are wound tightly and evenly. A quick disconnect allows one person to remove the roll from the machine and drop it onto a cart or dolly for removal of the roll to storage. The torque governing control allows for constant tension on the roll regardless of diameter size. Rolls can be wound as large as 60 inches in diameter. A simple interface connection will synchronize this machine with the quilting machine for automatic operation. Timming / Slitting knives can be added as an option for cutting borders or slitting panels right on the windup machine. Surface Winder The Emco Surface Winder (shown at left) will rewind finished goods into large capacity rolls up to 60 inches in diameter. The operator can quickly release a pair of hooks and the roll will drop onto a cart or dolly for transport. This machine winds the goods on their outer surface by revolving the roll on a pair of large rollers. The roll is wound tightly and evenly with constant tension controlled by the torque governing motor controller. A two wire interface connects this machine to a quilting machine for synchronous operations. Timming / Slitting knives can be added as an option for cutting borders or slitting panels right on the windup machine. Edgewater Machine Company, Inc. 13-20 131st Street College Point, New York 11356 U.S.A Phone: 718-539-8200 Fax: 718-358-4648 Email: [email protected] Website: www.edgewatermachine.com Edgewater Machine Company, Inc. The Emco Large Capacity Rewind Machines Emco Center Winder with Trimming Attachment The Emco Center Wind Machine complete with Trimming Attachment (shown at right) can be used to trim the edges of panels, slice the panels in half or for cutting borders. The winder will then rewind the finished goods tightly on a center cardboard tube into rolls as large as 60 inches in diameter by use of Emco’s exclusive grip roller. The Emco Trimming Attachment comes with three high speed steel circular knives, three combination cloth guides and guards, the Emco custom knife sharpener and a set of tools. A supplied simple interface connection will synchronize this machine with the quilting machine for automatic operation. Emco Surface Winder with Trimming Attachment The Emco Surface Winder Machine complete with Trimming Attachment (shown at left) can be used to trim the edges of panels, slice the panels in half or for cutting borders. The winder will then rewind the finished goods into rolls as large as 60 inches in diameter. The finished quilting is wound evenly on two large rollers with constant tension controlled by a torque governing motor controller. The Emco Trimming Attachment comes with three high speed steel circular knives, three combination cloth guides and guards, the Emco custom knife sharpener and a set of tools. A supplied simple interface connection will synchronize this machine with the quilting machine for automatic operation. Edgewater Machine Company, Inc. 13-20 131st Street College Point, New York 11356 U.S.A Phone: 718-539-8200 Fax: 718-358-4648 Email: [email protected] Website: www.edgewatermachine.com
© Copyright 2026 Paperzz