ProMetric® Production Test Sequencer
PM-PTS™ System
Applications
• Production testing of front and
rear projection displays • Production testing of FPDs,
including LCD, plasma, and LED
• Testing of OLED displays
Benefits
• Comprehensive library of uniformity
and contrast tests, and defect
detection functions simplifies quality
testing and control
• Test automation reduces production
costs and product returns
• Modular software simplifies
integration into manufacturing
process flow
• Flexible design for user control and
integration of user-defined tests
• Start fast with world-class training
and technical support
Comprehensive, modular testing system for
display production testing
Radiant Zemax’ PM-PTS™ (Production Test Sequencer) system is a complete
turnkey solution for comprehensive QC/QA testing and calibration for multiple
display technologies, including front and rear projection systems, LCD and
plasma FPDs, CRTs, and FEDs. With extensive test definition capabilities and
high-speed operation, PM-PTS™ reduces manufacturing and testing costs while
increasing production throughput for display manufacturers.
The PM-PTS™ system automates the entire test sequence, including the display
of test patterns on the device under test, imaging them with a PM-Series™
Imaging Colorimeter, and then analyzing and presenting the measurement
results relative to user defined pass/fail criteria.
PM-PTS™ simplifies test set-up with sophisticated software auto-alignment for
the display under test and automated Moire removal. This eliminates the need for
precise hardware fixturing and increases the accuracy of the PM-PTS™ tests.
PM-PTS™ supports multiple software application modules that allow testing of display brightness, brightness uniformity, contrast ratio (sequential black and
white, and checkerboard), color, color uniformity, gamma, distortion, focus, gray
scale and convergence. PM-PTS™ also detects and identifies display point and
line defects, Mura defects (blemishes), and quantifies individual Mura and overall
display performance on a JND (Just Noticeable Difference) scale. PM-PTS™ also
allows integration of user-defined and generated tests.
PM-PTS™ is highly flexible for use in any production application. It can be
operated in both Administrator and Operator modes to control changes to
test parameters and criteria. PM-PTS™ can be controlled via an API or serial
command interface for integration with other production systems.
PM-PTS™ can be used with any Radiant Zemax PM-Series™ Imaging Colorimeter,
so multiple options are available to achieve the pixel resolution, dynamic range,
and cost required for any application.
Radiant Zemax LLC
22908 NE Alder Crest Drive, Suite 100
Redmond, WA 98053, USA
Sales and marketing: sales@ radiantzemax.com
Technical support: support@ radiantzemax.com
Web site: RadiantZemax.com
T: +1 425 844-0152
F: +1 425 844-0153
Copyright © 2012 Radiant Zemax LLC,
All Rights Reserved
Production Test Sequencer
PM-PTS™
Key Features
• User controlled test sequence and pass/fail criteria definitions
• Modular software test collections allowing application to quality
test and defect detection for multiple display technologies
• Defect identification, ranking, and classification
• Defect merging to group defects
• Automated Moire pattern removal
Specifications*
PM-PTS™ Modules
PM-PTS-QT™
Quality test module, tests include: luminance and color uniformity;
contrast; convergence; distortion; and more
PM-PTS-DT™
Defect test module, identifies: blemishes; block, line and pixel
defects; imaging sticking; noise; and more
PM-PTS-TM™
TrueMURA™ test module, provides: JND analysis of mura; blob
analysis; and dark border test
PM-PTS-DMB™
Display Color Balancing module for projection display
PM-PTS-GC™
Display Gamma Correction module
PM-PTS-ODP™
OLED panel testing software, including defect detection
ProMetric® Imaging Colorimeters
Multiple options for pixel resolution, dynamic range, working
distance and field-of-view
Support
Installation and training
Technical support hot-line
2 year warranty for imaging colorimeter
System Requirements
• Windows® 7, Vista or XP
• 2.0 GHz or faster processor
• 3GB or greater RAM
• SXGA or larger monitor
• Ethernet port
* Specifications subject to change without notice
• USB 2.0 interface
Radiant Zemax LLC
22908 NE Alder Crest Drive, Suite 100
Redmond, WA 98053, USA
Sales and marketing: sales@ radiantzemax.com
Technical support: support@ radiantzemax.com
Web site: RadiantZemax.com
T: +1 425 844-0152
F: +1 425 844-0153
Copyright © 2012 Radiant Zemax LLC,
All Rights Reserved