3 FOLD
TO PLAY (A)
MORE WAYS TO PLAY
TO PLAY (B)
1.
2. Lower into dunk tank to change color.
1.
2.
a
INSTRUCTIONS
3. If shark captures car...
b
CITY
Car transforms to
cold water color.
Car transforms to
cold water color.
3. Lift and release onto track.
SHARKPORT SHOWDOWN
5.
4. Send additional car to the rescue!
™
CONNECT TO OTHER HOT WHEELS® SETS
(SOLD SEPARATELY).
4. Speed by the shark to change color in the pool.
PERFORMANCE TIPS
Car transforms to
cold water color.
6. Hit lever to release captured car!
7.
0
Q. The car lift keeps jamming. Can it move more
smoothly?
A. Hold the set down with your other hand and the
car lift will move up and down smoothly.
SIDE VIEW
Q. My car keeps slowing down by itself on the
tracks.
A. Lint may collect around your car’s axles. This
may cause the car to run slowly. Use tweezers
or a toothpick to remove lint.
Cartransforms
transforms
Car
to to
warmwater
water
color.
warm
color.
Car transforms to
warm water color.
• Color change will last longer if you do not expose this toy to intense heat or direct sunlight for
prolonged periods of time.
• Drain, rinse, clean and dry all items thoroughly before storing. Do not immerse set in water.
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower,
World Finance Centre, Harbour City, Tsimshatsui, HK, China.Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5,
13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:03-78803817, Fax:03-78803867.
NOT FOR USE WITH SOME HOT WHEELS® VEHICLES.
6
4+
Not for children under 3 years.
1
ASSEMBLY
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
GET READY TO PLAY
2.
1.
x3
Press lever to expose the
round tab and connect it
to the shark as shown.
6.
7.
• Fill water to top of container for best
performance.
• Overfilling of reservoir may cause leakage.
• To avoid burns do not use water that is too hot,
above 120˚F/48˚C.
• Water toys sometimes get messy. Protect play
surfaces before use.
• For best performance of color change feature,
please use icy water under 50˚F/10˚C.
SIDE VIEW
3.
2
1
4
Align the letters
as shown.
a
A
3
Icy water
Under 50˚F/10˚C
4.
A
LABEL SHEET
5
8.
9.
© 2013 Mattel
BGK04-0310
7
5
8
10
9
APPLY LABELS
8
b
Warm water
86˚F/30˚C-104˚F/40˚C
6
Helpful Hint: Apply labels before assembly by number as indicated.
5
4
9
1
2
c
5.
3
1
6
2
FEATURING:
7
TWO-COLOR
CHANGE!
ICY WATER
Under 50°F/10°C
10
2
BHP98-0920
service.mattel.com
8
7
CONTENTS
WARNING:
CHOKING HAZARD – Small parts.
3
4
FAN FOLD
WARM WATER
Around 86°F/30°C
5
3 FOLD
TO PLAY (A)
MORE WAYS TO PLAY
TO PLAY (B)
1.
2. Lower into dunk tank to change color.
1.
2.
a
INSTRUCTIONS
3. If shark captures car...
b
CITY
Car transforms to
cold water color.
Car transforms to
cold water color.
3. Lift and release onto track.
SHARKPORT SHOWDOWN
5.
4. Send additional car to the rescue!
™
CONNECT TO OTHER HOT WHEELS® SETS
(SOLD SEPARATELY).
4. Speed by the shark to change color in the pool.
PERFORMANCE TIPS
Car transforms to
cold water color.
6. Hit lever to release captured car!
7.
0
Q. The car lift keeps jamming. Can it move more
smoothly?
A. Hold the set down with your other hand and the
car lift will move up and down smoothly.
SIDE VIEW
Q. My car keeps slowing down by itself on the
tracks.
A. Lint may collect around your car’s axles. This
may cause the car to run slowly. Use tweezers
or a toothpick to remove lint.
Cartransforms
transforms
Car
to to
warmwater
water
color.
warm
color.
Car transforms to
warm water color.
• Color change will last longer if you do not expose this toy to intense heat or direct sunlight for
prolonged periods of time.
• Drain, rinse, clean and dry all items thoroughly before storing. Do not immerse set in water.
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower,
World Finance Centre, Harbour City, Tsimshatsui, HK, China.Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5,
13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:03-78803817, Fax:03-78803867.
NOT FOR USE WITH SOME HOT WHEELS® VEHICLES.
6
4+
Not for children under 3 years.
1
ASSEMBLY
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
GET READY TO PLAY
2.
1.
x3
Press lever to expose the
round tab and connect it
to the shark as shown.
6.
7.
• Fill water to top of container for best
performance.
• Overfilling of reservoir may cause leakage.
• To avoid burns do not use water that is too hot,
above 120˚F/48˚C.
• Water toys sometimes get messy. Protect play
surfaces before use.
• For best performance of color change feature,
please use icy water under 50˚F/10˚C.
SIDE VIEW
3.
2
1
4
Align the letters
as shown.
a
A
3
Icy water
Under 50˚F/10˚C
4.
A
LABEL SHEET
5
8.
9.
© 2013 Mattel
BGK04-0310
7
5
8
10
9
APPLY LABELS
8
b
Warm water
86˚F/30˚C-104˚F/40˚C
6
Helpful Hint: Apply labels before assembly by number as indicated.
5
4
9
1
2
c
5.
3
1
6
2
FEATURING:
7
TWO-COLOR
CHANGE!
ICY WATER
Under 50°F/10°C
10
2
BHP98-0920
service.mattel.com
8
7
CONTENTS
WARNING:
CHOKING HAZARD – Small parts.
3
4
FAN FOLD
WARM WATER
Around 86°F/30°C
5
1 FOLD
SET UP & PLAY (CONTD.)
INSTRUCTIONS
TION
D. Release to launch your car up the ramp.
When it hits button on ramp, trap door will open and vehicle will fall into dunk tank!
• Color change will last longer if you do not expose this toy
to intense heat or direct sunlight for prolonged periods of time.
• Water toys sometimes get messy. Protect play surfaces before use.
• Drain, rinse, clean and dry all items thoroughly before storing.
• To avoid burns, do not use water that is too hot,
above 120°F/48˚C.
CITY
SPLASH & DASH
™
Water adds cool effects!
1
FEATURING:
TWO-COLOR
CHANGE!
2
ICY WATER
Under 50°F/10°C
WARM WATER
Around 86°F/30°C
RESET
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-800-524-8697. Mattel U.K. Ltd., Vanwall
Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.Diimport & Diedarkan Oleh: Mattel SEA Ptd
Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:03-78803817, Fax:03-78803867.
WARNING:
4+
CHOKING HAZARD – Small parts.
Not for children under 3 years.
4
1
CONTENTS
BHP98-0921
service.mattel.com
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
SET UP & PLAY
1.
Use clean water only.
Try different temperatures
for different color change
results. See back for details.
ASSEMBLY
Overfilling of reservoir may cause leakage.
1.
2.
2. Pull back on launcher as shown.
TWO LAUNCH
SETTINGS
3. REPLACE RUBBER BAND.
3. Place car in launcher.
1
2
4
5
3
ADULT SUPERVISION REQUIRED.
Tool not included.
NOT FOR USE WITH SOME HOT WHEELS® VEHICLES.
3
2
1 FOLD
1 FOLD
SET UP & PLAY (CONTD.)
INSTRUCTIONS
TION
D. Release to launch your car up the ramp.
When it hits button on ramp, trap door will open and vehicle will fall into dunk tank!
• Color change will last longer if you do not expose this toy
to intense heat or direct sunlight for prolonged periods of time.
• Water toys sometimes get messy. Protect play surfaces before use.
• Drain, rinse, clean and dry all items thoroughly before storing.
• To avoid burns, do not use water that is too hot,
above 120°F/48˚C.
CITY
SPLASH & DASH
™
Water adds cool effects!
1
FEATURING:
TWO-COLOR
CHANGE!
2
ICY WATER
Under 50°F/10°C
WARM WATER
Around 86°F/30°C
RESET
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-800-524-8697. Mattel U.K. Ltd., Vanwall
Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121. Consumer Advisory Service - 1300 135 312.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.Diimport & Diedarkan Oleh: Mattel SEA Ptd
Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:03-78803817, Fax:03-78803867.
WARNING:
4+
CHOKING HAZARD – Small parts.
Not for children under 3 years.
4
1
CONTENTS
BHP98-0921
service.mattel.com
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
SET UP & PLAY
1.
Use clean water only.
Try different temperatures
for different color change
results. See back for details.
ASSEMBLY
Overfilling of reservoir may cause leakage.
1.
2.
2. Pull back on launcher as shown.
TWO LAUNCH
SETTINGS
3. REPLACE RUBBER BAND.
3. Place car in launcher.
1
2
4
5
3
ADULT SUPERVISION REQUIRED.
Tool not included.
NOT FOR USE WITH SOME HOT WHEELS® VEHICLES.
3
2
1 FOLD