A.K. Mohanty Popular Press, Journals A Recent Article Published in Bioplastic Magazine 1.
Amar K. Mohanty and Rahul Bhardwaj, “Novel Nanostructured Polylactide Bioplastics for Multifarious Applications”, Bioplastics Magazine, Germany, June 2007, Vol. 2, p.32‐33 Peer Reviewed Journal Papers YEAR 2008 2.
3.
4.
5.
S. Singh, A. K. Mohanty, T. Sugie, Y. Takai, H. Hamada, “Renewable resource based biocomposites from natural fiber and polyhydroxybutyrate‐co‐valerate (PHBV) bioplastic”, Composites Part A: Applied Science and Manufacturing, 39(5), 875‐886 (2008). M. S. Huda, L. T. Drzal, A. K. Mohanty, M. Misra, “Effect of fiber surface‐treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers”, Composites Science and Technology, 68(2), 1753 (2008). D. Ray, S. Banerjee, A. K. Mohanty, M. Misra, “Thermal and Electrical Behavior of Vinylester Resin Matrix Composites Filled with Fly Ash Particles”, Polymer composites, 58‐62 (2008). M. S. Huda, L. T. Drzal, A. K. Mohanty, M. Misra, "Effect of chemical modifications of the pineapple leaf fiber surfaces on the interfacial and mechanical properties of laminated biocomposites", Composite Interfaces (Special Issue), 15( 2‐3), 169‐191(23) (2008). YEAR 2007 6.
R. Bhardwaj and A. K. Mohanty, “Modification of Brittle Polylactide (PLA) by Novel Hyperbranched Polymer based Nanostructures", Biomacromolecules 8(8), 2476‐2484 (2007). 7. S. Singh, A.K. Mohanty,"Wood fiber reinforced bacterial bioplastic composites: Fabrication and Performance Evaluation", Composites Science and Technology, 67 (9), 1753‐1763, July (2007). 8. M. Zampaloni, F. Pourboghrat , James Moore, S. A. Yankovich, B. N. Rodgers, L. T. Drzal, A. K. Mohanty and M. Misra, "Kenaf Natural Fiber Reinforced Polypropylene Composites: A Discussion on Manufacturing Problems and Solutions", Composites Part A, 38A(6), 1569‐1580 (2007). 9. W. Liu, K. Thayer, M. Misra, A. K. Mohanty, L. T. Drzal, “Processing and Physical Properties of Native Grass Reinforced Biocomposites”, Polymer Engineering and Science, 47(7), 969‐976 (2007). 10. W. Liu, L. T. Drzal, A. K. Mohanty, M. Misra, “Influence of processing methods and fiber length on physical properties of kenaf fiber reinforced soy based biocomposites”, Composites Part B: Engineering: Special Issue (Biocomposites), 38 (3), 352‐359 (2007). 11. M. S. Huda, L. T. Drzal, A. K. Mohanty, M. Misra, "The Effect of Silane Treated‐ and Untreated‐ Talc on the Mechanical and Physico‐mechanical Properties of Poly(lactic acid)/Newspaper fibers/Talc Hybrid Composites”, Composites Part B: Engineering: Special Issue (Biocomposites), 38 (3), 367‐379, (2007). 12. D. Ray, D. Bhattacharya, A. K. Mohanty, M. Misra "Modification of the dynamic damping behaviour of jute/vinylester composites with latex interlayer", Composites Part B: Engineering: Special Issue (Biocomposites), Composites: Part B 38 (3), 380–385 (2007). A.K. Mohanty 13. H. Miyagawa, A. K. Mohanty, R. Burgueño, L. T. Drzal, M. Misra, “Novel Biobased Resins from the Blends of Functionalized Soybean Oil and Unsaturated Polyester Resin”, Journal of Polymer Science Part B: Polymer Physics, Vol. 45, 698–704 (2007). 14. E. K. Drown, A. K. Mohanty, Y. Parulekar, D. Hasija, B. R. Harte, M. Misra, J. V. Kurian, “The Surface Characteristics of Organoclays and Their Effect on the Properties of Poly(trimethylene terephthalate) Nanocomposites”, Composites Science and Technology, 67, 3168 (2007). 15. Y. Parulekar, A K. Mohanty and Syed H. Imam,"Biodegradable Nanocomposites from Toughened Polyhydroxybutyrate and Titanate‐modified Montmorillonite Clay", Journal of Nanoscience and Nanotechnology, 7, 3580 (2007). 16. S. Sahoo, A. Nakai, M. Kotaki, U. S. Ishiaku, A. K. Mohanty, M. Misra, and H. Hamada “Mechanical Properties and Durability of Jute Reinforced Thermosetting Composites”, J. Biobased Materials and Bioenergy 1, 427 (2007). 17. Q. Wu, S. Selke and A. K. Mohanty, Processing and Properties of Biobased Blends from Soy Meal and Natural Rubber, Macomolecular Materials & Engineering, 292, 1149 (2007). 18. Q. Wu and A. K. Mohanty, “Renewable Resource based Biocomposites from Coproduct of Dry Milling Corn Ethanol Industry and Castor Oil based Biopolyurethanes", Journal of Biobased Materials and Bioenergy, 1, 257 (2007). 19. R. Bhardwaj and A. K. Mohanty, "Advances in the Properties of Polylactide based Materials: A Review", Journal of Biobased Materials and Bioenergy 1, 191 (2007). 20. Y. Parulekar and A. K. Mohanty, Extruded Biodegradable Cast Films from Polyhydroxyalkanoate and Thermoplastic Starch Blends: Fabrication and Characterization, Macomolecular Materials & Engineering, 292 (12), 1218 (2007). 21. Dipa Ray , S. Sengupta , S. P. Sengupta , A. K. Mohanty, M. Misra, A Study of the Mechanical and Fracture Behavior of Jute Fabric Reinforced Clay Modified Thermoplastic Starch Matrix Composites, Macomolecular Materials & Engineering, 292, 1075 (2007). 22. Q. Wu, S. Selke and A. K. Mohanty, Processing and Properties of Biobased Blends from Soy Meal and Natural Rubber, Macomolecular Materials & Engineering, 292, 1149 (2007). YEAR 2006 23. Y. P. Parulekar, A. K. Mohanty, “Biodegradable Toughened polymers from Renewable resources: Blends of Polyhydroxybutyrate with Epoxidized Naural Rubber and Maleated polybutadiene”, Green Chemistry, 8, 206‐213 (2006). 24. D. Aithani, A. K. Mohanty, “Value‐Added New Materials from Byproduct of Corn Based Ethanol Industries: Blends of Plasticized Corn Gluten Meal and Poly (є‐Caprolactone)”, Industrial & Engineering Chemistry Research, 45(18), 6147‐6152(2006). 25. A. Whaling, R. Bhardwaj, A. K. Mohanty, “Novel Talc‐Filled Biodegradable Bacterial Polyester Composites”, Industrial & Engineering Chemistry Research, 45 (22), 7497 ‐7503, (2006). 26. J‐W. Rhim, A. K. Mohanty, S. P. Singh, P. K. W. Ng, “Preparation and Properties of Biodegradable Multilayer Films Based on Soy Protein Isolate and Polylactide”, Industrial & Engineering Chemistry Research, 45, 3059‐
3066 (2006) 27. R. Bhardwaj, A. K. Mohanty, L.T. Drzal, F. Pourboghrat and M. Misra “Renewable Resource based Green Composites from Recycled Cellulose Fiber and Poly (3‐hydroxybutyarte‐co‐3‐hydroxyvalerate) Bioplastic”, Biomacromolecules, 7(6), 2044‐2051 ( 2006). 28. P. Tummala, W. Liu, L. T. Drzal, A. K. Mohanty, M. Misra, “Influence of plasticizers on thermal, mechanical properties and morphology of soy based bioplastics”, Industrial & Engineering Chemistry Research, 45, 7491‐7496 (2006). A.K. Mohanty 29. M. S. Huda, L. T. Drzal, A. K. Mohanty, M. Misra, “Chopped Glass and Recycled Newspaper as Reinforcement in Injection Molded Poly(lactic acid) (PLA) Composites: A Comparative Studies”, Composites Science and Technology, 66(11‐12), 1813‐1824 (2006). 30. H. Miyagawa, A. K. Mohanty, R. Burgueño, L. T. Drzal, M. Misra, “Characterization and Thermophysical Properties of Unsaturated Polyester‐Layered Silicate Nanocomposites”, Journal of Nanoscience and Nanotechnology, 6, 464‐471 (2006). 31. H. Miyagawa, A. K. Mohanty, R. Burgueño, L. T. Drzal, M. Misra, “Development of Biobased Unsaturated Polyester Containing Functionalized Linseed Oil”, Industrial & Engineering Chemistry Research, 45 (3), 1014‐
1018 (2006). 32. H. Miyagawa, R.J. Jurek, M. Misra, L. T. Drzal, A. K. Mohanty, "Biobased Epoxy/Clay Nanocomposites as a new matrix for CFRP”, Composite Part A: applied science and manufacturing, A 37 (1), 54‐62 (2006). 33. J‐W. Rhim, A.K. Mohanty, S. P. Singh, P. K. W. Ng “Effect of Processing Methods on Performance of Polylactide (PLA) Films: Thermocompression vs. Solvent Casting Methods”, Journal of Applied Polymer Science, 101, 3736‐3742 (2006) 34. H. M. Park, A. K. Mohanty, L. T. Drzal, E. Lee, D. F. Mielewski, M. Misra "Effect of Sequential Mixing and Compounding Conditions on Cellulose Acetate/ Layered Silicate Nanocomposites", Journal of Polymer and Environment, 14(1), 27‐35, 2006. 35. G. Mehta, L. T. Drzal, A. K. Mohanty and M. Misra, "Effect of Fiber Surfaces Treatment on Biocomposites from Nonwoven Industrial Hemp Fiber mats and Unsaturated Polyester resin" J. Applied Polymer Science, 99(3), 1055‐1068 (2006). 36. A. C. Wibowo, S. M. Desai, A. K. Mohanty, L. T. Drzal, M. Misra, “A solvent free graft copolymerization of maleic anhydride onto cellulose acetate butyrate bioplastic by reactive extrusion”, Macromolecular Materials and Engineering, 291, 90‐95 (2006) 37. A. Wibowo, M. Misra, H. M. Park, L. T. Drzal, R. Schalek, A. K. Mohanty, “Biodegradable nanocomposites from cellulose acetate: Mechanical, morphological, and thermal properties”, Composites: Part A, 37, 1428‐
1433, (2006). 38. D. Ray, D. Bhattacharya, A. K. Mohanty, L. T. Drzal, M. Misra 'Static and Dynamic Mechanical Properties of Vinylester Resin Matrix Composites Filled with Fly ash' Macromolecular Materials and Engineering, 291(7), 784‐792(2006). 39. D. Ray, S. Sengupta, S. P. Sengupta, A. K. Mohanty, M. Misra, “Preparation and Properties of Vinylester Resin/Clay Nanocomposites”, Macromolecular Materials and Engineering, 291 (12), 1513 – 1520 (2006). 40. M. S. Huda, L. T. Drzal, A. K. Mohanty, M. Misra, “Wood Fiber Reinforced Poly(lactic acid) Composites: Physico‐Mechanical and Morphological Properties Evaluation”, Journal of Applied Polymer Science, 102, 4856‐4869(2006). 41. G. Mehta, A. K. Mohanty, L. T. Drzal, D‐P Kamdem and M. Misra, “Effect of Accelerated Weathering on Biocomposites Processed by SMC and Compression Molding”, Journal of Polymer and Environment, (Web Published, August 2006). YEAR 2005 42. Y. P. Parulekar, A. K. Mohanty, “Effect of Titanate‐based Surfaces on Hydrophilicity and Interlayer spacing of Montmorillonote Clay for Polymer Nanocomposites”, Journal of Nanoscience and Nanotechnology, 12(5), 2138‐2143 (2005). 43. H. Miyagawa, M. Misra, A. K. Mohanty, “Mechanical Properties of Carbon Nanotubes and Their Polymer Nanocomposites: A Review”, Journal of Nanoscience and Nanotechnology, 5 (10), 1593‐1615 (2005). (REVIEW ARTICLE) 44. H. Miyagawa, A. K. Mohanty, M. Misra, and L. T. Drzal, “Novel biobased nanocomposites from functionalised vegetable oil and organically‐modified layered silicate clay", Polymer, 46(2), 445‐453 (2005). A.K. Mohanty 45. W. Liu, A. K. Mohanty, L. T. Drzal, M. Misra, J.V. Kurian, R.W. Miller and N. Strickland, “Injection Molded Glass Fiber Reinforced Poly(trimethylene terephthalate) composites: Fabrication and Properties Evaluation”. Industrial and Engineering Chemistry Research, 44(4), 857‐862 (2005) 46. H. Miyagawa, M. Misra, L. T. Drzal, A. K. Mohanty, "Biobased Epoxy/Layered Silicate Nanocomposites: Thermophysical Properties and Fracture Behavior Evaluation", Journal of Polymers and the Environment, 13(2), 87‐96 (2005). 47. J. K. Pandey, A.P. Kumar, M. Misra, A. K. Mohanty, L.T. Drzal, R. P. Singh, “Recent Advances in Biodegradable Nanocomposites”, Journal of Nanoscience and Nanotechnology, 5(4), 497‐525 (2005). (REVIEW ARTICLE) 48. A. K. Mohanty, P. Tummala, W. Liu, M. Misra, P.V. Mulukutla, L.T. Drzal “Injection Molded Biocomposites from Soy Protein Based Bioplastic and Short Industrial Hemp Fiber”, Journal of Polymers and the Environment, 13 (3), 279‐285 (2005). 49. W. Liu, M. Misra, P. Askeland, L. T. Drzal, A. K. Mohanty, “Green composites from soybased plastic and pineapple leaf fiber: Fabrication and properties evaluation”, Polymer, 46(8), 2710‐2721 (2005). 50. M.S. Huda, L. T. Drzal, M. Misra, A.K. Mohanty, K. Williams, D. F. Mielewiski, "A Study on Biocomposite from Recycled Newspaper Fiber and Poly (lactic acid)”, Industrial & Engineering Chemistry Research, 44 (15), 5593‐5601 (2005) 51. H. Miyagawa, M. Misra, L. T. Drzal, and A. K. Mohanty, “Fracture Toughness and Impact Strength of Anhydride ‐cured Biobased Epoxy”, Polymer Engineering and Science, 45(4), 487‐495 (2005) 52. H. Miyagawa, A. K. Mohanty, L. T. Drzal, and M. Misra, “Nanocomposites from Biobased Epoxy and Single‐
Walled Carbon Nanotubes: Synthesis, Mechanical and Thermophysical Properties Evaluation” Nanotechnology 16, 118‐124, (2005). 53. R. Burgueño, M. J. Quagliata, A. K. Mohanty, G. Mehta, L. T. Drzal, and M. Misra, “Hybrid Biofiber‐Based Composites for Structural Cellular Plates”, Composites Part A: applied science and manufacturing, 36, 581‐
593, (2005). 54. R. Burgueño, M. J. Quagliata, G. Mehta, A. K. Mohanty, M. Misra, and L. T. Drzal, “Hierarchical cellular design for load‐bearing biocomposite beam and plates”, J. of Materials Sci. & Engg., 390(1‐2), 178‐187 (2005) 55. R. Burgueño, M. J. Quagliata, G. Mehta, A. K. Mohanty, M. Misra, and L. T. Drzal, “Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications,” Journal of Polymers and the Environment, 13 (2), 139‐149 (2005) 56. M.S. Huda, A.K. Mohanty, L. T. Drzal, E. Schut, and M. Misra "Green composite from recycled cellulose and Poly(lactic acid): Physico‐mechanical and morphological evaluation", J. Materials Science, 40 (16), 4221‐
4229 (2005) 57. G. Mehta, A.K. Mohanty, Kelby Thayer, M. Misra, and L.T. Drzal, “Novel Biocomposites Sheet Molding Compounds for Low cost Housing Panel Applications", J. of Polymer and Environment, 13 (2), 169‐175 (2005) YEAR 2004 58. W. Liu, A. K. Mohanty, L. T. Drzal, M. Misra, “Novel Biocomposites from Native Grass and Soy Based Bioplastics: Processing and Properties Evaluation”. Industrial and Engineering Chemistry Research, 44 (18), 7105‐7112 (2005) 59. J. S. Choi, S.T. Lim, H. J. Choi, A. K. Mohanty, M. Misra, L. T. Drzal, A. Wibowo, "Rheological, thermal, and morphological characteristics of plasticized cellulose acetate composite with natural fibers" Macromolecular Symposia (224) 297‐307, 2005. 60. A. K. Mohanty, A. Wibowo, M. Misra, L. T. Drzal, “Effect of Process Engineering on the Performance of Natural Fiber Reinforced Cellulose Acetate Biocomposites” Composites Part A: applied science and manufacturing, 35, 363 – 370 (2004). A.K. Mohanty 61. S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra and G. Hinrichsen, “A review on pineapple leaf fibers, sisal fibers and their biocomposites”, Macromolecular Materials and Engineering, 289, 955–974 (2004). (REVIEW ARTCLE). 62. H. Park, M. Misra, L. T. Drzal, A. K. Mohanty, “'Green' Nanocomposites from Cellulose Acetate Bioplastic and Clay: Effect of eco‐friendly triethyl citrate plasticizer”, Biomacromolecules, 5, 2281‐2288 (2004). 63. H. Park, X. Liang, A. K. Mohanty, M. Misra, L.T. Drzal, "Effect of Compatibilizer on Nanostructure of the Biodegradable Cellulose Acetate/Organoclay Nanocomposites” Macromolecules, 37, 9076‐9082 (2004). 64. G. Mehta, A. K. Mohanty, M. Misra, L. T. Drzal, ‘Biobased resin as a toughening agent for biocomposites’, Green Chemistry, 6, 254‐258 (2004). 65. R. Burgueno, M. J. Quagliata, A. K. Mohanty, G. Mehta, L. T. Drzal, M. Misra, ‘Load‐bearing natural fiber composite cellular beams and panel’, Composites Part A: applied science and manufacturing, 35, 645‐656 (2004). 66. W. Liu, A. K. Mohanty, L. T. Drzal, P. Askeland, M. Misra, “Effect of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites”, Journal of Materials Science, 39, 1051‐1054 (2004). 67. S. V. Joshi, L. T. Drzal, A. K. Mohanty, S. Arora, “Are Natural Fiber Composites Environmentally Superior to Glass Fiber Reinforced Composites?”, Composites Part A: applied science and manufacturing, 35, 371‐376 (2004). 68. J‐P. Latere Dwan’isa, A. K. Mohanty, M. Misra, L. T. Drzal, M. Kazemizadeh, “Biobased Polyurethane and Its Composite with Glass Fiber”, Journal of Materials Science, 39(6), 2081‐2087 (2004) 69. J‐P. Latere Dwan’isa, A. K. Mohanty, M. Misra, L. T. Drzal, M. Kazemizadeh, “Biocomposite Materials from Natural Fiber and Soyoil‐based Polyurethanes: Fabrication and Dynamic Mechanical Analysis”, Journal of Materials Science; 39, 1887‐1890 (2004). 70. G. Mehta, A. K. Mohanty, M. Misra, and L. T. Drzal, “Effect of Novel Sizing on the Mechanical and Morphological Characteristics of Natural Fiber Reinforced Unsaturated Polyester Resin based Bio‐
Composites”, Journal of Materials Science, 39, (8), 2961‐2964 (2004). 71. H. Miyagawa, A. K. Mohanty, M. Misra, and L. T. Drzal, “Thermo‐physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil: Part 1: Anhydride‐cured Epoxy”, Macromolecular Materials and Engineering; 289, 629‐635 (2004). 72. H. Miyagawa, A. K. Mohanty, M. Misra, and L. T. Drzal, “Thermo‐physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil: Part 2: Amine‐cured Epoxy”, Macromolecular Materials and Engineering, 289, 636‐641 (2004). 73. A. C. Wibowo, A. K. Mohanty, M. Misra, and L. T. Drzal “Hemp Fiber Reinforced Cellulosic Plastic Bio‐
composites: Thermo‐Mechanical and Morphological Characterization”, Industrial and Engineering Chemistry Research, 43, 4883‐4888 (2004). 74. W. Liu, A. K. Mohanty, P. Askeland, L. T. Drzal, M. Misra, “Influence of Fiber Surface Treatment on Properties of Indian Grass Fiber Reinforced Soy Protein Based Biocomposites”, Polymer, 45, 7589‐7596 (2004). 75. H. Miyagawa, A. K. Mohanty, L.T. Drzal, M. Misra, ‘Effect of clay and alumina‐nanowhisker reinforcements on the mechanical properties of nanocomposites from biobased epoxy: A comparative study’, Industrial & Engineering Chemistry Research, 43 (22), 7001‐7009 (2004). 76. J. S. Choi, S. T. Lim, H. J. Choi, A. K. Mohanty, L. T. Drzal, M. Misra, A. Wibowo, “Preparation and characterization of plasticized cellulose acetate biocomposite with natural fiber”, Journal of Materials Science, 39(21), 6631‐6633 (2004) A.K. Mohanty YEAR 2003 77. A. K. Mohanty, A. Wibowo, M. Misra, L. T. Drzal, “Development of Renewable Resource Based Cellulose Acetate Bioplastic: Effect of Process Engineering on the Performance of Cellulosic Plastic”, Polymer Engineering & Science, 43 (5), 1151‐1161 (2003).J‐P. Latere Dwan’Isa, A. K. Mohanty, M. Misra, L. T. Drzal and M. Kazemizadeh, “Novel Biobased Polyurethanes Synthesized from Soybean Phosphate Ester Polyols and 4,4’‐Diphenylmethane Diisocyanate: Studies on Thermo‐mechanical Properties, Journal of Polymers and the Environment, 11(4), 161‐168 (2003). 78. S. Mishra, A. K. Mohanty, L. T. Drzal, M. Misra, S. Parija, S. K. Nayak, S. S. Tripathy, “Studies on Mechanical Performance of Biofiber/Glass Reinforced Polyester Hybrid Composites”, Composites Science and Technology, 63, 1377 – 1385 (2003). 79. J. Rout, M. Misra, A. K. Mohanty; S. K. Nayak, S. S. Tripathy, SEM Observations of the Fractured Surfaces of Coir Composites, Journal of Reinforced Plastics and Composites, 22 (12), 1083 – 1100 (2003). YEAR 2002 80. A. K. Mohanty, L. T. Drzal, M. Misra, “Novel Hybrid Coupling Agent As Adhesion Promoter in Natural Fiber Reinforced Powder Polypropylene Composites”, Journal of Materials Science Letter, 21, 1885‐1888 (2002). 81. A. K. Mohanty, M. Misra, L. T. Drzal, “Sustainable Bio‐Composites From Renewable Resources: Opportunities and Challenges in the Green Materials World”, Journal of Polymers and the Environment, 10 (1/2), 19‐26 (2002). 82. A. K. Mohanty, L. T. Drzal, M. Misra, “Engineered Natural Fiber Reinforced Composites: Influence of Surface Modifications and Novel Powder Impregnation Processing”, Journal of Adhesion Science and Technology, 16 (8), 999‐1015 (2002). 83. K. Chander, A. K. Mohanty, R. G. Joergensen, “Decomposition of biodegradable packing materials jute, Biopol, BAK and their composites in soil“, Biology and Fertility of Soils, 36, 344‐349 (2002). 84. J. Rout, M. Misra, S. S. Tripathy, S. K. Nayak, A. K. Mohanty, “Surface Modification of Coir Fibers. II. Cu(II) – IO4‐ Initiated Graft Copolymerization of Acrylonitrile onto Chemically Modified Coir Fibers”, Journal of Applied Polymer Science, 84, 75‐82 (2002). 85. S. Mishra, M. Misra, S. S. Tripathy, S. K. Nayak, A. K. Mohanty, “The Influence of chemical surface modification on performance of Sisal‐polyester Biocomposites”, Polymer Composites, 23 (2), 164‐170 (2002). 86. S. Mishra, M. Misra, S. S. Tripathy, S. K. Nayak, A. K. Mohanty, “Novel Eco‐friendly Biocomposites: Biofiber Reinforced Biodegradable Polyester Amide Composites – Fabrication and Properties Evaluation, Journal of Reinforced Plastics and Composites, 21(1), 55‐70 (2002). 87. B. N. Das, M. Sarkar, A. K. Rana, M. Misra, A. K. Mohanty, S. S. Tripathy, “A study on biodegradable composite prepared from jute felt and polyesteramide (BAK)”, Journal of Reinforced Plastics and Composites, 21(16), 1493‐1503 (2002). A.K. Mohanty YEAR 2001 88. A. K. Mohanty, M. Misra, L. T. Drzal, “Surface modifications of natural fibers and performance of the resulting biocomposites: An Overview“, Composite Interface, 8(5), 313‐343 (2001). (REVIEW ARTICLE) 89. S. Mishra, M. Misra, S. S. Tripathy, S. K. Nayak, A. K. Mohanty, “Potentiality of Pineapple Leaf Fiber as Reinforcement in PALF‐Polyester Composites – Surface Modification and Mechanical Properties”, Journal of Reinforced Plastics and Composites, 20(4), 321‐334 (2001). 90. J. Rout, M. Misra, S. S. Tripathy, S. K. Nayak, A. K. Mohanty, “Novel Eco‐Friendly Biodegradable Coir‐
Polyester Amide Biocomposites,: Fabrication & Properties Evaluation”, Polymer Composites, 22(6), 770‐778 (2001). 91. A. Bismarck, A. K. Mohanty, I. Aranberri‐Askargorta, S. Czapla, M. Misra, G. Hinrichsen, J. Springer, “Surface characterization of natural fibers; surface properties and water up‐take behavior of modified sisal and coir fibers“, Green Chemistry, 3, 100‐107 (2001). 92. J. Rout, M. Misra, S. S. Tripathy, S. K. Nayak, A. K. Mohanty, “The Influence of fiber treatment on the performance of coir‐polyester composites”, Composites Science and Technology, 61, 1303‐1310 (2001). 93. S. Mishra, M. Misra, S. S. Tripathy, S. K. Nayak, A. K. Mohanty, “Graft Co‐polymerization of Acrylonitrile on to chemically modified sisal fibers: Characterization and Physico‐mechanical properties”, Macromolecular Materials and Engineering, 286(2), 107‐113 (2001). 94. J. Rout, M. Misra, S. S. Tripathy, S. K. Nayak, A. K. Mohanty, “The Influence of fiber surface modification on the mechanical properties of coir‐polyester composites,” Polymer Composites, 22(4), 468‐476 (2001). 95. J. Rout, S. S. Tripathy, S. K. Nayak, M. Misra, A. K. Mohanty, “Scanning Electron Microscopy Study of Chemically Modified Coir Fibers”, Journal of Applied Polymer Science, 79, 1169‐1177 (2001). 96. S. Parija, A. K. Mohanty, M. Misra, S. K. Nayak, S. S. Tripathy, Studies on Synthesis, Characterization, and Adhesive Evaluation on KFA substituted Resole Adhesive, Polymers for Advanced Technologies, 12, 1‐8 (2001). 97. S. Parija, M. Misra, A. K. Mohanty, “Studies on Gum Adhesive Extracts: An Overview”, Journal of Macromolecular Science – Polymer Reviews, C41 (3), 175‐197 (2001). (REVIEW ARTICLE) YEAR 2000 98. A. K. Mohanty, M. Misra, G. Hirichsen, “Biofibers, biodegradable polymers and biocomposites: An Overview”, Macromolecular Materials and Engineering, 276/277, 1‐24(2000). (REVIEW ARTCLE) 99. A. K. Mohanty, M. A. Khan, S. Sahoo, G. Hinrichsen, “Effect of chemical modification on the performance of Biodegradable Jute yarn – Biopol® Composites”, Journal of Materials Science, 35(10), 2589‐2595 (2000). 100. A. K. Mohanty, M. A. Khan and G. Hinrichsen, “Influence of chemical surface modification on properties of biodegradable jute fabrics – polyester amide composites”, Composites – Part A, 31(2), 143‐150 (2000) 101. A. K. Mohanty, M. A. Khan and G. Hinrichsen, “Surface Modification of Jute and Its Influence on Performance of Biodegradable Jute fabric‐Biopol Composite”, Composite Science & Technology ; 60, 1115‐
1124 (2000). 102. A. K. Mohanty, P. C. Tripathy, M. Misra, S. Parija and S. Sahoo, “Surface Modification of Pineapple Leaf Fiber – Graft Copolymerization of Acrylonitrile onto Defatted Pineapple Leaf Fibers”, Journal of Applied Polymer Science, 77 (14), 3035‐3043 (2000) 103. A. Bismarck, J. Springer, A. K. Mohanty, G. Hinrichsen and M. A. Khan, “Zeta–Potential Measurements as Tool to Characterize Jute Fibers”, Colloid and Polymer Science, 278, 229‐235 (2000). A.K. Mohanty 104. S. Parija, A. K. Mohanty, M. Misra and S. K. Kayak, “Evaluation of Physico – Mechanical Properties of Biodegradable Kendu Gum Dust filled Polyolefins”, Polymer Degradation and Stability, 67, 7‐12, (2000). YEAR 1999 105. A. K. Mohanty, B.Misra, M.Misra and A. K. Panigrahi, “Nucleophilic Displacement Polymerization of N,N‘‐bis (p‐chlorobenzylidine‐4,4‘ ‐Diaminodiphenyl Ether with Sodium Sulfide”, Polymer –Plastics Technology and Engineering, 38(4), 783‐792 (1999). 106. P. C. Tripathy, M. Misra, S. Parija, S. Mishra and A. K. Mohanty, “Cu (II) – IO4‐ Initiated Graft Co‐
polymerization of Methyl Methacrylate on Defatted Pineapple Leaf Fibres”, Polymer International , 48, 868‐
872 (1999). 107. S. Parija, A. K. Mohanty, M. Misra and S. K. Nayak, “Studies on Effective Bond Strength of Kendu Fruit Gum Adhesive”, Polymer‐Plastics Technology and Engineering, 38(5), 1107‐1119 (1999). 108. J. Rout, M. Misra and A. K. Mohanty, “Surface Modification of Coir Fibers I – Studies on Graft Copolymerization of Methyl Methacrylate on to Chemically Modified Coir Fibers”, Polymers for Advanced Technologies, 10, 336‐344 (1999). YEAR 1998 109. M. Misra, D. Das, K. B. Padhi, A. K. Panigrahi and A. K. Mohanty, “Synthesis and Characterization of A Novel Heterocyclic Poly(Schiff base sulfide)polymer‐Nucleophilic Displacement Polymerization of N,N‐bis(p‐
chlorobenzylidine)‐2,6‐Diaminopyridine with Sodium Sulfide”, Journal of Macromolecular Science‐Pure & Applied Chemistry; A35(5), 867‐873 (1998). 110. A. K. Mohanty, D. Das, A. K. Panigrahi and M. Misra, “Synthesis and Characterization ofA Novel Polyamide – Polycondensation of 2,5 – Diaminothiazole with Terephthalic Acid”, European Poymer Journal, 34, 1889 – 1892 (1998). 111. A. K. Mohanty, S. Parija and M. Misra, “Characterization of Gum Adhesive from a Renewable Resource – Kendu Fruit”, Journal of Polymeric Materials, 15, 311‐315 (1998). 112. S. Samantoroy, A. K. Mohanty, and M. Misra, “Removal of Cr (VI) by Different Adsorbents – A Comparative Study, Indian Journal for Environmental Protection, B18 (9), 679 – 682 (1998). YEAR 1997 113. S. Parija, M. Misra and A. K. Mohanty, “Studies on Basic Chemistry of Gum Adhesive from A Renewable Resource: Kendu Fruit”, Journal of Polymeric Materials, 14, 297‐301 (1997). 114. S. Samantaroy, A. K. Mohanty and M. Misra, “Studies on Removal of Hexavalent Chromium by Kendu Fruit Gum Dust”, Journal of Applied Polymer Science, 66, 1485‐1494 (1997). 115. A. K. Mohanty, M.Misra and B.Misra, “Nucleophilic Displacement Polymerization of N,N‘‐bis (p‐
chlorobenzylidine)‐4,4‘‐Diaminodipheny Methane with Sodium Sulfide”, European Polymer Journal, 33(7), 1087‐1091 (1997). A.K. Mohanty YEAR 1996 116. A. K. Mohanty, S.Parija, and M.Misra, “Ce(IV) ‐ N‐Acetylglycine Initiated Graft Copolymerization of Acrylonitrile onto Chemically Modified Pineapple Leaf Fibers”, Journal of Applied Polymer Science, 60, 931‐
937(1996). 117. A. K. Mohanty, M.Misra, D.Pattanaik, and P.C.Tripathy, “Ce(IV) – N‐Acetylglycine Initiated Graft Copolymerization of Methylmethacrylate onto Chemically Modified Pineapple Leaf Fibers”, Polymer –Plastic Technology and Engineering, 35(3), 403‐415 (1996). YEAR 1995 118. A. K. Mohanty and M. Misra, “Graft Copolymerization of Acrylonitrile onto Chemically Modified Bleached Jute Fibers”, Die Angewandte Makromolekulare Chemie, 225, 1‐9 (1995). 119. A. K. Mohanty and M.Misra, “Studies on Jute Composites – A Literature Review”, Polymer –Plastics Technology and Engineering, 34(5), 729‐792 (1995) 120. A. K. Mohanty, M.Misra and B.C.Singh, “Kinetics of Retarded Polymerization – Investigation of the Retardation of Peroxydisulfate‐Thiourea Initiated Polymerization of Acrylonitrile by Phenol”, Polymer –
Plastics Technology and Engineering, 33(2), 219‐231 (1994). YEAR 1989 121. J. Das, A. K. Mohanty and B. C. Singh, “Fenton’s Reagent Initiated Graft Copolymerization of Acrylonitrile onto Jute Fibers”, Journal of Polymeric Materials, 6, 91‐96 (1989). 122. S. Pattanaik, S. Sarangi, A. K. Mohanty and B. C. Singh, “Graft Copolymerization of Acrylonitrile onto Jute Fibers(Studies on Ce(IV)‐Hippuric Acid Redox System)”, Journal of Applied Polymer Science, 37, 2099‐2107 (1989). 123. J. Das, A. K. Mohanty and B. C. Singh, “Fenton’s Reagent Initiated Graft Copolymerization of Methyl Methacrylate onto Jute Fibers”, Textile Research Journal, 59, 525‐529 (1989). 124. A. K. Mohanty, S. Pattanaik, B. C. Singh and M. Misra, “Graft Copolymerization of Acrylonitrile onto Acetylated Jute Fibres”, Journal of Applied Polymer Science, 37, 1171‐1181 (1989) 125. A. K. Mohanty and B. C. Singh, “Characterization of Methyl Methacrylate Grafted Jute Fibers”, Journal of Applied Polymer Science, 37, 1423‐1427 (1989) YEAR 1988 126. M. Misra, A. K. Mohanty and B. C. Singh, “Studies on Aqueous Polymerization of Acrylonitrile (Peroxydisulfate–Thiourea Redox System)”, Die Angewandte Makromolekulare Chemie, 157, 79‐91 (1988). 127. A. K. Mohanty and B. C. Singh, “Radiation‐Induced and Photo‐Induced Grafting onto Cellulose and Cellulosic Materials”, Polymer –Plastics Technology and Engineering, 27(4), 435‐466 (1988). (REVIEW PAPER) 128. A. K. Mohanty,”Graft Copolymerization of Vinyl Monomers onto Jute Fibers”, Journal of Macromolecular Science – Reviews in Macromolecular Chemistry and Physics, 27(3&4), 593‐639 (1987‐88). (REVIEW PAPER) A.K. Mohanty YEAR 1987 129. A. K. Mohanty and B. C. Singh, “Redox Initiated Graft Copolymerization onto Chemically Modified Jute Fibers”, Journal of Applied Polymer Science, 34, 1325‐1327 (1987) 130. A. K. Mohanty, B. C. Singh and M. Misra, “Kinetics of Retarded Polymerization – Investigation of the Retardation of V (V) – Thiourea Initiated Polymerization of Methyl Acrylate by Phenol”, Journal of Polymer Science: Part A; Polymer Chemistry, 25, 2107‐2116 (1987). 131. M. Misra, A. K. Mohanty, and B. C. Singh, “A Study on Grafting of Methyl Methcrylate onto Jute Fiber (S2O8‐
Thiourea Redox System), Journal of Applied Polymer Science, 33, 2809‐2819 (1987). 132. A. K. Mohanty, B. C. Singh and M. Misra, “Studies on Graft Copolymerization of Methyl Methacrylate onto Chemically Modified Tussa Silk Fibers”, Die Angewandte Makromolekulare Chemie, 150, 65‐79 (1987). 133. A. K. Mohanty, B. C. Singh and M. Misra, “Graft Copoymerization of Methyl Methacrylate onto Jute Fibers (Studies on Vanadium (V) – Cyclohexanol Redox System)”, Die Angewandte Makromolekulare Chemie, 147, 185‐197 (1987) YEAR 1986 134. M. Misra, A. K. Mohanty and B. C. Singh, “Kinetic Investigation on Aqueous Polymerization of Acrylonitrile – BrO3‐‐ /Cyclohexanone Redox System”, The Arabian Journal of Science and Engineering, 11(3), 259‐264 (1986). 135. A. K. Mohanty, M. Misra and B. C. Singh, “Redardation of V5+ ‐ Thiourea Initiated Polymerization of Acrylonitrile by Phenol”, Die Angewandte Makromolekulare Chemie, 142, 69‐78 (1986). 136. A. K. Mohanty, B. C. Singh and M. Misra, “Vanadium‐Cyclohexanone Initiated Graft Copolymerization of Methyl Methacrylate onto Jute Fibers”, Journal of Applied Polymer Science, 31, 1763‐1769 (1986).