Synapsis Workstation
(Chart-) Radar, ECDIS and Conning
Synapsis Workstations
BENEFITS AT A GLANCE
Radar, ECDIS and conning applications by Raytheon Anschütz
offer advanced functionality beyond basic IMO requirements to
contribute to safer navigation and more efficient watchkeeping.
• Safety and efficiency through “any function at any place”
• Integrated redundancies
(as a multifunctional workstation)
• Intelligent central alert management for safety and
reduced stress
• Fewer and standardized components for a less errorprone installation, thus better reliability
• Streamlined sensor collection increases flexibility and
reduces cabling efforts
Synapsis Workstations are available as a multifunctional
workstation with access to all nautical applications or as a
stand-alone system for a single application only. All applications
on the Synapsis Workstations use a standardized HMI and provide
central and local modes for dimming and color. Different color
palettes are available for day and night operations.
Standardized hardware components and an innovative network
simplify installation and offer high flexibility for future
adaptations and needed redundancy.
• Radar video on LAN
(integration of Anschütz NautoScan NX radar sensor)
• Standardized hardware simplifies installation, improves
logistics and facilitates services
• Software simplifies configuration and service
MULTIFUNCTIONAL
WORKSTATIONS
Synapsis Workstations can be easily configured according to
customer’s individual requirements –from a radar or ECDIS
workplace up to a fully integrated multifunctional workstation.
The workstations are based on the innovative and advanced
“next generation” system architecture.
With standardized hardware components and an innovative
network the “next generation” NX architecture significantly
improves flexibility, reliability and simplifies installation and
maintenance.
Small Marine Computer (SMC) and NautoPlex
Software
(Radar, ECDIS and/or Conning)
Radar Operator Panel
NautoScan NX
Radar Transceiver
Console and Display
INTELLIGENT SYSTEM ARCHITECTURE WITH BUILT-IN SAFETY
The intelligent system architecture reduces complexity of the system.
The new NX architecture reduces complexity and offers high
scalability, redundancy, and flexibility as well as a better resistance
to failures.
The Small Marine Computer (SMC) is the standard hardware
for all workstations. The NautoPlex collects data from all
serial attached sensors and distributes the data via LAN to the
workstations. The radar video is also distributed via LAN to
the workstations. Having all data enabled to LAN, additional
workstations can be easily added to the system. Each workstation
provides data processing and distribution.
Radar Transceiver 1
Workstation 3,4,5…
Workstation 1
Benefits:
· No need for analog radar video distribution
· No reduced performance due to damping in the video
distribution
· No need for extensive cabling of sensors to all individual
workstations
· No need for NMEA boosters for serial attached sensors
· No reduced functionality in case of single point failures
Each function at each workstation with full redundancy leads to
secure ship operation.
Radar Transceiver 2
Workstation 2
…
…
Workstation 3,4,5…
…
Multiple workstations
(Radar / ECDIS / Conning) can be added
…
Multiple workstations
(Radar / ECDIS / Conning) can be added
Small Marine Computer
(SMC)
Small Marine Computer
(SMC)
…
…
Switch 1
Switch 2
NautoPlex 1
NautoPlex 2
Sensors 1
e.g.: GPS 1, GPS 2, Log, AIS,
Echosounder, Navtex, Wind, RPM
Sensors 2
e.g.: GPS 1, GPS 2, Log, AIS,
Echosounder, Navtex, Wind, RPM
SYNAPSIS (CHART-) RADAR
All along Raytheon Anschütz radars have been known to be
among the most sensitive navigation radars. Thanks to advanced
radar technologies and intelligent functions, a strong detection
performance ensures highest standard of safety even under
rough weather conditions.
FEATURES AT A GLANCE
• High-fidelity radar video via LAN
(Anschütz NautoScan NX radar transceivers)
• Square radar display to maximize the situational picture
Synapsis NSX Radars offer the benefits provided with the
Synapsis Workstation generation. In addition the radar includes
advanced functions which contribute to optimized target presentation, a clear situational picture and right decision making
with regards to collision avoidance and safe navigation.
• Manual and automatic target acquisition and tracking
A clearly structured display of all control functions and status
indications as well as a dedicated radar operator panel further
ease operation.
• Integration of AIS targets
Central target management
The target management associates targets from individual
sensors to create new system-level targets for better situational
assessment.
SeaScout
SeaScout intuitively and efficiently supports the navigator in
finding a safe way through traffic and avoiding situations of
possible collision. The function analyzes the movement of plotted
objects and determines in which areas the danger for a possible
collision is exceptionally high. These areas are graphically
displayed on the screen.
• Advanced functions for anti-clutter and target presentation
• Various functions beyond IMO requirements intuitively
support situation assessment (e.g. combining Trial
Maneuver and SeaScout collision avoidance tool)
• Chart radar function (chart underlay to simplify
interpretation of the radar video)
• Integrated handling of sensor data, automatic selection
of best data (CCRS)
• Compliant with latest IMO regulations, incl. test standard
IEC 62388 ED2
• Easy installation, low installation cost
(NX architecture)
For details about NautoScan NX radar transceivers,
please refer to the NautoScan NX brochure.
Synapsis Radar
Synapsis Chart Radar
Antenna sensitivity controls incl. manual or
automatic anti-clutter controls
Cursor information in
radar video range
To combat clutter caused by rain, the
Synapsis Radar offers, apart from the
common FTC function an advanced
anti-clutter capability, which measures
the actual rain attenuation and
applies continuous filtering.
SeaScout
Target trails
also available in
relative mode, help
to clarify traffic
situations
Echo expansions:
enlarges tiny, nearby targets
ARPA Automatic tracking /
plotting of up to 70 targets,
offers full control even in dense
traffic. ARPA functionality
remains available in different
display modes e.g. when
switching from north-up to
head-up.
Own ship data provided
by several sensors
Target association of ARPA and AIS
targets, to avoid the presentation
of two full targets symbols for the
same physical target. The function
can be enabled or disabled. If the
AIS and radar information become
sufficiently different, the association
is cancelled and two targets are
displayed, no alarm is raised.
Radar operator panel
®
Chart radar
conditions
SYNAPSIS ECDIS
Raytheon Anschütz offers an advanced ECDIS (Electronic Chart
Display and Information System) with intelligent and powerful
functions for route planning and route monitoring.
The base for Synapsis ECDIS is a clear presentation of voyage
related information, the vessel’s position relative to shore and
structures, traffic separation zones, restricted areas, or other
ships. Beyond this, advanced functions are available which
account for safety at sea and effectively support and disburden
the master in long ranged business.
FEATURES AT A GLANCE
• Manual and automatic route planning function
• ETA calculator, tidal prediction mode and optional
weather chart overlay
• Look ahead zones and advanced functions for route
monitoring / anti-grounding
• Display of NAVTEX messages / areas of danger, AIS and
ARPA targets
All deliveries include access to the maker specific online ECDIStraining. A partner network of land-based training facilities is
also available.
More information under:
www.raytheon-anschuetz.com/ecdistraining/
• AIS server function, chart / route server function
• Support of Temporary and Preliminary (T&Ps) Notices to
Mariners (NMs)
• Track control Cat. C with Anschütz autopilots
• Options: Radar video overlay, tender tracking, weather
chart overlay
• Integrated handling of sensor data, automatic selection
Chart formats / availability
• C-Map ENC (paper chart equivalence)
• C-Map Professional +
• S 57/S 63 1.1 Encrypted ENC
• DNC
• ARCS
of best data (CCRS)
• Compliant with latest standards of IMO, IHO and IEC
including IEC 61174 Ed.4.0 and IHO Presentation Library
Annex A Ed. 4.0 to S-52 Ed. 6.1.
• Online operator training acc. to STCW
• Easy installation, low installation cost
(NX architecture)
Synapsis ECDIS
ECDIS in track control mode
Weather chart overlay (option)
The integrated weather overlay combines sea chart and weather
chart in one display to optimize route planning with regard to
fuel-efficiency, safety, on-time arrivals and travel comfort.
ECDIS night color
A comprehensive set of weather parameters can be chosen and
presented as values or symbols on a separate layer as needed.
If individual weather forecast values exceed the preset limits,
the values are shown graphically as weather warnings. Synapsis
ECDIS imports the weather data via a standardized GRIBfile
from a weather data provider of owner‘s choice.
SYNAPSIS CONNING NX
Synapsis Conning NX is the centralized data display for the
ship’s command. It makes available all bridge navigation and
machine status data easily at a glance. The combination of
different instruments and indications at a central display
increases situational awareness even in critical situations of
maneuvring and dockingand provides the operator with
efficient help in right decision making; thus Conning NX is
a strong contributor to safety at sea.
As a standard the Conning NX features different display modes
for different manoeuvring situations and for different types of
equipment, such as a navigation data display page, a docking
display page, a heading and rudder movement recording page,
an instruments page, or a track control page. Conning NX also
provides the central HMI for INS functions such as sensor
management, intelligent central alert monitoring and system
health monitoring.
Conning NX is a versatile and extremely capable software. It
allows creating individual display pages and even the implementation of additional functionality, including the ability to
control and actuate external hardware interfaces.
Synapsis Conning NX
FEATURES AT A GLANCE
• Additional situation awareness, easy to add to a system
• Not only a display: Conning allows operation of various
functions (depending on the individual configuration, e.g.
sensor selection, centralized alert presentation)
• Compliant to latest IMO standard for bridge alert
management (MSC.302(87))
• Graphics are individually adapted to the specific type of
equipment (like “widgets”)
• Different pre-configured pages for different maneuvering
situations (e.g. navigation, docking, track)
• Flexible application design allows creation of individual
graphics and pages
• Central HMI for functions provided within an integrated
navigation system (INS)
• Easy installation, low installation cost
(NX architecture)
Docking page
Conning application on 12" Synapsis Touch Panel
Together with the Synapsis Touch Panels, Conning NX can
provide the HMI for a centralized alert HMI (CAM-HMI) of
the INS, on bridge level or as a bridge alert management system
for DNV Class Notation OSV. Furthermore, thanks to its modular
and user-orientated structure, Conning NX is highly flexible to
integrate various analog and digital displays within customized
display pages. Customer-specific, switchable elements can be
created for dedicated functional pages and to actuate the
respective hardware interfaces.
Thruster page
642
(25.28")
429
(16.89")
225
225,1
(8.862")
(8.9")
382
(15.04")
– Powerful Quadcore i7 microprocessor
– Fanless operation and solid-state SSD
– 1x DVI-I and 2x displayport video outputs
– 24V power supply
382
(15.04")
Small Marine Computer
Our Small Marine Computer (SMC) is the standard for all Synapsis Workstations,
making logistics fairly simply and thus shortening service time and cost. The
SMC features a solid-state disk and passive cooling to increase reliability and
lifetime. With its ultra-compact design and powerful processing capabilities,
the SMC is ready for universal use on various ship types.
436
(17.17")
159
(6.26")
TECHNICAL DATA
159
(6.3")
253,1
(9.965")
436
(17.17")
225,1
(8.862")
(8.4")
213
213
(8.386")
429
(16.89")
159
(6.26")
NautoPlex
With the new scalable NautoPlex serial to LAN converters all serial sensor
data as well as status information is collected and distributed via LAN to every
workstation. The result: reduced cabling effort and enhanced flexibility.
642
(25.28")
Ethernet Switch
Space for cable
443
172
265
Height 82
Height 46
100
3.9"
Space for cable
Space for cable
Radar Operator Panel
ECDIS Operator Panel
288
11.3"
60
2.4"
288
11.3"
60
2.4"
213
(8.386")
253,1
(9.965")
Glass-front displays
10
21
81
05,05
002
M (2 : 5)
595,40 ±1
A
392,20 ±2
A
630,30
642
buzzer
Signalgeber
8
AC-connector
–DPResolution
1920x1200RS232
pixel
DVI-I 26":
HDMI
– Resolution 19": 1280x1024 pixel 5,0± 033
21
M
12
B
Scheibe/
glass
127 ±1
634
E
11
optionally connectors
DichtungThe
oben
workstations feature 19"/ 26" wide-screen, glass-front TFT monitors
CVBSto Y/C
und beidseitig/
sealing top
increase space for the presentation of radar video, electronic sea charts, and
H (1 : 2)
and both sides
sensor data.
Operators
benefit from a clear arrangement ofD57
all control
(5x1.5mm)
ohne
Dichtung/
without sealing
functions and status indications.
001
124,50 ±1
B
10
4x hole for thread bolt M6
4x Bohrung für Gew-Bo. M6/
C (1 : 2)
TECHNICAL DATA
002
620 ±0,5
62
A (1 : 1)
9
console cut-out
Pultausschnitt/
001
1,50
8
1± 752
1± 983
5
003
05,55
B (1 : 1)
F
7
6
GA ludoM ataD /HBMG CARNOC NOSSIMREP TUOHTIW YTRAP DRIHT OT DESOLCSID EB OT
5
11
M
C
B
C
without sealin
ohne Dichtun
D
81
Signalgeber/
buzzer
K-K (1 : 1)
001
Scheibe/
glass
D
E
G (1 : 2)
M6
A
Scheibe mit Siebdruck /
sheet with silk-screen
D (1 : 2)
1,50
B (1 : 1)
429
2
3
55,40 ±1
8
0,50x45°
4
559 ±1
Display rückseitig (mit Pultplatte)/
rear view (with console plate)
19"
382
003
Gewicht/weight: 14,0kg
395 ±2
330 ±0,5
12
26"
1
003
002
001
000
REV.
E (1 : 2)
1
2
3
NO. OF
CHANGES
Pflüger
Pflüger
Pflüger
Pflüger
DRAWN BY
30.01.2014
29.10.2013
12.09.2013
25.03.2013
REL.DATE
421046
420571
1315-179
1315-154
E.C.-NO.
3
67
PROJECT:
D-80687 München
DRAWING TITLE
Outline Drawing
6026SD R GA
314
FILE NUMBER:
SURFACES DIN ISO 1302
DRAWING/PART NUMBER
12003169
SCALE 1:5
003
SIZE ISO
218
8
1010267
CON0071C
TOLERANCES DIN ISO 2768-mK
74
5
6
7
12"
Synapsis Touch Panel
The new Synapsis Touch Panel (STP) is a smart multifunctional
display.The STP is available for mounting into the consoles as a
centralized display for alert management (INS, bridge level or as
NAUT-OSV CAM-HMI) or other specific function (via Conning NX
software modules). The STP is a 12" powerful panel PC with touch
display, solid state disk and low-noise passive cooling.
G
Steckv-Buzzer versetzt!
Buzzer hinzu!
RAN-Logo und Detail "Metallrahmen" hinzu!
Neuanlage
MODIFICATION/DESCRIPTION
siehe Stückliste
E
F
RELEASED: ja
D-97990 Weikersheim
MATERIAL
5
prelliminary
5%
FINISH
3
12
(5x1.5mm)
and both sides
sealing top
und beidseitig/
Dichtung oben
4x theread bolt
4x Gewindebolzen/
K
B
Metallrahmen/
metal frame
002
Freiraum
ringsum/
free space
all around
002
117,40 ±1
6/
6
buzzer
Signalgeber/
001
125
26
8
M (2 : 5)
620 ±0,5
436
J (1 : 1)
K
A
20
05,05
436
257 ±1
389 ±1
Scheibe mit Siebdruck /
sheet with silk-screen
Registered trademarks
Intel®, INTEL Corp.
Microsoft Corporation
A2
A (
6
TECHNICAL DATA
509
509
Consoles
All workstations are available in a deckstand version for standalone installations, in a table top version for installation at
the top of a console or in a black box version for integration
into consoles. The range is completed with a trackball and an
operator panel.
40°
546
696
150
536
701
min. 70
664
466
Subject to change due to technical developments without notice.
® If not otherwise stated, all trademarks including Anschütz and
are registered by Raytheon Anschütz GmbH
All rights reserved · Printed in Germany
RAN 801.32 e / L&S 0416
Raytheon Anschütz GmbH
Headquarters
D-24100 Kiel, Germany
Tel +49(0)431-3019-0
Fax +49(0)431-3019-291
www.raytheon-anschuetz.com