Another example of the
Bernoulli Principle.
The Bernoulli Principle
Show our product vs the competitons
Bernoulli’s principle states that for an inviscid flow, an increase in
the speed of the fluid occurs simultaneously with a decrease in
pressure or a decrease in the fluid’s potential energy.
As the speed of an airplane increases, air flows faster over
the curved top of the wing than underneath. The upward
The problem:
pressure exerted by the air under the wing is thus greater
Improperly designed ridge vent systems with flaps
deflecting airflow... reducing the potential effectiveness
for ventilation
than the pressure exerted downward above the wing,
resulting in a net upward force, or lift.
The solution:
LIFT
erted by faster-moving a
ir
re ex
ssu
Pre
RIDGE VENTS
Peak Performance.
Scan the QR code with your smart phone or
device to see the effect of airflow over several
different ridge vent systems.
Race cars use the principle to keep their wheels pressed to the
WING
ground as they accelerate. A race car’s spoiler—shaped like
an upside-down wing, with the curved surface at the bottom—
produces a net downward force.
Pressure exerted by slower-moving air
Specially designed channels that direct the air into the
ridge vent.
AIR
Using the principles of aerodynamic
engineering to properly ventilate your home
SERIES 5 RIDGE VENT
SERIES 6 RIDGE VENT
Width of Series 4.4 fits a broad
variety of shingle widths, allowing
unobstructed airflow
Internal baffles are virtually
invisible from any angle
U-Shape promotes a
well-balanced roof line
Patented inward baffles
facilitate uniform airflow
EAVE INTAKE VENT
One sided, preventing accidental
intake from occurring when airflow is
running parallel to the ridge
ROLLED RIDGE VENT
Because there is only one
side, shingle trimming is
never required or necessary
Internal baffles are virtually
invisible from any angle
Patent Pending
Patent Pending
Benefits
Benefits
• Completely invisible from the street
• Exterior baffle product
• No connectors, straps or gaskets
• Virtually invisible from any angle
• Comes with an all weather filter
• Self sealing ends
• Over one million installations
• Our specially formulated polymer
creates a stronger product than
the competition
• Integrated filter
• Exterior baffles and louvers for
extreme protection
• 12” width applications
• Available with self contained nails
• Pre-formed nail holes
• Exceeds Department of Energy
recommendations and all nationally
recognized building codes when
installed properly
• Raises the cap less than 1”
• Easy to install
• Virtually invisible from any angle
Cap shingles easily
conform to the rolled
vent, creating a uniform
ridge line
Patented inward baffles
facilitate uninterrupted
airflow
Weather filter
Benefits
Hot, moist air escapes
through the flexible, singlelayer, three dimensional
black matting
Easy to Install
Gun Nailable
126 Internal louvers in each 4’
section for extreme protection
Ridge Vent Application
448 Internal louvers per side in each
4’section for extreme protection
RIGID ROLLED VENT
TRUAIRBROCH 0115
SERIES 4.4 RIDGE VENT
• Raises the cap less than 1”
• Easy to install
• Pre-formed nail holes
• Exceeds Department of Energy
recommendations and all nationally
recognized building codes when
installed properly
Benefits
• Will work with all ridge cap sizes
• Provides intake ventilation for
homes with no overhang
• Pre-formed nail holes
• Comes with an all weather filter
• No connectors, straps or gaskets
• Raises the cap approximately 1”
• 12” width applications
• Easy to install
• Available with self contained nails
• No connectors, straps or gaskets
• Our specially formulated polymer
creates a stronger product than the
competition
• No connectors, straps or gaskets
• Exterior baffles and louvers for extreme protection
• Self Sealing Ends
• Available with self contained nails
• Interior baffles sections contain 896
louvers for proven protection
• Available with filter
SERIES 4.4 RIDGE VENT TECHNICAL SPECS
• No connectors, straps or gaskets
• Interior baffles and louvers for
proven protection
• Prevents rain, snow, and insect
infestation
• Nearly invisible
• Gun nailable
• Nearly invisible
• Gun nailable
• Natural sustainable building
product
• Easy to install
• Natural sustainable building
product
• Easy to install
• Prevents rain, snow, and insect
infestation
• Nails included
• Integrated filter
• Exceeds Department of Energy
recommendations and all nationally
recognized building codes when
installed properly
• Pre-formed nail holes
• Lightweight and easy to handle
• Unique product design maintains
proper orientation of baffle
• Prevents rain, snow, and insect
infestation
• Nails included
• Exceeds Department of Energy
recommendations and all nationally
recognized building codes when
installed properly
• Lightweight and easy to handle
• Easy to install
• Exceeds Department of Energy recommendations and all nationally recognized
building codes when installed properly
Though virtually undetectable from the street,
Series 5 allows just as much airflow as
external products.
Series 4.4 with all weather filter, provides a more
complete barrier to ensure better protection from
wind-driven rain, snow, dust and insect infiltration.
Benefits
Benefits
Up-The-Wall Application
Patent Pending
Most cap shingles do not fit standard ridge vents
resulting in obstruction of the baffle, sacrificing NFA.
Series 6 has a revolutionary one sided design and
fits any shingle cap 9” or larger, perfectly.
SERIES 5 RIDGE VENT TECHNICAL SPECS
Installed on the roof deck above the insulation line
TruAir’s Eave Intake Vent is designed to add
intake to homes without soffit.
SERIES 6 RIDGE VENT TECHNICAL SPECS
The freedom and usability of a rolled vent
now with comparable airflow to stick vents.
The freedom and usability of a rolled vent
now with comparable airflow to stick vents.
RIGID ROLLED VENT TECHNICAL SPECS
ROLLED RIDGE VENT TECHNICAL SPECS
EAVE INTAKE VENT TECHNICAL SPECS
TAVS4.4F - TAVS4.4FN
18 NFA
48” PC LENGTH
TAVS5
18 NFA
48” PC LENGTH
TAVS6N - TAVS6FN
12 NFA
48” PC LENGTH
TAEVF
9 NFA
48” PC LENGTH
TARRV
12 NFA
20’ PC LENGTH
TARV
15.2 NFA
20’ PC LENGTH
44 LINEAR FEET/CARTON
11 PC/CARTON
12 CARTON/PALLET
48 LINEAR FEET/CARTON
12 PC/CARTON
16 CARTON/PALLET
48 LINEAR FEET/CARTON
12 PC/CARTON
15 CARTON/PALLET
44 LINEAR FEET/CARTON
11 PC/CARTON
12 CARTON/PALLET
20 LINEAR FEET/CARTON
1 ROLL/CARTON
27 CARTON/PALLET
9 LBS/CARTON
1 ROLL/CARTON
36 CARTON/PALLET