Thermometers
Traceable Type-K
®
Traceable®
Dual-Channel
Thermometer
Chemical-and
shock-resistant case
Ideal for quality control, measuring temperatures in wastewater, petroleum products, and
biotechnology applications. Rugged case is
chemical and shock-resistant ABS plastic.
Thermometer shows two
probe readings and the
difference between readings
Traceable to NIST for accuracy
To assure accuracy an individually serialnumbered Traceable® Certificate is provided
from an ISO 17025 calibration laboratory
accredited by A2LA (A2LA and all European
National calibration certificates are mutually
recognised). It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology).
Monitors temperatures using two probes.
Dual-display simultaneously shows temperature
of both probes or temperature of one probe and the
difference between probes (T1-T2). With two separate
sensors, it is easy to note temperature variations in an
incubator/oven or temperature gradations in a water
bath. Sense changes between inlet and outlet temperatures in any system. HOLD key allows the display
to be frozen to capture readings.
Comes ready to use
Supplied with 9-volt alkaline battery and two fast-response, Type-K beaded probes, which indicate temperature
changes in less than one second. Cable length is 1.2 m.
Measures 76 x 178 x 32 mm and weight is 255 g.
Temperature range to 1230°C
Temperature ranges are –50.0 to 1999°F and –50.0 to
1230°C. Resolution is 0.1° under 200° and 1° above
200°. Meter-only accuracy is 0.3% plus 1°C. Extralarge, 19 mm-high display is readable from 4.5 m.
Uses all Type-K thermocouple probes.
(For a complete description of Type-K accessory probes see page 33.)
Description
Fisher Scientific Traceable Dual-Channel Thermometer
®
Cat. No.
Price
FB61228
₤167.00
Traceable® Waterproof Type-K Thermometer
Wide range thermometer reads –200 to 1300°C
Thermometer reads from –328 to 2372°F and –200 to 1300°C with a resolution of 0.1° and 1°. Switch
from °F to °C at the touch of a key. Jumbo, 16 mm-high digits are readable from 3 m away. Back-lighting key permits reading in dark areas. Unit features HOLD key that freezes display to capture current
reading. Battery powers unit for 1 year of routine use.
Waterproof to seal out moisture
One of the most technically advanced, fastest-reading, yet easy-to-use thermometers ever designed.
A microprocessor updates the display 2.5 times per second. Rugged unit is constructed of shockresistant ABS plastic. Waterproof design stops dirt, dust, fumes, and water—perfect for use in lab or
plant’s worst environment. Supplied rubber boot for probe connector allows the unit to remain waterproof with thermocouple attached. At the touch of a key, recalls minimum and maximum temperature
readings. Meter-only accuracy: ±0.3% of the reading plus 1°C between –200°C to 1000°C, otherwise
0.5% of the reading plus 1°C. Unique differential feature shows the difference in temperature from a
set point. Uses all Type-K thermocouple probes.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from an
ISO 17025 calibration laboratory accredited by A2LA (A2LA and all European National calibration
certificates are mutually recognised). It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology).
Designed for rough handling
Comes ready to use with carrying case, Traceable® Certificate, 9-volt battery, and fast-response,
Type-K beaded probe with cable length of 1.2 m. Size is 68 x 178 x 32 mm and weight is 227 g.
(For a complete description of Type-K accessory probes see page 33.)
Description
Fisher Scientific Traceable Waterproof Type-K Thermometer
®
30
Traceable® A2LA and all European National Calibration certificates are mutually recognised.
(see page 118-119 for further details)
Cat. No.
Price
FB61215
₤139.00