EBR-LCM3-1DD
Pluggable 3 Channel
LCM DALI/DSI Dimming
The EBR-LCM3-1DD is a Lighting Control Module that
forms an excellent option where three individually
addressable output channels are required with a
non-dimming channel.
The EBR-LCM3-1DD forms part of CP Electronics RAPID lighting control
system and provides three individually addressable output channels that
independently dim rows of DALI / DSI fluorescent or LED luminaires. An
additional switched output is provided for the control of non-dimming
devices such as ventilation or lighting equipment.
Key features
●●
Three addressable outputs
●●
Independent channel dimming
●●
Dim fluorescents or LED lamps
●●
●●
Installation and Connectivity
The EBR-LCM3-1DD is designed for ease of installation. There are 4 M6
keyways for fixing to the slab in the ceiling void or channel nut fixings for rod
suspension or fixing to cable basket. There is a spacious wiring compartment
with rear or side entry cable knock outs for connecting mains and switch
inputs. With 3 pluggable outputs each supplying a separate channel of
broadcast DALI or DSI and the capacity of up to 22 ballasts per channel, the
EBR-LCM3-1DD is the perfect option for many control applications. The 3
addressable outputs also share a relay providing a switched live output for
fixed output luminaires and a second relay for emergency test. The 4th
output is a Volt Free contact to control a range of external devices such as
ventilation or a fixed output white board luminaire.
●●
Additional switched output to
control non dimming devices
DALI / DSI Broadcast
Manufactured in flame
retardant material
●●
Manufactured in the UK
●●
5 year warranty included
CAT 5 cable
RAPID DALI/DSI LCM
3 core SELV
RAPID Microwave
The EBR-LCM3-1DD is an ideal solution for classroom applications with three
luminaire rows and a white board with a manual switch dimming. A
graduated dimming function is available to allow the window row to dim to
20%, the middle row to 60% and the 3rd row to 90% or 100%.
Interface Flexibility
The EBR-LCM3-1DD also has a total of 11 switch inputs. 6 in the wiring
compartment with screw terminals and 7 via an RJ45 port. This allows for
multiple switch interface options in relation to each output channel. There are
also 2 RJ45 ports for connection of detectors and /or scene plate and also 2 RJ45
ports for CAN BUS networking as part of a full RAPID system (not stand alone).
RAPID PIR
Broadcast
DALI bus Ch 1
Broadcast
DALI bus Ch 2
RAPID Scene plates
Broadcast DALI
bus Ch 3
Standard light
switches
DALI light fittings
DALI light fittings
DSI light fittings
Dimensions
Programming simplicity
202mm
127mm
Please note that certain applications may require on-site commissioning – consult
our technical team for details.
150mm
146mm
The EBR-LCM3-1DD also has a number of presets stored within it that allows for
various control and switching options. These can be simply selected on site using
the UNLCDHS by the installation contractor. Parameters for the detector in the
room can also be simply adjusted via the UNLCDHS. This allows for simple set up
on site and reduces commissioning time and costs.
Fixing points M6 (1/4”)
Technical Specification
Electrical data
Weight
Supply Voltage
Frequency
Relay rating
Terminal Capacity
Load per LCM
Load per Channel
Dimming
Environmental data
0.45Kg
220–240VAC +/- 10%
50Hz
Switched live 10A
Switched permanent live 6A
Volt free output (VFC) 6A
Mains - 4mm2 in wiring compartment
Switched inputs and CAN - 2.5mm2 in wiring compartment
10A
6A fluorescent and incandescent lighting
3A compact fluorescent lighting
3A low energy lighting
3A low voltage lighting (switch primary of transformer)
3A fans and ventilation equipment
Switch SON lighting loads via a contactor
Maximum 22 ballasts per channel (current limit 50mA per
channel) Cable lengths for dimming outputs:
100m using 0.5mm2 wire
150m using 1.00mm2 wire
300m using 1.5mm2 wire
Temperature range
Humidity
Material (casing)
-10°C to 35°C
5 to 95% non-condensing
Flame retardant ABS and PC/ABS
Classifications
Insulation
Purpose
Construction
Type of action
Software class
Pollution
Class II
Operating control
Independently mounted control for surface mounting
Type 1.B action micro disconnection
Class A
Degree 2
Compliance
Compliance
EMC-2004/108/EC
LVD-2006/95/EC
Order Codes
Control modules
Detectors
Scene plate
Accessories
EBR-LCM3-1DD
EBR-LCM3-1DD-B
EBR-CPIR
EBR-MINPIR
EBR-MWS3A
EBR-4SC
UNLCDHS
Pluggable 3+1 channel LCM DALI/DSI dimming – grey connectors
Pluggable 3+1 channel LCM DALI/DSI dimming – blue connectors
RAPID ceiling mounted PIR presence/absence detector
RAPID miniature ceiling mounted PIR presence/absence detector
RAPID adjustable head microwave presence/absence detector
Scene select plate
Professional commissioning LCD programming handset
UNLCDHS
IMPORTANT NOTICE:
This device should be installed by a qualified electrician in accordance with the latest
edition of the IEE Wiring Regulations and any applicable Building Regulations.
CP Electronics
Brent Crescent
London NW10 7XR
United Kingdom
t. +44 (0)333 900 0671
f. +44 (0)333 900 0674
[email protected]
www.cpelectronics.co.uk
Due to our policy of continual product improvement
CP Electronics reserves the right to alter the
specification of this product without prior notice.
PM-CPDS-022