TEST REPORT Chainsaw Stihl MS 362 Test no.: 5790 OWNER OF THE TEST CERTIFICATE: Manufacturer and applicant: Andreas Stihl AG & Co. KG Badstrasse 115 D- 71336 Waiblingen www.stihl.de 5303 chainsaw STIHL MS 311 Test results and evaluations Chainsaw STIHL MS 362 With up to 45 cm cutting length Company: Andreas Stihl AG & Co. KG; Badstrasse 115; D- 71336 Waiblingen Test item Test results Function Chainsaw in the power class up to 4 kW, for professional use Evaluation Engine power P max = 3.4 kW at Md max = 2.8 kW Engine speed 9800 min-1 Torque Spec. fuel consumption 58 kW/l 3.4 Nm max. 3.6 Nm 7500 min-1 NE 47 kW/l Fuel consumption absolute / specific max. power 380 g/kWh 1.8 l/h max. torque 410 g/kWh 1.6 l/h Exhaust emission complies with level 2 of the standard 2002/88/EG + ++ EG-type approval by the federal transport agency e1*97/68SH3IIA*2004/26*0556*00 Chain lubrication Oil consumption at 5000 min-1 min / max 4 ml/min at 9000 min-1 9 ml/min 7 ml/min 16 ml/min o Sound pressure level at ear of the operator idling speed 84 dB(A) full load speed 104 dB(A) full throttle no load 105 dB(A) - Equivalent sound pressure level, total value 103 dB(A) (Average: idling – full load – full throttle) Accoustic power 113 dB(A) according to standard DIN EN ISO 22868 Vibration Cutting equipment 40 cm 3/8 “ (chain 36 RMC) idling speed full load speed full throttle no load 4.8 m/s² 2.6 m/s2 2.6 m/s² 5.0 m/s² rear handle Total equivalent vibration according to DIN EN ISO 22867 Front handle 3.6 m/s²; rear handle 3.6 m/s² 2.8 m/s² front handle 3.0 m/s² 2/5 o 5303 chainsaw STIHL MS 311 Chain brake Hand guard activation Inertia activation Actuating force 38 N aver. braking time 0.1 s horizontal acceleration 460 m/s² max. braking time 0.12 s NE vertical acceleration 992 m/s² Kickback Full chisel tooth 3/8“(36RSC) Kickback angle with brake 42 ° Cutting equipment 40 cm Chain stop angle 25 ° NE Weight Weight per unit power With cutting equipment, 45 cm 2.2 kg/kW Without cutting equipment 1.8 kg/kW + Operability / handling Control elements Easy to reach and use + Primer Deco-valve, Comfort models equipped with "Ergostart" for easier start + Chain assembly Chain tensioning Simple, chain sprocket easy accessed o simple, laterally in the chain sprocket cover o Tank caps No tools required for removal, access good o Air filter and spark plug covers and casing Easy to disassemble with quick release bolts; easy dissemble using adjustable wrench - Air filter No tools required, clamps low + + Reliability Initial tests revealed that the fuel tank could not be emptied when the saw was mainly used for vertical cuts. Furthermore the warm motor was sometimes difficult to restart. Modified test models in which these faults were corrected were tested at a later stage. These modifications will be introduced as of December 2011. o Operating manual clear, well illustrated + Operator safety EG-type examination test (DPLF) Test certificate no K-EG 2009/5159 GS-type examination test (DPLF) Test certificate no K-GS 2009/5159 Maintenance cleaning soiling Rating: ++ / + / o / - / --./.(o = Standard / NE= no evaluation, complies with tolerance value) Tolerance values and evaluation criteria are described in the “Informationen zur Gebrauchswertprüfung“(“Information about type examination tests”). This publication is available from the DLG and the KWF. 3/5 NE NE 5303 chainsaw STIHL MS 311 Description and Technical Data Engine - Air-cooled single-cylinder two-stroke engine - engine displacement 59 cm³; bore 47 mm; stroke 34 mm - Fuel: minimum octane number 90 ROZ; Manufacturer's recommendation: Stihl MotoMix 92 ROZ - Spark plug Bosch WSR-6F or NGK BPMR 7A - Idling speed 2800 min-1; max. speed 14000 min-1 (electronic speed limiter) Cutting equipment - Clutch drum with external chain sprocket; Guide bar with sprocket nose Rollomatic E - Half or full chisel tooth, Pitch 3/8“, gauge 1.6 mm - Guide bars for 37, 40, 45 and 50 cm cutting lengths Main dimensions and weights Length Width Height Stump height Tank volume Weight incl. cutting equipment 45 cm 890 mm engine unit without spiked bumper 445 mm engine unit 195 mm incl. handle 255 mm engine unit 220 mm with front hand guard 295 mm chain sprocket cover 25 mm handle 30 mm Fuel 600 ml Chain oil 325 ml incl. cutting equipment 45 cm 7.4 kg without cutting equipment 6.0 kg 4/5 5303 chainsaw STIHL MS 311 Test Test carried out by Kuratorium für Waldarbeit und Forsttechnik, Gross-Umstadt DLG-Testzentrum Technik & Betriebsmittel, Gross-Umstadt Field test Forstliches Bildungszentrum Laubau Forstliches Bildungszentrum Königsbronn Authors P. Müßig, KWF, Gross-Umstadt J. Albert, DLG, Gross-Umstadt FPA/DLG-Test committee “Geräte und Werkzeuge“ (“Equipment and tools”) Chairman: Sebastian Paar, FBZ Laubau FPA / DLG-Approval until June 2016 In acknowledgment of the results of the test carried out by the KWF the approved product is also entitled to carry the following test marks: DLG-Testzentrum Technik & Betriebsmittel Groß-Umstadt Max-Eyth-Weg 1 Telephone: 069/24788-652 D-64823 Gross-Umstadt Fax: 069/24788/110 E-mail: [email protected] Internet: www.dlg-test.de Kuratorium für Waldarbeit und Forsttechnik e.V. (KWF) Forsttechnischer Prüfungsausschuss (FPA) Spremberger Strasse 1 Telephone: 06078/785-0 D-64823 Gross-Umstadt Fax: 06078/785 50 E-mail: [email protected] Internet: www.kwf-online.de ENTAM European Network for Testing of Agricultural Machines, is a cooperation between European test stations. ENTAM aims to distribute test results for agricultural and forestry equipment throughout Europe. For more information about the network visit www.entam.com or contact ENTAM at the following e-mail address: [email protected] 5/5
© Copyright 2024 Paperzz