MOBILE MAPWORKS
INSTALLATION GUIDE
16.00
May 2016
Contents
Product Documentation Copyright and Terms of Use ............................................................................ 3
Overview ....................................................................................................................................................... 6
Before You Install Mobile MapWorks ........................................................................................................ 7
Overview of Hexagon Geospatial Setup Manager ................................................................................... 9
Hexagon Geospatial Setup Manager User Interface .............................................................................. 10
Dialog Box Options ......................................................................................................................... 11
Installing Mobile MapWorks ..................................................................................................................... 13
Configuring Mobile MapWorks................................................................................................................. 17
Changing or Removing Mobile MapWorks ............................................................................................. 22
Removing Mobile MapWorks Configuration ........................................................................................... 23
Upgrade Mobile MapWorks from Version 13.00 to 15.00 ...................................................................... 26
Upgrade Mobile MapWorks from Version 14.00 to 15.00 ...................................................................... 27
Upgrade Mobile MapWorks from Version 15.00 to 16.00 ...................................................................... 28
Appendix - Complementary Software Setup .......................................................................................... 29
Complementary Software Setup Authoring Requirements ............................................................ 29
ProductInfo.xml............................................................................................................................... 31
Technical Support and Information ......................................................................................................... 34
Index ........................................................................................................................................................... 36
2
Contents
Product Documentation Copyright and Terms of Use
Copyright
© 2016 Hexagon AB and/or its subsidiaries and affiliates. All rights reserved. Hexagon has registered
trademarks in many countries throughout the world. Visit the Trademarks Page
http://www.hexagongeospatial.com/legal/trademarks for information about the countries in which the
trademarks are registered. See Product Page and Acknowledgments for more information.
Product Documentation Terms of Use
PLEASE READ THESE TERMS CAREFULLY BEFORE USING HEXAGON GEOSPATIAL’S
DOCUMENTATION ("DOCUMENT"). USE OF THIS DOCUMENT INDICATES ACCEPTANCE OF THIS
AGREEMENT WITHOUT MODIFICATION. IF YOU DO NOT AGREE TO THE TERMS HEREOF
("TERMS"), DO NOT USE THIS DOCUMENT.
Use Of This Document
All materials in this Document are copyrighted and any unauthorized use may violate worldwide copyright,
trademark, and other laws. Subject to the terms of this Agreement, Hexagon Geospatial (a Division of
Intergraph Corporation) and Intergraph’s subsidiaries ("Intergraph") hereby authorize you to reproduce this
Document solely for your personal, non-commercial use. In consideration of this authorization, you agree
to retain all copyright and other proprietary notices contained therein. You may not modify the Materials in
any way or reproduce or publicly display, perform, or distribute or otherwise use them for any public or
commercial purpose, except as specifically authorized in a separate agreement with Hexagon Geospatial.
The foregoing authorization specifically excludes content or material bearing a copyright notice or
attribution of rights of a third party. Except as expressly provided above, nothing contained herein shall be
construed as conferring by implication, estoppel or otherwise any license or right under any copyright,
patent or trademark of Hexagon Geospatial or Intergraph or any third party.
If you breach any of these Terms, your authorization to use this Document automatically terminates. Upon
termination, you will immediately destroy any downloaded or printed Materials in your possession or
control.
Disclaimers
ALL MATERIALS SUPPLIED HEREUNDER ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
NON-INFRINGEMENT. Hexagon Geospatial does not warrant that the content of this Document will be
error-free, that defects will be corrected, or that any Hexagon Geospatial Website or the services that
make Materials available are free of viruses or other harmful components.
Hexagon Geospatial does not warrant the accuracy and completeness of this Document. Hexagon
Geospatial may make changes to this Document at any time without notice.
3
Limitation Of Liability
IN NO EVENT SHALL HEXAGON GEOSPATIAL BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS,
REVENUE, DATA OR USE, INCURRED BY YOU OR ANY THIRD PARTY, WHETHER IN AN ACTION IN
CONTRACT OR TORT, ARISING FROM YOUR ACCESS TO, OR USE OF, THIS DOCUMENT.
Indemnification
You agree to defend, indemnify, and hold harmless Hexagon Geospatial, its officers, directors,
employees, and agents from and against any and all claims, liabilities, damages, losses or expense,
including reasonable attorneys' fees and costs, arising out of or in any way connected with your access to
or use of this Document.
Use Of Software
Use of software described in this Document is subject to the terms of the end user license agreement that
accompanies the software, if any. You may not download or install any software that is accompanied by or
includes an end user license agreement unless you have read and accepted the terms of such license
agreement. Any such software is the copyrighted work of Hexagon Geospatial, Intergraph or its licensors.
Portions of the user interface copyright 2012-20nn Telerik AD.
Links To Third Party Websites
This Document may provide links to third party websites for your convenience and information. Third party
websites will be governed by their own terms and conditions. Hexagon Geospatial does not endorse
companies or products to which it links.
Third party websites are owned and operated by independent parties over which Hexagon Geospatial has
no control. Hexagon Geospatial shall not have any liability resulting from your use of the third party
website. Any link you make to or from the third party website will be at your own risk and any information
you share with the third party website will be subject to the terms of the third party website, including those
relating to confidentiality, data privacy, and security.
Trademarks
The trademarks, logos and service marks ("Marks") displayed in this Document are the property of
Hexagon Geospatial, Intergraph or other third parties. Users are not permitted to use Marks without the
prior written consent of Hexagon Geospatial, Intergraph or the third party that owns the Mark. "Intergraph"
is a registered trademark of Intergraph Corporation in the United States and in other countries. Other
brands and product names are trademarks of their respective owners.
Find additional trademark information http://www.hexagongeospatial.com/legal/trademarks.
Procedure For Making Claims Of Copyright Infringement
Notifications of claimed copyright infringement should be sent to Hexagon Geospatial by mail at the
following address: Intergraph Corporation, Attn: Intergraph Legal Department, P.O. Box 240000,
Huntsville, Alabama 35824.
US Government Restricted Right
Materials are provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure of Materials by the
U.S. Government is subject to restrictions as set forth in FAR 52.227-14 and DFARS 252.227-7013 et
seq. or successor provisions thereto. Use of Materials by the Government constitutes acknowledgment of
Hexagon Geospatial or Intergraph’s proprietary rights therein.
Contents
International Use
You may not use or export Materials in violation of U.S. export laws and regulations. Hexagon Geospatial
makes no representation that Materials are appropriate or available for use in every country, and access
to them from territories where their content is illegal is prohibited.
Hexagon Geospatial provides access to Hexagon Geospatial international data and, therefore, may
contain references or cross references to Hexagon Geospatial products, programs and services that are
not announced in your country. These references do not imply that Hexagon Geospatial intends to
announce such products, programs or services in your country.
The Materials are subject to U.S. export control and economic sanctions laws and regulations and you
agree to comply strictly with all such laws and regulations. In addition, you represent and warrant that you
are not a national of, or otherwise located within, a country subject to U.S. economic sanctions (including
without limitation Iran, Syria, Sudan, Cuba, and North Korea) and that you are not otherwise prohibited
from receiving or accessing the Materials under U.S. export control and economic sanctions laws and
regulations. Hexagon Geospatial makes no representation that the Materials are appropriate or available
for use in every country, and access to them from territories where their content is illegal is prohibited. All
rights to use the Materials are granted on condition that such rights are forfeited if you fail to comply with
the terms of this agreement.
Revisions
Hexagon Geospatial reserves the right to revise these Terms at any time. You are responsible for
regularly reviewing these Terms. Your continued use of this Document after the effective date of such
changes constitutes your acceptance of and agreement to such changes.
Applicable Law
This Document is created and controlled by Hexagon Geospatial in the State of Alabama. As such, the
laws of the State of Alabama will govern these Terms, without giving effect to any principles of conflicts of
law. You hereby irrevocably and unconditionally consent to submit to the exclusive jurisdiction of the
United States District Court for the Northern District of Alabama, Northeastern Division, or the Circuit
Court for Madison County, Alabama for any litigation arising out of or relating to use of this Document (and
agree not to commence any litigation relating thereto except in such courts), waive any objection to the
laying of venue of any such litigation in such Courts and agree not to plead or claim in any such Courts
that such litigation brought therein has been brought in an inconvenient forum. Some jurisdictions do not
allow the exclusions or limitations set forth in these Terms. Such exclusions or limitations shall apply in all
jurisdictions to the maximum extent allowed by applicable law.
Questions
Contact us http://www.hexagongeospatial.com/about-us/contact-us with any questions regarding these
Terms.
5
Overview
The Mobile MapWorks Installation and Configuration Guide provides information for installing Mobile
MapWorks.
Depending on your operating system, the instructions and pictures in this document may appear
slightly different from the software.
6
Before You Install Mobile MapWorks
Before You Install Mobile MapWorks
Before installing Mobile MapWorks ensure that:
1. System meets or exceeds the requirements for Mobile MapWorks 16.00 listed in the Mobile
MapWorks Supported Environments.
2. System updates are installed.
3. You have administrator privileges on the system where you want to install Mobile MapWorks.
4. Necessary prerequisites are installed:
For Windows Server 2008:

Internet Information Server (IIS) 7.0
(http://www.iis.net/learn/install/installing-iis-7/installing-iis-7-and-above-on-windows-server-2008-o
r-windows-server-2008-r2)

Microsoft® ASP .NET Model View Controller (MVC) 4.0 (http://www.asp.net/mvc/mvc4)

Microsoft® SQL Server Compact Edition 4.0
(http://www.microsoft.com/en-us/download/details.aspx?id=17876)
If after installing Mobiles MapWorks, there is "404 - File or directory not found" error message
when displaying http://localhost/mmw/getConfigurations web page, then Microsoft hotfix
http://support.microsoft.com/en-us/kb/980368 must be installed.
For Windows Server 2012:

Internet Information Server (IIS) 8.0
Add roles and features:

Go to Server Manager and click Add roles and features.

In the Server Roles section, choose Web Server (IIS).

In the Features section, choose .NET Framework 4.5 and ASP.NET 4.5.

In the Web Server Role section, choose:

Management Tools (IIS Management Console and Management Service).
7
Before You Install Mobile MapWorks

Under Security, choose Windows Authentication.

Under Application Development, choose .Net Extensibility 4.5, ASP .NET 4.5, and
both ISAPI entries.
For more information see:
http://www.iis.net/learn/get-started/whats-new-in-iis-8/installing-iis-8-on-windows-server-2012

Microsoft® ASP .NET Model View Controller (MVC) 4.0 (http://www.asp.net/mvc/mvc4)

Microsoft® SQL Server Compact Edition 4.0
(http://www.microsoft.com/en-us/download/details.aspx?id=17876)
8
Overview of Hexagon Geospatial Setup Manager
Overview of Hexagon Geospatial Setup Manager
Hexagon Geospatial Setup Manager (Setup.vbs) is a tool that you use to install and maintain Hexagon
Geospatial software. Once the software is installed, you can also use the tool to perform the following
software maintenance tasks:

Modify

Repair

Remove

Run configuration processes
If the following options are available for your site, you can also use Hexagon Geospatial Setup Manager
to

Install complementary software

Run the installation process in batch or silent mode.
If you are an application developer who wants to create a complementary software setup for
Hexagon Geospatial Setup Manager, see Appendix - Complementary Software Setup (on page 29).
9
Hexagon Geospatial Setup Manager User Interface
Hexagon Geospatial Setup Manager User Interface
The Hexagon Geospatial Setup Manager dialog box opens when you double click Setup.vbs to start the
installation process.
Depending on the installation media you are using, you also may see other Hexagon Geospatial
software products on this dialog box.
10
Hexagon Geospatial Setup Manager User Interface
Dialog Box Options
Software
The Software box displays the list of products and product bundles that you can install. Select these one
at a time to install or update the software. When you make a selection, the user interface updates to
display the current status of the software installation, which is reflected in the New Software or Installed
Software list.
Version
To the right of the Software box is the Version number of the selected product.
Documentation Links
Listed under the Version number are links that provide access to information about the selected software.
The Support link takes you directly to the Hexagon Geospatial website. If a document is not available for
the selected software, the corresponding link is disabled.
New Software or Installed Software
If no software products have been installed, the New Software box is displayed so you can install new
software. Once software is installed, the label of this box changes to Installed Software. The Version,
Status, and Action columns are explained below:
Version
Status
If you are installing software, this Displays an icon reflecting
the status of the software
field displays the version
you selected. See the
available for installation.
Icons section below for
If you are modifying, repairing, or
more information.
removing software, this field
displays the version currently
installed on your computer. This
is a read-only field.
Action
The links displayed under
Action change to reflect
what actions you can
perform during the
installation or update
process.
Configuration
This box may not be implemented for all product installations.
If additional configuration steps are required for your software, the Configuration box might open after
installation is complete. Or, you can select the application from the list and click Configure.
11
Hexagon Geospatial Setup Manager User Interface
Complementary Software
Complementary software is software that is useful for or needed to run your Hexagon Geospatial software.
Complementary software is available for your site only if an application developer creates it. For more
information, see Appendix - Complementary Software Setup (on page 29).
Icons
The following icons appear in the Status list. These icons and their corresponding tooltips change to
reflect the current status of the installation or update process.
Icon
New or Installed Software Configuration
Complementary Software
Indicates the selected
software is not installed.
Indicates the installed
application of the
selected software is not
configured.
Indicates the
complementary software is
available but is not
installed.
Or
Or
Or
Indicates an installation
failure. Check the Event
Log for information.
Indicates a configuration Indicates an installation
failure. Check the Event failure. Check the Event
Log for information.
Log for information.
Installation is in progress.
Configuration is in
progress.
Installation is in progress.
Installation is successful.
Configuration is
successful.
Installation is successful.
12
Installing Mobile MapWorks
Installing Mobile MapWorks
1. From your delivery media, double click Setup.vbs.
2. In the New Software box, click Install under Action.
13
Installing Mobile MapWorks
3. Click Next on the InstallShield Wizard Welcome screen.
4. Accept the terms in the license agreement, and then click Next to open the Custom Setup dialog
box.
14
Installing Mobile MapWorks
5. Optional: Click Change to change the installation folder on the Change Current Destination Folder
dialog box, and then click OK.
6. Click Next to continue with the installation.
15
Installing Mobile MapWorks
7. Click Install.
8. When the product is installed, click Finish.
9. After installation is complete, the Mobile MapWorks Configuration Wizard will automatically start (see
the Configuring Mobile MapWorks section).
10. Close the Hexagon Geospatial Setup Manager.
16
Configuring Mobile MapWorks
Configuring Mobile MapWorks
After installation is complete, the Mobile MapWorks Configuration Wizard will automatically start.
Alternatively, you can configure the product from the Hexagon Geospatial Setup Manager, as shown in
the image below, by selecting Configure.
17
Configuring Mobile MapWorks
1. Click Next on the Configuration Wizard Welcome screen.
2. If 'MMW' application is installed on the IIS, click Remove MMW Application. Then click Next.
18
Configuring Mobile MapWorks
3. If Mobile MapWorks application files exist in c:\inetpub\wwwroot\mmw, you can overwrite them by
checking Overwrite files. Then click Next.
19
Configuring Mobile MapWorks
4. There are two possible workflows from the Client License dialog box

If a license for Mobile MapWorks is not found, click Configure License and follow the
directions on the dialog box to get a license for Mobile MapWorks. Then click Next.

If a valid license for Mobile MapWorks is found, click Next.
20
Configuring Mobile MapWorks
5. To apply the configuration changes to the product, click Finish.
6. When the configuration has completed, click Close.
21
Changing or Removing Mobile MapWorks
Changing or Removing Mobile MapWorks
You cannot change your licensing configuration from the Configuration Wizard. To change your
licensing, run the Hexagon Geospatial License Administrator, which can be installed from Hexagon
Geospatial Setup Manager Supporting Software.
To change or remove Mobile MapWorks using Setup.vbs:
1. From the delivery media, run Hexagon Geospatial Setup Manager (Setup.vbs). Right click and
select Run as administrator.
2. Select Mobile MapWorks from the Software list box.
3. In the Installed software box Action list, click Modify, repair, or remove.
4. During the uninstall process, the Mobile MapWorks Configuration Removal Wizard automatically will
start (see the Removing Mobile MapWorks Configuration (on page 23) section).
5. Follow the prompts, and then click Finish.
The status of the installation is indicated by one of the status icons.
To change or remove Mobile MapWorks from Control Panel:
1. From the Start menu, navigate to Control Panel.
2. Select Programs and Features.
3. Select the product and click Modify, repair, or remove.
4. During the uninstall process, the Mobile MapWorks Configuration Removal Wizard will automatically
start (see the Removing Mobile MapWorks Configuration (on page 23) section).
5. Follow the prompts, and then click Finish.
22
Removing Mobile MapWorks Configuration
Removing Mobile MapWorks Configuration
During the uninstall process, the Mobile MapWorks Configuration Removal Wizard automatically starts.
1. Click Next on the Configuration Removal Wizard Welcome screen.
23
Removing Mobile MapWorks Configuration
2. Choose whether the Mobile MapWorks database and configuration files should be removed or left on
the server. Then click Next.
3. To apply configuration changes to the product, click Finish.
24
Removing Mobile MapWorks Configuration
4. When the configuration changes are completed, click Close.
25
Upgrade Mobile MapWorks from Version 13.00 to 15.00
Upgrade Mobile MapWorks from Version 13.00 to 15.00
An upgrade to the Mobile MapWorks 15.00 release requires you to uninstall the 13.00 version of Mobile
MapWorks.
Database and sample configuration files are uninstalled.
Before you uninstall Mobile MapWorks 13.00, you should back up the database and configuration files.

Database file location for the 13.00 version is C:\Program Files\Intergraph\Mobile
MapWorks\Program\App_Data.

Configuration files default location for the 13.00 version is C:\Program Files\Intergraph\Mobile
MapWorks\Program\Configurations.
In order to restore the old configuration, after you install Mobile MapWorks 15.00, copy the backed up files
to the appropriate locations:

Database file location for the 15.00 version is C:\inetput\wwwroot\mmw\App_Data.

Configuration files default location for the 15.00 version is
C:\inetpub\wwwroot\mmw\Configurations.
Make sure that IIS_IUSRS and IUSR users have write access to the Mobile MapWorks
configuration files and databases.
26
Upgrade Mobile MapWorks from Version 14.00 to 15.00
Upgrade Mobile MapWorks from Version 14.00 to 15.00
An upgrade to the Mobile MapWorks 15.00 release requires you to uninstall the 14.00 version of Mobile
MapWorks.
Database and sample configuration files are uninstalled.
Before you uninstall Mobile MapWorks 14.00, you should back up the database and configuration files:

Database file location for the 14.00 version is C:\Intergraph\Mobile
MapWorks\MMWConfigService\App_Data.

Configuration files default location for the 14.00 version is C:\Intergraph\Mobile
MapWorks\MMWConfigService\Configurations.
In order to restore the old configuration, after you install Mobile MapWorks 15.00, copy the backed up files
to the appropriate locations:

Database file location for the 15.00 version is C:\inetpub\wwwroot\mmw\App_Data.

Configuration files default location for the 15.00 version is
C:\inetpub\wwwroot\mmw\Configurations.
Make sure that IIS_IUSRS and IUSR users have write access to the Mobile MapWorks
configuration files and databases.
27
Upgrade Mobile MapWorks from Version 15.00 to 16.00
Upgrade Mobile MapWorks from Version 15.00 to 16.00
An upgrade to the Mobile MapWorks 16.00 release requires you to uninstall the 15.00 version of Mobile
MapWorks.
During uninstall process you can choose to keep Mobile MapWorks databases and configurations
files which are stored
in C:\inetpub\wwwroot\mmw\App_Dataand C:\inetpub\wwwroot\mmw\Configurations locations, by
checking 'Preserve settings'.
During install process you can choose to overwrite Mobile MapWorks databases and configurations
files, which are stored
in C:\inetpub\wwwroot\mmw\App_Data and C:\inetpub\wwwroot\mmw\Configurations locations, by
checking 'Overwrite files'.
Make sure that IIS_IUSRS and IUSR users have write access to the Mobile MapWorks
configuration files and databases.
28
Appendix - Complementary Software Setup
Appendix - Complementary Software Setup
The Hexagon Geospatial Setup Manager can execute complementary software setup steps from a
Windows script file called ComplementarySoftwareSetup.wsf. This file is provided on the delivery media in
the \Repository\MobileMapWorks folder. You can perform any complementary software deployment and
configuration steps in the stub job ComplementarySoftwareSetups defined in the script file
ComplementarySoftwareSetup.wsf. Any Windows-script-compatible scripting engine (such as Microsoft
Jscript and VBScript) or other script engines (such as Perl, REXX, and Python) can be used to author
complementary software setup steps.
The complementary software setup can be located on a network share, on a separate DVD, or on a single
DVD that contains both product and complementary software setups. If complementary software is
available and the ProductInfo.xml file is appropriately updated for your software, the Complementary
Software box appears after the initial software installation is completed. The following are examples of
complementary software:

.NET extensions

Industryware

Custom setups

Custom product extensions

Custom updates to application
Complementary Software Setup Authoring Requirements
The following are the complementary software setup authoring requirements:

Support both interactive and silent/batch modes.

Allow re-run to facilitate the editing/changing of complementary software that is already installed
and configured. The specific processing done in the re-run scenario depends on what you include
in the ComplementarySoftwareSetups job of your complementary software. When required, a
ComplementarySoftwareSetups job can support scanning, archiving, and loading configuration
settings from a previous version of the software. It can also upgrade or merge a previous version's
configuration settings and merge them with a new version's configuration settings.

Update the complementary software status at the following registry location after completion. (The
stub job ComplementarySoftwareSetups has sample code.)
29
Appendix - Complementary Software Setup
These registry settings are located in the registry tree.
HKEY_LOCAL_MACHINE\SOFTWARE\Intergraph\Mobile MapWorks\Configuration
Key Name
Description
ComplementarySoftware
Location of complementary software developed to
expand an SG&I core application. When this key does
not exist, the Hexagon Geospatial Setup Manager
displays the configuration status as Not Configured.
The value name is Status of type REG_WORD.
Valid values are 0 or 1.

The Hexagon Geospatial Setup Manager reads the complementary software status from the
registry location. When needed, your ComplementarySoftwareSetups job can store or cache the
parameters at the same registry location.

Publish the parameter list and supported options.

Log the completion of the complementary software setup in the Event log with a success or failure
message in both interactive and silent/batch modes.

In interactive mode, the complementary software setup completion displays a success/failure
message.
To create a script that installs complementary software:
1. In the \Repository\MMW folder, edit the stub job ComplementarySoftwareSetups defined in the
ComplementarySoftwareSetup.wsf file to meet your site-specific complementary software deployment
and configuration requirements.
2. In the \Repository\MMW folder, edit the ProductInfo.xml file to set the ComplementarySoftware
element’s DisplayName attribute value. Set the Visible attribute value to true (case sensitive).
3. If applicable, set the Reconfig attribute value to true (case sensitive).
4. If applicable, add UI arguments to the Arguments attribute of the ConfigurationFile element. Any
command line arguments specified in silent or batch mode will be passed to the
ComplementarySoftwareSetups job in the ComplementarySoftwareSetup.wsf file.
5. Deploy any complementary software setup files on a network share, on a separate DVD, or on a
single DVD that contains both the product software and the complementary software setups.
30
Appendix - Complementary Software Setup
ProductInfo.xml
ProductInfo.xml, delivered in the \Repository\MobileMapWorks folder, provides a way for you to follow a
software installation with complementary software installation steps. If the
ComplementarySoftwareSetup.wsf file stub script is appropriately completed with corresponding
modifications to the ProductInfo.xml file, the Complementary Software box appears on the Hexagon
Geospatial Setup Manager dialog box. Based on your site-specific requirements, you should only
change the ComplementarySoftware element attribute values in ProductInfo.xml. The other elements and
attributes are reserved for the Hexagon Geospatial products.
The following table lists the element and attributes in the ProductInfo.xml file for software information. See
ProductInfo.xsd to review the .xsd diagram.
Element
Attribute
Description
ProductInfo
DisplayName
Name that appears on the Software box.
Name
Path
Name that should be used in batch mode.
For example, MobileMapWorks.
Deployment location.
For example, \Repository\MobileMapWorks.
The following table lists the elements and attributes in the ProductInfo.xml file for complementary software
configuration and specifies the ones you can change. See ProductInfo.xsd to review the .xsd diagram.
Element
Attribute
Description
ComplementaryS
oftware
DisplayName
Name of your complementary software that
appears on the Complementary Software
box Application field.
Set to true so that the software is visible on
the Hexagon Geospatial Setup Manager
dialog box. The default value is false. The
value is case sensitive.
Set to true if your complementary software
setup needs to reinstall when the selected
software is upgraded or modified. The
default value is false. The value is case
31
Appendix - Complementary Software Setup
sensitive.
ConfigurationFile
Name
Name of the executable that launches your
complementary software steps. No
configuration or change is recommended.
Arguments for batch or silent installation.
Switch for silent or batch mode. No
configuration or change is recommended.
StatusLocation
KeyName
Registry location to store the
complementary software is
HKEY_LOCAL_MACHINE\Software\Intergr
aph\Mobile MapWorks
\Configuration\ComplementarySoftware.
No configuration or change is
recommended.
Valid values are 0 or 1. No configuration or
change is recommended.
Registry. No configuration or change is
recommended.
32
Appendix - Complementary Software Setup
33
Technical Support and Information
Hexagon Geospatialprovides several ways to access information and to contact support, including
self-help tools, Hexagon Geospatial Community, Hexagon Geospatial Developer Network, and phone
support.
Hexagon Geospatial Community
You can find support-related discussion boards and knowledge bases across the Hexagon Geospatial
products on the Hexagon Geospatial Community http://community.hexagongeospatial.com. Find more
information about the community on a Community blog
http://community.hexagongeospatial.com/t5/Community-Blog/A-guide-to-using-the-Community/ba-p/1341.
Blogs
Get the latest on our technologies: from what engineering is working on, to news about the latest APIs, as
well as developer tips and tricks.
Discussions
Discuss topics with other Hexagon Geospatial Product pioneers and experts.
Knowledge and Support
Learn more about our products, find answers, get the latest updates, and connect with other Hexagon
Geospatial Community members, or get support from our support teams
http://www.hexagongeospatial.com/support.
Developer Network
Share technical information with other developers who use Hexagon Geospatial's SDKs and M.App
Portfolio. To get full access to the Developer Network you need to purchase a Hexagon Geospatial
Developer Network (HGDN) Subscription. With HGDN, you get broad access to select Hexagon
Geospatial development products use in one place. You will also get access to powerful toolkits, including
currently published APIs and SDKs. You also get access to in-depth resources such as tutorials,
collaborative samples, and web-based training.
Find more information about HGDN on a Community blog
http://community.hexagongeospatial.com/t5/About-the-Community/HGDN-Subscription/ba-p/3597.
eTraining
Short, to-the-point videos showcasing specific workflows for many tasks and organized by product. We
add new videos constantly, so check back often.
Tutorials
Written, step-by-step instructions for our most asked-about tasks. Includes helpful hints and introduction
material to get you started with our products.
34
Technical Support and Information
Professional Service Team
For support phone numbers or to submit sales inquiries, general questions, and comments, click the
appropriate tabs at the top of the Hexagon Geospatial Support
(http://www.hexagongeospatial.com/support) page.
35
Index
Upgrade Mobile MapWorks from Version 15.00
to 16.00 • 28
A
Appendix - Complementary Software Setup • 29
B
Before You Install Mobile MapWorks • 7
C
Changing or Removing Mobile MapWorks • 22
Configuring Mobile MapWorks • 17
H
Hexagon Geospatial Setup Manager User
Interface • 10
I
Installing Mobile MapWorks • 13
O
Overview • 6
Overview of Hexagon Geospatial Setup
Manager • 9
P
Product Documentation Copyright and Terms of
Use • 3
R
Removing Mobile MapWorks Configuration • 23
T
Technical Support and Information • 34
U
Upgrade Mobile MapWorks from Version 13.00
to 15.00 • 26
Upgrade Mobile MapWorks from Version 14.00
to 15.00 • 27
36