Product Bulletin
LINK® Fe 5
Product Information
Guaranteed Analysis
LINK Fe 5 is a 7-0-0 liquid solution with 5% iron that includes
2.75% sulfur, 2% manganese and humic acid.
LINK Fe 5 is an excellent source to add color without growth and
also can aid in correcting iron and manganese deficiencies.
LINK Fe 5 is partially chelated to give a fast but stable iron
greening effect.
Sulfur (S)............................................................................................. 2.75%
Iron (Fe)............................................................................................. 5.00%
2.50% Chelated Iron
Manganese (Mn)............................................................................. 2.00%
1.00% Chelated Manganese
Product Features and Benefits
• Includes 5% iron and 2% manganese, which are essential in
the formation of chlorophyll
• Partially chelated to give immediate and stable green-up
Total Nitrogen (N)............................................................................. 7.00%
1.00% Nitrate Nitrogen
6.00% Urea Nitrogen
Derived from: Urea, Ferrous Sulfate, Ferrous Citrate,
Manganese Nitrate, and Manganese Citrate.
Also contains non-plant food ingredient:
0.50% Humic Acid derived from Leonardite.
• Contains humic acid to improve nutrient availability
Product Application
TURFGRASS
Greens and Tees: Apply 2-4 ounces per 1,000 sq. ft. with
sufficient water to prevent tip burn (1-2 gallons). Repeat as
needed. Corresponding rates per acre are 2¾-5½ quarts in
40-80 gallons of water.
Fairways and Lawns: Apply 4-6 ounces per 1,000 sq. ft. with
sufficient water to prevent tip burn (1-4 gallons). Repeat as
needed. Corresponding rates per acre are 5½-8¼ quarts in
40-160 gallons of water.
ORNAMENTALS
Foliar Spray Rates:
Herbaceous Plants: Apply 1-2 pints per 100 gallons of water and
spray to runoff.
Trees and Shrubs: Apply 2-4 quarts per 100 gallons of water and
spray to runoff.
Palms: Apply 1-2 quarts per 100 gallons of water and spray to
runoff.
Injection Rates: Apply at a rate of 15-30 ppm of iron.
Use as part of a comprehensive Total Nutrition System® for
optimizing plant growth, development, yield and quality. For
more information contact your Wilbur-Ellis nutrition specialist.
ag.wilburellis.com
PPM of iron conversion rate: For 15 ppm of iron, prepare
a stock solution of 2-1/2 gallons of LINK Fe5 in 50 gallons of
water and inject stock solution at a ratio of 1:200.
952.898.5562
For information only. Not a label. Prior to use, always read and follow the product label directions.
WILBUR-ELLIS Logo, Ideas to Grow With, LINK, and Total Nutrition System are
registered trademarks of Wilbur-Ellis Company. K-0113-018