Nordberg
GP Series cone crushers
PRODUCT PRESENTATION
PRODUCT PRESENTATION
Nordberg GP Series fulfilling all your crushing
needs
GP100S
GP200S
GP300S
GP500S
GP100
GP11
GP220
GP300
GP550
2
Nordberg GP cone crushers have been
developed to crush feed materials into
desired end products efficiently, reliably, and
economically.
Metso’s Mining and Construction, the
global leader in rock crushing technology,
has developed the Nordberg GP cone crusher series to fulfill all crushing needs.
Incorporating the latest crusher know-how,
the Nordberg GP Series combines the highest crushing efficiency and end product
quality with the lowest per ton production
costs.
Nordberg GP series crushers embody the
100+ years of commitment to first-class
crusher design and product development at
Metso. As a result, the GP Series offers several outstanding features that enable you to
work efficiently in any secondary, tertiary or
quaternary crushing applications.
If your aggregate or mining business
demands big capacities, first-class cubicity
or full mobility, you will find a Nordberg GP
crusher optimized for your needs. The GP
Series crushers also provide you with unlimited possibilities in smooth process adaptation and full crushing process automation.
All of this is backed by our worldwide, comprehensive pre- and aftersales support services.
Take a closer look at the Nordberg GP
Series crushers. You will be sure to find a GP
cone crusher ideally suited to your needs.
Table of contents
Nordberg GP Series - fulfilling all your crushing needs...................................3
High performance - low operating costs ................................................................4
A wide cavity selection and automation as standard features...................6
Easy adjustment for production requirements ....................................................8
Total control of crusher and process .......................................................................10
Life cycle services - adding customer value .......................................................12
GP Series secondary cone crusher specifications ...........................................14
GP Series tertiary cone crusher specifications ...................................................18
Why to choose a GP cone? ............................................................................................22
3
PRODUCT PRESENTATION
PRODUCT PRESENTATION
Lokotrack LT300GP mobile crushing plant in a three-stage mobile
crushing application in Finland.
Nordberg GP550 cone crushers in Norway.
High performance - low operating costs
The high power levels made possible by the
robust design of GP cone crushers translate
into high productivity. Proven heavy-duty
design and use of high quality components
with optimized wear parts keep operating
costs down.
Easy adjustability
Several stroke options allow GP cone crushers to maintain maximum crushing efficiency in varying crushing applications. The
choke feed arrangement is set by simply
choosing the correct stroke for the GP cone
crusher – the most efficient crushing action
is easily achieved.
High performance by design
Optimized cavity designs by the industry
leader provide maximum yields for required
high quality end products.
The steep head angle in secondary GP
cone crushers guarantees trouble-free operation in varying feed conditions with a high
reduction ratio.
Continuing process and crusher control
ensures high availability with optimum production levels of high quality end products.
The Nordberg GP cone crusher is the right
machine to maximize your profitability.
An example of a stationary GP300S installation.
4
5
PRODUCT PRESENTATION
PRODUCT PRESENTATION
Nordberg GP500S cone crushers in operation.
A wide cavity selection
and automation as standard features
Nordberg GP cone crushers can be easily
adjusted for different production requirements. With a wide selection of cavities, the
same crusher can be used in 2nd, 3rd or 4th
crushing stages, producing different end
product sizes.
Several stroke options
The stroke change feature allows crusher
through-put to be easily adjusted to work in
harmony with the rest of the crushing plant.
The adjustable stroke also allows you to
attain proper choke feed conditions and
optimum crusher settings, ensuring the
maximum yield of a required end product
size.
IC50 automation
The IC50 automation system offers a variety
of control modes for various production
requirements. Machines can operate with a
fixed setting to achieve constant output gradation. The automation system can also
automatically adjust the closed side setting
to compensate the wear under load, ensuring that the optimum setting is always used.
If reduction work needs to be maximized,
the IC50 automation system can automatically and continuously adjust the setting to
keep power draw and crushing force at the
desired levels.
Superior reliability
The reliability and safe operation of the new
Norberg GP series cone crushers are the
result, among other things, of their highquality steel. Their reliability in demanding
crushing applications is guaranteed by
Metso’ acclaimed metallurgical know-how,
and on-going development projects involving manganese materials and metallurgical
compounds.
The New Nordberg GP220 cone crusher has been engineered without compromises to
withstand any quarry or mining application. It comes with significantly improved features
and benefits as a standard, making it the leading crusher within its size-class.
6
7
PRODUCT PRESENTATION
PRODUCT PRESENTATION
Nordberg GP550 feed opening.
GP cone crushers feature low installation height thanks to optimized
piston design.
Easy adjustment
for production requirements
Continuous research and product development has taken advantage of the simple
concept of the floating shaft type design to
ensure reliability. The exceptionally large
diameter of the main shaft, and the heavyduty main frame provide robustness.
Automation contributes significantly to
ensuring the unit’s reliable operation.
Low production costs
Metso has used its long experience in liner
profile design, and its know-how in wear
part metallurgy to minimize the cost of
worn manganese per tons produced.
Our automation system ensures minimum
cost per ton production by keeping the cavity full, compensating for wear, maximizing
the availability of the unit, and offering valuable operating data.
Full process adaptability
Nordberg GP series cone crushers are
designed to give maximum performance in
a wide variety of crushing processes: from
secondary to extra fine crushing, and from
stationary to highly mobile applications. Full
process adaptability is the result of being
able to use several different crushing cavities
in the same frame structure. This feature
ensures that you are always able to adapt
your GP to the crushing process.
Large feed opening
The GP concept allows big feed openings
with a fairly small cone diameter. This is
especially important in secondary applications as it means you can open your primary
jaw crusher wider, potentially increasing the
capacity of your plant. GP crushers in the
secondary line can also be used in gravel
pits as primary crushers.
Performance of Metso crushers is certified at a local research center.
8
9
PRODUCT PRESENTATION
PRODUCT PRESENTATION
Total control
of crusher and process
Advanced automation
Automation is playing an increasing role in
the development of crushing processes
today. The Nordberg IC50 automation unit
comes as standard in most GP Series cone
crushers. This contributes significantly to the
efficiency and availability of the crusher. The
IC50 automation unit guarantees constant
choke feeding. It also improves the liner utilization rate and thus the end product quality by promoting inter-particle crushing. The
automation system keeps crushing at maximum operational limits and within safety
margins. The Nordberg IC50 also records
production information and crusher performance. It gives graphic trending of up to
24 hours of operation, which improves
reporting capabilities. Automation makes it
possible to perform analyses and corrective
actions based on process variations, and to
decrease the need for wear part calibration.
Friendly for the operator
Advanced automation, easy adjustment, and
a limited number of maintenance points
make the Nordberg GP Series particularly
operator friendly. The automation system
aids the operator in finding the right crusher
settings quickly and easily. Less operator
observation during crushing is required.
Hydraulic adjustment of the crusher is safe
and fast, and can be performed continuously under crushing load. For service, GP cone
crushers can be dismantled completely from
above. Changing the liners does not require
backing materials thanks to the machined
wear parts. A pressurized sealing system
keeps the crusher cleaner, resulting in longer
filter change intervals and more reliable
crusher operation.
10
A complete Norberg GP cone crusher set up with IC50 automation unit
11
Customer Service
Customer Service
Comprehensive Metso service products include wear part replacements, inspections, repair and maintenance.
Regular inspections help to prevent mechanical and electrical failures
adding equipment availability.
Life cycle services adding customer value
Inspection services
Experience has shown that regular inspections are key in achieving production goals
related to quality, quantity, and time. Regular
inspections help prevent mechanical and
electrical failures from having a direct
impact on equipment availability and productivity. Metsos’ certified customer service
team helps you reach your goals.
Wear part replacement service
The wear part replacement service offers
delivery and replacement of wear parts as
well as crusher inspection. Our professional
crews replace wear parts safely and efficiently, and - in addition - evaluate crushing
equipment condition and wear.
Repair and maintenance services
Metsos’ service network is available to provide regular and corrective maintenance
services. Our repair facility network offers an
extensive range of services from bearing
replacement to complete equipment reconditioning. Our repair facilities offer highly
skilled personnel and the latest technology
to handle any equipment repairs.
12
Process optimization
and performance-based services
We also support customers by evaluating
the best way to perform operations and
maintenance activities with our process
optimization services. Our company has the
process expertise to recommend improvements such as liner design optimization and
upgrades for existing equipment - all to
improve your productivity.
The objective of our performance-based
services is to assist you in achieving the performance values and operational targets
your company requires.
Metso plant operation services
Metso offers plant operation services which
place our employees at the customer’s location to handle the planning, supervision,
operational support, and maintenance of
Metso equipment.
Metso life cycle services cover all aspects
of the crushing, size reduction, and classifying processes, and are designed to
improve your end-product value.
Please contact your local sales unit or
dealer for more information.
13
TECHNICAL INFORMATION
TECHNICAL INFORMATION
Main Components
1 UPPER FRAME PROTECTION
2 INTERMEDIATE FRAME
3CONCAVES
4MANTLE
5 LOWER FRAME PROTECTION
6 LOWER FRAME
7 SETTING SENSOR
8 THRUST BEARING SET
9 CYLINDER COVER
10 MAIN SHAFT PROTECTING SLEEVE
11 TOP BEARING
12 UPPER FRAME
13 MAIN SHAFT
14 HEAD
15 THRUST BEARING
16 GEAR
17 PINION
18 COUNTERSHAFT
19 COUNTERSHAFT HOUSING
20 FRAME BUSHING
21 ECCENTRIC SHAFT
22 ECCENTRIC BUSHING
23 PISTON
GP Series secondary
cone crusher specifications
E
J
A
D
G
H
F
C
B
I
MODEL
GP100S
GP200S
GP300S
GP500S
Total weight, kg *)
Max lift during maintenance, kg
Dimensions
A
B
C
D
E
F
G
H
I
J**)
J***)
Motor size, kW
Stroke options
7350
2500
10900
3500
16200
5200
33300
11000
2328
Ø 1300
908
Ø 1320
Ø 1360
566
1442
1400
1090
2416
2600
75-90
16, 20, 25
2461
Ø1735
1165
Ø 1540
Ø 1475
454
1527
1448
1312
2487
2990
110-160
18, 25, 28, 32, 36
2546
Ø 1860
1401
Ø 1820
Ø 1686
499
1582
1700
1400
2550
3230
132-250
18, 25, 28, 32, 36, 40
3227
Ø 2300
1587
Ø 2280
Ø 2372
655
2100
2108
1589
3756
4420
200-355
18, 25, 28, 32, 36, 40
*) Basic machine without options. Weights given with heaviest cavity.
**) From dampers to top of feed hopper.
***) From dampers to top of feed hopper with subframe.
14
15
TECHNICAL INFORMATION
TECHNICAL INFORMATION
GP100S
Indicative Crusher Capacities
Setting (c.s.s.)
20 mm
stroke
16 mm
80-90
stroke
20 mm
stroke
GP200S
GP300S
120-130
145-155
160-180
170-200
185-215
/4”
90-100
200-220
Capacity short t/h
1”
1-1/4”
50mm
80
210-230
1-1/2”
1-3/4”
2”
2-1/4”
1”
200-220
235-260
30
20
Setting (c.s.s.)
Capacity metric t/h
25 mm
30 mm
35 mm
110-140
stroke
25 mm
40 mm
45 mm
50mm
160-190
180-210
200-230
230-260
170-220
190-240
210-260
230-280
Setting (c.s.s.)
3
/4”
stroke
1”
stroke
1-1/4”
stroke
18 mm
stroke
25 mm
stroke
32 mm
stroke
40 mm
Setting (c.s.s.)
20 mm
3
/4”
1”
stroke
1-1/4”
stroke
1-5/8”
1-1/2”
1-3/4”
2”
155-185
180-210
200-230
250-280
200-250
225-275
250-275
260-310
310-380
Capacity metric t/h
25 mm
30 mm
35 mm
40 mm
45 mm
50mm
170-190
190-230
210-255
235-275
255-295
255-315
290-345
320-350
330-350
360-400
380-420
400-440
450-500
480-530
1
1- /2”
3
1- /4”
2”
225-270
255-300
285-320
300-350
350-400
370-390
380-430
430-480
260-320
1
No 30
No 16
2
4
No 8
8
No 4 1/4”
16
1/2”
32
64
1” 1 1/2” 2” 3”
MODEL
GP100S
M
200mm
8”
C
250mm
10”
GP200S
GP300S
GP500S
250mm
10”
280mm
11”
380mm
15”
330mm
13”
380mm
15”
500mm
20”
Cavities: M = medium, C = coarse, EC = extra coarse
2- /4”
500-550
Capacity metric t/h
50 mm
55 mm
60 mm
65 mm
70 mm
75mm
stroke
18 mm
300-350
325-375
375-425
400-450
425-475
450-500
500-550
stroke
25 mm
500-550
550-600
600-650
650-700
700-750
750-800
stroke
32 mm
650-700
700-750
900-950
stroke
40 mm
/4”
0.5
1
45 mm
3
0.25
No 100
EC
Setting (c.s.s.)
Setting (c.s.s.)
0.125
Nominal Feed Opening
220-270
190-240
0
2-1/4”
170-210
Capacity short t/h
1”
1-1/4”
200-220
/4”
3
stroke
280-350
130-160
/4”
3
cale
270-320
64 mm
2 1/2”
10
mm
230-280
Capacity short t/h
1”
1-1/4”
48 mm
1 7/8”
40
140-170
32 mm
32 mm
1 1/4”
50
200-230
20 mm
24 mm
15/16”
60
190-215
18 mm
16 mm
5/8”
70
165-175
/4”
stroke
stroke
90
135-145
/8”
Setting (c.s.s.)
GP500S
155-175
160-190
3
stroke
145-165
155-170
stroke
stroke
135-145
135-145
5
stroke
45 mm
120-130
115-125
stroke
stroke
40 mm
105-115
185-195
3
100
Capacity metric t/h
25 mm
30 mm
35 mm
25 mm
Setting (c.s.s.)
Indicative Gradation Curves
1-1/2”
Capacity short t/h
1-3/4”
2”
330-380
350-400
750-800
825-875
900-950
975-1050
2-1/4”
2-1/2”
2-3/4”
3”
400-460
460-520
520-580
560-620
840-900
stroke
1”
550-600
620-680
680-740
750-810
stroke
1-1/4”
(720-780)
800-860
860-920
940-1000
stroke
1-5/8”
930-990
1030-1100
Capacity and minimum setting figures are indicative for materials with bulk density of 1.6t/m (100 lbs/ft ). Actual results may vary depending on the
feed grading, rock type, moisture etc.
3
16
3
17
TECHNICAL INFORMATION
TECHNICAL INFORMATION
Main Components
1 UPPER FRAME PROTECTION
2CONCAVES
3MANTLE
4 LOWER FRAME PROTECTION
5 LOWER FRAME
6 SETTING SENSOR
7 THRUST BEARING SET
8 CYLINDER COVER
9 MAIN SHAFT PROTECTING SLEEVE
10 TOP BEARING
11 UPPER FRAME
12 MAIN SHAFT
13 HEAD
14 THRUST BEARING
15 GEAR
16 PINION
17 COUNTERSHAFT
18 COUNTERSHAFT HOUSING
19 FRAME BUSHING
20 ECCENTRIC SHAFT
21 ECCENTRIC BUSHING
22 PISTON
GP Series tertiary cone
crusher specifications
E
J
D
A
G
H
F
C
B
I
MODEL
GP100
GP11F
GP11M
GP220
GP300
GP550
Total weight, kg *)
Max lift during maintenance, kg
Dimensions
A
B
C
D
E
F
G
H
I
J**)
J***)
Motor size, kW
Stroke options
5800
1600
10700
3000
11900
3000
10200
2900
13400
3200
26500
6000
2038
Ø 1300
908
Ø 1320
Ø 1040
566
1167
1400
1090
2067
2250
75-90
16, 20, 25
2383
Ø 1649
1165
Ø 1700
Ø 1400
449
1513
1700
1400
2477
2660
132-160
20, 25, 30
2383
Ø 1649
1165
Ø 1700
Ø 1500
449
1520
1700
1400
2520
2700
132-160
20, 25, 30
2148
2181
Ø 1735
Ø 1860
1165
1401
Ø 1560
Ø 1820
Ø 1340
Ø 1480
455
499
1263
1275
1448
1700
1312
1400
2263
2239
2756
2920
132-200
200-250
18, 25, 28, 32, 36, 40 25, 28, 32, 36, 40
2771
Ø 2300
1589
Ø 2280
Ø 1775
629
1602
2113
1590
2887
3550
250-355
25, 28, 32, 36, 40, 45
*) Basic machine without options. Weights given with heaviest cavity.
**) From dampers to top of feed hopper.
***) From dampers to top of feed hopper with subframe.
18
19
TECHNICAL INFORMATION
TECHNICAL INFORMATION
8 mm
stroke
16 mm
40-50
45-55
60-70
80-90
stroke
20 mm
50-55
50-60
70-80
95-105
stroke
25 mm
55-65
75-90
105-120
Setting (c.s.s.)
GP11F
GP11M
GP220
GP300
/16”
/16”
85-95
1”
1-3/16”
Setting (c.s.s.)
10 mm
Capacity metric t/h
15 mm
20 mm
25 mm
30 mm
35 mm
40 mm
stroke
25 mm
140-160
160-180
190-210
240-260
270-290
310-330
350-370
stroke
32 mm
230-250
270-290
310-330
340-370
380-410
430-450
stroke
36 mm
290-310
320-340
380-410
430-460
480-510
1”
1-3/16”
1-3/8”
35 mm
1-3/8”
Setting (c.s.s.)
50-60
65-75
85-95
stroke
1”
180-200
210-230
260-290
300-325
340-360
390-410
55-60
55-65
75-85
100-115
stroke
1-1/4”
250-270
300-320
340-360
370-410
420-450
470-500
65-75
85-100
115-130
stroke
1-5/8”
320-340
350-370
420-450
470-510
530-560
1”
Setting (c.s.s.)
8 mm
20 mm
80-100
stroke
25 mm
stroke
30 mm
Setting (c.s.s.)
/4”
3
stroke
1”
stroke
1- /4”
/16”
5
85-105
Capacity metric t/h
10 mm
15 mm
20 mm
90-105
25 mm
30 mm
150-170
(170-190)
105-125
120-145
100-120
130-150
160-180
180-210
160-180
190-210
(210-230)
Capacity short t/h
19
/32”
/32”
/16”
13
Capacity and minimum setting figures are indicative for materials with bulk density of 1.6t/m (100 lbs/ft ). Actual results may vary depending on the feed
grading, rock type, moisture etc.
3
85-105
13
150-180
1”
1-3/16”
(185-205)
35 mm
100
95-115
120-140
130-155
165-185
110-130
140-175
175-195
195-225
90
175-195
210-230
(230-250)
80
1
Setting (c.s.s.)
15 mm
35 mm
40 mm
45mm
stroke
20 mm
105-125
120-145
150-170
170-190
180-200
200-220
220-250
50
stroke
25 mm
160-180
180-210
200-230
220-250
250-280
280-310
40
stroke
30 mm
190-210
210-230
240-270
270-310
300-340
330-360
Capacity short t/h
13
/16”
1”
1-3/16”
30
1-3/8”
1-9/16”
1-3/4”
200-220
220-240
240-275
/4”
3
/32”
19
120-140
130-155
165-185
185-205
stroke
1”
175-195
195-225
220-250
230-270
270-300
300-340
stroke
1-1/4”
210-230
230-250
260-295
295-340
330-370
360-390
Capacity metric t/h
10 mm
15 mm
20 mm
Setting (c.s.s.)
8 mm
stroke
18 mm
70-90
stroke
25 mm
stroke
32 mm
stroke
40 mm
Setting (c.s.s.)
/4”
3
stroke
1”
stroke
1-1/4”
stroke
1- /8”
/16”
5
75-100
25 mm
30 mm
35 mm
90-105
105-120
120-140
150-170
170-190
180-200
110-130
125-150
150-170
170-190
190-210
200-230
150-170
170-190
190-220
210-230
230-260
200-230
220-250
230-260
1”
1-3/16”
1-3/8”
165-185
185-210
195-220
Capacity short t/h
19
/32”
/32”
13
100-115
120-145
115-135
/16”
13
135-155
135-165
165-185
185-210
210-230
220-250
165-185
185-210
210-240
230-250
250-285
220-250
240-275
250-285
5
Setting (c.s.s.)
8 mm
Capacity metric t/h
10 mm
15 mm
20 mm
stroke
25 mm
100-120
110-130
135-155
160-180
190-210
210-235
240-260
stroke
32 mm
110-130
120-150
165-195
195-225
230-260
265-295
300-330
stroke
40 mm
150-170
205-235
245-275
290-320
325-355
Setting (c.s.s.)
/16”
Capacity short t/h
13
19
/32”
/32”
25 mm
30 mm
35 mm
1”
1-3/16”
1-3/8”
110-130
120-145
150-170
175-195
/16”
210-230
230-260
255-285
stroke
1-1/4”
120-145
135-165
180-215
210-245
250-285
295-325
320-355
stroke
1-5/8”
165-185
220-255
270-300
315-355
360-390
13
6 mm
1/4”
8 mm
5/16”
12 mm
15/32”
16 mm
5/8”
24 mm
15/16”
20
10
mm
cale
0
0.125
0.25
No 100
0.5
1
No 30
No 16
2
4
No 8
No 4
8
/4”
16
1/2”
32
64
1” 1 1/2” 2” 3”
Nominal Feed Opening
MODEL
GP100
GP220
GP11F
EF
40mm
1-1/2”
40mm
1-1/2”
F
50mm
2”
70mm
2-3/4”
MF
100mm
4”
90mm
3-1/4”
M
130mm
5”
120mm
4-3/4”
120mm
4-3/4”
C
150mm
6”
180mm
7”
200mm
8”
EC
1”
5
4 mm
5/32”
70
60
Setting (c.s.s.)
3
Indicative Gradation Curves
1-3/8”
Capacity metric t/h
20 mm
25 mm
30 mm
stroke
1-9/16”
45-55
stroke
stroke
19
/4”
3
stroke
Capacity short t/h
13
/32”
/16”
/32”
13
/8”
stroke
13
30 mm
13
stroke
stroke
Capacity short t/h
19
/32”
/32”
25 mm
5
5
stroke
20
Capacity metric t/h
10 mm
15 mm
20 mm
Setting (c.s.s.)
GP550
GP100
Indicative Crusher Capacities
EC-S
220mm
9”
GP11M
GP300
GP550
40mm
1-1/2”
40mm
1-1/2”
50mm
2”
80mm
3”
60mm
2-1/2”
90mm
3-1/4”
100mm
4”
130mm
5”
130mm
5”
180mm
7”
180mm
7”
180mm
7”
220mm
9”
220mm
9”
260mm
10”
280mm
11”
300mm
12”
Cavities: EF = extra fine, F = fine, MF = medium fine, M = medium, MC = medium coarse, C = coarse, EC = extra coarse,
EC-S = extra coarse special
21
Features and Benefits
Features and Benefits
Why to
choose a GP cone?
Stable performance
through liner life
Our cavity design reduces wear on the
feed opening and minimizes the deterioration of wear parts throughout the
life of the liner. This ensures stable
crusher through-put capacity and plant
operation through wear part life.
Dynamic setting adjustment
Crusher settings for power draw and
crushing force can be continuously
adjusted under load thanks to the IC50
automation system (standard for
GP220/GP200S, GP300/S, GP550/500S,
optional for other models). With the
automation system, the operation
mode can be set for one of two automatic drive mode options: setting
mode or load mode. The setting mode
maintains a constant setting. With load
mode selected the IC50 automation
system maintains constant power draw
while adjusting the setting and providing maximum crushing force.
Low installation height
GP cone crushers (valid for GP220/
GP200S, GP300/S, GP550/500S) possess
a patented piston design. The main
benefit of this design is lower installation height. This reduces installation
costs, with smaller support structures
and shorter conveyors needed, making
GP cone crushers an excellent solution
for mobile applications.
GP cone crusher versatility
With a liner change the same crusher
can be used as a secondary, tertiary, or
quaternary machine. Every model has a
broad selection of optimized liner
designs to ensure ideal operation across
a wide range of applications.
22
Can be operated with on/off feed
The spinning of the crusher head has
been minimized, enabling the machine
to run with an empty cavity. GP and
GP-S cone crushers are an excellent
choice for applications where choke
feed conditions cannot be ensured –
e.g. mobile, two-stage crushing plants
lacking a surge pile between the primary and secondary crushers.
IC50 automation system
as a standard part of delivery
(valid for GP220/GP200S, GP300/S,
GP550/500S). The IC50 automation system maximizes production, ensures
trouble-free operation, and simplifies
initial installation. The IC50 controls all
cone crusher related functions: crusher
setting, load, feed capacity, lubrication,
oil heating and cooling, and correct
start and stop sequences.
No backing material
needed for liner fixing
GP and GP-S cone crushers do not
require the use of backing material for
liner fixing. This makes liner changes
quick, easy, and cost effective.
Easy maintenance
GP and GP-S cone crushers can be disassembled from above. All heavy components can be lifted upwards, making
maintenance and service of the crusher
easy and safe.
Environmentally friendly
95% of the crusher weight is recyclable.
The environmental impact has been
minimized by optimizing the of amount
of oil needed for lubrication and by
removing the need for backing material
in liner fixing.
23
Product families:
Crushers
• C series jaw crushers
• SUPERIOR® gyratory crushers
• GP series cone crushers
• HP series cone crushers
• MP series cone crushers
• NP series horizontal impact crushers
• Barmac series vertical impact crushers
Screens
• DF series screens
• CVB series screens
• FS series screens
• TS series screens
• MF series screens
• RF series screens
Feeders
• TK series feeders
• VF series feeders
• LH.G series feeders
• VG series feeders
• PF series feeders
• HRBM series feeders
Mobile crushing and screening plants
• Lokotrack LT series track-mounted crushing plants
• Lokotrack ST series track-mounted screening plants
• Lokotrack CT and CW series track- and wheel-mounted conveyors
• Nordberg NW series wheel-mounted crushing and screening plants
Stationary crushing plants
• Complete plants for aggregates production
• Complete plants for recycling applications
All Metso Minerals Oy Tampere Works
equipment is produced in accordance
with a quality assurance system that
complies with the ISO 9001 standard,
as certified by Lloyd’s Register Quality
Assurance Limited.
AUSTRALIA AND NEW ZEALAND
Metso Minerals (Australia) Ltd
1110 Hay Street
West Perth, WA 6005
Australia
Phone: +61 8 9420 5555
Fax: +61 8 9320 2500
CHINA
Metso Minerals (Beijing) Ltd
19/F, The Exchange Beijing, Tower 4
No. 118 Jian Guo Lu Yi Chaoyang District
100022 Beijing
China
Phone: +86 10 6566 6600
Fax: +86 10 6566 2583
EUROPE, MIDDLE EAST AND AFRICA
Metso Minerals España, S.A.
C/ Rivas N° 4
28032 Madrid
Spain
Phone: +34 91 825 5700
Fax: +34 91 825 5740
INDIA AND ASIA-PACIFIC
Metso Minerals (India) Pvt Ltd
1st Floor, DLF Building No. 10,
Tower A, DLF Cybercity
DLF Phase II
Gurgaon 122002
India
Phone: +91 124 235 1541
Fax: +91 124 235 1601
NORTH AND CENTRAL AMERICA
Metso Minerals Industries Inc.
20965 Crossroads Circle
Waukesha, WI 53186
U.S.A.
Phone: +1 262 717 2500
Fax: +1 262 717 2504
RUSSIA AND OTHER CIS COUNTRIES
ZAO Metso Minerals (CIS)
Pulkovskoe shosse, 40/4 “A”
office building “Technopolis”
196158, St. Petersburg
Russia
Phone: +7 812 333 40 00
Fax: +7 812 333 40 01
SOUTH AMERICA
Metso Minerals Indústria e Comércio Ltda
Avenida Independência, 2500 - Éden
18087-050 Sorocaba
Brazil
Phone: +55 15 2102 1300
Fax: +55 15 2102 1696
www.metso.com
[email protected]
METSO´S MINING AND CONSTRUCTION
Lokomonkatu 3, P.O.Box 306
FI-33101 Tampere
Finland
Phone: +358 20 484 142
Fax: +358 20 484 143
Subject to alteration without prior notice, Brochure No. 2204-04-12-ESBL/Tampere-English,
© 2012 Metso, Printed in Finland
Metso´s Mining and Construction
crushing and screening equipment