Specimen Label
• Fast-acting microencapsulated formula
• Combines fast kill and residual control
• Kills Ants (excluding Fire Ants), Spiders, Scorpions, Fleas,
and other listed insects
• Kills mosquitoes, including the Aedes mosquito that may
carry and transmit Zika virus
KEEP OUT OF REACH OF CHILDREN
CAUTION
ACTIVE INGREDIENTS:
Esfenvalerate.................................................................................6.40%
Prallethrin.....................................................................................1.60%
Piperonyl butoxide.........................................................................8.00%
OTHER INGREDIENTS*................................................................84.00%
100.00%
*Contains petroleum distillates
See inside for first aid and precautionary statements.
DIRECTIONS FOR USE
• DO NOT leave product where children or pets can come into contact with it.
It is a violation of Federal law to use this product in a manner
inconsistent with its labeling.
USE RESTRICTIONS:
• Remove pets and birds and cover fish aquariums before spraying.
• Do not apply this product in patient rooms or in any rooms while occupied by the
elderly or infirm.
• DO NOT allow spray to contact food or food-containing surfaces, feed, or water supplies.
• Thoroughly wash dishes and food handling utensils with soap and water if they become contaminated with this product. Food utensils such as teaspoons and measuring cups must not be used for food purposes after use with pesticides.
• Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.
• Do not apply to classrooms while in use.
• Do not apply when food processing facility is in operation or foods are exposed. Do not apply this spray to surfaces or utensils that may come into contact with food.
• Do not apply in institutions (including libraries, schools, sports facilities, etc.) in the immediate area where occupants are present.
• In the home, cover exposed food and do not allow spray to contact food surfaces. If spray does contact these surfaces, clean surfaces with soap and water.
• Do not apply as a space spray in residential sites.
For control of insects, indoors and outdoors, in the following food and non-food areas such
as: homes, schools, warehouses, office buildings, apartment buildings, theaters, hotels,
industrial buildings, motels, kennels, livestock housing, food processing plants, food service
establishments, restaurants, supermarkets and grocery stores, transportation equipment,
truck trailers, railroad cars, and food manufacturing and warehousing establishments. Also
for use on back yards, lawns, trees, ornamental landscaping, recreational areas, parks and
athletic fields.
• DO NOT use this product as a fogger or apply it as a space spray.
• Use only in areas described.
• Remove pets and cover fish aquariums and pet’s food and water dishes before spraying.
• Keep all people (especially children) and pets out of areas being treated and restrict access to these areas until all surfaces are dry.
INSECTS CONTROLLED:
Ants (excluding Fire Ants)
Aphids
Asian Lady Beetles
Bed Bugs
Beetles
Boxelder Bugs
Brown Marmorated
Stink Bugs
Carpet Beetles
Cockroaches1
Crickets
Dog Ticks
Earwigs
Firebrats
Fleas
Kudzu Bugs
Mealybugs
Midges
Millipedes
Mites
Pillbugs
Psocids
Scales
Silverfish
Spiders
Springtails
Swarming Termites
Ticks
Waterbugs
STORED PRODUCT
PESTS:
Angoumois Grain Moths
Ants
Cadelles
Cigarette Beetles
Confused Flour Beetles
Dark Mealworms
Driedfruit Beetles
Drugstore Beetles
Flat Grain Beetles
Fruit Flies
Grain Mites
Grain Moths
Granary Weevils
Indian Meal Moths
Lesser Grain Borers
Maize Weevils
Meal Moth Larvae
Mediterranean Flour Moths
Merchant Grain Beetles
Red Flour Beetles
Rice Weevils
Rusty Grain Beetles
Sawtoothed Grain Beetles
Skippers
Spider Beetles
Spider Mites
Squarenecked Grain Beetles
Tobacco Moths
Yellow Mealworms
FLYING INSECTS:
Blow Flies
Chiggers
Clothes Moths
Cluster Flies
Crane Flies
Deer Flies
Face Flies
Fruit Flies
Fungus Gnats
Gnats
Horn Flies
House Flies
Mosquitoes
Small Flying Moths
Whiteflies
BITING AND
STINGING PESTS:
Bed Bugs
Bees
Biting Flies
Chiggers
Deer Flies
Deer Ticks
Dog Ticks
Fleas
Gnats
Kills German Cockroaches for up to 12 months (1 year) on indoor, unsealed concrete and/or cement surfaces only.
1
Hornets
Lice
Mosquitoes
Scorpions
Spiders
Ticks
Wasps
Yellowjackets
WOOD DESTROYING
PESTS:
Carpenter Ants
Carpenter Bees
Deathwatch Beetles
Furniture Beetles
Old House Borers
Powder Post Beetles
Roundheaded House Borers
Swarming Termites
PLANT PESTS:
Alfalfa Caterpillars
American Plum Borers
Annual Bluegrass Weevils
Aphids
Apple Maggots
Armyworms
Artichoke Plum Moths
Bagworms
Balsam Woolly Adelgids
Beet Armyworms
Billbugs
Blueberry Spanworms
Brown Marmorated
Stink Bugs
Cherry Fruit Flies
Cherry Fruitworms
Chinch Bugs
Codling Moths
Cowpea Curculios
Cranberry Fruitworms
Cranberry Weevils
Cucumber Beetles
Cutworms
(Continued on next page)
INSECTS CONTROLLED
(cont):
Diamondback Moths
Elm Leaf Beetles
European Pine Sawflies
Fall Webworms
Filbertworms
Flea Beetles
Grasshoppers
Green Cloverworms
Green Fruitworms
Gypsy Moth Caterpillars
Hickory Shuckworms
Imported Cabbageworms
Japanese Beetles
Kudzu Bugs
Lace Bugs
Leaf Feeding Caterpillars
Leafhoppers
Leafminers
Leafrollers
Leaftiers
Lesser Appleworms
Lesser Peachtree Borers
Loopers
Lygus Bugs
Mexican Bean Beetles
Mites
Mole Crickets
Naval Orangeworms
Northern Pine Weevils
Oriental Fruit Moths
Painted Lady Caterpillars
Pea Weevils
Peach Twig Borers
Peachtree Borers
PRODUCT INFORMATION:
Onslaught FastCap Spider & Scorpion Insecticide is a microencapsulated suspension
concentrate containing the following pounds of active ingredient per gallon: Esfenvalerate
(0.54 lbs.), Prallethrin (0.135 lbs.), Piperonyl butoxide (0.675 lbs.).
Onslaught FastCap Spider & Scorpion Insecticide combines fast kill (action) and long
residual activity against pests listed on this label when applied as surface or spot
treatments, injected into wall voids, or as a crack and crevice spray in and around
residential and commercial structures, as well as on turf and landscaping. Onslaught
FastCap Spider & Scorpion Insecticide may be sprayed on any surface that will not be
stained by water. Injector application equipment that delivers low volume treatments may
be used to make crack and crevice injections or spot and general surface treatments.
APPLICATION IN FOOD PROCESSING/HANDLING ESTABLISHMENTS:
Application is permitted within food and non-food areas of food service and handling
establishments (places other than private residences) including: restaurants, meat
processing plants, grocery stores, bakeries, food manufacturing and processing
establishments, and food warehousing establishments. Do not treat establishments where
livestock feed is present.
Food areas include areas for receiving, storing, packing, canning, bottling, wrapping,
boxing, preparing, edible waste storage, and enclosed processing systems, mills, and
dairies. Serving areas are places where prepared foods are served, such as dining rooms,
but excluding areas where foods may be prepared or held. Non-food areas include
garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker
rooms, machine rooms, garages, mop closets, and storage after canning or bottling.
General Surface Applications: Do not apply Onslaught FastCap Spider & Scorpion
Insecticide as a general surface application in food areas of the facility when the facility
is in operation or food is exposed. Do not apply directly to food. Cover or remove all food
and food processing equipment prior to application. After spraying in meat packing plants,
bakeries, and other food processing plants, wash with an effective cleaning compound,
and then rinse all equipment, benches, shelving, etc. where exposed food will be handled
with potable water. Repeat applications as needed, but do not exceed more than one (1)
application every fourteen (14) days.
Spot or crack & crevice applications:
Spot or crack and crevice applications may be made while facility is in operation, provided
exposed food is covered or removed from the area being treated. Do not apply directly to
food or food-handling surfaces. Repeat applications as needed, but do not exceed more
than one (1) application every fourteen (14) days.
MIXING INSTRUCTIONS:
Mix Onslaught FastCap Spider & Scorpion Insecticide with water and apply with hand
pressurized or power operated sprayers. Agitate container of Onslaught FastCap Spider &
Scorpion Insecticide before diluting by inverting it several times. Clean spray equipment
before and after use. For dilution, add approximately half the required water to spray
tank and then add the appropriate amount of Onslaught FastCap Spider & Scorpion
Insecticide. Agitate, and slowly add the remaining water. Agitate spray thoroughly before
using and also occasionally during use to ensure dispersion. If spray filter screens are
used, they should be 50 mesh or larger. Use 0.5 fl. oz. of Onslaught FastCap Spider &
Scorpion Insecticide in 1 gallon of water for light infestations or as a maintenance control
rate. Use 1.0 fluid ounce per gallon of water for heavy infestations or as an initial clean
out rate. Apply 2-second bursts of spray per square foot of area being treated. Do not
apply excessively; dampen surface but not to the point of saturation or runoff. Only dilute
Onslaught FastCap Spider & Scorpion Insecticide with water.
Onslaught FastCap Spider & Scorpion Insecticide may be sprayed on any surface that will
not be stained by water. If you are concerned about staining or are not sure if a surface is
water safe, test the surface by spraying a small amount in an inconspicuous area before
making a broad application.
The following chart indicates the percent of active ingredients that is in the sprayer tank
after mixing Onslaught FastCap Spider & Scorpion Insecticide at either rate:
Dilution Rate In Water
0.5 fl. oz. per Gallon
1.0 fl. oz. per Gallon
Final % concentration
of Active Ingredients
Final % concentration of
Active Ingredients
Esfenvalerate
0.025%
0.050%
Prallethrin
0.006%
0.012%
Piperonyl butoxide
0.031%
0.063%
TOTAL % Concentration
of all Actives
0.062%
0.125%
Pear Psyllids
Pear Slugs
Pecan Leaf Phylloxera
Pecan Nut Casebearers
Pecan Spittlebugs
Pecan Stem Phylloxera
Pecan Weevils
Pepper Weevils
Periodical Cicadas
Pickleworms
Pillbugs
Pine Chafers
Pine Coreid Bugs
Plant Bugs
Plum Curculios
Red Pine Sawflies
Redheaded Pine Sawflies
Red-striped Fireworms
Rindworms
Salt Marsh Caterpillars
Sap Beetles
Scales
Sod Webworms
Sowbugs
Spiders
Spittlebugs
Stink Bugs
Tarnished Plant Bugs
Tent Caterpillars
Thrips
Tobacco Hornworms
Tufted Apple Bud Moths
Velvet Bean Caterpillars
Walnut Husk Flies
Western Bean Cutworms
Whiteflies
Tank Mixing:
Onslaught FastCap Spider & Scorpion Insecticide may be tank mixed with an insect growth
regulator such as NyGuard® IGR Concentrate or pyrethrum-containing products or any
other currently registered pesticides unless expressly prohibited by the product label.
The resulting tank mix may be applied in areas where these products are allowed to be
sprayed. Do not tank mix Onslaught FastCap Spider & Scorpion Insecticide with products
containing dichlorvos (DDVP).
INDOOR USE:
Application Rates for Indoor Structural Pests:
Pests
Dilution Rate In
Water
Spiders and
Other Listed
Crawling Insects
Application
Rate of Mixed
Solution
Application Method(s)
1 Gallon / 1,000 sq. ft.
Light Infestation
0.5 fl. oz. / Gallon
Heavy Infestation
1.0 fl. oz. / Gallon
Listed Flying
Insects
0.5 fl. oz. / Gallon
Scorpions and
Other Listed
Stinging Insects
1.0 fl. oz. / Gallon
1 Gallon / 1,000 sq. ft.
Ticks
0.5 fl. oz. / Gallon
1 Gallon / 1,000 sq. ft.
Fleas, Lice
& Bed Bugs
0.5 fl. oz. / Gallon
1 Gallon / 1,000 sq. ft.
Apply as a coarse, wet spray
• Broadcast Surface Spray
• Crack & Crevice Treatment
1 Gallon / 1,000 sq. ft. • Spot Treatment
• Injected into Wall Voids
Apply as noted above, with
a fine particle spray.
Spiders, Scorpions, and other listed crawling insect pests indoors:
Apply as a coarse, wet spray to surfaces where these pests are normally found. Treat floors,
baseboards, around doors and windows, in attics, crawl spaces, eaves, corners, closets,
walls, utility pipes, storage areas, and all cracks and crevices. Treat underneath sinks,
dishwashers, refrigerators, stoves, the underside of shelves, drawers, cabinets, areas behind
pipes, and in all places where these insects shelter. Contact as many insects as possible
with direct spray. Repeat applications as needed, but do not exceed more than one (1)
application every seven (7) days.
For ant control indoors:
Apply to ant trails, around garbage receptacles, and near food sources. Also apply around
doors and windows and wherever these pests may find entrance to the structure. Remove
sources of food through basic hygiene practices whenever possible.
Listed flying insect pests indoors:
Treat insect resting areas such as walls and ceilings, screens, around windows, doors,
and light fixtures, and other surfaces that attract flying insects. Initiate treatments at the
beginning of fly season, and repeat treatments during periods of heavy infestation.
Listed stinging insect pests indoors:
Apply spray to nests late in the evening when stinging insects are at rest. Thoroughly spray
nest, nest entrance, and surrounding areas where insects land or walk. Treat around doors
and windows, in attics, crawl spaces, and possible harborage sites or points of entry.
For control of Brown Dog Ticks:
Thoroughly apply as a spot treatment to infested areas such as pet beds and resting areas,
nearby cracks and crevices, along and behind baseboards, window and door frames, and
localized areas of floor and floor coverings where these pests may be present. DO NOT
SPRAY PETS WITH THIS PRODUCT. Treat dogs and cats with a product registered for use
on animals.
For control of Fleas:
Thoroughly apply as a fine particle broadcast spray to infested rugs, carpets, and pet
resting areas. Prior to treatment, cover aquariums and fish bowls, and remove pet animals
from the area being treated. Do not permit humans or pets to contact treated surfaces
until spray has dried. Remove pet bedding and replace with clean, fresh bedding after
treatment. DO NOT SPRAY PETS WITH THIS PRODUCT. Treat dogs and cats with a product
registered for use on animals.
To control Bed Bugs:
Thoroughly clean and vacuum mattresses, box springs, floors, and surfaces. Treat
mattresses and box springs with an approved pesticide, such as a pyrethrin aerosol.
Apply Onslaught FastCap Spider & Scorpion Insecticide as a spot treatment to potential
harborage sites and migration paths, and cracks and crevices, around baseboards,
floorboards, headboards, wall voids and walls.
For control of listed stored product pests:
Spray thoroughly around and into floor drains, non-food conveyors, benches, pipes, pallets,
moist areas, storage racks, pieces of equipment, and other areas where stored product
pests may be found. Tank mix or sequential use of an insect growth regulator, such as
NyGuard® IGR Concentrate, is recommended to break the insect reproduction cycle. Do not
apply this spray to surfaces or utensils that may come in contact with food, since excessive
residues in food may result.
To treat voids in equipment and structures:
To kill insects harboring in wall voids and other inaccessible spaces in equipment and
structures, use injection equipment designed for deep void applications. Follow the
injection equipment manufacturer’s recommendations for proper set up and air pressures.
Place the applicator tip at or into the void space to be treated. For inaccessible voids, it
may be necessary to drill an access hole(s). Inject product into the void space in short
bursts, allowing air pressure to push insecticide deep into the space. Do not apply to the
point of runoff or drip. Ventilate area thoroughly before re-entry. Do not reapply more than
every fourteen (14) days.
To kill the accessible stages of listed granary insects:
Use this concentrate to treat grain storage facilities, and other listed areas, for stored
product pest control. For control of exposed adult and immature stages of stored product
pests, apply to cracks, crevices, and other surfaces where the pests have been seen or have
harborage. Treat areas where products are stored before filling with the product. Apply at
the rates listed above, using one gallon of spray mix per 1,000 square feet of surface area
to be treated. Cleaning all areas prior to use will increase levels of control. Remove and
destroy foodstuffs infested with pests.
Repeat application as needed, but do not exceed more than one application every fourteen
(14) days.
USE IN AND AROUND LIVESTOCK HOUSING:
For use in and around unoccupied areas of livestock facilities, such as: barns, cow and calf
pens & hutches, dairy barns & milk rooms, hog barns, horse barns, sheep barns, poultry houses,
and rabbit hutches. Do not contaminate milk, food, or drinking water. Remove animals from
area being treated. Cover feeders and waterers. Do not apply or allow insecticide to drift
onto animals. Do not allow animals to enter treated areas until spray solution has dried.
Pests
Dilution Rate In Water
Listed Crawling
Insects
*Including Litter Beetles
1 fl. oz. / Gallon
or
1 fl. oz. in sufficient water
to cover 1,000 sq. ft.
Listed Flying Insects
0.5 fl. oz. / Gallon
or
0.5 fl. oz. in sufficient
water to cover 1,000 sq. ft.
Outdoor application rates for spiders, scorpions and other listed pests:
Dilution Rate In Water
Treating Exterior Walls,
Foundations and
Structures
0.5 to 1 fl. oz. / Gallon
or
0.5 to 1 fl. oz. in sufficient water
to cover 1,000 sq. ft.
Treating Nests and
Harborage Areas of
Listed Stinging Insects
1 fl. oz. / Gallon
or
1 fl. oz. in sufficient water to
cover 1,000 sq. ft.
To Control Swarming
Termites and Listed
Wood Destroying Pests
1 fl. oz. / Gallon
or
1 fl. oz. in sufficient water to
cover 1,000 sq. ft.
Treating Ornamental
Trees and Landscapes
0.1 to 1.0 fl. oz. / Gallon
or
0.1 to 1.0 fl. oz. in sufficient
water to cover 1,000 sq. ft.
Mosquito
Breeding Sites
0.5 fl. oz. / Gallon
or
0.5 fl. oz. in sufficient water to
cover 1,000 sq. ft.
Treating Lawns
and Turf
0.1 to 1 fl. oz. / Gallon
or
0.1 to 1 fl. oz. in sufficient water
to cover 1,000 sq. ft.
or
4.3 to 43 fl. oz. per acre
Application Method(s)
Apply as a coarse,
wet spray
• General Surface Spray
• Crack & Crevice
Treatment
• Spot Treatment
• Injected into Wall
Voids
Listed crawling insect pests in livestock and poultry premises:
Apply as a general surface, spot treatment, and/or crack and crevice treatment. Apply to
floors and vertical and overhead surfaces where crawling insects are or may be present.
Treat stanchions, pipes, windows, doors, posts, cage framing, gates, under (but not in)
feeders, and other areas where insects hide or congregate. To reduce immigration of
insects, make a perimeter treatment around the outside of building foundations. Apply
in a uniform band 1 – 3 feet up the exterior foundation wall and 3 – 6 feet out from the
foundation.
Litter Beetle control in livestock and poultry premises:
To control Litter Beetles (Darkling, Hide, and Carrion Beetles), apply Onslaught FastCap Spider
& Scorpion Insecticide to walls and floors at cleanout and before reintroduction of animals.
Treat areas where beetles frequently occur, such as walls, supports, cages, cage framing, stalls,
and around feeders. To reduce immigration of insects, make a perimeter treatment around
the outside of building foundations. Apply in a uniform band 1 – 3 feet up the exterior
foundation wall and 3 – 6 feet out from the foundation.
Listed flying insect pests in livestock and poultry premises:
For residual control of listed flying insects, treat insect resting areas such as walls, ceilings,
screens, around windows, doors, light fixtures, and other surfaces that attract flying insects.
Initiate treatments at the beginning of fly season and repeat treatments during periods
of heavy infestation. Tank mix or sequential use of an insect growth regulator, such as
NyGuard® IGR Concentrate, is recommended to break the insect reproduction cycle.
OUTDOOR USE:
1. Applications to soil or vegetation, as listed on this label.
2. Applications to lawns, turf, and other vegetation, as listed on this label.
3. Applications to the side of a building, up to a maximum height of 3 feet above grade;
4. Application to underside of eaves, soffits, doors, or windows permanently protected
from rainfall by a covering, overhang, awning, or other structure;
5. Applications around potential pest entry points into buildings, when limited to a
surface band not to exceed one inch in width;
6. Applications made through the use of a coarse, low pressure spray to only those
portions of surfaces that are directly above bare soil, lawn, turf, mulch or other
vegetation, as listed on this label, and not over an impervious surface, drainage or
other condition that could result in runoff into storm drains, drainage ditches, gutters,
or surface waters in order to control occasional invaders or aggregating pests as listed
on this label.
USE RESTRICTIONS:
• Do not spray in or near fishponds or other bodies of water.
• Do not water the treated area to the point of runoff.
• Do not make applications during the rain.
• Do not apply directly to sewers or drains, or any area like a gutter where drainage to sewers,
storm drains, water bodies, or aquatic habitat can occur, except as directed by this label.
• Not for use on plants being grown for sale or other commercial use. Not for use in
nurseries, sod farms or golf courses.
• All outdoor applications, if permitted elsewhere on this label must be limited to spot or
crack and crevice treatments only, except for the following permitted uses, if allowed
elsewhere on this label:
Application
Method(s)
Apply as a coarse,
wet spray
• Crack & Crevice
Treatment
• Spot Treatment
• Broadcast
Spray Treatment1
Apply as a coarse,
wet spray
• Crack & Crevice
Treatment
• Spot Treatment
Apply as a spray
• Broadcast Spray
Treatment
• Foliar Spray
Treatment
Apply as a coarse,
wet spray
• Broadcast Spray
Treatment
1
Applications made through the use of a coarse, low pressure spray to only those
portions of surfaces that are directly above bare soil, lawn, turf, mulch or other
vegetation, as listed on this label, and not over an impervious surface, drainage
or other condition that could result in runoff into storm drains, drainage ditches,
gutters, or surface waters in order to control occasional invaders or aggregating
pests as listed on this label.
Treating exterior walls, foundations and structures:
To control infestations of listed pests, treat exterior surfaces of buildings, walls, window
frames, around garbage cans, eaves, cracks and crevices, porches, decks, gazebos, patios,
carports, siding, garages, fence lines, and other areas where pests are active or may
be hiding.
To help prevent insect infestation of buildings: Treat a 2 – 6 foot band of soil or other
substrate adjacent to buildings. Treat building foundation to a height of 2 – 3 feet. Treat
exterior walls, siding, eaves, cracks and crevices, and other areas where listed pests are
active, and may find entrance into building.
Apply with sufficient water to adequately cover the area being treated, but do not
allow dripping or runoff to occur. Alternate mixing directions are to use 2 to 4 fl. oz. of
concentrate per 50 gallons of water.
Listed Stinging insect control outdoors:
For listed stinging insects, apply spray solution to nests and harborage areas late in the
evening when stinging insects are commonly at rest. Thoroughly spray nest, nest entrance,
harborage sites, and surrounding areas where insects land or walk. For nests inside walls,
inject sufficient spray to treat nest. Do not use in areas where an electrical shock hazard
exists. For applications made when pests are active, applicator should wear protective
equipment as required. Repeat application when there are signs of renewed insect activity.
For Yellowjacket control, Onslaught FastCap Spider & Scorpion Insecticide can be mixed
with baits in traps. Follow trap instructions for preparation of bait.
Fleas and Ticks outdoors:
To control fleas and pet ticks, apply to kennels, runs, and other areas that pets have been
present. For best outdoor control of ticks, apply spray to vegetation, brush, branches, and
other areas near habitation where ticks may harbor or frequent. Treat the entire area and
retreat as necessary to maintain control. Do not apply to pasture or cropland and do not
allow animals and people to access to treated areas until the application has dried. DO
NOT SPRAY PETS WITH THIS PRODUCT. Treat dogs and cats with a product registered for
use on animals.
IF ON SKIN OR CLOTHING:
• Take off contaminated clothing.
Listed insect control in ornamental trees and landscapes:
For residential and commercial trees, shrubs, ground covers, and bedding and foliage
plants that will not be harvested for food, apply Onslaught FastCap Spider & Scorpion
Insecticide in appropriate volumes of water to obtain thorough coverage. Apply as a
full-coverage foliar spray, applying to the point of drip but not runoff. Treat active soil
pests with an application to surrounding soil. Repeat treatments as necessary to achieve
control, using higher application rates as pest pressure and foliage area increases.
Repeat applications as necessary, but no more than once every seven (7) days. Certain
plants may be sensitive to the final spray solution. A small-scale test is recommended
to verify safety to ornamental plants. Spray and observe for one (1) week prior to
application of an entire planting.
Have the product container or label with you when calling a poison control center
or doctor, or going for treatment. For information regarding medical emergencies or
pesticide incidents, call 1-888-740-8712.
Listed insect control on lawns, turf grass, and turf:
For best results, lawn or turf grass should be mowed 1 – 2 days before spraying. Treat
with spraying equipment or a hand sprayer. Use application volumes of up to 10 gallons
per 1,000 square feet to get uniform coverage when treating dense grass foliage. For
low volume applications using less than 2 gallons of spray solution per 1,000 square
feet, immediate irrigation with at least 0.25 inches of water is recommended to improve
effectiveness on sub-surface pests.
When hand spraying, spray using a slow, even sweeping motion, making sure to cover
the entire lawn or turf grass area where pests are observed. Spray under ornamentals
and trees. Repeat treatments may be necessary at 7 – 14-day intervals.
Rate range:
Use lower rate range for pests that are commonly exposed and will be contacted by
spray solution at the time of application. For pests that will not be contacted by spray
solution at the time of application, use the upper rate range. Use 1 fl. oz. per 1,000 sq.
ft. when treating Mole Crickets and Chinch Bugs.
To kill Swarming Termites: OUTDOORS ONLY
Apply spray mix as a coarse, wetting spray when swarming termites are seen emerging
from woodpiles, wooden fence posts, wooden structures, or from the ground.
Swarming usually occurs in the spring or at other times when a termite colony becomes
overcrowded and new reproductive termites with wings emerge and fly away to mate
and establish new colonies. This treatment will control the sprayed termites and will not
protect the structure from which the swarm is coming. Use only as a contact spray to kill
emerging reproductive (winged) and worker termites emerging from infested wood. This
treatment is not a substitute for a comprehensive termite control program.
To kill listed wood destroying pests: OUTDOORS ONLY
Apply spray mix as a coarse, wetting spray to exposed pests and to the damaged areas
of wood, spraying into galleries or tunnels in the exposed wood. Also, spray around
doors, window and door frames, and other areas where these pests may hide or enter
the house. Spray into cracks and crevices and, if necessary, drill small holes and spray
into inaccessible wooden structural voids where these pests are suspected.
• Rinse skin immediately with plenty of water for 15-20 minutes.
• Call a poison control center or doctor for treatment advice.
NOTE TO PHYSICIAN: Contains petroleum distillate. Vomiting may cause an aspiration
pneumonia hazard.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Harmful if swallowed. Causes moderate eye irritation. Avoid contact with skin, eyes or
clothing. Wear protective eyewear (goggles, face shield or safety glasses with side shields).
Wash hands thoroughly with soap and water after handling and before eating, drinking,
chewing gum, using tobacco or using the toilet.
ENVIRONMENTAL HAZARDS
This product is toxic to fish and other aquatic invertebrates. To protect the environment,
do not allow pesticide to enter or runoff into storm drains, drainage ditches, gutters or
surface waters. Applying this product in calm weather when rain is not predicted for the
next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off
the treatment area. Rinsing application equipment over the treated area will help avoid
runoff to water bodies or drainage system.
Do not discharge effluent containing this product into lakes, streams, ponds, estuaries,
oceans, or other waters unless in accordance with the requirement of a National Pollutant
Discharge Elimination System (NPDES) permit and the permitting authority has been
notified in writing prior to discharge. Do not discharge effluent containing this product
into sewer systems without previously notifying sewage treatment plant authority. For
guidance, contact your State Water Board or Regional Office of the EPA.
This product is highly toxic to bees and other pollinating insects exposed to direct
treatment or residues on blooming crops or weeds. Do not apply this product or allow it
to drift to blooming crops or weeds if bees or other pollinating insects are foraging in the
treatment area.
PHYSICAL OR CHEMICAL HAZARDS
Do not use this product in or on electrical equipment due to the possibility of
shock hazard.
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal.
PESTICIDE STORAGE:
Store in a cool, dry area under lock and key. Post as a pesticide storage area. Always
store pesticides in the original container. Store away from food, pet food, feed, seed,
fertilizers, and veterinary supplies. Place liquid formulations on lower shelves and dry
formulations above.
Mosquito breeding sites:
Mosquito populations may be reduced by application of Onslaught FastCap Spider &
Scorpion Insecticide to sites where mosquitoes rest, harbor, and breed. Apply spray
solution into tall grass, shrubbery, and around back yards and lawns where these pests
may hover or rest. Apply while air is still.
PESTICIDE DISPOSAL:
To avoid wastes, use all material in this container by application according to label
directions. If wastes cannot be avoided, offer remaining product to a waste disposal
facility or pesticide disposal program (often such programs are run by state or local
government or by industry).
Not for wide area mosquito abatement using aerial or truck mounted cold aerosol ULV
sprayers and thermal fogging devices.
CONTAINER HANDLING
Non-refillable container. Do not reuse or refill this container.
FIRST
AID
IF SWALLOWED:
[For containers with capacities equal to or less than 5 Gallons] Triple rinse as follows:
Empty the remaining contents into the application equipment or a mix tank and drain
for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and
recap. Shake for 10 seconds. Pour rinsate into the application equipment or a mix tank or
store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip.
Repeat this procedure two more times. Then offer for recycling if available, or puncture
and dispose of in a sanitary landfill or by incineration. Do not burn unless allowed by
state and local ordinances.
•C
all a poison control center or doctor immediately for treatment advice.
•D
o not give any liquid to the person.
•D
o not induce vomiting unless told to do so by a poison control center or a doctor.
•D
o not give anything by mouth to an unconscious person.
IF IN EYES:
•H
old eye open and rinse slowly and gently with water for 15-20 minutes.
• R emove contact lenses, if present, after the first 5 minutes, then continue rinsing eyes.
•C
all a poison control center or doctor for treatment advice.
EPA Reg. No. 1021-2574
EPA Est. No. 1021-MN-2
Rev. 0216a-0316
[For containers with capacities greater than 5 Gallons] Triple rinse as follows: Empty the
remaining contents into application equipment or a mix tank. Fill the container ¼ full
with water. Replace and tighten closures. Tip container on its side and roll it back and
forth, ensuring at least one complete revolution for 30 seconds. Stand the container on
its end and tip it back and forth several times. Turn the container over onto its other end
and tip it back and forth several times. Empty the rinsate into application equipment or a
mix tank or store rinsate for later use or disposal. Repeat this procedure two more times.
Then offer for recycling if available, or puncture and dispose of in a sanitary landfill or by
incineration. Do not burn unless allowed by state and local ordinances.
MGK®, NyGuard® are registered trademarks of MGK Company. Manufactured by MGK®.
©2016 MGK. All rights reserved.
8810 Tenth Avenue North, Minneapolis, MN 55427
2M-0416